Take advantage of the sales now

Sand filter sets


  • W'eau FPP-400 sand filter set 6m3 W'eau FPP-400 sand filter set 6m3

    W'eau W'eau FPP-400 sand filter set 6m3

    1-2 business days delivery time

    The W'eau FPP-400 sand filter set is a powerful solution for filtering both above ground and structural pools. This set is designed for pools with a capacity of up to 24,000 litres and is suitable for pools with low, medium and high resistances. This makes the FPP-400 ideal for larger installations where the pipework can be longer and the filter set can be connected to a pool vacuum cleaner. The design flow rate of 6 m³/h means that the filter set can filter up to 6,000 litres of water per hour, ensuring clean and clear pool water. The sand filter is equipped with a Top Mount 6-way valve , which provides user-friendly operation with multiple settings for various cleaning and maintenance tasks. With this valve you can easily switch between filtering, backwashing, rinsing and water circulation, so that the pool water always remains in optimal condition. The filter set includes a self-priming pump that is specially designed for heavier tasks. This pump is not only powerful, but also energy-efficient, which contributes to lower energy costs. The filter vessel is made of polyethylene reinforced with polyester, which makes it resistant to a working pressure of 2.5 bar , and ensures durability and a long service life. Functions of the 6-way valve: Filtering : Water flows from top to bottom through the filter tank, filtering dirt and impurities from the pool water. Backwashing : Water flows from bottom to top to rinse the filter material and remove accumulated dirt. Rinse : Rinses away dirt after backwashing, leaving the filter clean for use again. Close : Close all inputs and outputs when the pump is not in use. Waste : Discharges water directly into the sewer, for example to lower the water level. Circulate : Allows the water to circulate without filtering, ideal when treating water with chemicals such as algae control. Filter medium: The W'eau FPP-400 filter tank can be filled with either filter sand or filter glass . Filter sand is a popular and cost-effective choice, but filter glass provides better filtration and lasts longer. It is recommended to use 33 kg of filter sand or 28.1 kg of filter glass , depending on your preference. Filter glass is more durable, effective and needs to be replaced less often (up to 15 years), while filter sand needs to be replaced after about 5 years. Scope of delivery: Sand filter tank Swimming pool pump with RCD plug (leakage current protection) Base plate 6-way valve Coupling hose Connection material (50 mm) Manual Warranty: Swimming pool pump warranty : 2 years Filter tank warranty : 5 years Faucet warranty : 1 year

    1-2 business days delivery time

    €389,00

  • Intex SX2800 sand filter pump - 8 m³/h Intex SX2800 sand filter pump - 8 m³/h

    Intex Intex SX2800 sand filter pump - 8 m³/h

    1-2 business days delivery time

    The Krystal Clear sand filter installation from Intex is useful for purifying the swimming pool water. This powerful installation works with filter sand, which ensures effective filtering. Practical sand filter installation The system has a capacity of 8 m³ per hour. This makes the pump suitable for the large Intex Ultra Frame Rectangular models (975 x 488 cm). In addition to filter sand, the Krystal Clear installation can also be used with filter glass. The contents last for several seasons and require little maintenance. To make the sand filter installation function, you need 35 kilograms of filter sand, 25 kilograms of filter glass or 980 grams of fiber clean. However, the filter pump is supplied excluding these filter media. The pump is easy to clean, has six functions and a handy timer.

    1-2 business days delivery time

    €279,00

  • W'eau FPP-450 sand filter set 8m3 W'eau FPP-450 sand filter set 8m3

    W'eau W'eau FPP-450 sand filter set 8m3

    1-2 business days delivery time

    The W'eau FPP-450 sand filter set is a complete and powerful solution for filtering both above ground and structural pools with a capacity of up to 36,000 litres . This set offers a design flow rate of 8 m³ per hour , which means it can filter 8,000 litres of water per hour, making it suitable for larger pools. The set is designed for low, medium and high resistances, which means that the pipework can be long and the filter set can be connected to a pool vacuum for thorough cleaning. The filtering is done via a Top Mount sand filter that is controlled by a 6-way valve , which allows you to perform various functions for optimal maintenance of your pool water. The powerful self-priming pump is not only suitable for heavier jobs, but is also energy-efficient, so that the use of the pump does not consume unnecessary energy. The filter tank is made of polyethylene reinforced with polyester , which makes it resistant to a maximum working pressure of 2.5 bar , making it durable and strong enough for intensive use. The W'eau FPP-450 is supplied as a complete set including a sand filter tank , pool pump , base plate , 6-way valve , coupling hose and the necessary connection material . The filter medium (sand or glass) is not included and can be purchased separately. Connecting the pool pump is easy thanks to the supplied base plate, and thanks to the RCD plug (leakage current protection), the installation is safe and reliable. Functions of the 6-way valve: Filtering : Water flows through the filter from top to bottom, which removes dirt and impurities from the pool water. Backwashing : Water flows in the reverse direction (from bottom to top) to rinse the filter material and remove any accumulated dirt. Rinse : Rinses away dirty water after backwashing to clean the filter for next use. Close : Close all inputs and outputs of the filter when not in use. Waste : Drains pool water directly into the sewer, useful when you want to lower the water level. Circulate : Allows the water to circulate without passing it through the filter, ideal for situations where you are carrying out chemical treatments such as algae control. Filter medium: The W'eau FPP-450 sand filter set can be filled with filter sand or filter glass . Filter sand is the most common and affordable option and only needs to be replaced every 5 years. Filter glass is more durable, effective and lasts up to 10-15 years, while you need less of it. Depending on your preference, you can choose one of these options, both of which result in clean and clear pool water. Required amount of filter sand : 45 kg Required amount of filter glass : 38.3 kg Required amount of glass beads : 33.8 kg Scope of delivery: Sand filter tank Swimming pool pump with RCD plug (leakage current protection) Base plate 6-way valve Coupling hose Connection material (50 mm) Manual Warranty: Swimming pool pump warranty : 2 years Filter tank warranty : 5 years Faucet warranty : 1 year

