Enjoy clean and clear pool water with the W'eau SPE-500 side mount sand filter . This powerful filter is ideal for thoroughly cleaning pool water, so you can cool off in crystal clear water on hot days. The W'eau SPE-500 is designed for both above-ground and built-in pools up to a maximum of 48,000 litres and is resistant to high pressure and heavy loads. Made of high-quality polyethylene , this filter tank is durable and weatherproof. Thanks to the fine filtration of 25-30 microns, even the smallest impurities are removed from the pool water.
Effective Filtration Thanks to Side-Mount Design
Unlike top mount filters, the W'eau SPE-500 has a side mount design, where the 6-way valve is mounted on the side of the filter. This design ensures a better distribution of the water over the sand bed, making the filtration more efficient and thorough. In addition, the side mount design makes maintenance easier. The transparent filter lid and the air vent ensure that you can always easily check the status of the filter without opening it.
Versatile 6-Way Faucet
The W'eau SPE-500 is equipped with a versatile 6-way valve , allowing you to easily switch between different filter functions. The six settings are:
Filtering : Water flows from top to bottom through the sand bed, removing dirt and impurities.
Backwashing : The sand bed is rinsed clean by letting the water flow through the filter in the opposite direction.
Rinse : Dirty water is flushed away after backwashing, leaving the filter ready for use.
Close : Close all inputs and outputs when the filter is not in use.
Waste : Drains pool water directly to the sewer, ideal for lowering the water level.
Circulate : Allows the water to circulate without passing through the filter, ideal for chemical treatments such as algae control.
Summary:
The W'eau SPE-500 side mount sand filter is a powerful and reliable solution for keeping pool water clean. With a capacity of 12 m³/h , this filter is suitable for pools up to 48,000 litres and offers efficient and effective filtration. Thanks to the side mount design, the convenient 6-way valve and the durable material, this sand filter is ideal for both private and professional pools.
The W'eau TPP-500 top mount sand filter is a robust and efficient filter solution that ensures that your pool water always remains clean and clear. Thanks to the fine filtration capacity of 25-30 microns, this filter removes even the smallest dirt particles from your pool, allowing you to enjoy refreshing water without any worries. The filter tank is made of polyethylene (PE) reinforced with polyester , which provides extra strength and makes it resistant to high pressure and various weather conditions. This means that you can enjoy your W'eau TPP-500 sand filter for years to come, even with intensive use.
The top mount 6-way valve makes it easy to switch between different settings, allowing you to effectively filter and maintain your pool water. This filter is ideal for both above and in-ground pools with a capacity of up to 48,000 litres , and offers a maximum flow rate of 12 m³ per hour .
Functions of the 6-way valve:
Filtering : Water flows from top to bottom through the sand bed, removing dirt and impurities.
Backwashing : Water flows in the reverse direction to rinse the sand bed and remove accumulated dirt.
Rinse : Rinses away dirty water after backwashing, leaving the filter ready for use.
Close : Close all inputs and outputs of the filter when not in use.
Waste : Drains pool water directly into the sewer, for example to lower the water level.
Circulate : Allows the water to circulate without passing through the filter, ideal for chemical treatments such as algae control.
Summary:
The W'eau TPP-500 offers a durable and powerful filtration solution for pools up to 48,000 litres. With its robust polyethylene reinforced construction and the convenient top mount 6-way valve, this sand filter ensures that your pool water always remains clear and clean. This makes the TPP-500 the perfect choice for pool owners who want to combine long-term ease of use with optimum water quality.
The W'eau SPP-650 Polyester Reinforced Side Mount Sand Filter is a powerful and durable filter solution that ensures crystal clear pool water. With a maximum flow rate of 16 m³ per hour and a filtration capacity of 25-30 microns , this filter effectively removes impurities and dirt from your pool. Thanks to its strong construction of polyethylene reinforced with polyester , this sand filter is resistant to high pressure and weather conditions, which extends its lifespan and provides reliability for intensive use.
The side mount configuration ensures an even distribution of water over the sand bed, making the filtration more efficient and effective than a traditional top mount filter. Maintenance of this filter is also very easy, thanks to the transparent filter cover with air vent. This allows you to easily check the status of the filter without having to open the system.
With a capacity of 160 kg of filter material, the W'eau SPP-650 is suitable for swimming pools up to 64,000 litres and offers excellent filtration capacity for both above-ground and built-in swimming pools.
Functions of the 6-way valve:
Filtering : The water flows from top to bottom through the sand bed, removing dirt and impurities.
Backwashing : Water flows from bottom to top through the sand bed to rinse the filter material and remove accumulated dirt.
Rinse : Rinses away dirt after backwashing, leaving the filter ready for use.
Close : Close all inputs and outputs of the filter when not in use.
Waste : Drains the pool water directly into the sewer, for example to lower the water level.
Circulate : Allows the water to circulate without filtering it, ideal for chemical treatments such as algae control.
Summary:
The W'eau SPP-650 is designed for medium to large pools and offers reliable and efficient filtration. Thanks to its robust design and advanced side mount configuration, this sand filter offers a powerful and durable solution to enjoy clean and clear pool water for years to come.
The PPG Side Mount Filter 900 is a professional sand filter, designed for optimum water purification in medium to large swimming pools. It combines durability with excellent performance, thanks to a robust construction and an efficient filtration process. With a capacity ranging from 19 m³/h to 32 m³/h, a filter surface of 0.64 m², and a tank warranty of no less than 10 years, this filter is a reliable choice for both residential and commercial applications. The side mounting makes installation easy and versatile, suitable for various configurations of pool pumps and pipe systems.
Recommended use
The PPG Side Mount Filter 900 is ideal for:
Medium to large private swimming pools.
Commercial pools or spas with high usage.
Swimming pools that require an efficient and durable filtration solution.
With a long lifespan, impressive capacity and versatility, this filter is an investment in long-term water quality.
The W'eau TPE-400 top mount sand filter is a powerful solution for deep cleaning of swimming pool water, designed to ensure water quality for above ground and built-in swimming pools with a capacity of up to 24,000 litres . The fine filtration of 25-30 microns removes even the smallest impurities from the water, keeping your pool water clean and clear. The filter tank is made of high-quality polyethylene , a strong and durable material that can withstand high pressure and extreme weather conditions, which promotes the life of the filter.
The top mount 6-way valve offers six different settings, allowing you to control the direction of the water and efficiently switch between different filtration settings. The top-mounted valve provides a compact and space-saving design, ideal for pools with limited space. This sand filter is suitable for both smaller in-ground and above-ground pools.
Functions of the 6-way valve:
Filtering : Water flows from top to bottom through the sand bed, removing dirt and impurities.
