Build a sturdy and well-insulated foundation for your swimming pool with these high-density polystyrene pool blocks. The 100 x 25 x 30 cm blocks combine a low weight with a hard outer layer and a practical stacking system. This allows you to build the pool walls quickly and systematically, while the polystyrene helps reduce heat loss through the walls. Whether you do the work yourself or work with a pool builder, this construction system provides a practical foundation for a custom-made pool. During construction, the blocks are fitted with steel reinforcement and then filled with concrete. This creates a reinforced concrete structure with a permanent, insulating formwork. Easy to stack and quick to build The construction system uses stackable blocks made of expanded polystyrene, also known as EPS or Styrofoam. The principle is similar to building blocks: you place the blocks layer by layer to build the desired pool wall. Thanks to the 100 cm length, you can make quick progress. For a wall height of 1.50 meters, five layers of 30 cm are required. The low weight makes the blocks easy to move and handle. This is convenient when setting out and building the walls and makes the system attractive to DIY builders. A level foundation, accurate measurements, and correct placement form the basis for a good result. High density for a sturdy wall surface These high-density pool blocks have a PS60/30 construction. The core consists of polystyrene with a density of 30 kg/m³ and is fitted with a hard outer layer with a density of 60 kg/m³. This outer layer makes the surface more resistant to dents, scratches, and deformation during processing. Thus, the block combines the ease of use of lightweight polystyrene with a sturdy surface. The hard outer layer helps keep the wall neat during construction and in preparation for the final pool lining. Concrete and reinforcement provide structural strength The polystyrene blocks form the formwork for the pool wall. During construction, the required steel reinforcement is installed, after which the hollow spaces are filled with concrete. The blocks remain in place after filling and form an insulating layer around the concrete core. The final strength is determined by the entire structure: the subsoil, floor slab, reinforcement, and concrete fill must be coordinated. The dimensions of the pool and any steps or tanning ledges also play a role. The walls are filled according to the system's processing instructions. Insulating properties for heat retention Polystyrene helps limit heat transfer between the pool water and the surrounding soil. As a result, the blocks help retain heat. In a heated pool, this can reduce the energy required to keep the water at the desired temperature. The total energy savings depend on the entire pool construction and its use. In addition to wall insulation, floor insulation, a good pool cover, the outside temperature, and the desired water temperature also have an impact. These pool blocks thus provide a practical foundation for a well-insulated pool. Flexible in shape and layout With the blocks and suitable accessories, you can realize various pool designs. In addition to straight walls, entry steps and tanning ledges are also possible, provided they are properly designed structurally. This allows you to tailor the pool to the available space and your preferences for comfort and use. When designing, also take into account the placement of lighting, return jets, and other wall penetrations. These built-in components are installed during the construction phase so that they are incorporated into the pool wall in the correct position. Step-by-step installation Construction begins with excavating and preparing the construction pit. The floor reinforcement is then installed, and the concrete floor slab is poured and finished to the desired height. This floor slab forms the foundation for the pool walls. The first row of blocks is accurately placed on the prepared floor slab, as prescribed, in a mortar bed. The remaining layers, steel reinforcement, and built-in components follow. The blocks are connected or bonded according to the system's instructions. Once the walls are fully built and inspected, they are filled with concrete. This is followed by preparation for a suitable waterproof pool lining. The blocks and the concrete core form the wall structure; the pool lining provides the waterproof finish. How many blocks and how much concrete do you need? The required quantity depends on the pool size, wall height, corner connections, and any additional elements. For an 8 x 4 x 1.50-meter pool, according to the specified calculation method, you will need approximately 100 blocks and about 4.3 m³ of concrete for the walls. This calculation assumes five layers and a calculated perimeter of 25 meters, including a 1-meter allowance. The indicative concrete consumption is 115 liters per square meter of pool wall. Concrete for the floor slab and additional material for steps or tanning ledges are not included. Order at least 1 to 2 extra blocks for limited cutting waste or potential damage. For a design with many corners or custom dimensions, a larger reserve may be required.