    1-2 business days delivery time

    €439,00

  • Intex Krystel Clear sand filter pump 12m3 Intex Krystel Clear sand filter pump 12m3

    Intex Intex Krystel Clear sand filter pump 12m3

    1-2 business days delivery time

    Do you have an Intex swimming pool and do you want to provide it with the most efficient filtration technology? Then, depending on the size and resistance of your pool, this is the set you need. This sand filter pump pumps up to 10,000 liters of water per hour. This makes the Intex sand filter pump suitable for swimming pools with a water capacity of up to 40,000 liters. Do you have more resistance, such as a saltwater system and/or heat pump? Then maintain a maximum water capacity of 30,000 liters. Effective operation with filter medium The sand filter pump keeps your pool water moving, giving virtually no chance for algae, bacteria and fungi to develop. Your pool water will be completely pumped around in about 4 hours. The pump pumps the pool water through a filter vessel, which must be filled with sand or glass. These filter media are much more effective than filter cartridges; fine particles are better captured. This keeps your swimming water fresher, cleaner and clearer.

    1-2 business days delivery time

    €319,99

  • Intex Krystel Clear sand filter pump 3.5m3

    Intex Intex Krystel Clear sand filter pump 3.5m3

    1-2 business days delivery time

    The Intex Krystal Clear Sand Filter Pump 3.5m³ (SX925) is specially designed to make the maintenance of smaller above ground pools easy and efficient. Thanks to the powerful filtration capacity and the durable filter system, this sand filter ensures crystal clear pool water with minimal maintenance . With a 4-way valve and an electronic control panel with timer , this sand filter pump is easy to set and operate. Unlike traditional cartridge filter pumps, where you have to regularly clean and replace the filter cartridges, the filter sand in this pump only needs to be replaced every 5 years (with glass filters even after 8 years ). Thanks to the standard 32mm hose connection , you can easily connect the pump to all Intex pools up to 17m³ without additional adapters. The pump is powerful, energy-efficient and safe, and comes with a 12V transformer in accordance with Belgian legislation .

    1-2 business days delivery time

    €139,95

  • Sand filter set DK 560 - 12 m³/h Sand filter set DK 560 - 12 m³/h

    DK Sand filter set DK 560 - 12 m³/h

    1-2 business days delivery time

    The Sand Filter Set DK 560 is an affordable and reliable choice for filtration of medium-sized above-ground and built-in pools. This complete set is designed for pools with a capacity of up to 48,000 litres and offers excellent filtration thanks to the powerful pump with a capacity of 15,000 litres per hour . The system can handle medium to heavy resistance without any problems, such as longer distances of 5 to 10 metres or connecting a pool vacuum cleaner. Medium Application for Optimal Water Quality This filter set is ideal for medium-sized pools that require regular filtration. Whether you have an above-ground pool or an in-ground pool, the DK 560 ensures clear and clean pool water. The system can easily handle medium resistances and is also capable of operating a pool vacuum, which provides extra versatility and functionality. Complete Filter Set for Direct Use (excluding filter medium) The DK 560 filter set comes with all the necessary components to get started right away: a sand filter tank, pool pump, 6-way tap , 50 mm connection, and a plug with earth leakage circuit. The only thing you need is the filter medium, such as sand, glass or Aqualoon, to make the system operational. Handy 6-way tap for different filtration modes The 6-way valve allows you to easily switch between different modes, giving you full control over the filtration process. The main features are: Filtering : The water flows from top to bottom through the filter material for standard filtration. Backwashing : Water flows in the reverse direction to rinse the filter material. Rinse : Rinse away the dirty water after backwashing. Close : Close all inputs and outputs. Waste : Directs pool water directly to the sewer, useful for lowering the water level. Circulate : Allows the water to circulate without passing through the filter, essential when treating with chlorine shock. Choose from Multiple Filter Media The DK 560 can be filled with filter sand, filter glass or Aqualoon , depending on your preference and the specific requirements of your pool. Each medium has its own advantages: Filter sand : The most traditional, cheap and must be replaced every 5 years. You need 50 kg. Filter glass : More effective than sand, less required (43 kg) and only needs to be replaced after 10-15 years. Aqualoon : Lightweight and environmentally friendly, can be washed and cleaned. Requires 1400 grams. With the DK 560 Sand Filter Set you get an efficient and powerful filtration solution for medium-sized pools. Thanks to the versatility of the 6-way valve and the choice of various filter media, you have complete control over the water quality in your pool.

    1-2 business days delivery time

    €399,00

  • Last stock! W'eau FPP-500 sand filter set 12m3 W'eau FPP-500 sand filter set 12m3

    W'eau W'eau FPP-500 sand filter set 12m3

    1-2 business days delivery time

    The W'eau FPP-500 sand filter set is a powerful and complete solution for filtering both above ground and structural pools. With a design flow rate of 12 m³ per hour, this sand filter set is capable of filtering up to 12,000 litres of water per hour, making it ideal for larger pools up to 48,000 litres . Thanks to its suitability for low, medium and high resistances, this set can be used in pools with long pipework and can be connected to a pool vacuum for thorough cleaning. The set comes with a powerful, self-priming pump that is specially designed for heavier tasks. Despite its powerful performance, the pump is energy efficient, which helps to keep energy costs low. The filter vessel is made of polyethylene (PE), reinforced with polyester, and can withstand a maximum working pressure of 2.5 bar , ensuring durability and long-term reliability. This Top Mount sand filter set is equipped with a 6-way valve that offers different positions for various filtering and maintenance tasks. You can easily switch between filtering, backwashing, rinsing, circulating, and more. This makes the W'eau FPP-500 sand filter set particularly versatile and efficient in use. Functions of the 6-way valve: Filtering : Water flows through the filter from top to bottom, which removes dirt and impurities from the pool water. Backwashing : Water flows from bottom to top to rinse the filter material and remove accumulated dirt. Rinse : Rinses away dirty water after backwashing, leaving the filter ready for use. Close : Close all inputs and outputs when the pump is not in use. Waste : Drains pool water directly into the sewer, for example to lower the water level. Circulate : Allows the water to circulate without passing through the filter, ideal for chemical treatments such as algae control. Filter medium: The filter tank of the W'eau FPP-500 can be filled with both filter sand and filter glass . Filter sand is the most common and cost-effective option, which needs to be replaced approximately every 5 years. Filter glass is more durable and effective, and only needs to be replaced every 10 to 15 years. Depending on your choice, you will need 85 kg of filter sand or 72.3 kg of filter glass for optimal results. Scope of delivery: Sand filter tank Swimming pool pump with RCD plug (leakage current protection) Base plate 6-way valve Coupling hose Connection material (50 mm) Manual Warranty: Swimming pool pump warranty : 2 years Filter tank warranty : 5 years Faucet warranty : 1 year

