The Universal Bypass Kit for heat pumps is the ideal solution for an optimal installation of your swimming pool heat pump. Heat pumps require a specific flow rate and pressure to achieve their maximum efficiency. With this complete bypass kit, you can easily regulate the water pressure and flow passing through the heat pump. This allows you to reduce energy consumption and increase the efficiency of your heat pump.
The kit contains everything you need for a correct installation, including sufficient PVC pipes and pool hoses. This makes connecting the heat pump quick and problem-free. Thanks to this universal kit, you are fully prepared to ensure your heat pump functions optimally.
Set contents:
1x PVC glue
1x PVC cleaner (125 ml)
2x Pool hose (38 mm, 1.5 meters each)
2x PVC elbow (50 mm)
2x PVC T-piece (50 mm)
3x PVC ball valve (50 mm)
6x PVC pipe (50 mm, 10 cm)
6x Stainless steel hose clamp (32 x 44 mm)
6x Hose barb (50 x 38/32 mm)
With this universal bypass kit, you are assured of an effective and user-friendly installation for your heat pump, helping you save energy and keep your pool performance optimal.
This Bypass kit is a must-have for the optimal functioning of your swimming pool heat pump. A heat pump requires specific water pressure and flow to operate efficiently. Without proper bypass control, the flow through the heat pump can be too high or too low, which negatively impacts performance and may even cause damage to the installation. With this Bypass kit, you can precisely regulate the water flow, extending the lifespan of the heat pump and minimizing energy consumption. This results in better efficiency and lower energy costs.
How does a bypass kit work? A bypass kit acts as a regulator between the filtration system and the heat pump. It allows you to adjust the amount of water flowing through the heat pump, depending on pressure and temperature requirements. This is especially useful when the heat pump receives too much or too little water, which can lead to inefficient heating or even technical problems.
Package contents:
1x N-30 PVC glue 125ml: For firmly and watertight bonding of the components.
1x Griffon Cleaner 125ml: For cleaning and degreasing PVC pipes and couplings for optimal adhesion.
2x PVC T-piece 50 mm 16bar: To effectively connect the pipes to the heat pump and the filtration system.
3x PVC ball valve 50 mm 16bar: For precise control of the water flow.
4x PVC pipe 50 mm 10cm 10bar: Pipe sections for connecting the components.
4x Stainless steel hose clamp 32 x 44 mm: For secure attachment of the pipes.
4x ABS hose tail 50 x 32 mm: For a sturdy connection between the pipes and the heat pump.
With the Bypass Kit for Heat Pump - Basic, you ensure that your heat pump performs optimally, allowing you to enjoy efficiently and effectively heated swimming pool water all season long!
The Poolex Kit ByPass Spawer is the ideal solution for efficiently connecting a heat pump to your spa or swimming pool. Whether you have a heat pump specifically designed for a spa, or you are using a spa heat pump in combination with your swimming pool, this bypass kit is perfectly suited to ensure your heating system functions optimally.
With this complete set, you can regulate the water flow to the heat pump, allowing you to accurately control the temperature without disrupting the water circulation in the entire system. This is essential for ensuring the efficiency and longevity of your heat pump.
Set contents:
2 x 90° T-Piece adapter (⌀50x32) – For connecting and diverting water at corners.
2 x PVC socket (⌀50) – Ensures a secure connection of the pipes.
2 x PVC socket (⌀32) – For smaller pipes.
4 x Flexible hose (⌀32 / 1 meter) – Flexible hoses for easy installation, even in hard-to-reach areas.
2 x Valve (⌀32) – For regulating the water flow and bypassing the heat pump.
2 x End cap (25x32x1", mixed) – For sealing off the piping.
PVC glue (250 mL) – For securely fastening the PVC connections.
PVC cleaner (250 mL) – For cleaning and preparing the PVC pipes before applying the glue.
Teflon tape (12 mm x 12 m) – For sealing threaded connections and preventing leaks.
With the Poolex Kit ByPass Spawer, you ensure a durable, reliable, and efficient installation of your spa or pool heat pump, leading to better performance and a longer lifespan for your heating system.
The stainless steel hose clamp (32 x 44 mm) is a durable and reliable solution for securely attaching hoses to connections such as pipes, fittings, or nipples. Thanks to its robust design and the use of stainless steel, this hose clamp is corrosion-resistant, making it ideal for applications in humid environments, such as garden irrigation, automotive, industry, and shipping. The adjustable diameter makes it possible to securely fasten various hose sizes.
The Kokido bypass kit for heat pumps is an essential accessory for correctly connecting and ensuring the optimal operation of your pool heat pump or solar heating system. With this complete set, you can easily create a bypass in the piping, allowing you to precisely regulate the water flow.
A bypass allows you to determine exactly how much water flows through the heat pump. This is essential for good efficiency and prevents damage caused by flow rates that are too high or too low. In addition, the bypass makes it possible to temporarily shut off the heat pump without shutting down the entire system, for example during maintenance or malfunctions.
The set is suitable for almost all above-ground pools and is compatible with most heat pumps and solar heating systems. Thanks to the included couplings and hoses, installation is quick and easy.
In short, this bypass kit ensures more efficient operation, a longer lifespan for your equipment, and maximum control over your pool heating.