Read more less

Have you built your pool walls with polystyrene building blocks? Then these polystyrene end caps are the perfect solution for neatly closing off the outer sides of the pool. They ensure that the blocks remain firmly in place and create a stable base before you fill the blocks with concrete. The end caps are placed at both the bottom and top of the pool wall ends, contributing to a sturdy construction and a sleek finish. This end cap is suitable for Styropool Small blocks of 100 x 25 cm and offers a durable and lightweight solution for pool construction.With this Polystyrene End Cap - High Density Small you ensure a sturdy, well-insulated, and sleek finish for your pool. Perfect for both professional pool builders and DIY enthusiasts!

Read more less

With the PS40 polystyrene end cap, you seal the open ends of suitable polystyrene pool blocks before filling the walls with concrete. The end cap seals the formwork and helps prevent concrete from leaking out through the ends during filling. The end caps are made of polystyrene, also known as Tempex. This lightweight material is easy to handle and is compatible with the polystyrene pool block construction system. A practical component for preparing the pool walls for concrete pouring. Sealing the open block ends When building the pool walls, open ends may be created that must be sealed before filling with concrete. Place the end caps at the bottom and top of these open ends, as specified for the construction system. The caps seal the ends of the blocks and remain part of the formwork after filling. Check beforehand whether the end cap is suitable for the block type being used to ensure a proper fit. Install before filling with concrete Install the end caps while building the pool walls, before filling the blocks with concrete. Then check that all open ends are sealed and the caps are securely in place. The walls can then be filled according to the construction system's processing instructions. The number of end caps required depends on the pool layout and the number of open block ends. Therefore, include them in your material calculation so that the formwork can be fully prepared for concrete pouring.

Read more less

With the Small High-density Polystyrene pool block, you build the foundation for your own swimming pool step by step. The compact size of 100 x 25 x 25 cm and the low weight make the blocks easy to handle and place. At the same time, the insulating polystyrene helps to limit heat loss through the pool walls. The blocks form a permanent formwork for a reinforced concrete pool wall. During construction, you install steel reinforcement and fill the blocks with concrete. This combines the ease of working with polystyrene with the strength of a concrete structure. A practical solution for DIY builders and pool builders who want to create a custom-made insulated pool. Compact size and easy to work with The Small version has a length of 100 cm, a width of 25 cm and a height of 25 cm. This handy size makes it easy to move the blocks, align them and build them up layer by layer. With each layer, you increase the wall by 25 cm. Six layers are required for a wall height of 1.50 meters. Each block represents a wall surface of 0.25 m², so you need four blocks for one square meter of straight wall. Corner joints, recesses and cutting waste must be calculated separately. Stackable building system with permanent formwork The polystyrene blocks are placed on a prepared foundation and together form the formwork of the pool wall. During construction, the required reinforcement is installed. Once the structure is ready and checked for dimensions and stability, the blocks are filled with concrete according to the system instructions. After filling, the blocks remain in place. Therefore, no temporary formwork of the walls needs to be removed. The polystyrene remains part of the wall construction and provides an insulating layer around the concrete core. A solid foundation with concrete and steel reinforcement The structural strength of the pool wall is created by the combination of concrete, steel reinforcement and a correctly executed foundation. The blocks make it possible to build this concrete wall in an organized manner. The required reinforcement and the execution of the floor slab must match the pool design and the conditions on the construction site. The position of any stairs, tanning ledges and other structural components must also be determined in advance. In this way, the entire pool construction forms a cohesive whole. Insulating walls for less heat loss Expanded polystyrene, also known as EPS or Styrofoam, naturally has insulating properties. The blocks therefore help to limit the heat transfer between the pool water and the surrounding soil. In a heated pool, this can contribute to a lower energy requirement to keep the water at temperature. How much heat the pool retains depends on the complete execution. In addition to wall insulation, factors such as floor insulation, a pool cover, weather conditions and the desired water temperature play a role. The polystyrene pool blocks therefore form part of a well-insulated pool. Room for your pool design The building system is suitable for constructing structural pool walls. With suitable components and a good structural design, elements such as entry stairs and tanning ledges can also be included in the design. During preparation, determine where the lighting, return fittings and other wall penetrations should be placed. These components are incorporated into the walls during the construction phase. By fixing their position in advance, you prevent major adjustments after the concrete has been applied. From foundation to watertight finish The construction begins with excavating and preparing the construction pit. Next, the floor reinforcement and the concrete floor slab are installed according to the construction plan. A flat, correctly executed floor slab forms the basis for accurately placing the first row of blocks. Then the walls are built up layer by layer, including reinforcement and built-in components. The connecting of the blocks and filling them with concrete are done according to the processing instructions of this version. After filling, the walls are prepared for a suitable watertight pool lining. The blocks and the reinforced concrete core form the wall construction; the lining provides the watertight finish and the final appearance of the pool. Calculate the required materials in advance For an initial material estimate, you can assume four blocks per square meter of straight wall. The final quantity depends on the dimensions, corner details, recesses and any additional elements. Therefore, allow for a reserve for cutting waste and damage. The required concrete volume depends on the internal construction of the Small block. Use the product specifications of this version for this purpose. Calculate the concrete for the floor slab, stairs and other components separately, so that you have a complete overview of the required materials.