    1-2 business days delivery time

    €489,00

  • W'eau FPP-350 sand filter set 4m3 W'eau FPP-350 sand filter set 4m3

    W'eau W'eau FPP-350 sand filter set 4m3

    1-2 business days delivery time

    The W'eau FPP-350 sand filter set is designed for efficient cleaning and filtering of both above ground and structural pools with a capacity of up to 16,000 litres . This powerful filter set, with a design flow rate of 4 m³/h , is suitable for low to medium resistances, which means that the pipework can be up to 10 metres and that you can connect the filter set to a pool vacuum cleaner. The filter set is supplied as a complete set including a pool pump, 6-way valve, base plate, coupling hose and connection material. The Top Mount sand filter with a 6-way valve makes it easy to operate and maintain the filter. The six different settings on the valve provide maximum flexibility when filtering, rinsing, and cleaning your pool water. The powerful, self-priming pump in this set is designed for heavier tasks, such as processing dirty pool water, and is also energy efficient. The filter vessel of the W'eau FPP-350 is made of polyethylene reinforced with polyester, which makes it resistant to a working pressure of up to 2.5 bar . This makes the filter set extremely durable and suitable for intensive use. The filter vessel can be filled with filter sand or filter glass (not included), depending on your preference for the type of filter medium. Functions of the 6-way valve: Filtering : Water flows from top to bottom in the filter tank to filter dirt and impurities from the pool. Backwashing : Water flows from bottom to top to rinse the filter material and remove any accumulated dirt. Rinse : Rinse away dirty water after backwashing to keep the filter material clean. Close : Close all inputs and outputs when the pump is not in use. Waste : Drains pool water directly to the sewer, for example when the water level needs to be lowered. Circulate : Allows the water to circulate without filtering it, which is useful in water treatment, such as controlling algae. Filter medium: The W'eau FPP-350 filter tank can be filled with filter sand or filter glass , depending on your preference. Filter sand is a cost-effective option and only needs to be replaced after 5 years. Filter glass , on the other hand, is more durable, lasting up to 15 years, and has a higher filtration efficiency, so you need less of it. Required amount of filter sand : 18 kg Required amount of filter glass : 15.3 kg Required glass beads : 13.5 kg Warranty: Swimming pool pump warranty : 2 years Filter tank warranty : 5 years Faucet warranty : 1 year Scope of delivery: Sand filter tank Swimming pool pump with RCD plug (leakage current protection) Base plate 6-way valve Coupling hose Connection material (50 mm) Manual

    1-2 business days delivery time

    €339,00

  • Sand filter set DK 400 - 6 m³/h Sand filter set DK 400 - 6 m³/h

    DK Sand filter set DK 400 - 6 m³/h

    Sold out

    This simple but powerful sand filter set is perfectly suited for medium-sized above-ground and built-in pools. We recommend this filter set for above-ground pools with a maximum capacity of 24,000 litres. The filter set is equipped with a polyethylene sand filter in combination with a simple self-priming pool pump. The 6-way tap allows you to easily operate the different settings of the filter. Medium duty application This filter set is equipped with a swimming pool pump with a maximum pump capacity of 8,500 litres per hour. This makes the filter set ideal for medium-sized above-ground and built-in swimming pools. The filter set is suitable for swimming pools with a medium-heavy application. This means that the pump has sufficient capacity to bridge distances of 5 to 10 metres to the swimming pool and a vacuum cleaner can be connected to the pump without any problems. Complete filter set (excluding filter medium) This DK 400 filter set is complete with all accessories, so you can install the sand filter set immediately. The filter set is supplied with sand filter tank, pool pump, 6-way tap, 32 and 38 mm connection and a plug with earth leakage circuit. To use the filter set, you only need the correct amount of filter medium. 6 way tap The DK 400 filter set is equipped with a handy 6-way tap. This allows you to easily operate the different settings on the filter. Below we list the settings for you and briefly explain their use. Filtering; water flows from top to bottom in the filter tank (used 99% of the time) Backwashing; water flows from bottom to top in the filter vessel to rinse the filter material (use this setting when you notice reduced filtration/flow) Rinse; flush away dirty water after backwashing Close; you close all entrances and exits Waste; drain pool water directly to the sewer (when you want to lower the water level) Circulate; allow water to flow around only, without passing through the filter (almost essential when treating with chlorine shock, for example with green pool water) Filter medium; sand, glass or Aqualoon The filter tank of the DK 400 is filled with filter sand, filter glass or Aqualoon. This is not included as standard. Filter sand is traditionally used the most, is the cheapest and must be replaced after about 5 years. Filter glass is somewhat more effective, slightly more expensive, but less of it is needed and you only have to replace it after 10 to 15 years. The Aqualoon filter balls are the lightest filter medium and can be washed after use. The balls must be cleaned at least once per season. Required amount of filter sand: 25 kg Required amount of filter glass: 22 kg Required amount of aqualoon: 700 grams