With the Deluxe Bypass Kit for heat pumps, you can connect a swimming pool heat pump to your existing filter system professionally and safely. Thanks to the three high-quality PVC ball valves, you can easily regulate the amount of water flowing through the heat pump. This allows you to achieve maximum efficiency from your heat pump and completely shut it off for maintenance or the winter season if necessary.
This complete bypass kit is composed of durable PN16 PVC fittings, high-quality Griffon PVC Cleaner and Griffon WDF-05 PVC cement, stainless steel hose clamps, and hose connectors for 32 mm and 38 mm pool hoses. This makes the kit suitable for virtually all above-ground pools and many permanent pool installations with flexible pool hoses.
Optimal flow for maximum performance
A heat pump works most efficiently when the correct amount of water flows through the heat exchanger. You can precisely adjust the water flow using the three ball valves. This allows the pool to heat up faster, makes the heat pump operate more efficiently, and extends the lifespan of the installation.
Complete installation kit
This deluxe bypass kit contains all the essential parts to build a professional bypass. The PVC pipe sections, T-pieces, elbows, hose nozzles, and stainless steel hose clamps form a sturdy and leak-free installation. With the included Griffon PVC Cleaner and Griffon WDF-05 PVC cement, you also ensure a strong and durable bond for all PVC connections.
Suitable for 32 mm and 38 mm pool hoses
The included hose nozzles are suitable for both 32 mm and 38 mm pool hoses, allowing the bypass kit to be used with many different filter installations and heat pumps. The two included 2-meter pool hoses provide sufficient flexibility for a neat connection.
High-quality materials
All PVC parts are made in PN16 quality, suitable for high working pressures and long-term use. The stainless steel hose clamps ensure a secure attachment of the pool hoses and are resistant to moisture and pool chemicals.
Suitable for
Swimming pool heat pumps
Above-ground pools
In-ground pools
Sand filter pumps
Filter installations with 32 mm or 38 mm pool hoses
New installations and replacement of existing bypass systems
Contents of the set
2x Pool hose 38 mm – 2 meters – White
6x PVC Hose nozzle PN16 – 50 x 38/32 mm
6x Hose clamp 32-50 mm
6x PVC pipe section PN16 50 x 100 mm
3x PVC Ball valve PN16 – 50 mm
2x PVC T-piece 90° PN16 – 50 mm
2x PVC Elbow 90° PN16 – 50 mm
1x Griffon PVC Cleaner – 250 ml
1x Griffon WDF-05 PVC cement – 250 ml
With the Luxury Bypass Kit for heat pumps, you can connect your swimming pool heat pump to the existing filter system quickly, safely, and professionally. Thanks to the three high-quality PN16 PVC ball valves, you can easily regulate the water flow through the heat pump. This ensures the heat pump always operates with the ideal water flow, resulting in higher efficiency, lower energy consumption, and a longer service life for the system.
This complete bypass kit contains all the essential parts to build a durable and leak-free bypass. The kit is suitable for almost all swimming pool heat pumps and filter systems that use 32 mm or 38 mm pool hoses. Thanks to the universal hose tails and sturdy stainless steel hose clamps, installation is simple and reliable.
Optimal water regulation
A swimming pool heat pump only delivers optimal performance when the correct amount of water flows through the heat exchanger. With the three integrated PVC ball valves, you can precisely adjust the flow rate. You can also shut off the heat pump completely without turning off the rest of the filter system. This is ideal during maintenance, repairs, or when the heat pump is taken out of service for the winter.
Complete installation
The bypass kit is composed of durable PN16 PVC pressure fittings, which are resistant to pool chemicals, UV radiation, and long-term use. The included Griffon PVC Cleaner cleans and degreases the connections for optimal adhesion, while the N-30 PVC Glue ensures a strong, watertight, and durable bond.
With the universal hose tails, you can easily connect both 32 mm and 38 mm pool hoses. The stainless steel hose clamps ensure a secure attachment and prevent leaks.
Suitable for
Swimming pool heat pumps
Above-ground pools
In-ground pools
Sand filter pumps
Cartridge filters with pool hoses
New installations
Replacing existing bypass systems
Contents of the set
4x PVC Hose tail PN16 – 50 x 38/32 mm
4x Hose clamp 32-50 mm
4x PVC pipe section PN16 50 x 100 mm
3x PVC Ball valve PN16 – 50 mm
2x PVC T-piece 90° PN16 – 50 mm
1x Griffon PVC Cleaner – 250 ml
1x N-30 PVC Glue – 125 ml
Solar heating bypass kit. Recommended for use with Keops solar pool heaters for above-ground pools. Allows bypassing of solar heaters when not in use.
Includes:
Bypass valve
"T"-connector
Pressure gauge 32/38 mm threaded connectors
180 cm flexible hose (38 mm)
Stainless steel hose clamps
Teflon tape
To regulate the water flow through the hoses, we recommend ordering a bypass kit with this. The valves allow you to easily control the water flow. For example, you can close the valve in the evening so the water goes directly back into the pool, and when adding chemicals, you can open the valve fully for the best flow. You can also use this to influence the heating and cooling of the water.
Suitable for connection to the Solar heater dome 5 liters and the Solar heater dome pro 9 liters
