Are your swimming pool water levels not quite right? With W’eau pH Plus powder, you can easily increase the pH value of your pool, so the water is perfectly balanced again. A correct pH value (between 7.2 and 7.6) ensures that chlorine works better, the water feels more comfortable, and you can enjoy crystal-clear pool water worry-free.
This 1 kg pack is ideal for above-ground pools or smaller built-in pools. Thanks to its powder form, the product dissolves quickly and almost completely in the water.
Instructions for use
Always measure the current pH value of your pool water first.
A good pH value is between 7.2 and 7.6.
Mix the correct amount of powder in a bucket of warm or pool water (see packaging for dosage).
Add the solution slowly and evenly to the pool.
Done – your water is balanced again!
Safety instructions
Always add the powder to water, never the other way around.
Never use simultaneously with other chemicals such as chlorine.
Store in a dry, cool, and safe place.
Always consult the safety instructions on the packaging before use.
👉 With W’eau pH Plus Powder 1 kg, you keep your pool water balanced and ensure optimal swimming comfort.
Interline pH+ Plus – 1 kg is an effective granular product for increasing the pH value of swimming pool and spa water. A pH value that is too low (< 7.2) causes corrosion of pool components, skin and eye irritation, and reduced chlorine effectiveness. With pH+ Plus, you can easily restore the water balance to the ideal pH range of 7.2 to 7.6.
Dosage:
80 grams (= 80 ml) per 10 m³ of water increases the pH by approximately 0.1
Maximum of 300 grams (= 300 ml) per 10 m³ per treatment
The next treatment may only take place 12 hours later
Application:
First dissolve in a bucket of water
Then distribute evenly over the pool surface
Circulation pump must run for 3 to 4 hours during treatment
Calculate pool volume:
Rectangular: length × width × average water depth
Round: diameter² × average water depth × 0.78
Oval: length × width × average water depth × 0.89
8-shape: length × width × average water depth × 0.85
The product is suitable for all types of pools, easy to dose, and is dissolved in water before being distributed evenly across the pool. Due to its controlled action, it is ideal for both preventive maintenance and targeted correction.
Are you experiencing cloudy pool water, limescale deposits, or is your chlorine not working as well as it should? Then there is a good chance that your pH level is too high. With W’eau pH Minus powder, you can lower the pH level quickly, easily, and effectively, so that your pool water feels clear, fresh, and comfortable again.
A correct pH level (between 7.2 and 7.6) is essential for the optimal functioning of water treatment products. By regularly adjusting the levels with this powerful pH-minus powder, you prevent unnecessary chemical consumption and skin and eye irritation, while ensuring a pleasant swimming experience for the whole family.
The fine-grained powder form ensures that the product dissolves quickly when pre-mixed with water. This allows it to be evenly distributed throughout the pool, helping you achieve the desired result quickly. Thanks to the convenient 1.5 kg packaging, this product is ideal for above-ground pools and small to medium-sized swimming pools.
With W’eau pH Minus, you choose reliable water balance, clearer pool water, and greater swimming comfort all season long.
Interline pH-Minus 1 kg is a reliable and powerful powdered agent for lowering the pH value in swimming pools and spas. A correct pH value (between 7.2 and 7.6) is essential for the optimal effectiveness of chlorine and other water treatment products. pH-Minus helps to correct an overly high pH, which prevents problems such as cloudy water, irritation of the eyes/skin, and limescale deposits.
Swimming pool volume formulas:
Rectangular: length × width × avg. water depth (in meters)
Round: diameter² × avg. water depth × 0.78
Oval: length × width × avg. water depth × 0.89
8-shaped: length × width × avg. water depth × 0.85
In addition to pH correction, this product can also be used to lower the total alkalinity (TA) of the pool water, helping to keep the water balance more stable. Interline pH-Minus is suitable for all types of swimming pools and spas, for both private and professional use. The product is dissolved in water and then distributed evenly over the surface.
Are your swimming pool water levels not quite right? W’eau pH plus powder easily increases the pH level of your pool so you can go back to doing cannonballs without a care! This extra-large 5 kg package is suitable for even the largest above-ground or built-in pools, and its powder form means it dissolves almost instantly in the pool water.Instructions for use W’eau pH plus powderTo know how much pH minus or pH plus you need to add to your water, always measure the current pH level first. An ideal pH level is between 7.2 and 7.6. Mix the correct amount of pH powder in a bucket with warm or pool water. You can read exactly how much to add on the packaging. Spread it evenly over the pool and you're all set!Safety instructions W’eau pH plus powderNever use W’eau pH plus powder at the same time as other chemicals like chlorine, and always add the powder to the water, never the other way around. Always store the powder in a safe, dry, and cool place. Also, always read the safety instructions on the packaging before use!
