Floor and Wall Felt

Are you planning to partially or fully bury your city pool? If so, a drainage membrane is necessary. This Delta MS ensures that the wood does not get wet, thereby helping to prevent rot. The membrane is made of synthetic material and has a width of 1.5 meters. Supplied on a 20-meter roll. Air volume between the dimples for drainage A channel system is created between the dimples, allowing water to be drained away. This drainage membrane has an air volume between the dimples of 5.3 liters per square meter. The drainage membrane is made of material that is safe for drinking water. It is resistant to bacteria, alkalis, and chemicals. It is also root-resistant.

Read more less

Optimal protection for your built-in swimming poolThe W'eau Floor and Wall Felt is the ideal solution for protecting the floor and walls of your built-in swimming pool. This high-quality felt prevents mold growth and protects the pool liner against abrasive materials such as stones and rough surfaces. With a weight of 300 g/m² and a generous surface area of 75 m², it provides a durable and reliable base for a long-lasting and carefree swimming experience. Benefits of the W'eau Floor and Wall Felt ✅ Protection and durabilityThe felt creates a soft and resilient surface that prevents the liner from being damaged by sharp or rough materials. This reduces the risk of tears and extends the lifespan of your pool. ✅ Insulation and sound dampeningThanks to the high density of the polypropylene material, the felt offers excellent insulation and dampens sound, ensuring a quieter and more comfortable swimming experience. ✅ Easy installationThe roll, 1.5 meters wide and 50 meters long, makes it easy to cut the felt to size and attach it using pool adhesive. This allows you to effortlessly cover the entire pool surface so you can quickly enjoy your pool. ✅ Suitable for various pool typesThis felt is specially designed for wooden and structural built-in swimming pools and can be used on various surfaces. Installing the floor and wall felt Preparation: Ensure the surface is clean and level. Unrolling: Roll out the felt over the floor and walls of the pool. Cutting to size: Use scissors or a utility knife to make the felt fit perfectly. Attachment: Glue the felt in place using special pool adhesive. Installing the liner: Once the felt is securely attached, the liner can be installed. With the W'eau Floor and Wall Felt 75 m² - 300 g/m², you ensure that your pool liner remains optimally protected, allowing you to enjoy your pool for years to come without any worries!

Read more less

This polyester separation membrane forms a separating layer between the substrate and the subsequent finishing layer. The membrane weighs 420 g/m² and is supplied on a roll measuring 2 metres wide and 50 metres long. This provides 100 m² of material per roll, excluding cutting waste and any overlaps. The generous roll width is practical for covering larger areas. Cut the membrane to size for the intended application. Check beforehand whether the material is suitable for the substrate and the finish you want to combine it with. Separating layer The membrane helps prevent direct contact between two layers of material. When used in a pool shell, it must be compatible with the chosen pool liner and the specified finishing system. The separation membrane does not replace a leveling layer or waterproof liner. The substrate must therefore be sufficiently level, clean, and free from sharp protrusions beforehand. Practical size for larger areas With a width of 2 metres, you can lay wide strips. The roll length of 50 metres provides enough material to cover multiple areas from a single roll. Calculate the required quantity based on the area to be covered and the installation instructions. Allow for cutting waste at corners, penetrations, and other junctions. The net area to be covered may therefore be less than 100 m². Installation on cured concrete Avoid contact with uncured concrete to prevent damage to the polyester separation membrane. Only apply the membrane once the concrete has cured sufficiently and is suitable for further finishing. Also check that any adhesives and other materials are suitable for polyester and the chosen application. A carefully prepared substrate and correct installation help to achieve a uniform intermediate layer.

Read more less

The Polypropylene Anti-Mold Fleece 1.5 meters is a high-quality geotextile specially developed for use under pool liners and PVC foil. This professional pool felt is manufactured from 400 g/m² blue polypropylene and is treated with a fungicide (anti-mold) coating, which effectively prevents the growth of mold, bacteria, and other microorganisms between the pool structure and the liner. The fleece forms a protective layer between the sub-surface and the pool liner, providing better protection for the liner against damage from uneven surfaces, punctures, and wear. In addition, it provides a more comfortable feel underfoot and has an insulating effect, helping the pool water retain its temperature for longer. Thanks to its high tensile strength and puncture resistance, this pool felt is extremely suitable for both new construction and the renovation of inground and above-ground pools. Why choose the Polypropylene Anti-Mold Fleece? The Polypropylene Anti-Mold Fleece 400 g/m² offers optimal protection for your pool liner and increases both the comfort and the lifespan of your pool. Thanks to its fungicide treatment, excellent puncture resistance, and insulating properties, this professional geotextile is an ideal underlay for any high-quality pool installation.

Read more less