Backwashing : Water flows in a reverse direction to rinse the sand bed and remove accumulated dirt.
Rinse : Rinses away dirty water after backwashing, leaving the filter ready for use.
Close : Close all inputs and outputs of the filter when not in use.
Waste : Drains pool water directly into the sewer, for example to lower the water level.
Circulate : Allows the water to circulate without passing through the filter, ideal for chemical treatments such as algae control.
Summary:
The W'eau TPE-400 offers an efficient and space-saving solution for filtering pool water, thanks to its top mount 6-way valve and strong polyethylene construction. This filter is ideal for medium-sized pools and ensures long-term ease of use, so you can always enjoy clean and clear water in your pool.
The W'eau TPP-400 top mount sand filter is an excellent solution for effectively and thoroughly cleaning your pool water. With a filtration capacity of 25-30 microns , this filter ensures that dirt and impurities are removed from the pool water, so that you can always enjoy clean and clear water. The filter tank is made of polyethylene (PE) reinforced with polyester , which provides extra durability and resistance to high pressure and weather influences. This means that the W'eau TPP-400 is designed for long-term use and reliability, even with intensive use.
The top mount 6-way valve allows you to easily switch between different functions for filtering and cleaning your pool. This valve is mounted on top of the filter, which ensures a space-saving design and ease of use. The W'eau TPP-400 is ideal for both above-ground and in-ground pools with a capacity of up to 24,000 litres and offers a maximum flow rate of 6.5 m³ per hour .
Functions of the 6-way valve:
Filtering : Water flows from top to bottom through the sand bed, removing dirt and impurities.
Backwashing : Water flows in the reverse direction to rinse the sand bed and remove accumulated dirt.
Rinse : Rinses away dirt after backwashing, leaving the filter ready for use.
Close : Close all inputs and outputs of the filter when not in use.
Waste : Drains pool water directly into the sewer, for example to lower the water level.
Circulate : Allows the water to circulate without passing through the filter, ideal for chemical treatments such as algae control.
Summary:
The W'eau TPP-400 is an efficient and durable sand filter, designed for pools up to 24,000 litres. Thanks to its strong construction of polyethylene reinforced with polyester and the convenient top mount 6-way valve, this filter ensures years of ease of use and clean pool water. This makes the W'eau TPP-400 the perfect choice for pool owners who value quality and reliability.
The W'eau TPP-650 top mount sand filter is a powerful and durable solution for keeping swimming pool water clean. Thanks to the fine filtration of 25-30 microns , this filter ensures that even the smallest dirt particles are filtered from the water, keeping the pool water clear and clean. The filter tank is made of polyethylene (PE) reinforced with polyester , which provides extra strength and is resistant to high pressure and various weather conditions. This makes the TPP-650 ideal for long-term and intensive use in both above-ground and built-in swimming pools.
The top mount 6-way valve makes it easy to switch between different functions, allowing you to optimally manage the filtration and maintenance of your pool water. Whether it's daily filtration, backwashing or treating green water, this filter has all the functions you need to keep your pool in top condition. The W'eau TPP-650 is suitable for pools with a capacity of up to 64,000 litres and offers a maximum flow rate of 16 m³ per hour .
Functions of the 6-way valve:
Filtering : Water flows from top to bottom through the sand bed, removing dirt and impurities.
Backwashing : Water flows in a reverse direction to rinse the sand bed and remove accumulated dirt.
Rinse : Rinses away dirty water after backwashing, leaving the filter ready for use.
Close : Close all inputs and outputs of the filter when not in use.
Waste : Drains pool water directly into the sewer, for example to lower the water level.
Circulate : Allows the water to circulate without passing through the sand bed, ideal for chemical treatments such as algae control.
Summary:
The W'eau TPP-650 offers a reliable and powerful filtration solution for large pools up to 64,000 litres. With its robust, polyester-reinforced construction and versatile top mount 6-way valve, this sand filter ensures long-term ease of use and optimum water quality. Ideal for pool owners looking for an efficient and durable filtration solution for their pool.
The W'eau TPE-450 top mount sand filter offers a powerful and reliable solution for thoroughly cleaning pool water. Thanks to the fine filtration of 25-30 microns , this filter removes even the smallest impurities, so that your pool water remains clear and clean. The filter vessel is made of high-quality polyethylene (PE) , which ensures a robust construction that can withstand high pressure and extreme weather conditions, making the filter perfect for intensive use.
The top mount 6-way valve offers six different settings and is positioned on top of the filter, which provides a space-saving design and ease of use. This sand filter is ideal for both above-ground and in-ground pools with a capacity of up to 32,000 litres and offers a maximum flow rate of 8 m³ per hour .
Functions of the 6-way valve:
Filtering : Water flows from top to bottom through the sand bed, removing dirt and impurities.
Backwashing : Water flows in the reverse direction to rinse the sand bed and remove accumulated dirt.
Rinse : Rinses away dirty water after backwashing, leaving the filter ready for use.
Close : Close all inputs and outputs of the filter when not in use.
Waste : Drains pool water directly into the sewer, for example to lower the water level.
Circulate : Allows the water to circulate without passing through the sand bed, ideal for chemical treatments such as algae control.
Summary:
The W'eau TPE-450 is an excellent choice for medium sized pools that require a powerful, efficient and easy to use filtration solution. With its sturdy polyethylene construction, convenient top mount valve and simple operation, this sand filter will keep your pool water clear and clean, giving you years of worry-free pool enjoyment.
The W'eau SPP-500 polyester reinforced side mount sand filter is a powerful filter solution for effectively cleaning swimming pool water. With a maximum flow of 12 m³ per hour and a fine filtration of 25-30 microns , this sand filter guarantees clean and clear water in swimming pools with a capacity of up to 48,000 litres . Thanks to its robust construction, made of polyethylene reinforced with polyester , the SPP-500 is resistant to high pressure and heavy weather conditions. This makes the filter tank extremely durable and ideal for long-term use.
The side mount filter is designed to distribute water evenly across the sand bed, which provides more efficient and thorough filtration than a top mount filter. Additionally, the side mount configuration is easier to maintain thanks to the clear filter lid and breather, which allows you to easily check the status of the filter without opening it.
The W'eau SPP-500's 6-way tap offers six different modes, including filtering, backwashing, rinsing, and more, giving you complete control over the filtration process.
Functions of the 6-way valve:
Filtering : Water flows through the filter from top to bottom, removing dirt and impurities.
Backwashing : Water flows in the reverse direction to rinse the sand bed and remove accumulated dirt.
Rinse : Rinses away dirt after backwashing, making the filter ready for use again.
