Control your swimming pool with 1 device. With the Starline Poolcontrol you have the option to control your swimming pool pump, heating equipment and solar cover. But that is not everything. In addition, the Poolcontrol also has 3 switched outputs for other water treatment equipment, such as a disinfection device. With the option to digitally read the water, outside and solar temperature, the Starline Poolcontrol is a complete device that takes all the work off your hands.
How does the Starline Pool Control work?
Depending on the set wishes, the Poolcontrol has the option to switch the connected devices on or off separately. Because it also measures values such as the water temperature, the Pool Control also knows when to switch off a device again. When connecting a variable swimming pool pump, the Poolcontrol can also make it run harder or softer. This way you maintain optimal efficiency and it is also energy-friendly. The Poolcontrol is also equipped with a connection for an automatic backwash machine. This way, when backwashing, the system knows which devices need to be switched on or off and in what order.
What can I connect as standard to the Starline Poolcontrol?
Swimming pool pump, both normal (230V) and three-phase power (400V)
Heating element: For example a heat pump or an electric heater
Solar control: Connection for 3-way valve and solar temperature sensor
3 other devices: For example, a disinfection device or a dosing pump
Expansion options with level control, frost sensor and solar sensor
The standard Starline Pool Control can also be expanded with a level control. The Poolcontrol keeps track of the current water level using a sensor. It is also possible to connect a frost sensor that switches on the filter installation when the temperature drops below 1 degree. In addition, it can also switch on the heating element when the temperature drops below 0 degrees. The Pool Control is so smart that the filter installation and heating are automatically switched off again when the correct level is reached again.
Level control
Possibility to also read the current water level with the Poolcontrol and adjust accordingly. Possible in option.
Frost sensor
By measuring the current outside temperature you prevent the swimming pool or your pipes from freezing.
Solar sensor with stainless steel immersion tube
The solar control is standard in the Poolcontrol software. Do you also want to measure and control the solar devices via the Poolcontrol? Then you have a separate solar sensor here Stainless steel immersion tube necessary for
Features Starline Pool Control
Mains voltage: 230v OR 400V
Pump output: max. 8A 230V or 400V
Time clock: Electronic
Dimensions: 30 x 26 x 11.5 cm (lxdxh)
IP class: 54
Current limitation: 0-8 Amp adjustable
Filter pump run-on time: 0-10 minutes adjustable
Maximum water temperature: Set and sealed at 32 degrees. Max. 40 degrees
Connections Starline Poolcontrol
Heating: 230V or potential switched. Fused 4A/900 Watt
Water treatment connections: 3 x 900 Watt / fused 3x 4 Amp
Standard 230V connections for Roldeck control and water treatment equipment. Fused 4A/900 Watt
Standard 230V connection for automatic 6-way valve: 230V. Fused 4A/900 Watt
Connection 3-way tap for solar: 2 x 230V + 0 for solar or heating mode
Safety connections: Pump break contact, Flow switch and protection for automatic backwashing
Temperature sensor connections: Swimming pool water with stainless steel immersion tube (included) + Solar temperature and Outside air (optional)
Want to turn your normal swimming pool pump into an energy-efficient swimming pool pump? In other words, do you want to pay less energy costs and be environmentally conscious? The iSAVER+ 1100 is such a fantastic and cool device that makes this possible. This frequency controller converts the full frequency - at which a standard swimming pool pump normally runs - into other, lower frequencies.
In this way you can adjust the motor speed of your standard swimming pool pump - entirely according to your wishes. A swimming pool pump does not always have to run at full power. For example, simply set a low night setting, an average day setting and use full power to backwash.
A great solution if you want a variable pool pump, but your fixed speed pump actually still works very well. The iSAVER+ 1100 frequency controller is suitable for swimming pool pumps with a capacity of up to 1.1 kW.
Save up to 80% on energy
Via the iSAVER you can set the power - which speed (between 1200 and 2900 rpm) - your pool pump should run and when. Set an energy-efficient mode for different situations - different applications. The pump then automatically runs the set program at the indicated time. These energy-efficient settings ensure a drastic reduction in energy costs.
25% quieter
When the pump runs at a lower speed, the user experience is also a lot more pleasant. The lower the speed at which the pool pump runs, the less noise the pump makes. This reduces the noise level by up to 25%. Any neighbors will also be happy with it.
4 adjustable timers and 3 standard modes
During 1 day of 24 hours you have the option to set 4 different modes that you can time. So you set an individual setting for each swimming pool function. For example, consider a night mode, a start-up mode, a filtration mode and a heating mode. You attach a time limit to these positions, so that they automatically overlap. Even when the device switches off, the iSAVER remembers its last settings.