Read more less

  Build a sturdy and well-insulated foundation for your swimming pool with these high-density polystyrene pool blocks. The 125 x 25 x 30 cm blocks combine a low weight with a hard outer layer and a practical stacking system. This allows you to build the pool walls quickly and systematically, while the polystyrene helps reduce heat loss through the walls. Whether you do the work yourself or collaborate with a pool builder, this construction system provides a practical foundation for a custom-made pool. During construction, the blocks are fitted with steel reinforcement and then filled with concrete. This creates a reinforced concrete structure with a permanent, insulating formwork. Easy to stack and quick to build The construction system uses stackable blocks made of expanded polystyrene, also known as EPS or Tempex. The principle is similar to building blocks: you place the blocks layer by layer to build the desired pool wall. Thanks to the 125 cm length, you can make quick progress. For a wall height of 1.50 meters, five layers of 30 cm are required. The low weight makes the blocks easy to move and handle. This is convenient when setting out and building the walls and makes the system attractive to DIY builders. A level foundation, accurate measurements, and correct placement form the basis for a good result. High density for a sturdy wall surface These high-density pool blocks have a PS60/30 construction. The core consists of polystyrene with a density of 30 kg/m³ and is fitted with a hard outer layer with a density of 60 kg/m³. This outer layer makes the surface more resistant to dents, scratches, and deformation during processing. Thus, the block combines the ease of use of lightweight polystyrene with a sturdy surface. The hard outer layer helps keep the wall neat during construction and preparation for the final pool lining. Concrete and reinforcement provide structural strength The polystyrene blocks form the formwork for the pool wall. During construction, the required steel reinforcement is installed, after which the hollow spaces are filled with concrete. The blocks remain in place after filling and form an insulating layer around the concrete core. The final strength is determined by the entire structure: the subsoil, floor slab, reinforcement, and concrete fill must be coordinated. The dimensions of the pool and any stairs or tanning ledges also play a role. The walls are filled according to the system's processing instructions. Insulating properties for heat retention Polystyrene helps reduce heat transfer between the pool water and the surrounding soil. As a result, the blocks help retain heat. In a heated pool, this can reduce the energy required to keep the water at the desired temperature. The total energy savings depend on the entire pool construction and its use. In addition to wall insulation, the pool floor insulation, a good pool cover, the outdoor temperature, and the desired water temperature also have an impact. These pool blocks thus provide a practical foundation for a well-insulated pool. Flexible in shape and layout With the blocks and suitable accessories, you can realize various pool designs. In addition to straight walls, entry stairs and tanning ledges are also possible, provided they are properly designed structurally. This allows you to tailor the pool to the available space and your preferences for comfort and use. When designing, also take into account the placement of lighting, return jets, and other wall penetrations. These built-in components are installed during the construction phase so that they are incorporated into the pool wall in the correct position. Step-by-step installation Construction begins with excavating and preparing the construction pit. The floor reinforcement is then installed, and the concrete floor slab is poured and finished to the desired height. This floor slab forms the foundation for the pool walls. The first row of blocks is accurately placed on the prepared floor slab, as prescribed, in a mortar bed. The remaining layers, steel reinforcement, and built-in components follow. The blocks are connected or bonded according to the system's instructions. Once the walls are fully built and inspected, they are filled with concrete. This is followed by preparation for a suitable waterproof pool lining. The blocks and the concrete core form the wall structure; the pool lining provides the waterproof finish. How many blocks and how much concrete do you need? The required quantity depends on the pool dimensions, wall height, corner joints, and any additional elements. For an 8 x 4 x 1.50-meter pool, according to the provided calculation method, you will need approximately 100 blocks and about 4.3 m³ of concrete for the walls. This calculation assumes five layers and a calculated perimeter of 25 meters, including a 1-meter allowance. The indicative concrete consumption is 115 liters per square meter of pool wall. Concrete for the floor slab and additional material for stairs or tanning ledges are not included. Order at least 1 to 2 extra blocks for limited cutting waste or potential damage. For a design with many corners or custom dimensions, a larger reserve may be required.