Close : Close all inputs and outputs of the filter when not in use.
Waste : Drains pool water directly into the sewer, for example to lower the water level.
Circulate : Allows the water to circulate without passing through the sand bed, ideal for chemical treatments such as algae control.
Conclusion:
The W'eau SPP-500 is an excellent choice for medium-sized pools that require a reliable, efficient and easy-to-maintain sand filter. With its durable construction and advanced filtration capacity, this filter provides a long-lasting solution for clean and clear pool water.
The W'eau SPP-700 polyester reinforced side mount sand filter is a powerful and robust solution for thoroughly cleaning swimming pool water. With a maximum flow of 20 m³ per hour and a fine filtration of 25-30 microns , this sand filter guarantees crystal clear water for large swimming pools up to 80,000 litres . The filter tank is made of polyethylene reinforced with polyester , which provides extra strength and durability. This makes the SPP-700 resistant to high pressure and extreme weather conditions, making it suitable for long-term use in both above-ground and built-in swimming pools.
The side mount configuration distributes water evenly across the sand bed, resulting in more efficient filtration compared to traditional top mount filters. Filter maintenance is easy thanks to the clear lid with breather, which allows you to check the condition of the filter without opening the system.
The 6-way valve offers different positions to optimize the filtering process. This allows the system to be easily adapted for filtering, backwashing, rinsing, and more.
Functions of the 6-way valve:
Filtering : Water flows from top to bottom through the sand bed, removing dirt and impurities.
Backwashing : Water flows in a reverse direction to rinse the sand bed and remove accumulated dirt.
Rinse : Rinses away dirt after backwashing, leaving the filter ready for use.
Close : Close all inputs and outputs of the filter when not in use.
Waste : Drains pool water directly into the sewer, for example to lower the water level.
Circulate : Allows the water to circulate without filtering it, ideal for chemical treatments such as algae control.
Summary:
The W'eau SPP-700 offers a reliable and efficient filtration solution for large pools. With its sturdy polyester reinforced construction and advanced side mount configuration, this sand filter offers the ideal combination of power, durability and ease of use, ensuring clean and clear pool water.
The W'eau SPP-450 polyester reinforced side mount sand filter is a powerful solution for thoroughly cleaning swimming pool water. With a maximum flow of 8 m³ per hour and a fine filtration of 25-30 microns , this sand filter ensures that dirt and impurities are effectively filtered from your pool water. This makes your pool water clean and clear, so that you can optimally enjoy a refreshing dip.
The SPP-450 is made of polyethylene , reinforced with polyester , which makes the filter vessel extra robust and resistant to high pressure and heavy conditions. This reinforced construction ensures a long life, even with intensive use and under changing weather conditions. The side mount arrangement ensures a better distribution of the water over the sand bed, resulting in more efficient filtration compared to a top mount filter.
The 6-way valve makes the W'eau SPP-450 very user-friendly, with functions for filtering, backwashing, rinsing, and more. The transparent filter lid with air vent makes maintenance easy, because you can quickly see the condition of the filter without having to open it.
Functions of the 6-way valve:
Filtering : Water flows through the filter from top to bottom, removing dirt and impurities.
Backwashing : Water flows in a reverse direction to rinse the sand bed and remove accumulated dirt.
Rinse : Rinses away dirty water after backwashing, leaving the filter ready for use.
Close : Close all inputs and outputs of the filter when not in use.
Waste : Drains pool water directly into the sewer, for example to lower the water level.
Circulate : Allows the water to circulate without passing it through the filter, useful for chemical treatments such as algae control.
Designed for both small and medium sized pools, the W'eau SPP-450 provides reliable, efficient filtration. With its durable materials and easy maintenance thanks to the 6-way valve and transparent filter cover, this filter is an excellent choice for pool owners who want to ensure clean and clear water.
The W'eau SPO-650 polyester side mount sand filter is one of the best in its class and a popular choice for efficiently and thoroughly cleaning pool water. This sand filter ensures that the water in your pool remains clear and clean, thanks to the fine filtration of 25-30 microns , which removes the smallest impurities from the water. The filter vessel is made of high-quality polyester and finished with a smooth gelcoat fiberglass, which ensures a long life and excellent resistance to various weather conditions.
The SPO-650 sand filter is equipped with a side mount connection , which means that the 6-way valve is mounted on the side of the filter. This type of mounting ensures a better distribution of the water over the sand bed, which results in a more efficient and thorough filtration. In addition, the side mount construction makes maintenance easier, partly due to the air vent and transparent lid, which allows you to easily look into the filter without opening it.
With a flow rate of 16 m³ per hour, the W'eau SPO-650 is suitable for larger pools with a capacity of up to 64,000 litres . This makes the filter ideal for both private and commercial pools that require powerful and durable filtration.
Functions of the 6-way valve:
Filtering : Water flows from top to bottom through the filter bed, removing dirt and impurities.
Backwashing : Water flows from bottom to top through the filter bed to clean the filter material and remove accumulated dirt.
Rinse : Rinses away dirt after backwashing, leaving the filter ready for next use.
Close : Close all inputs and outputs of the filter when not in use.
Waste : Drains pool water directly into the sewer, for example to lower the water level.
Circulate : Allows the water to circulate without filtering it, useful for chemical treatments such as algae control.
Scope of delivery:
Polyester sand filter tank
6-way valve with all functions
Connection material for 50 mm glue connection and 38 mm thread connection
Easy Installation Guide
The W'eau SPO-650 is the perfect choice for those looking for a durable and efficient sand filter for larger pools. With its robust polyester construction, precise filtration and easy maintenance, this sand filter ensures clear and clean water, so you can enjoy your pool to the fullest.
The W'eau SPO-500 polyester side mount sand filter offers a high-quality solution for thoroughly cleaning swimming pool water. With its durable construction and effective filtration, this sand filter is an excellent choice for swimming pools up to 40,000 litres . The SPO-500 filters the water extremely accurately with a filtration of 25-30 microns , which ensures clear and clean swimming water. The robust construction of the filter tank is made of polyester and finished with a smooth gelcoat fibreglass , making it resistant to long-term use and weather influences.
This side mount sand filter is equipped with a 6-way valve , which in addition to the standard filter function also supports backwashing, rinsing, circulating, and other useful functions. A side mount filter such as the SPO-500 ensures that the water is better distributed over the sand bed, resulting in more efficient filtration and easier maintenance. In addition, the filter has a convenient air vent and a transparent lid, which allows you to easily look into the filter without opening it.