You can set settings yourself, but you can also use the standard settings. These are:
Night mode (low): speed fluctuates between 1200 and 1650 rpm
Day mode (average): speed fluctuates between 1700 and 2400 rpm
Day mode (high): speed fluctuates between 2450 and 2900 rpm
Longer lifespan of the pool pump
When your pump runs at a lower speed, it is less subject to wear. The mechanical seals in particular benefit from lower speeds. Your pump can last longer again.
Better filtration of the pool water
When the water moves more slowly, smaller dirt particles are removed from the pool much more easily. You can also help the person responsible for cleaning the swimming pool with the iSAVER.
Environmentally conscious win-win
Because you save up to 80% in energy (costs), the enormous greenhouse gas emissions also decrease. So a win-win situation.
Connect iSAVER+
Connecting the iSAVER+ 1100 is also very easy. It is a kind of extension of your standard pump plug. You plug the pump plug into the pump output of the iSAVER, and the plug of the iSAVER into the socket. Please note that you still have to hang the device somewhere and the cables must be long enough. The output cable of the iSAVER is approximately 93 cm, and the plug is approximately 88 cm. Always follow the instructions for use when installing the device.
The Electronic Buffer Tank Level Control provides a smart and efficient solution for managing water levels in buffer tanks. This advanced system is designed to take accurate measurements and automatically control various functions such as heating, backwashing, post-rinsing and solar pump operation. With connections for both solar sensors and water sensors, this system ensures that your water level is optimally controlled and the operation of your buffer tank is optimised. The electronic level control provides a reliable and user-friendly way to automate your tank management. Please note: the probe is not included and must be purchased separately. The Electronic Level Control for Buffer Tank is a reliable and smart solution for automatically managing your buffer tank, with connections for various functions and sensors, for more efficient water management.
The Level Controller without Solenoid Valve is designed for accurate and reliable water level control in various applications, such as swimming pools and water systems. This level controller offers functions such as water level control, dry-run protection, and forced pump operation to prevent the pump from running without water. With 6 indicator lights and an on/off switch on the front panel, it is easy to operate and provides clear status information. The robust plastic housing with a transparent cover provides durable protection, while the housing complies with protection class IP40. The level controller can be easily combined with most OSF controllers, making it versatile. The Solenoid Free Level Controller provides a reliable solution for managing water levels and protects your pump from dry running damage, while being easy to install and operate.
The 400V Countercurrent Swimming Device Switch and Protection Box provides advanced protection and control for swimming systems operating at 400V. This device is designed to detect and set overload and underload, with a capacity of up to 16A. It features a 4-digit LED display that shows real-time key data such as current consumption, maximum and minimum voltage, and alarms in case of abnormalities. The box is equipped with warning LEDs for immediate notification of overload or underload. For maintenance and monitoring, it stores working hours and the number of startups, so you can easily understand the usage. In addition, this box is compatible with both pneumatic and electronic controls, which offers flexibility and ease of use.
The Counter-current Swimming Device Switch and Protection Box, 400V ensures safe and reliable operation of your swimming system, with real-time monitoring and simple operation, giving you peace of mind and helping you optimally manage your system.
The Switch and Protection Cabinet for Countercurrent Swimming Devices provides reliable protection and control for swimming systems operating on 1 x 230 V or 3 x 230 V. This cabinet is equipped with advanced functions such as overload and underload detection and adjustment, with a capacity of up to 16A. The 4-digit LED display shows important data such as current consumption, maximum and minimum voltage, and gives an alarm in case of abnormalities. In addition, the cabinet stores the working hours and the number of starts, which is convenient for maintenance and monitoring. With warning LEDs for overload and underload, this system offers comprehensive protection and is compatible with both pneumatic and electronic controls. The Switch and Protection Box ensures safe and efficient operation of your counter-current swimming system, with real-time monitoring and protection against electrical abnormalities.
Control module for solar panels installed on an independent circuit. Suitable for controlling a pump of max. 8 A / 230 VAC.
Supplied with a 3m probe for cold water and 10m for hot water
water. Quick and easy installation.
Prevent your swimming pool, pipes and filter pump from freezing. This anti-freeze probe measures the temperature itself with the supplied probe and activates the filter installation when the temperature drops below 0 degrees, for example. Set the desired temperature at which the filtration should be activated. Prevent damage and choose safety with frost protection.
Features Anti-freeze probe
Suitable for existing installations
Electromechanical thermostat
Adjustable threshold temperature for starting filtration
Dimensions 6.2 x 6.2 x 9 cm