Read more less

Are you planning to build your own swimming pool, but don't know where to start? Look no further! This High Density polystyrene DIY kit is the ultimate solution for anyone dreaming of their own pool. With this complete kit, you can easily build an in-ground pool measuring 6 x 3 meters with a depth of 1.5 meters. The kit contains everything you need, from the High Density building blocks to all essential accessories for a solid and durable swimming pool. Thanks to the PS60 polystyrene blocks, known for their excellent density and insulation, you will lay the foundation for the pool of your dreams in no time! Supplied as a Complete Construction Kit This DIY swimming pool kit offers more than just building blocks. It includes everything you need to create a beautiful in-ground pool in your garden! From skimmers to pool ladders, floor and wall felt, inlets, and much more: you don't have to worry about which parts you need. Everything is included in the package, so you can get started worry-free. Extra Sturdy and Durable Thanks to High Density The PS60 High Density building blocks in this kit are of exceptional quality. They are sturdier than standard building blocks, thanks to their high density and hard outer layer. This makes them extra resistant to pressure and stress, minimizing the chance of dents. Moreover, the blocks are lightweight, which makes the work easier. But that's not all: the high density also provides an excellent insulation value, making it easier to maintain the temperature of your pool. This means more swimming pleasure and fewer worries! What is Included in the Standard Kit? This construction kit is fully equipped with everything you need for the construction of your pool. Please note that you will need some extra tools, such as a drill, for the construction. 80 High Density polystyrene building blocks PS60 40 polystyrene end caps PS60 Floor and wall felt Pool liner Hung profile for securing the liner 1 wide-mouth skimmer 2 inlets 1 vacuum connection Powerful sand filter set including required filter glass Stainless steel pool ladder with 4 steps All necessary mounting materials and glue Fully Customizable to Your Own Wishes This construction kit provides the perfect foundation for the pool of your dreams, but you can expand it entirely to your own liking. Want to take it a step further? Add coping stones, lighting, heating, disinfection, covers, and cleaning products for a complete pool experience. Our product experts are ready to advise you from A to Z, ensuring you get the perfect pool in your garden. Don't hesitate and contact us to start your ultimate pool project!