The W'eau SPO-500 is suitable for swimming pools with a maximum water content of 40,000 litres and can handle a flow of 10 m³ per hour . The standard connections are a 50 mm glue connection and a 38 mm threaded connection , which makes installation easier. The set is supplied complete with all necessary connections to carry out the installation quickly and easily.
Functions of the 6-way valve:
Filtering : Water flows through the filter from top to bottom, for standard water filtration.
Backwashing : Water flows in the reverse direction (from bottom to top) to rinse the sand clean and remove accumulated dirt.
Rinse : Flush away dirty water after backwashing, making the filter ready for use again.
Close : Close all inputs and outputs of the filter when not in use.
Waste : Drains the pool water directly into the sewer, for example to lower the water level.
Circulate : Allows the water to circulate without filtering it, useful for chemical treatments such as algae control.
Scope of delivery:
Polyester sand filter tank
6-way valve with all functions
Connection material for 50 mm glue connection and 38 mm thread connection
Easy Installation Guide
The W'eau SPO-500 is the ideal choice for pool owners looking for a powerful, durable and easy-to-use sand filter. With its high-quality materials and efficient filtration, this set ensures clean and clear pool water throughout the summer.
The W'eau SPE-650 side mount sand filter is a powerful and reliable solution to keep your pool water crystal clear at all times. Whether it's an above-ground or built-in pool, this filter can thoroughly clean your pool water, so you can always take a refreshing dip. Thanks to the robust polyethylene material, the W'eau SPE-650 can withstand high pressure and heavy loads, making it perfect for intensive use and long-lasting performance. This sand filter is suitable for pools up to 64,000 litres and offers fine filtration down to 25-30 microns , removing even the smallest dirt particles.
Effective Filtration Thanks to Side-Mount Design
The W'eau SPE-650 is equipped with a side mount filter . In contrast to top mount filters, the 6-way valve is placed on the side of the filter vessel. This ensures a more efficient distribution of the water over the sand bed, resulting in more effective filtration. In addition, the side mount design makes maintenance easier. With the air vent and the transparent filter cover you can easily check the status of the filter without opening it.
Versatile 6-Way Faucet
The 6-way valve of the W'eau SPE-650 offers versatile possibilities for different filtration functions. This allows you to easily switch between different positions, depending on what your pool needs:
Filtering : The water flows from top to bottom through the sand bed, removing dirt and impurities.
Backwashing : The sand bed is rinsed clean by letting the water flow in the opposite direction.
Rinse : Rinse away dirty water after backwashing so the filter is ready for use.
Close : Close all inputs and outputs when the filter is not in use.
Waste : Drain pool water directly to the sewer, useful for lowering the water level.
Circulate : Allows the water to circulate without passing through the filter, ideal for treating water with chemicals such as algae control.
Summary:
The W'eau SPE-650 side mount sand filter is the ideal choice for large pools up to 64,000 litres . With its sturdy construction, efficient side mount design and versatile 6-way valve, this filter ensures thorough cleaning of your pool water. Thanks to the easy maintenance options and fine filtration capacity of 25-30 microns , your pool will always remain clean and clear, ready for a refreshing dip.
The Atlas Sand Filter 750 is a powerful and durable sand filter specially designed for large swimming pools with a water content of up to 200,000 litres. This high-quality sand filter has a diameter of 75 cm and an impressive filter capacity of 22 m³ per hour, making it capable of efficiently keeping even the largest swimming pools clean. Made of reinforced polyester and fibreglass, the sand filter offers maximum protection against corrosion and extreme weather conditions, ensuring a long life and reliability.
The included 6-way valve allows you to easily switch between different functions such as filtering, backwashing, rinsing, recirculating, draining and closing. This makes the filter very user-friendly and easy to maintain. The Atlas Sand Filter 750 is equipped with a pressure gauge for accurate pressure measurement, as well as a manual air and water drain for extra safety. The transparent lid makes it possible to easily check the status of the filter without having to open it, which makes maintenance easier.
This sand filter works optimally with both sand and glass filter media, ensuring efficient filtration and keeping pool water crystal clear. Thanks to its sturdy construction and advanced technology, the Atlas Sand Filter 750 is ideal for both residential and commercial pools looking for a robust and reliable filtration system.
Conclusion
The Atlas Sand Filter 750 is an excellent choice for large pools looking for a reliable and durable water filtration solution. With its high capacity, robust construction and easy-to-use 6-way valve, this filter provides everything you need to keep your pool water crystal clear and clean. While it can be a bit more heavy and space-intensive to install, the efficiency, durability and safety features of the Atlas Sand Filter 750 make it an excellent investment for long-lasting performance.
The Atlas Sand Filter 600 is a high-quality and reliable sand filter that is specially designed to optimally maintain the water quality of swimming pools up to 80,000 litres. With a diameter of 600 mm and an impressive filtration capacity of 14.2 m³ per hour, this filter is an excellent choice for larger swimming pools, both private and commercial. The filter is made of durable reinforced polyester and fibreglass and offers maximum protection against corrosion and wear, ensuring a long service life.
This sand filter is equipped with a user-friendly 6-way valve , which allows you to easily switch between different modes such as filtering, backwashing, rinsing, recirculating, draining and closing. The built-in pressure gauge clearly displays the pressure in the system, so you can always monitor the performance of the filter. Thanks to its robust construction and safety features, including a manual air and water drain, the Atlas Sand Filter 600 is a reliable partner for keeping your pool water clean.
With a filtration surface of 0.30 m² and a filtration speed of 15 m³ per hour, the filter ensures that all dirt is filtered out of the pool water, resulting in clear and clean water. The filter can be filled with 190 kg of sand or a combination of glass filter media for an even higher filtration efficiency.
Conclusion
The Atlas Sand Filter 600 is an excellent choice for large pools thanks to its high filtration capacity, robust construction and user-friendly operation. This sand filter offers reliable performance and ensures crystal clear water in pools up to 80,000 litres. Although installation can be somewhat difficult due to the large amount of filter media, the durable construction and efficient design offer long-term reliability and optimum performance. For those looking for a powerful, durable and easy-to-use sand filter, the Atlas Sand Filter 600 is an ideal solution.
The GRE Sand Filter range is a range of compact filters that are easy to install and use, do not require any special attention and adapt to any removable pool. The sand filtration monoblocks have a complete filtration set, including pump, filter, selector valve, pressure gauge... all mounted on a plastic base with all the necessary pipe accessories. GRE Sand Filter systems are certified according to the European standard, which guarantees that they comply with the safety regulations in force.