    Sold out

    €299,00

  • W'eau VPP-450 variable sand filter set - 8 m³/h W'eau VPP-450 variable sand filter set - 8 m³/h

    W'eau W'eau VPP-450 variable sand filter set - 8 m³/h

    1-2 business days delivery time

    The W'eau VPP-450 variable sand filter set is an innovative solution for pool maintenance. This filter set is equipped with a variable pool pump , which means that you can easily adjust the speed of the pump to the needs of your pool. This ensures that the pump only runs at full power when it is needed, which saves energy and ensures lower costs. With a maximum capacity of 8 m³ per hour, the VPP-450 is perfect for pools up to 36,000 liters , effectively removing all dirt particles for clean and clear water. The 6-way valve makes it easy to switch between different functions, such as filtering, backwashing and rinsing. The filter vessel is made of sturdy polyethylene (PE) reinforced with polyester , making it resistant to high pressure and intensive use. This sand filter set comes with a self-priming pump , which means that the pump automatically draws in water for optimum operation. The VPP-450 is ideal for both above-ground and in-ground pools and is supplied Plug & Play , complete with plug and coupling for easy installation. Save costs with variable pump The W'eau VPP-450 uses a variable speed pool pump , which allows you to adjust the speed of the pump yourself. This ensures that the pump only works at full power when it is really needed, which saves energy and reduces operating costs. The pump uses less power and provides efficient filtration of the pool water. Functions of the 6-way valve: Filtering : Water flows from top to bottom through the sand bed, removing dirt and impurities. Backwashing : Clean the sand bed by reversing the water flow and removing accumulated dirt. Rinse : Rinse away dirty water after backwashing so the filter is ready for use. Close : Close all inputs and outputs when the filter is not in use. Waste : Drains pool water directly into the sewer, for example to lower the water level. Circulate : Allows water to circulate without passing through the filter, ideal for chemical treatments such as algae control. Summary: The W'eau VPP-450 variable sand filter set offers a smart and energy-efficient solution for the maintenance of your pool. With its variable pump, large capacity and convenient 6-way valve, this set ensures efficient cleaning of pools up to 36,000 litres. This set is easy to install and ideal for intensive use in both above-ground and built-in pools.

    1-2 business days delivery time

    €849,00

  • W'eau VPP-400 variable sand filter set - 6 m³/h W'eau VPP-400 variable sand filter set - 6 m³/h

    W'eau W'eau VPP-400 variable sand filter set - 6 m³/h

    1-2 business days delivery time

    The W'eau VPP-400 variable sand filter set is an innovative breakthrough in pool maintenance. This sand filter set is equipped with a variable pool pump , allowing you to easily adjust the speed of the pump to the needs of your pool. This not only makes the filter set energy efficient, but it also ensures that you can optimize the performance of the pump when necessary. With a flow capacity of 6 m³ per hour , this sand filter set is ideal for pools up to 24,000 liters , where it effectively removes all impurities for clean and clear water. The set features a 6-way valve , allowing you to easily switch between different functions for filtering, backwashing and maintaining your pool water. The filter tank is made of high-quality polyethylene (PE) reinforced with polyester , making it resistant to high pressure and long-term use. In addition, the W'eau VPP-400 is fully self-priming, meaning that the pump automatically draws in water for optimal operation. Energy efficient due to variable pump The W'eau VPP-400 distinguishes itself by the energy-efficient variable pump, which only runs at full power when necessary. This prevents unnecessary energy consumption and significantly reduces your energy costs. The set is supplied Plug & Play , complete with plug and coupling, making it easy to install and quickly ready for use. Functions of the 6-way valve: Filtering : Water flows through the sand bed to remove dirt and impurities. Backwashing : Clean the sand bed by reversing the water flow. Rinse : Rinse away dirt after backwashing for a fresh start. Close : Close all inputs and outputs when the filter is not in use. Waste : Drains pool water directly into the sewer. Circulate : Allows water to circulate without passing through the filter, for example during chemical treatments. Summary: The W'eau VPP-400 variable sand filter set is a sustainable and energy-efficient solution for pool maintenance. Thanks to the variable pump and the versatile 6-way valve, you can easily keep the pool water clean with minimal energy costs. The set is designed for pools up to 24,000 liters and offers an excellent filtration experience with high ease of use.

    1-2 business days delivery time

    €799,00

  • Sand filter set DK 310 - 4 m³/h Sand filter set DK 310 - 4 m³/h

    DK Sand filter set DK 310 - 4 m³/h

    1-2 business days delivery time

    The DK 310 sand filter set is a simple and affordable sand filter set for small above-ground pools. We recommend this filter set for above-ground pools with a maximum capacity of 16,000 litres. The filter set is equipped with a polyethylene sand filter in combination with a simple pool pump. The 6-way tap allows you to easily operate the different settings of the filter. Light application This filter set is equipped with a swimming pool pump with a maximum pump capacity of 7,000 litres per hour. This makes the filter set ideal for smaller above-ground and built-in swimming pools with little resistance from other equipment or long pipes. Please note that the swimming pool pump with its light application is not powerful enough to bridge long distances or to vacuum the pool intensively. Complete filter set (excluding filter medium) This DK 310 filter set is complete with all accessories, so that you can connect the sand filter set directly to your pool. The filter set is supplied with sand filter tank, pool pump, 6-way tap, 32 and 38 mm connection and a plug with earth leakage circuit. To use the filter set, you only need the correct amount of filter medium. 6 way tap The DK 310 filter set is equipped with a handy 6-way tap. This allows you to easily operate the different positions. Below we list the positions for you and briefly explain their use. Filtering; water flows from top to bottom in the filter tank (used 99% of the time) Backwashing; water flows from bottom to top in the filter vessel to rinse the filter material (use this setting when you notice reduced filtration/flow) Rinse; flush away dirty water after backwashing Close; you close all entrances and exits Waste; drain pool water directly to the sewer (when you want to lower the water level) Circulate; allow water to flow around only, without passing through the filter (almost essential when treating with chlorine shock, for example with green pool water) Filter medium; sand, glass or Aqualoon The filter tank of the DK 310 is filled with filter sand, filter glass or Aqualoon. This is not included as standard. Filter sand is traditionally used the most, is the cheapest and must be replaced after about 5 years. Filter glass is somewhat more effective, slightly more expensive, but less of it is needed and you only have to replace it after 10 to 15 years. The Aqualoon filter balls are the lightest filter medium and can be washed after use. The balls must be cleaned at least once per season. Required amount of filter sand: 16 kg Required amount of filter glass: 15 kg Required amount of Aqualoon: 450 grams