A pH level that is too high in your pool water can cause cloudy water, reduced chlorine effectiveness, and skin or eye irritation. With Rijo Liquid pH Minus – 5 Liters, you can easily and gradually bring the pH level back into balance. Thanks to its liquid form, the product is easy to dose and ideal for larger swimming pools and regular maintenance. The generous 5-liter container ensures you have enough for a long time and contributes to efficient and clean water management.
Instructions for use:
Measure the pH level of the pool water (ideal: 7.2 – 7.6).
Add 30 ml of pH Minus to the water per measurement.
Let the water circulate for at least 30 minutes.
Measure again and repeat if necessary until the correct value is reached.
Safety regulations:
Never use simultaneously with other chemicals such as chlorine.
Always add the product to water, never the other way around.
Wear eye protection and protective clothing when using.
Keep out of reach of children.
Causes serious eye damage – always read the label before use.
Is your pool water pH level too low? Easily bring the water back into balance with Rijo Liquid pH Plus. This liquid pH increaser is specially developed for large above-ground and built-in pools. Thanks to its liquid form, the product is easy and precise to dose, and you can raise the pH level gradually and safely. This not only promotes the effectiveness of other water treatment products such as chlorine, but also prevents skin and eye irritation. The generous 5-liter packaging ensures you can last a long time with one purchase.
Instructions for use:
First measure the current pH level of the pool water (ideally between 7.2 – 7.6).
Add 30 ml Ri.jo Liquid pH Plus per measurement.
Wait 30 minutes and measure again.
Repeat until the correct pH level is reached.
Safety regulations:
Do not use simultaneously with other chemicals such as chlorine.
Always add to water, never the other way around.
Wear eye protection during use.
Keep out of reach of children.
May be corrosive to metals, causes severe skin burns and eye damage.
The Interline pH-minus 3 kg is a powerful, granular pH-regulator specifically developed to correct overly high pH levels in swimming pool and spa water. A correct pH level is crucial for the effective operation of chlorine and for preventing the formation of limescale and algae. This pH-minus lowers the pH in a controlled and safe manner, ensuring the pool water remains clear and hygienic.
These white granules dissolve easily in water and are suitable for both hard and soft water. The product is easy to dose and, when used correctly, ensures a stable and healthy pool environment. Ideal for private swimming pools and spas.
Instructions for use:
First, measure the pH level of the pool water. An ideal value is between 7.2 and 7.6.
Dissolve the product in a bucket of water and distribute it evenly over the water surface.
Dosage:
80 g per 10 m³ of water lowers the pH by approximately 0.1
Maximum 300 g per 10 m³ of water per treatment
A second treatment may only be carried out after 12 hours
During treatment: let the pump run for 3–4 hours
Can also be used to lower the total alkalinity (TA)
Safety precautions:
Protect eyes, skin, and clothing
Keep out of reach of children
Always add product to water, never the other way around
In summary:The Interline pH-minus 3 kg is a reliable solution for pool owners who want to keep their water in top condition. By ensuring the correct pH level, you not only extend the lifespan of your pool equipment but also increase swimming comfort.
Store in a cool, dry, and closed place
Is the pH level of your pool or spa too low? With Rijo Liquid pH Plus – 1 Liter, you can quickly and controllably increase the water's acidity. The liquid form makes it easy to dose and ensures a gradual correction of the pH level, which is important for swimmer comfort as well as the effectiveness of disinfectants such as chlorine. This convenient 1-liter packaging is ideal for smaller pools, spas, or occasional maintenance.
Instructions for use:
First, measure the current pH level of the pool water (ideally between 7.2 – 7.6).
Add 30 ml of Rijo Liquid pH Plus per measurement.
Wait 30 minutes and measure again.
Repeat until the correct pH level is reached.
Safety instructions:
Do not use simultaneously with other chemicals such as chlorine.
Always add to water, never the other way around.
Wear eye protection during use.
Keep out of reach of children.
May be corrosive to metals, causes severe skin burns and eye damage.