Product features:
Sand filter for above ground pools
Filter capacity 4000 liters per hour at a power of 180 W
It is very compact
Easy to install and maintain
Thanks to the 5-way selector valve, various functions can be performed: flushing, filtering, emptying and closing
Bucket with a diameter of 320 mm
Consists of a capacity of 0.24 HP
Includes a pressure gauge that indicates the pump's flow pressure
Suitable for filtering substances such as: sand glass and Aqualoon
Allows a sand load of ± 20 kg (not included)
Requires 38mm diameter hoses (not included)
Color: gray
Dimensions: 53 x 41 x 60 cm
Sand filter * Pump with RCD plug * Pump water flow rate (pump power): 3028l/h * Integrated system water flow rate (system flow rate) pool: 2271l/h * Durable, corrosion-resistant filter tank. * 6 position valve for easy filter operation. *The top flange clamp allows 360° rotation for quick and hassle-free installation. * Easy to read pressure gauge. * The included ChemConnect dispenser ensures clean and healthy pool water. The dispenser delivery ensures a stable chlorine level, which is necessary for the correct chemical balance. * With a sieve for separating leaves and other coarse dirt. * This product is pre-assembled for added convenience. *The recommended hose size for this product is 3.2cm diameter with appropriate thread size. * This product works with normal sand or with our highly efficient Polysphere product. *Sand not included. * Required sand size: #20 silica sand, 0.45-0.85 mm, approximately 8.5kg * For use with 1100-18100 l pools Contents: One sand filter set
DIMENSIONS
Length 360mm
Width 525mm
Height 360mm
The W'eau TPP-700 top mount sand filter is a powerful and durable filter system that keeps your pool water thoroughly clean. With a fine filtration of 25-30 microns , this filter removes even the smallest impurities, so you can always enjoy clear and fresh pool water. The filter tank is made of polyethylene (PE) reinforced with polyester , which provides extra strength and makes it resistant to high pressure and various weather conditions. This means that the W'eau TPP-700 will last for years, even with intensive use.
The top mount 6-way valve allows you to easily switch between the different functions to effectively filter and maintain the pool water. This filter is suitable for both above-ground and built-in pools with a capacity of up to 80,000 litres , and offers a maximum flow rate of 20 m³ per hour , making it ideal for larger pools.
Product Description: W'eau TPP-700 Polyester Reinforced Top Mount Sand Filter - 20 m³/h
The W'eau TPP-700 top mount sand filter is a powerful and durable filter system that keeps your pool water thoroughly clean. With a fine filtration of 25-30 microns , this filter removes even the smallest impurities, so you can always enjoy clear and fresh pool water. The filter tank is made of polyethylene (PE) reinforced with polyester , which provides extra strength and makes it resistant to high pressure and various weather conditions. This means that the W'eau TPP-700 will last for years, even with intensive use.
The top mount 6-way valve allows you to easily switch between the different functions to effectively filter and maintain the pool water. This filter is suitable for both above-ground and built-in pools with a capacity of up to 80,000 litres , and offers a maximum flow rate of 20 m³ per hour , making it ideal for larger pools.
Functions of the 6-way valve:
Filtering : The water flows from top to bottom through the sand bed, collecting dirt and impurities.
Backwashing : The water flows in the reverse direction to rinse the sand bed and remove any accumulated dirt.
Rinse : Rinses away dirty water after backwashing, leaving the filter ready for use.
Close : Close all inputs and outputs of the filter when not in use.
Waste : Drains pool water directly into the sewer, for example to lower the water level.
Circulate : Allows the water to circulate without passing through the sand bed, ideal for chemical treatments such as algae control.
Summary:
The W'eau TPP-700 offers a robust and efficient filtration solution for larger pools. Thanks to its strong polyester reinforced construction and versatile top mount 6-way valve, this sand filter ensures optimum water quality and long-term ease of use. Ideal for pool owners looking for a powerful filtration system for pools up to 80,000 litres.
The W'eau TPP-450 top mount sand filter is a powerful and durable solution for effectively cleaning your pool water. Thanks to the fine filtration of 25-30 microns , this filter removes small impurities from the water, so that your pool water remains clean and clear. The filter tank is made of polyethylene (PE) reinforced with polyester , which provides extra strength and makes it resistant to high pressure and weather conditions. This means that the W'eau TPP-450 lasts a long time and is suitable for intensive use in both above-ground and built-in swimming pools.
The top mount 6-way valve offers versatility and ease of use with different settings that are easy to set depending on the need. Whether it is daily maintenance or intensive cleaning, this filter is perfect for pools with a capacity of up to 32,000 litres , and offers a maximum flow of 8 m³ per hour .
Functions of the 6-way valve:
Filtering : Water flows from top to bottom through the sand bed, removing dirt and impurities.
Backwashing : Water flows in the reverse direction to rinse the sand bed and remove accumulated dirt.
Rinse : Rinses away dirt after backwashing, leaving the filter ready for use.
Close : Close all inputs and outputs of the filter when not in use.
Waste : Drains pool water directly into the sewer, for example to lower the water level.
Circulate : Allows the water to circulate without passing through the sand bed, ideal for chemical treatments such as algae control.
Summary:
The W'eau TPP-450 offers a reliable and efficient filtration solution for medium-sized pools. With its robust construction of polyethylene reinforced with polyester, and the convenient top mount 6-way valve, this sand filter ensures years of trouble-free use. Enjoy clear and clean pool water, so you can swim and relax in your own garden without a care in the world.
The W'eau TPE-500 top mount sand filter is a powerful and reliable filter solution, designed to thoroughly clean and keep pool water clean. With a fine filtration of 25-30 microns , this filter removes even the smallest impurities from the water, leaving your pool water crystal clear. The filter vessel is made of high-quality polyethylene (PE) , which ensures a robust construction that can withstand heavy loads, high pressure and various weather conditions, ensuring a long service life.
The top mount 6-way valve offers versatility and convenience by allowing you to easily divert the water using different settings. The valve is mounted on top of the filter, which makes for a space-saving design. The W'eau TPE-500 is suitable for both above-ground and in-ground pools with a capacity of up to 48,000 litres , making it an excellent choice for medium to larger pools.
Functions of the 6-way valve:
Filtering : The water flows from top to bottom through the sand bed, removing dirt and impurities.
Backwashing : Water flows in a reverse direction to rinse the sand bed and remove accumulated dirt.
Rinse : Rinses away dirt after backwashing, leaving the filter ready for use.
Close : Close all inputs and outputs of the filter when not in use.
Waste : Drains pool water directly into the sewer, for example to lower the water level.
Circulate : Allows the water to circulate without passing through the sand bed, ideal for chemical treatments such as algae control.
Summary:
The W'eau TPE-500 provides an efficient and powerful filtration solution for pools up to 48,000 litres. With its robust construction and versatile top mount 6-way valve, this sand filter ensures your pool water stays clean and clear. Perfect for both above and inground pools, its durable design means this filter will last for years to come.