    1-2 business days delivery time

    €199,00

  • W'eau VPP-500 variable sand filter set - 12 m³/h W'eau VPP-500 variable sand filter set - 12 m³/h

    W'eau W'eau VPP-500 variable sand filter set - 12 m³/h

    1-2 business days delivery time

    The W'eau VPP-500 variable sand filter set is an advanced pool maintenance solution, designed to be both efficient and energy-saving. This filter set is equipped with a variable pool pump , which allows you to easily adjust the speed of the pump to the needs of your pool. This means that the pump only performs optimally when it is needed, which significantly reduces energy consumption and costs. The VPP-500 offers a maximum capacity of 12 m³ per hour , making it ideal for pools up to 48,000 litres . This powerful system effortlessly removes dirt particles from the water, ensuring a fresh and clean pool. The sand filter set is equipped with a 6-way valve , which allows you to switch between different functions, such as filtering, backwashing and rinsing. The filter vessel is made of sturdy polyethylene (PE) reinforced with polyester , which makes it resistant to high pressure and heavy conditions. The VPP-500 is completely self-priming, making it suitable for heavier applications and effortless to use thanks to the Plug & Play design. Cost savings thanks to variable swimming pool pump The W'eau VPP-500 distinguishes itself by the variable pool pump, which allows you to optimize energy consumption. By adjusting the pump to the required capacity, unnecessary energy consumption is avoided and you save considerably on energy costs. Functions of the 6-way valve: Filtering : Water flows from top to bottom through the sand bed, removing dirt and impurities. Backwashing : The sand bed is backwashed to remove accumulated dirt. Rinse : Rinses away dirty water after backwashing to prepare the filter for reuse. Close : Close all inputs and outputs of the filter when not in use. Waste : Drains pool water directly into the sewer. Circulate : Allows water to circulate without passing through the filter, ideal for chemical treatments such as algae control. Summary: The W'eau VPP-500 variable sand filter set offers an advanced and energy-saving solution for pools up to 48,000 litres. With its variable pump, large capacity and efficient filtration through the 6-way valve, this set is ideal for intensive use in both above-ground and built-in pools. Thanks to the Plug & Play design, installation is easy, so you can quickly enjoy clean and clear pool water.

    1-2 business days delivery time

    €899,00

  • Technical room with pre-assembled filter system Technical room with pre-assembled filter system

    Astral Pool Technical room with pre-assembled filter system

    1-2 business days delivery time

    The Ramses UP Technical Room with Pre-Assembled Filter System is a user-friendly and complete solution for installing your outdoor pool filter system. This technical room is equipped with a robust plastic injected roof , which is specially designed to withstand various weather conditions, keeping your equipment safe and well protected. The roof is equipped with a reinforced edge , a safety lock , and a hydraulic spring , which ensures easy use and extra protection against unwanted access. The room is delivered completely pre-assembled and is equipped with an Aster sand filter with a diameter of 550 mm and a powerful Sena 1 HP pump . This combination ensures efficient water filtration, keeping your pool water clean and clear without much effort. Thanks to the pre-assembled configuration, the installation of the system is quick and easy, allowing you to get started right away without complicated assembly processes. The Ramses UP Technical Room with Pre-Assembled Filter System offers a complete and convenient solution for pool owners looking for an efficient and space-saving way to install their outdoor pool filtration system. With its robust design, powerful filtration capacity, and pre-assembled configuration, this room is ideal for safely and neatly storing your pool equipment, while providing easy maintenance and access.

    1-2 business days delivery time

    €2.799,00

  • RAMSES II Technical room to be dug in, including sand filter set RAMSES II Technical room to be dug in, including sand filter set

    Astral Pool RAMSES II Technical room to be dug in, including sand filter set

    1-2 business days delivery time

    The RAMSES II In te Dig Technical Room offers a complete and efficient solution for storing and protecting your pool equipment. Made of glass fibre reinforced polymer , this technical room is resistant to various weather conditions and offers long-term protection when buried. The system is fully equipped for pools up to 60 m³ , and ensures that all technical equipment is stored safely and neatly, out of sight and protected from external influences. This technical room is equipped with a laminated Aster sand filter (Ø 550 mm) and a powerful Sena 1 HP filtration pump , which together ensure efficient and thorough water filtration. The collector is equipped with 3 double-coupled ball valves , which make the installation of the system easy and allow you to manage the installation quickly. The electrical cabinet is not included and must be purchased separately to complete the system. The RAMSES II In-ground Technical Room including Sand Filter Set offers an efficient, durable and space-saving solution for storing your pool equipment. Thanks to its robust design, powerful filtration capacity and convenient installation options, this technical room is ideal for pools up to 60 m³. It protects your equipment and ensures that your pool is always clean and clear, while the technical installation remains neatly out of sight.