Read more less

With the High Density XXL polystyrene pool block, you can quickly and clearly build the walls of your pool. Thanks to the generous size of 125 x 25 x 50 cm, each block covers a large wall area. The height of 50 cm means that you can achieve a wall height of 1.50 meters with just three layers. The blocks combine the low weight and insulating properties of polystyrene with a construction system that is filled with reinforced concrete. This creates a sturdy pool wall with a permanent, insulating formwork. A practical choice for DIY builders and pool builders who want to efficiently build larger wall areas. Large size for quick wall construction The XXL version has a length of 125 cm, a width of 25 cm, and a height of 50 cm. Each block therefore represents a wall area of 0.625 m². Due to these large dimensions, fewer blocks and layers are needed than with smaller versions. For a wall height of 1.50 meters, you place three layers. This limits the number of individual placement steps. The larger size does require sufficient working space and careful alignment, so that the walls are built straight and to the correct dimensions. Lightweight and insulating polystyrene The blocks are made of expanded polystyrene, also known as EPS or Styrofoam. This material is light and therefore easy to move during construction. Despite the large size, the blocks remain easy to handle before they are filled with concrete. Polystyrene naturally has insulating properties. The blocks help to limit heat transfer between the pool water and the surrounding soil. In a heated pool, this can help reduce the energy required to keep the water at temperature. The final heat savings depend on the complete pool. Soil insulation, a good cover, the desired water temperature, and the weather conditions also affect heat loss. Permanent formwork for a concrete pool wall The construction system works with blocks that are built up layer by layer. During construction, the required steel reinforcement is installed. Then, according to the processing instructions, the blocks are filled with concrete. The concrete core forms the load-bearing pool wall together with the reinforcement. The polystyrene blocks remain in place as insulating formwork. Therefore, no temporary wall formwork needs to be removed after filling. A good foundation, suitable reinforcement, and correct concrete processing are essential for the final construction. Coordinate these components with the pool size, design, and conditions on the construction site. Options for a custom-made pool With the XXL blocks, you build the walls of a structural pool. With suitable components and a good structural design, entry stairs and shallow areas can also become part of the design. Due to the block height of 50 cm, this version is particularly practical for wall heights that are multiples of this. For non-standard heights or smaller details, additional custom work may be required. Check in advance which accessories or additional block sizes fit this system. When designing, also take into account pool lighting, sprayers, and wall penetrations. These components are installed during the construction phase, before the walls are filled with concrete. From a prepared construction pit to a finished wall Construction begins with excavating and preparing the construction pit. Then, the floor reinforcement and the concrete floor slab are installed according to the construction plan. A flat, correctly executed floor slab forms the basis for placing the first row of blocks. Then, the walls are built up and provided with reinforcement and built-in components. During these works, the dimensions, alignment, and stability are checked. The connecting, supporting, and filling of the blocks are done according to the instructions for the XXL version. The block height of 50 cm does not automatically determine how much concrete can be poured at once. After filling, the walls are prepared for a suitable waterproof pool liner. The blocks and the reinforced concrete form the structure; the liner provides the waterproof finish and the final appearance. Calculate the required quantity in advance Each XXL block has a wall area of 0.625 m². For an initial estimate, divide the calculated wall area by 0.625. This amounts to an average of 1.6 blocks per square meter of straight wall. The final order depends on the dimensions, corner connections, recesses, and any stairs or shallow areas. Round up to whole blocks and allow for extra material for cutting waste and damage. The required concrete volume depends on the internal block construction. Therefore, use the specified concrete consumption for this specific XXL version. Concrete for the floor slab and additional structures should be calculated separately.

Read more less

Are you planning to build a swimming pool yourself, but don't know where to start? Look no further! This High Density polystyrene DIY kit is the perfect solution for anyone dreaming of their own swimming pool. With this complete kit, you can easily build an inground pool measuring 10.00 x 5.00 meters with a depth of 1.5 meters. The package contains everything you need, from the High Density building blocks to all the essential accessories for a solid and durable swimming pool. Thanks to the PS60 polystyrene blocks, known for their excellent density and insulation, you will lay the foundation for the pool of your dreams in no time! Supplied as a Complete DIY Kit This swimming pool DIY kit offers more than just building blocks. It contains everything you need to realize a beautiful inground pool in your garden! From skimmers to pool ladders, floor and wall felt, inlets, and much more: you don't have to worry about which parts you need. Everything is included in the package so that you can get started worry-free. Extra Sturdy and Durable Thanks to High Density The PS60 High Density building blocks in this kit are of exceptional quality. They are sturdier than standard building blocks, thanks to their high density and hard outer layer. This makes them extra resistant to pressure and load, minimizing the risk of dents. Furthermore, the blocks are lightweight, which makes the work easier. But that's not all: the high density also ensures an excellent insulation value, making it easier to maintain the temperature of your pool. This means more swimming fun and fewer worries! What Is Included in the Standard Package? This DIY kit is fully equipped with everything you need for the construction of your swimming pool. Please note that you will need some additional tools for the construction, such as a drill. 128 High Density polystyrene building blocks PS60 40 polystyrene end caps PS60 Pool liner Hung profile for securing the liner 2 skimmers 4 inlets 1 vacuum connection Powerful sand filter set including necessary filter glass Stainless steel pool ladder with 4 steps All necessary mounting materials Fully Customizable to Your Own Wishes This DIY kit provides the perfect base for the pool of your dreams, but you can expand it entirely according to your own wishes. Want to take it a step further? Add coping stones, lighting, heating, disinfection, covers, and cleaning products for a complete swimming experience. Our product experts are ready to advise you from A to Z, ensuring you get the perfect pool in your garden. Do not hesitate and contact us to start your ultimate swimming pool project!