The W'eau SPE-450 side mount sand filter offers a powerful and efficient solution for keeping pool water clean. With its robust polyethylene construction, the sand filter is resistant to high pressure and intensive use. This makes it perfectly suitable for both above-ground and built-in pools up to 32,000 litres . Thanks to the fine filtration of 25-30 microns, the W'eau SPE-450 ensures that even the smallest dirt particles are removed, so that you can always enjoy clear and clean water.
Effective Filtration Thanks to Side-Mount Design
Unlike a top mount filter, the W'eau SPE-450 has a side mount design, where the 6-way valve is mounted on the side of the filter vessel. This ensures that the water is distributed more efficiently over the sand bed, resulting in better filtration. In addition, a side mount filter is easier to maintain, partly due to the air vent and the transparent filter lid , which allows you to easily check the condition of the filter without having to open it.
6-Way Faucet for Versatile Functions
The 6-way valve of the W'eau SPE-450 makes it easy to switch between different functions. This allows you to optimize the filtering process and efficiently maintain your pool water. The 6 positions are:
Filtering : Water flows from top to bottom through the sand bed to remove dirt and impurities.
Backwashing : The water flows in the reverse direction to rinse the sand bed clean.
Rinse : Rinse away dirty water after backwashing so the filter is ready for use.
Close : Close all inputs and outputs when the filter is not in use.
Waste : Dispose of pool water directly to the sewer, for example to lower the water level.
Circulate : Allows the water to circulate without passing through the filter, ideal for chemical treatments such as algae control.
Summary:
The W'eau SPE-450 side mount sand filter is an excellent choice for pools up to 32,000 litres. With its robust construction, fine filtration and convenient 6-way valve, it ensures clear pool water and easy maintenance. Thanks to the side mount design, this filter is efficient in use and easy to maintain, making it an ideal choice for pool owners looking for a reliable and powerful filtration solution.
The W'eau SPO-750 polyester side mount sand filter is a high-quality solution for effectively filtering large swimming pools. This powerful sand filter has a maximum flow rate of 22 m³ per hour , making it ideal for cleaning swimming pools with a capacity of up to 88,000 litres . With a fine filtration of 25-30 microns , this sand filter ensures that even the smallest impurities are filtered from the water, so that the pool water remains clear and clean.
The side mount filter is equipped with a 6-way valve , which is located on the side of the filter. This design ensures a better distribution of the water over the sand bed, resulting in a more efficient and effective filtration compared to a top mount filter. In addition, the side mount filter is easier to maintain thanks to the transparent filter cover with a breather, which allows you to easily check the condition of the filter without opening the system.
The filter tank is made of laminated polyester , which ensures a robust and durable construction that can withstand high loads. This makes the W'eau SPO-750 suitable for intensive use in large swimming pools, both above-ground and built-in pools. The filter tank has a height of 98 cm and a diameter of 75 cm , and offers space for no less than 230 kg of filter material.
Functions of the 6-way valve:
Filtering : Water flows from top to bottom through the sand bed, removing dirt and impurities.
Backwashing : Water flows in a reverse direction to rinse the sand bed and remove accumulated dirt.
Rinse : Rinses away dirt after backwashing, leaving the filter ready for use.
Close : Close all inputs and outputs of the filter when not in use.
Waste : Drains pool water directly into the sewer, for example to lower the water level.
Circulate : Allows the water to circulate without passing through the sand bed, useful for chemical treatments such as algae control.
The W'eau SPO-750 is one of the best choices for large pools that require powerful, efficient and durable filtration. With its sturdy polyester construction, efficient side mount design and user-friendly features, this sand filter offers everything you need for crystal clear pool water.
The W'eau SPO-900 polyester side mount sand filter is a powerful and efficient solution for filtering large swimming pools. With a maximum flow of 32 m³ per hour, this sand filter is perfect for swimming pools up to 128,000 litres . The filtration capacity of 25-30 microns ensures that even the smallest impurities are filtered from the water, so that your pool water always remains clean and clear. This makes the W'eau SPO-900 ideal for intensive use in large built-in and above-ground swimming pools.
The side mount filter differs from other sand filters in that the 6-way valve is located on the side of the filter instead of on the top. This ensures a more efficient distribution of the water over the sand bed, which leads to better filtration. The filter is made of laminated polyester , which makes it resistant to heavy loads and long-term use. In addition, the transparent filter cover is equipped with a breather, so you can easily check the condition of the filter without having to open it.
With a capacity of 400 kg of filter material and standard 63 mm connections, the W'eau SPO-900 is easy to install and offers maximum performance for large pools. The filter tank has a height of 110 cm and a diameter of 90 cm , which ensures sufficient capacity to filter large volumes of water.
Key Features:
Maximum flow : 32 m³/h
Maximum pool capacity : Suitable for pools up to 128,000 litres (128 m³)
Filtration capacity : 25-30 micron (for fine filtration)
Filter vessel material : Laminated polyester
Sand filter type : Side Mount for more efficient water distribution
Filter tank capacity : 400 kg filter material (filter sand or filter glass)
Standard connection : 63 mm
Functions of the 6-way valve:
Filtering : Water flows from top to bottom through the sand bed, removing dirt and impurities.
Backwashing : Water flows in a reverse direction to rinse the sand bed and remove accumulated dirt.
Rinse : Rinses away dirt after backwashing, leaving the filter ready for use.
Close : Close all inputs and outputs of the filter when not in use.
Waste : Drains pool water directly into the sewer, for example to lower the water level.
Circulate : Allows the water to circulate without passing through the sand bed, useful for chemical treatments such as algae control.
The W'eau SPO-900 is an ideal solution for large pools that require efficient and durable filtration. With its robust construction and powerful filtration capacity, this side mount sand filter is perfect for intensive use and easy maintenance, allowing you to enjoy clear and clean pool water for years to come.
The Blackline from Waterco is a wound sidemount filter made of UV resistant polyester.
This filter comes with:
Sidemount 6-way valve;
Pressure gauge;
Coupling set;
Equipped with star-shaped filter candles.
Specifications:
Outside diameter
Ø 720 mm
Height
820 mm
Filter sand filling
190 kg
Glass media filling
160 kg
Glass bead filling
209 kg
Vitrosphere filling
160 kg
Depth of filter bed
500 mm
Connection size
1.5" / 50 mm
Maximum working pressure
2.5 bar
Maximum pool
115 m³
Diameter inside
Ø 700 mm
Flow
19 m³/hour
Manual
The Blackline from Waterco is a wound sidemount filter made of UV resistant polyester.