    1-2 business days delivery time

    €2.199,00

  • RAMSES I Technical room to be dug in, including sand filter set RAMSES I Technical room to be dug in, including sand filter set

    Astral Pool RAMSES I Technical room to be dug in, including sand filter set

    1-2 business days delivery time

    The RAMSES I In-ground Technical Room is the ultimate solution for pool owners looking to store their technical equipment safely and neatly. This technical room is made from durable glass fibre reinforced polymer , ensuring sturdy and long-lasting protection for your pool equipment, even when it is in-ground. Fully equipped to support pools up to 60m³ in capacity, the room offers a convenient, out-of-sight solution for all your filtration needs. The RAMSES I room is supplied with a high-quality Millenium sand filter (Ø 560 mm) and a powerful Sena 1 HP filtration pump , which ensure efficient water filtration and the maintenance of clean and clear pool water. The PVC connections (Ø 50 mm) and the collector, equipped with 3 double-coupled ball valves , ensure easy installation and ease of use. Please note that the system does not include an electrical box, which must be purchased separately. The RAMSES I In te Graven Technical Room including Sand Filter Set is a complete and sustainable solution for pool owners who want to place their filtration system out of sight while ensuring efficient and reliable water filtration. With the powerful sand filter, filtration pump and convenient connections, this room offers everything you need for a clean and clear pool, while it is neatly and protected.

    1-2 business days delivery time

    €1.899,00

  • Poolex Filter Max Filter balls - Ø250mm, 6.8 m³/h Poolex Filter Max Filter balls - Ø250mm, 6.8 m³/h

    Poolex Poolex Filter Max Filter balls - Ø250mm, 6.8 m³/h

    1-2 business days delivery time

    The Poolex Filter Max Filtration Unit offers an innovative and efficient solution for filtration of swimming pools up to 40 m³. This filter unit is an advanced replacement for traditional sand filter systems, eliminating the disadvantages of sand filters while retaining all the advantages. Thanks to the filter balls, you never have to backwash and maintenance is simple and quick. With the Filter Max, you can enjoy the same filter quality as a cartridge filter, but with less effort and a longer lifespan. The unit is also ecological and energy-saving, making it an ideal choice for environmentally conscious pool owners. The integrated circulation pump has a power of 80W, which ensures quiet and efficient operation. The pre-filter basket catches larger particles before they reach the filter balls, which extends the life of the filter balls. Thanks to its compact size and light weight, the Poolex Filter Max is easy to install and move. In short, it is an excellent choice for anyone who wants to keep their pool clean without the hassle of traditional sand filters. With the Poolex Filter Max Filtration Unit you can easily keep your pool clean, without the disadvantages of traditional filter systems. Thanks to the innovative filter balls, maintenance is easier, more efficient and more ecological, resulting in a clearer and cleaner pool.

    1-2 business days delivery time

    €289,00

  • Poolex Filter Max Filter balls - Ø250mm, 4.8 m³/h Poolex Filter Max Filter balls - Ø250mm, 4.8 m³/h

    Poolex Poolex Filter Max Filter balls - Ø250mm, 4.8 m³/h

    1-2 business days delivery time

    The Poolex Filter Max Filtration Unit offers an innovative and efficient solution for filtration of swimming pools up to 40 m³. This filter unit is an advanced replacement for traditional sand filter systems, eliminating the disadvantages of sand filters while retaining all the advantages. Thanks to the filter balls, you never have to backwash and maintenance is simple and quick. With the Filter Max, you can enjoy the same filter quality as a cartridge filter, but with less effort and a longer lifespan. The unit is also ecological and energy-saving, making it an ideal choice for environmentally conscious pool owners. The integrated circulation pump has a power of 80W, which ensures quiet and efficient operation. The pre-filter basket catches larger particles before they reach the filter balls, which extends the life of the filter balls. Thanks to its compact size and light weight, the Poolex Filter Max is easy to install and move. In short, it is an excellent choice for anyone who wants to keep their pool clean without the hassle of traditional sand filters. With the Poolex Filter Max Filtration Unit you can easily keep your pool clean, without the disadvantages of traditional filter systems. Thanks to the innovative filter balls, maintenance is easier, more efficient and more ecological, resulting in a clearer and cleaner pool.

    1-2 business days delivery time

    €239,00

  • Onda Filter set 6 m³/h Onda Filter set 6 m³/h

    Onda Onda Filter set 6 m³/h

    1-2 business days delivery time

    Brand Onda Guarantee 2 year tank warranty Weight 20.7 kg Length 800 mm Height 625 mm Filter capacity at 50m³/h/m² (backwash capacity) 6.12 m³/h Filter capacity at 30m³/h/m² 3.67 m³/h Filter diameter 400mm / 16" Filter surface 0.12 m² Flow rate at 50 m/h 6.12 m³/h Sand 35 kg Engine power 0.33 kW Workload 2.5 Connection IN 1 1/2" Connection OUT 1 1/2"

    1-2 business days delivery time

    €495,00

  • Onda Filter set 10 m³/h Onda Filter set 10 m³/h

    Onda Onda Filter set 10 m³/h

    1-2 business days delivery time

    Brand Onda Guarantee 2 year tank warranty Weight 29.7 kg Length 810 mm Width 570 mm Height 724 mm Filter capacity at 50m³/h/m² (backwash capacity) 10.8 m³/h Filter capacity at 30m³/h/m² 6.48 m³/h Filter diameter 527mm / 21" Filter surface 0.21 m² Flow rate at 50 m/h 10.8 m³/h Sand 85 kg Engine power 0.5 kW Workload 2.5 Connection IN 1 1/2" Connection OUT 1 1/2"

    1-2 business days delivery time

    €595,00

  • Onda Filter set 15 m³/h Onda Filter set 15 m³/h

    Onda Onda Filter set 15 m³/h

    1-2 business days delivery time

    Brand Onda Guarantee 2 year tank warranty Weight 30 kg Length 890 mm Height 832 mm Filter capacity at 50m³/h/m² (backwash capacity) 13.9 m³/h Filter capacity at 30m³/h/m² 8.34 m³/h Filter diameter 627mm / 25" Filter surface 0.3 m² Flow rate at 50 m/h 13.9 m³/h Sand 145 kg Engine power 1 kW Workload 2.5 Connection IN 1 1/2" Connection OUT 1 1/2"