With the W’eau pH Minus powder 5 kg, you can easily and effectively lower the pH value of your swimming pool or spa water. A correct pH value is essential for good water balance and is ideally between 7.2 and 7.6. When the pH value is too high, it can cause cloudy water, limescale, and irritation to the skin and eyes. With this powerful powder, you can quickly bring the water back into optimal condition.
Thanks to its rapid solubility, the product is immediately absorbed into the water, ensuring a quick effect. This makes it ideal for both regular maintenance and correcting an unbalanced pH value. Moreover, a correct pH value ensures that other water treatment products, such as chlorine, work better and are used more efficiently.
The generous 5 kg package is perfectly suited for both small and large swimming pools and lasts a long time. This makes it an economical choice for anyone who wants to maintain their pool water professionally.
B-Care pH- / Sulfuric Acid 15% is a powerful solution used to lower the pH level of swimming pool and spa water. The container has a capacity of 20 liters and contains 15% sulfuric acid. This product is suitable for both private and commercial swimming pools and spas.Maintaining the correct pH level of your swimming pool or spa water is crucial for a healthy and comfortable swimming environment. A pH level that is too high can lead to reduced chlorine effectiveness, which may result in algae growth and cloudy water. B-Care pH- / Sulfuric Acid 15% ensures that the pH level is lowered quickly and effectively, allowing you to enjoy crystal-clear water again.The use of sulfuric acid must be done with the necessary caution. Therefore, always read the instructions on the packaging and use protective gloves and clothing. B-Care pH- / Sulfuric Acid 15% is supplied in a sturdy plastic container with a convenient dosing cap, so you can safely dose and add the correct amount of product to your swimming pool or spa water.With B-Care pH- / Sulfuric Acid 15%, you can be sure that your swimming pool or spa water always has the correct pH level for a comfortable and safe swimming experience. This product is a reliable choice for anyone who wants to keep their swimming pool or spa water in top condition.
Achieve and maintain the ideal pH balance in your pool water with the Rijo Liquid pH Set. This complete set contains both pH Minus and pH Plus, each in a generous 5-liter container. Perfect for larger pools and those who perform regular maintenance. The liquid form makes dosing easy and ensures quick and accurate adjustment of the pH value. This helps prevent problems such as cloudy water, reduced effectiveness of chlorine, or skin and eye irritation.
🧪 Instructions for use (for both products):
Measure the current pH value of the pool water (ideally between 7.2 and 7.6).
Add 30 ml of pH Plus or pH Minus per measurement, depending on the measured value.
Let the water circulate for at least 30 minutes.
Measure again and repeat if necessary.
⚠️ Safety instructions
Do not mix with other chemicals such as chlorine.
Always add the product to water, never the other way around.
Wear eye protection and protective clothing.
Keep out of reach of children.
Causes serious eye damage – always read the label before use.
Is the pH level of your pool water too high? Then Rijo Liquid pH Minus – 1 Liter is exactly what you need to bring the pH level back to the right level. The liquid form makes it easy and accurate to dose, so the pH level drops gradually without fluctuations. A correct pH level (between 7.2 and 7.6) is essential for the effectiveness of chlorine and prevents skin and eye irritation. This compact 1-liter pack is ideal for small to medium-sized pools or spas.
Instructions for use:
Measure the current pH level of the water (ideal: 7.2 – 7.6).
Add 30 ml of W'eau pH Minus.
Let the water circulate for 30 minutes.
Measure again and repeat if necessary.
Safety regulations:
Do not combine with other chemicals such as chlorine.
Always add the product to water, never the other way around.
Always wear eye protection.
Keep out of reach of children.
Causes serious eye damage – use with care.
Is the pH level of your pool water too low? Easily bring the water back into balance with W'eau Liquid pH Plus. This liquid pH increaser has been specially developed for large above-ground and built-in pools. Thanks to its liquid form, the product is easy and accurate to dose, allowing you to increase the pH level gradually and safely. This not only improves the effectiveness of other water treatment products such as chlorine, but also prevents skin and eye irritation. The generous 5-liter package ensures that you can last a long time with a single purchase.
Instructions for use:
First, measure the current pH level of the pool water (ideal range is 7.2 – 7.6).
Add 30 ml of W'eau Liquid pH Plus per measurement.
Wait 30 minutes and measure again.
Repeat until the correct pH level is reached.
Safety regulations:
Do not use simultaneously with other chemicals such as chlorine.
Always add to water, never the other way around.