Read more less

Are you planning to build your own swimming pool, but don't know where to start? Look no further! This High Density polystyrene DIY kit is the ultimate solution for anyone dreaming of their own swimming pool. With this complete kit, you can easily build an inground pool measuring 7.00 x 3.50 meters with a depth of 1.5 meters. The kit contains everything you need, from the High Density building blocks to all the essential accessories for a solid and durable swimming pool. Thanks to the PS60 polystyrene blocks, known for their excellent density and insulation, you will lay the foundation for the pool of your dreams in no time! Supplied as a Complete Construction Kit This DIY swimming pool kit offers more than just building blocks. It includes everything you need to create a beautiful inground pool in your garden! From skimmers to pool ladders, floor and wall felt, inlets, and much more: you don't have to worry about which parts you need. Everything is included in the package, so you can get started without a care. Extra Sturdy and Durable Thanks to High Density The PS60 High Density building blocks in this kit are of exceptional quality. They are sturdier than standard building blocks thanks to their high density and hard outer layer. This makes them extra resistant to pressure and load, minimizing the risk of dents. Furthermore, the blocks are lightweight, which makes the work easier. But that's not all: the high density also ensures excellent insulation value, making it easier to maintain the temperature of your pool. This means more swimming fun and fewer worries! What is Included in the Kit as Standard? This construction kit is fully equipped with everything you need to build your pool. Please note that you will still need some additional tools, such as a drill, for construction. 88 High Density polystyrene building blocks PS60 40 polystyrene end caps PS60 Pool liner Hung profile for securing the liner 1 suction skimmer 2 inlets 1 vacuum connection Powerful sand filter set including necessary filter glass Stainless steel pool ladder with 4 steps All necessary mounting materials Fully Customizable to Your Own Wishes This construction kit offers the perfect foundation for the pool of your dreams, but you can expand it entirely according to your own wishes. Want to take it a step further? Add coping stones, lighting, heating, disinfection, covers, and cleaning products for a complete pool experience. Our product experts are ready to advise you from A to Z so that you get the perfect pool in your garden. Do not hesitate to contact us to start your ultimate pool project!

Read more less

Are you planning to build a swimming pool yourself, but don't know where to start? Look no further! This High Density polystyrene self-build kit is the solution for anyone dreaming of their own pool. With this complete package, you can easily build an in-ground swimming pool measuring 8 x 4 meters with a depth of 1.5 meters. The package contains everything you need, from the High Density building blocks to all the essential accessories for a solid and durable pool. Thanks to the PS60 polystyrene blocks, known for their excellent density and insulation, you can lay the foundation for the pool of your dreams in no time! Supplied as a Complete Construction Kit This pool self-build kit offers more than just building blocks. It contains everything you need to realize a beautiful in-ground pool in your garden! From skimmers to pool ladders, floor and wall felt, inlets, and much more: you don't have to worry about which parts you need. Everything is in the package, so you can get to work without a care. Extra Sturdy and Durable Thanks to High Density The PS60 High Density building blocks in this package are of exceptional quality. They are sturdier than standard building blocks, thanks to their high density and hard outer layer. This makes them extra resistant to pressure and stress, keeping the risk of dents to a minimum. Moreover, the blocks are lightweight, which makes the work easier. But that's not all: the high density also ensures excellent insulation value, making it easier to maintain the temperature of your pool. This means more swimming fun and fewer worries! What is Included in the Standard Package? This construction kit is fully equipped with everything you need for the construction of your pool. Please note that you will need some extra tools, such as a drill, for the construction. 104 High Density polystyrene building blocks PS60 40 polystyrene end caps PS60 Pool liner Hung profile for attaching the liner 2 suction skimmers 4 inlets 1 vacuum connection Powerful sand filter set including necessary filter glass Stainless steel pool ladder with 4 steps All necessary mounting materials Fully Customizable to Your Own Wishes This construction kit offers the perfect foundation for the pool of your dreams, but you can expand it entirely according to your own wishes. Want to go a step further? Add edge tiles, lighting, heating, disinfection, covers, and cleaning products for a complete pool experience. Our product experts are ready to advise you from A to Z, so that you get the perfect pool in your garden. Do not hesitate and contact us to start your ultimate pool project!