This filter comes with:
Sidemount 6-way valve;
Pressure gauge;
Coupling set;
Equipped with star-shaped filter candles.
Specifications:
Outside diameter
Ø 622 mm
Height
800 mm
Filter sand filling
140 kg
Glass media filling
120 kg
Glass bead filling
154 kg
Vitrosphere filling
120 kg
Depth of filter bed
475 mm
Connection size
1.5" / 50 mm
Maximum working pressure
2.5 bar
Maximum pool
85 m³
Diameter inside
Ø 600 mm
Flow
14 m³/hour
Manual
The Blackline from Waterco is a wound sidemount filter made of UV resistant polyester.
This filter comes with:
Sidemount 6-way valve;
Pressure gauge;
Coupling set;
Equipped with star-shaped filter candles.
Specifications:
Outside diameter
Ø 520 mm
Height
730 mm
Filter sand filling
90 kg
Glass media filling
75 kg
Glass bead filling
99 kg
Vitrosphere filling
75 kg
Depth of filter bed
450 mm
Connection size
1.5" / 50 mm
Maximum working pressure
2.5 bar
Maximum pool
60 m³
Diameter inside
Ø 500 mm
Flow
10 m³/hour
Manual
Top quality laminated filter – Side connection
In our search for an exclusive high-end filter that meets the expectations of the demanding swimming pool builder, we have chosen to combine two well-known products and bundle their most distinctive properties to create a top-quality filter. We have combined the proven reliability of Lacron filters with the most important components used in industrial filters.
The filter tank is extra reinforced at all critical points. We used a commercial grade filter cover with herringbone distribution arms and added an industry class drain stop. The Waterco multi-way valve with its typical elbows completes this filter that proudly bears the name Deluxe.
Advantages
Large transparent lid of 8" including vent valve and pressure gauge with solid quick-release ring, glass fiber reinforced for maximum durability.
Large double drain plug to drain only water or water and filter media at the same time.
Large, sturdy industrial-quality base for stable floor mounting.
Diffuser with large inlet opening and easily accessible ventilation system.
How does it work?
6-way valve
Metric and imperial quick couplings
Robust ABS construction
Durable lever action handle
6-way valve with multiple valve positions
Components made of high-quality stainless steel
Manometer
Wear-resistant rotor
Transparent sight glass for checking backwash cycle
Distribution arms in herringbone pattern
“Dead spots” can occur between the distribution arms, preventing the water from flowing optimally through the filter bed. The smart system with distribution arms in a herringbone pattern from Waterco prevents "dead spots" by ensuring optimal flow in the filter bed.
Footnotes
The valve is automatically added and charged separately.
Brand
PPG
Guarantee
10 year tank warranty
Weight
46 kg
Height
1001 mm
Filter capacity at 50m³/h/m² (backwash capacity)
30 m³/h
Filter capacity at 30m³/h/m²
18 m³/h
Filter diameter
914mm / 36"
Filter surface
0.64 m²
Distance from ground
370 mm
Remote connections
204 mm
Sand
350 kg
Gravel
100 kg
AFM Grade 1
189 kg
AFM Grade 2
105 kg
AFM Grade 3
84 kg
Connection IN
2"
Connection OUT
2"
Top quality laminated filter – Side connection
In our search for an exclusive high-end filter that meets the expectations of the demanding swimming pool builder, we have chosen to combine two well-known products and bundle their most distinctive properties to create a top-quality filter. We have combined the proven reliability of Lacron filters with the most important components used in industrial filters.
The filter tank is extra reinforced at all critical points. We used a commercial grade filter cover with herringbone distribution arms and added an industry class drain stop. The Waterco multi-way valve with its typical elbows completes this filter that proudly bears the name Deluxe.
Advantages
Large transparent lid of 8" including vent valve and pressure gauge with solid quick-release ring, glass fiber reinforced for maximum durability.
Large double drain plug to drain only water or water and filter media at the same time.
Large, sturdy industrial-quality base for stable floor mounting.
Diffuser with large inlet opening and easily accessible ventilation system.
How does it work?
6-way valve
Metric and imperial quick couplings
Robust ABS construction
Durable lever action handle
6-way valve with multiple valve positions
Components made of high-quality stainless steel
Manometer
Wear-resistant rotor
Transparent sight glass for checking backwash cycle
Distribution arms in herringbone pattern
“Dead spots” can occur between the distribution arms, preventing the water from flowing optimally through the filter bed. The smart system with distribution arms in a herringbone pattern from Waterco prevents "dead spots" by ensuring optimal flow in the filter bed.
Footnotes
The valve is automatically added and charged separately.
Brand
PPG
Guarantee
10 year tank warranty
Weight
37 kg
Height
780 mm
Filter capacity at 50m³/h/m² (backwash capacity)
23 m³/h
Filter capacity at 30m³/h/m²
14 m³/h
Filter diameter
760mm / 30"
Filter surface
0.44 m²
Distance from ground
290 mm
Remote connections
215 mm
Sand
175 kg
Gravel
50 kg
AFM Grade 1
105 kg
AFM Grade 2
84 kg
Connection IN
2"
Connection OUT
2"
Top quality laminated filter – Side connection
In our search for an exclusive high-end filter that meets the expectations of the demanding swimming pool builder, we have chosen to combine two well-known products and bundle their most distinctive properties to create a top-quality filter. We have combined the proven reliability of Lacron filters with the most important components used in industrial filters.
The filter tank is extra reinforced at all critical points. We used a commercial grade filter cover with herringbone distribution arms and added an industry class drain stop. The Waterco multi-way valve with its typical elbows completes this filter that proudly bears the name Deluxe.
Advantages
Large transparent lid of 8" including vent valve and pressure gauge with solid quick-release ring, glass fiber reinforced for maximum durability.
Large double drain plug to drain only water or water and filter media at the same time.
Large, sturdy industrial-quality base for stable floor mounting.
Diffuser with large inlet opening and easily accessible ventilation system.
How does it work?
6-way valve
Metric and imperial quick couplings
Robust ABS construction
Durable lever action handle
6-way valve with multiple valve positions
Components made of high-quality stainless steel
Manometer
Wear-resistant rotor
Transparent sight glass for checking backwash cycle
Distribution arms in herringbone pattern
“Dead spots” can occur between the distribution arms, preventing the water from flowing optimally through the filter bed. The smart system with distribution arms in a herringbone pattern from Waterco prevents "dead spots" by ensuring optimal flow in the filter bed.
Footnotes
The valve is automatically added and charged separately.