Wear eye protection during use.
Keep out of reach of children.
May be corrosive to metals, causes severe skin burns and eye damage.
Is the pH level of your pool water too high? Then W’eau Liquid pH Minus – 1 Liter is exactly what you need to bring the pH level back to the right level. The liquid form makes it easy and precise to dose, allowing the pH level to gradually decrease without fluctuations. A correct pH level (between 7.2 and 7.6) is essential for the effectiveness of chlorine and prevents skin and eye irritation. This compact 1-liter pack is ideal for small to medium-sized swimming pools or spas.
Instructions for use:
Measure the current pH level of the water (ideal: 7.2 – 7.6).
Add 30 ml of W'eau pH Minus.
Allow the water to circulate for 30 minutes.
Measure again and repeat if necessary.
Safety regulations:
Do not combine with other chemicals such as chlorine.
Always add the product to water, never the other way around.
Always wear eye protection.
Keep out of reach of children.
Causes serious eye damage – use with care.
Is the pH level of your pool or spa too low? With W’eau Liquid pH Plus – 1 Litre, you can quickly and controllably increase the water's acidity. The liquid form makes it easy to dose and ensures a gradual correction of the pH level, which is important for swimmer comfort and the effectiveness of disinfectants such as chlorine. This convenient 1-litre package is ideal for smaller pools, spas, or occasional maintenance.
Instructions for use:
First, measure the current pH level of the pool water (ideally between 7.2 – 7.6).
Add 30 ml of W'eau Liquid pH Plus per measurement.
Wait 30 minutes and measure again.
Repeat until the correct pH level is reached.
Safety instructions:
Do not use simultaneously with other chemicals such as chlorine.
Always add to water, never the other way around.
Wear eye protection during use.
Keep out of reach of children.
May be corrosive to metals, causes severe skin burns and eye damage.
Do you have a smaller pool or perform maintenance only occasionally? With the Rijo Liquid pH Set – 2 x 1 Litre, you have a compact yet powerful solution for keeping your pool water perfectly balanced. This set contains both a pH decreaser (Minus) and a pH increaser (Plus), each in a convenient 1-litre bottle. Ideal for above-ground pools, spas, and users who want to dose precisely without waste. The liquid form makes accurate and safe application easy.
🧪 Instructions for use (for both products):
Measure the current pH value of the pool water (ideally between 7.2 and 7.6).
Add 30 ml of pH Plus or pH Minus per measurement, depending on the measured value.
Allow the water to circulate for at least 30 minutes.
Measure again and repeat if necessary.
⚠️ Safety instructions
Do not mix with other chemicals such as chlorine.
Always add the product to water, never the other way around.
Wear eye protection and protective clothing.
Keep out of reach of children.
Causes serious eye damage – always read the label before use.
A pH level that is too high in your pool water can cause cloudy water, reduced effectiveness of chlorine, and skin or eye irritation. With W’eau Liquid pH Minus – 5 Liters, you can easily and gradually bring the pH level back into balance. Thanks to its liquid form, the product is easy to dose and ideal for larger swimming pools and regular maintenance. The generous 5-liter container ensures you have enough for a long time and contributes to efficient and clean water management.
Instructions for use:
Measure the pH level of the pool water (ideal: 7.2 – 7.6).
Add 30 ml of pH Minus to the water per measurement.
Allow the water to circulate for at least 30 minutes.
Measure again and repeat if necessary until the correct level is reached.
Safety regulations:
Never use simultaneously with other chemicals such as chlorine.
Always add the product to water, never the other way around.
Wear eye protection and protective clothing when using.
Keep out of reach of children.
Causes serious eye damage – always read the label before use.
With the Kokido buffer solution, you ensure that your digital pH meter always provides accurate readings. This set contains two bottles of buffer solution with different pH values: pH 7 and pH 4. This allows you to regularly calibrate the pH meter, ensuring reliable measurements of the pH level in your pool or spa. This is essential for maintaining clean, healthy water and ensures that you can confidently maintain the correct chemical balance.
The Kokido buffer solution is used to perform a zero calibration or to calibrate the sensor of the pH meter. We recommend checking the meter regularly and recalibrating it 2-3 times per season for optimal performance. This ensures that the readings are always correct and helps you prevent problems with the water quality in your pool.
With the Kokido buffer solution, you keep your pH meter in top condition and ensure a well-maintained pool or spa, where the water balance is always optimal.