Read more less

Are you planning to build your own swimming pool? Then this block set is perfect for you! You will receive a complete set of building blocks and end caps. This allows you to easily install a super-strong, in-ground swimming pool measuring 10 by 5 meters with a depth of 1.5 meters in your garden. Furthermore, these blocks are made of PS60 polystyrene, giving them excellent density and providing top-notch insulation. Because of our years of experience and confidence in these blocks, we offer a lifetime warranty! Quick and easy to build The great advantage of polystyrene blocks is that they are very lightweight yet super strong. This makes them easy to use and helps keep your back safe during the construction of your in-ground pool. The building blocks have a special rectangular shape that allows you to slide them together easily. You can compare it to Lego! Whether it's entry stairs, standing ledges, or walls, you can create it all with these polystyrene building blocks. Once the entire frame is in place, you fill it with concrete, giving you a mega-strong foundation for your pool! Extra sturdy due to high density High-density blocks have a very high density. The PS60 is of higher quality than standard building blocks, ensuring that the High Density blocks are even sturdier. In addition, the High Density polystyrene blocks have a hard outer layer. Due to this combination, the blocks are extra resistant to pressure and load, and the chance of dents is very small. But it doesn't stop there! Because of the high density, the insulation value of the blocks is also much better. This makes it much easier for you to maintain your pool's temperature! What is included in the standard package? This base package only includes the blocks and end caps for the walls of your in-ground swimming pool. Below you can read exactly what will be delivered to your home. 124 High Density polystyrene building blocks PS60 40 polystyrene end caps PS60 Please note! A set of building blocks alone is not enough. More is needed to realize your dream pool. Therefore, please inquire about the possibilities! Fully customizable to your own wishes This block set can be fully expanded according to your own wishes. We always recommend adding fasteners, floor and wall felt lining, built-in parts, stairs, and filter technology to this package. This gives you everything you need to assemble your unique swimming pool right away. And hey, why stop there? Go a step further and complete your pool experience by also adding edge tiles, lighting, heating, disinfection, covers, and cleaning products. Contact our product experts, who will advise you from A to Z so that you get the perfect swimming pool in your garden!

Read more less

Are you planning to build a swimming pool yourself? Then this block set is perfect for you! You will receive a complete set of building blocks and end caps. This allows you to easily install a super-strong built-in swimming pool measuring 8 by 4 meters with a depth of 1.5 meters in your garden. Furthermore, these blocks are made of PS60 polystyrene, which gives them an extremely high density and provides top-notch insulation. Due to our years of experience and confidence in these blocks, we offer a lifetime warranty! Quick and easy to build The great advantage of polystyrene blocks is that they are very lightweight yet super strong. This ensures they are easy to use and helps you avoid back strain while installing your built-in pool. The building blocks have a special rectangular shape and slide together very conveniently. You can compare it to Lego! Entry stairs, resting ledges, and walls—you can make it all with these polystyrene building blocks. Once the entire frame is set up, you fill it with concrete, giving you an incredibly strong base for your pool! Extra sturdy due to high density High-density blocks have a very high density. The PS60 is of higher quality than standard building blocks, making the High-Density blocks even sturdier. Additionally, the High-Density polystyrene blocks have a hard outer layer. Due to this combination, the blocks are extra resistant to pressure and load, and the risk of dents is very small. But it doesn't stop there! Because of the high density, the insulation value of the blocks is also much better, making it much easier for you to maintain the temperature of your pool! What is included in the standard package? This basic package only includes the blocks and end caps for the walls of your built-in pool. Below, you can read exactly what will be delivered to your home. 104 High-Density polystyrene building blocks PS60 40 polystyrene end caps PS60 Please note! A set of building blocks alone is not enough. More is required to realize your dream pool. Therefore, please inquire about the possibilities! Fully customizable to your own wishes This block set can be fully expanded according to your own wishes. We always recommend adding fastening materials, floor and wall felt lining, installation parts, stairs, and filter technology to this package. This ensures you have everything you need to assemble your unique swimming pool right away. And hey, why stop there? Go a step further and complete your pool experience by also adding coping stones, lighting, heating, disinfection, covers, and cleaning products. Contact our product experts, who will advise you from A to Z so that you get the perfect pool in your garden!