Brand
PPG
Guarantee
10 year tank warranty
Weight
30 kg
Height
760 mm
Filter capacity at 50m³/h/m² (backwash capacity)
15 m³/h
Filter capacity at 30m³/h/m²
9 m³/h
Filter diameter
600mm / 24"
Filter surface
0.3 m²
Distance from ground
295 mm
Remote connections
204 mm
Sand
100 kg
Gravel
25 kg
AFM Grade 1
63 kg
AFM Grade 2
63 kg
Connection IN
1 1/2"
Connection OUT
1 1/2"
Top quality laminated filter – Side connection
In our search for an exclusive high-end filter that meets the expectations of the demanding swimming pool builder, we have chosen to combine two well-known products and bundle their most distinctive properties to create a top-quality filter. We have combined the proven reliability of Lacron filters with the most important components used in industrial filters.
The filter tank is extra reinforced at all critical points. We used a commercial grade filter cover with herringbone distribution arms and added an industry class drain stop. The Waterco multi-way valve with its typical elbows completes this filter that proudly bears the name Deluxe.
Advantages
Large transparent lid of 8" including vent valve and pressure gauge with solid quick-release ring, glass fiber reinforced for maximum durability.
Large double drain plug to drain only water or water and filter media at the same time.
Large, sturdy industrial-quality base for stable floor mounting.
Diffuser with large inlet opening and easily accessible ventilation system.
How does it work?
6-way valve
Metric and imperial quick couplings
Robust ABS construction
Durable lever action handle
6-way valve with multiple valve positions
Components made of high-quality stainless steel
Manometer
Wear-resistant rotor
Transparent sight glass for checking backwash cycle
Distribution arms in herringbone pattern
“Dead spots” can occur between the distribution arms, preventing the water from flowing optimally through the filter bed. The smart system with distribution arms in a herringbone pattern from Waterco prevents "dead spots" by ensuring optimal flow in the filter bed.
Footnotes
The valve is automatically added and charged separately.
Brand
PPG
Guarantee
10 year tank warranty
Weight
30 kg
Height
700 mm
Filter capacity at 50m³/h/m² (backwash capacity)
10 m³/h
Filter capacity at 30m³/h/m²
6 m³/h
Filter diameter
500mm / 20"
Filter surface
0.2 m²
Distance from ground
265 mm
Remote connections
204 mm
Sand
75 kg
Gravel
25 kg
AFM Grade 1
42 kg
AFM Grade 2
42 kg
Connection IN
1 1/2"
Connection OUT
1 1/2"
Brand
PPG
Guarantee
10 year tank warranty
Weight
43 kg
Length
760 mm
Width
760 mm
Height
1070 mm
Filter capacity at 50m³/h/m² (backwash capacity)
22.5 m³/h
Filter capacity at 30m³/h/m²
13.5 m³/h
Filter diameter
760mm / 30"
Filter surface
0.45 m²
Sand
275 kg
Gravel
75 kg
AFM Grade 1
168 kg
AFM Grade 2
147 kg
Workload
2.5
Connection IN
2"
Connection OUT
2"
Brand
PPG
Guarantee
10 year tank warranty
Weight
30 kg
Length
640 mm
Width
640 mm
Height
915 mm
Filter capacity at 50m³/h/m² (backwash capacity)
16 m³/h
Filter capacity at 30m³/h/m²
10 m³/h
Filter diameter
640mm / 25"
Filter surface
0.32 m²
Sand
175 kg
Gravel
50 kg
AFM Grade 1
105 kg
AFM Grade 2
84 kg
Workload
2.5
Connection IN
1 1/2"
Connection OUT
1 1/2"
Brand
PPG
Guarantee
10 year tank warranty
Weight
25 kg
Length
520 mm
Width
520 mm
Height
850 mm
Filter capacity at 50m³/h/m² (backwash capacity)
10.5 m³/h
Filter capacity at 30m³/h/m²
6 m³/h
Filter diameter
520mm / 20"
Filter surface
0.21 m²
Sand
100 kg
Gravel
25 kg
AFM Grade 1
63 kg
AFM Grade 2
42 kg
Workload
2.5
Connection IN
1 1/2"
Connection OUT
1 1/2"
Brand
PPG
Guarantee
10 year tank warranty
Weight
55 kg
Length
900 mm
Width
900 mm
Height
1285 mm
Filter capacity at 50m³/h/m² (backwash capacity)
32 m³/h
Filter capacity at 30m³/h/m²
19 m³/h
Filter diameter
900mm / 35"
Filter surface
0.64 m²
Sand
400 kg
Gravel
150 kg
AFM Grade 1
231 kg
AFM Grade 2
126 kg
AFM Grade 3
105 kg
Workload
2.5
Connection IN
2"
Connection OUT
2"
Brand
PPG
Guarantee
10 year tank warranty
Weight
43 kg
Length
760 mm
Width
760 mm
Height
1275 mm
Filter capacity at 50m³/h/m² (backwash capacity)
22.5 m³/h
Filter capacity at 30m³/h/m²
13.5 m³/h
Filter diameter
760mm / 30"
Filter surface
0.45 m²
Sand
275 kg
Gravel
75 kg
AFM Grade 1
168 kg
AFM Grade 2
147 kg
Workload
2.5
Connection IN
2"
Connection OUT
2"
Brand
PPG
Guarantee
10 year tank warranty
Weight
30 kg
Length
640 mm
Width
640 mm
Height
1115 mm
Filter capacity at 50m³/h/m² (backwash capacity)
16 m³/h
Filter capacity at 30m³/h/m²
10 m³/h
Filter diameter
640mm / 25"
Filter surface
0.32 m²
Sand
175 kg
Gravel
50 kg
AFM Grade 1
105 kg
AFM Grade 2
84 kg
Workload
2.5
Connection IN
1 1/2"
Connection OUT
1 1/2"
The Hayward Powerline side mount sand filter is a high-quality solution for filtering the water in your pool or spa. With its durable construction and high-quality materials, this sand filter will provide years of trouble-free use.
The side-mount design allows for easy installation and maintenance, allowing you to spend more time in the water and less time maintaining your filter. The filter features a transparent cover for easy inspection of the filter media and the removable strainer basket for collecting large dirt particles.
The Hayward Powerline side mount sand filter is available in different sizes, so you can choose the right filter for your specific pool or spa. The filter is designed to provide the maximum flow and filtration with minimum pressure drop, resulting in efficient operation and extended life of your pool pump.
With the Hayward Powerline side mount sand filter you are assured of clean and clear water in your pool or spa, while enjoying your time in the water without having to worry about the quality of the water. The filter is easy to operate and maintain, so you can always enjoy a perfect swimming pool experience.