    1-2 business days delivery time

    €695,00

  • Onda Filter set 4 m³/h Onda Filter set 4 m³/h

    Onda Onda Filter set 4 m³/h

    1-2 business days delivery time

    Brand Onda Guarantee 2 year tank warranty Weight 17.9 kg Length 800 mm Height 580 mm Filter capacity at 50m³/h/m² (backwash capacity) 4.32 m³/h Filter capacity at 30m³/h/m² 2.59 m³/h Filter diameter 350mm / 14" Filter surface 0.09 m² Flow rate at 50 m/h 4.32 m³/h Sand 20 kg Engine power 0.25 kW Workload 2.5 Connection IN 1 1/2" Connection OUT 1 1/2"

    1-2 business days delivery time

    €395,00

  • Intex Krystel Clear sand filter pump 5.7m3 Intex Krystel Clear sand filter pump 5.7m3

    Intex Intex Krystel Clear sand filter pump 5.7m3

    1-2 business days delivery time

    A sand filter pump uses a filter material, such as glass beads or filter balls. A very big advantage is that this requires very little maintenance. In addition, the sand filter pump ensures that the water continues to move, so that algae, bacteria and fungi have virtually no chance to develop. This Intex sand filter pump pumps 4000 liters per hour, has a 6-way tap and has automatic operation thanks to a built-in timer, so you hardly have to worry about it anymore! This sand filter pump holds 350 grams of filter balls or 8.5 kilos of glass beads.

    1-2 business days delivery time

    €199,99

  • Sale -14% Intex Krystel Clear sand filter pump 6 m3 Intex Krystel Clear sand filter pump 6 m3

    Intex Intex Krystel Clear sand filter pump 6 m3

    1-2 business days delivery time

    Choose the convenience of keeping your water healthy and clean throughout the summer season with the Intex sand filter pumps. These are very easy to use thanks to the electronic panel and the timer that you can set manually. With the 6-way valve you can easily activate all functions: Filtration, Backwash, rinse, closed, circulation and drain. In contrast to the use of cartridge filter pumps where you often have to clean and replace the cartridges, this sand filter requires very little maintenance. If you fill the tank with sand, you can go for up to 5 years without replacing the sand. You can also fill the tank with glass sand, which you only need to replace after 8 years. This sand filter pump has 38mm hoses. If you want to connect it to swimming pools with 32mm connections, Intex swimming pools up to 17m³, you will need a set of adapter B (29061). These are not included with the sand filter set. With the adapter you can bridge the difference in diameter and thus connect the heavier sand filter pump to your swimming pool without any problems. Pump flow rate: 7.9m³ Circulation flow: 4.7m³ Power: 250W Diameter of intestines: 38mm Filter pump type: Sand filter pump Granulometry filter media: 0.4 - 0.8mm Diameter sand tank: 305mm Filter fineness: 40-50 microns (sable) Max amount of sand: 23 kg Max amount of glass filter: 16 kg Suitable for swimming pools up to 36m³ Transformer to 12 volts included, in accordance with Belgian legislation Choose the convenience of keeping your water healthy and clean throughout the summer season with the Intex sand filter pumps. These are very easy to use thanks to the electronic panel and the timer that you can set manually. With the 6-way valve you can easily activate all functions: Filtration, Backwash, rinse, closed, circulation and drain. In contrast to the use of cartridge filter pumps where you often have to clean and replace the cartridges, this sand filter requires very little maintenance. If you fill the tank with sand, you can go for up to 5 years without replacing the sand. You can also fill the tank with glass sand, which you only need to replace after 8 years.

    1-2 business days delivery time

    €279,00 €239,00

  • Interline swimming pool filter set Fiberclean 6 m³/hour black/white 8-piece

    Interline Interline swimming pool filter set Fiberclean 6 m³/hour black/white 8-piece

    1-2 business days delivery time

    The Interline Fiberclean filter set is specially designed for the use of Fiberclean. This innovative method of swimming pool filtration is a very efficient and sustainable alternative to filtration with sand filters. It has simple operation through a single on and off button. In addition, it is an energy-saving product due to the use of a smaller pump. Only 550 grams of Fiberclean is needed to fill the filter (included). This filter set is only suitable for Fiberclean filter medium of 25 liters. Specifications: Color: black, white Gender: unisex Material: plastic Minimum pump capacity: 6 m³/hour Weight: 11 kg Contents: 2 Snakes 4 Hose clamps 1 RCD plug 1 Set fiber clean

    1-2 business days delivery time

    €249,00

  • Interline swimming pool filter set Eco 6 m³/hour white 450W 8-piece

    Interline Interline swimming pool filter set Eco 6 m³/hour white 450W 8-piece

    1-2 business days delivery time

    This Interline filter set is an affordable filter set that is suitable for small and medium-sized swimming pools. The minimum pump capacity is 5 m³/hour. The air valve of the pump can be filled with fiberclean, so you can always keep your swimming pool neatly clean. Specifications: Colour White Gender: unisex Material: plastic Hose length: 2x 4.5 meters Pump power: 300 watts Voltage: 230V Minimum pump capacity: 5 m³/hour Pool capacity: 12,000 to 20,000 liters Maximum working pressure: 0.4 bar Weight: 11.5 kg Contents: 2 Snakes 4 Hose clamps 1 RCD plug 1 Set fiber clean

    1-2 business days delivery time

    €295,00

  • Interline swimming pool filter set Pro 13 m³/hour black 8-piece

    Interline Interline swimming pool filter set Pro 13 m³/hour black 8-piece

    1-2 business days delivery time

    This Interline filter set is an affordable filter set that is suitable for small and medium-sized swimming pools. The minimum pump capacity is 13 m³/hour. The air valve of the pump can be filled with fiberclean, so you can always keep your swimming pool neatly clean. Specifications: Colour black Gender: unisex Material: plastic Hose length: 2x 4.5 meters Voltage: 230V Minimum pump capacity: 13 m³/hour Swimming pool capacity: 12,000 litres Weight: 20.8kg Contents: 2 Snakes 4 Hose clamps 1 RCD plug 1 Set fiber clean