Read more less

Are you planning to build a swimming pool yourself? Then this block set is perfect for you! You will receive a complete set of building blocks and end caps. This allows you to easily install a super-strong in-ground swimming pool measuring 7 by 3.5 meters and 1.5 meters deep in your garden. Furthermore, these blocks are made of PS60 polystyrene, giving them an incredibly high density and providing top-notch insulation. Thanks to our many years of experience and confidence in these blocks, we offer a lifetime warranty! Quick and easy to assemble The great advantage of polystyrene blocks is that they are very lightweight yet super strong. This makes them easy to use, saving your back during the construction of your in-ground pool. The building blocks have a special rectangular shape and slide together very conveniently. You can compare it to Lego! Entry stairs, standing ledges, and walls—you can make it all with these polystyrene building blocks. Once the entire frame is set up, you fill it with concrete, giving you an ultra-strong foundation for your pool! Extra sturdy thanks to high density High-density blocks have a very high density. The PS60 is of higher quality than standard building blocks, ensuring that the High-Density blocks are even sturdier. Additionally, the High-Density polystyrene blocks have a hard outer layer. Because of this combination, the blocks are extra resistant to pressure and load, and the chance of dents is very small. But it doesn't stop there! Due to the high density, the insulation value of the blocks is also much better. This makes it much easier for you to maintain your pool's temperature! What comes standard in the package? This basic package only contains the blocks and end caps for the walls of your in-ground swimming pool. Below you can read exactly what will be delivered to your home. 88 High-Density polystyrene building blocks PS60 40 polystyrene end caps PS60 Please note! A set of building blocks alone is not enough. More is needed to realize your dream pool. Therefore, please inquire about the possibilities! Fully customizable to your own wishes This block set can be fully expanded according to your own wishes. We always recommend adding fastening materials, floor and wall felt lining, built-in parts, stairs, and filter technology to this package. This way, you immediately have everything at home to assemble your unique swimming pool. And hey, why stop there? Go a step further and complete your pool experience by also adding edge tiles, lighting, heating, disinfection, covers, and cleaning products. Contact our product experts, who will advise you from A to Z so that you get the perfect swimming pool in your garden!

Read more less

Are you planning to build your own swimming pool? Then this block set is perfect for you! You will receive a complete set of building blocks and end caps. This allows you to easily install a super-strong in-ground swimming pool measuring 6 by 3 meters and 1.5 meters deep in your garden. Furthermore, these blocks are made of PS60 polystyrene, giving them an incredibly high density and offering excellent insulation. Thanks to our years of experience and confidence in these blocks, we offer a lifetime warranty! Quick and easy to build The great advantage of polystyrene blocks is that they are very lightweight yet super strong. This ensures they are easy to use and helps you save your back while installing your in-ground swimming pool. The building blocks have a special rectangular shape and can be easily slotted together. You can compare it to Lego! Entry stairs, ledges, and walls—you can make it all with these polystyrene building blocks. Once the entire frame is set up, you fill it with concrete, providing a super-strong foundation for your pool! Extra sturdy thanks to high density High-density blocks have a very high density. The PS60 is of higher quality than standard building blocks, making the High-Density blocks even sturdier. In addition, the High-Density polystyrene blocks have a hard outer layer. This combination makes the blocks extra resistant to pressure and load, and the chance of dents is very small. But it doesn't stop there! Due to the high density, the insulation value of the blocks is also much better. This makes it much easier for you to maintain the temperature of your pool! What is included in the package as standard? This basic package only includes the blocks and end caps for the walls of your in-ground swimming pool. Below, you can read exactly what will be delivered to your home. 80 High-Density polystyrene building blocks PS60 40 polystyrene end caps PS60 Please note! A set of building blocks alone is not enough. More is needed to realize your dream pool. Therefore, please inquire about the possibilities! Fully customizable to your own wishes This block set can be fully expanded according to your own wishes. For instance, we always recommend adding mounting materials, floor and wall felt lining, built-in parts, a staircase, and filter technology to this package. This gives you everything you need right away to assemble your unique swimming pool. And hey, why stop there? Go a step further and complete your pool experience by also adding coping stones, lighting, heating, disinfection, covers, and cleaning products. Contact our product experts; they will advise you from A to Z so that you get the perfect swimming pool in your garden!

Read more less