    1-2 business days delivery time

    €349,00

  • Interline swimming pool filter set Eco 5 m³/hour white 300W 8-piece

    Interline Interline swimming pool filter set Eco 5 m³/hour white 300W 8-piece

    1-2 business days delivery time

    This Interline filter set is an affordable filter set that is suitable for small and medium-sized swimming pools. The minimum pump capacity is 5 m³/hour. The air valve of the pump can be filled with fiberclean, so you can always keep your swimming pool neatly clean. Specifications: Colour White Gender: unisex Material: plastic Hose length: 2x 4.5 meters Pump power: 300 watts Voltage: 230V Minimum pump capacity: 5 m³/hour Pool capacity: 12,000 to 20,000 liters Maximum working pressure: 0.4 bar Weight: 11.5 kg Contents: 2 Snakes 4 Hose clamps 1 RCD plug 1 Set fiber clean

    1-2 business days delivery time

    €249,00

  • Bestway Flowclear Sand Filter Pump 11,400 L/h

    Bestway Bestway Flowclear Sand Filter Pump 11,400 L/h

    1-2 business days delivery time

    Sand filter incl. timer. Capacity 9.8 m³/h. For swimming pools from 1100-66600 litres. Durable, corrosion-resistant filter tank, 6-way valve. Built-in timer. Easy to read pressure gauge. Incl. ChemConnect Dispenser. This ensures a controlled release of the chlorine and a stable chemical balance. With pre-filter, adapters and hoses. Fits most above-ground swimming pools and is filled with sand or the practical Polysphere/Aqualoon. Ø tank: 38.5 cm, required sand: 36 kg, Polysphere: 1000 gr. - For swimming pools with a capacity of 1100-66600 liters. - CE/EMC approved. - Required sand: approx. 36 kg. DIMENSIONS Length 720mm Width 540mm Height 505mm

    1-2 business days delivery time

    €319,00

  • Last stock! Bestway Flowclear Sand Filter Pump 5,678 L/h Bestway Flowclear Sand Filter Pump 5,678 L/h

    Bestway Bestway Flowclear Sand Filter Pump 5,678 L/h

    1-2 business days delivery time

    The Bestway Flowclear sand filter pump is an excellent choice for keeping above-ground swimming pools clean without additives or chemicals. The filter pump is based on a natural filtration system: the water is pumped into a tank containing silica sand, which absorbs impurities and particles, producing clean water. The ChemConnect dispenser maintains and delivers clean and healthy pool water because the dispenser lock provides a stable chlorine level, which is necessary for proper chemical balance. The pre-filter strainer basket is an added mechanism that captures larger particles such as leaves, hair and dirt. It also protects your pump's impeller and helps the pump keep running smoothly. This filter pump has a 6 position valve, which can be adjusted to different settings for filtering pool water, closing (stopping the water flow), backwashing (to clean the sand bed), final rinsing (for first time set up, cleaning and sand bed leveling). ), draining water from the pool and circulating the pool water. The built-in timer lets you set an automated work period, and the top flange design allows 360° rotation for a quick and smooth installation. Note: Sand is not included in the delivery. Voltage: 220 - 240 V~ Power: 230 W Pump capacity: 5,678 L/h (1,500 US gal/h) Durable, corrosion-resistant filter tank Built-in timer allows you to set an automated work period Flange clamp top design provides 360° rotation Easy to read pressure gauge ChemConnect dispenser Pre-filter strainer basket Pre-assembled for added convenience Includes adapters compatible with 32mm valves Can also be connected to 3.8 cm threaded valves Suitable for most above ground pools from 1,100 - 39,300 L (300 - 10,400 US gallons) Required sand: #20 silica sand, 0.45 - 0.85 mm, approximately 36 kg (sand not included) 6-way valve for filtering, closing, backwashing, rinsing, draining and circulating

    1-2 business days delivery time

    €229,00

  • Bestway Flowclear Sand Filter Pump 8,330 L/h Bestway Flowclear Sand Filter Pump 8,330 L/h

    Bestway Bestway Flowclear Sand Filter Pump 8,330 L/h

    1-2 business days delivery time

    Sand filter * Pump water flow rate (pump power): 8327l/h * Integrated system water flow rate (system flow rate) pool: 6813l/h * Durable, corrosion-resistant filter tank. * 6 position valve for easy filter operation. *Top flange clamp design allows 360° rotation for quick and hassle-free installation. * Easy to read pressure gauge. * The included ChemConnect dispenser ensures clean and healthy pool water. The dispenser delivery ensures a stable chlorine level, which is necessary for the correct chemical balance. * The filter basket is an additional mechanism that captures larger particles such as leaves, hair and dirt. Protects the pump impeller and ensures that the pump lasts longer and always runs smoother. * This product is pre-assembled for added convenience. * Compatible with 3.2cm valves with the supplied adapters. * Can be connected to 3.8cm threaded valves. * This product works with normal sand or with our highly efficient Polysphere product. * Compatible with most above ground pools * Sand not included. * Required sand size: #20 silica sand, 0.45-0.85mm, approximately 20kg * For use with pools from 1100-54500l Contents: One sand filter set DIMENSIONS Length 665mm Width 505mm Height 450mm

    1-2 business days delivery time

    €249,00

  • Interline filter set Pro 16 m3/h - 800 W/1.0Hp

    Interline Interline filter set Pro 16 m3/h - 800 W/1.0Hp

    1-2 business days delivery time

    The Interline Eco filter set is an affordable filter set suitable for small and medium-sized swimming pools. The set comes complete with 2 x 4.5 m hose, 4 hose clamps and RCD plug so that it is easy to connect. The Interline Eco filter set has a 3.6/4.5/6.5/8 m3/h pump with 230V, a 19/19/31/60 liter tank, 7-way air valve and can be filled with Fiberclean or filter sand. Warranty 2 years

    1-2 business days delivery time

    €595,00

Previously viewed by you

Login

Forgot your password?

Don't have an account yet?
Create account