The LX H30-R1 spa heater 3 kW - 1.5 inch is a high-quality and reliable spa heater that ensures optimal heating of the water in your spa. This heater is widely used in spas originating from China and is a popular choice due to its efficient performance and easy installation. The LX H30-R1 is designed with a power output of 3 kW, which means it heats your spa water quickly and effectively. This heater is equipped with flow protection, ensuring it only operates when there is sufficient water flow, which provides safety and energy savings.
Capacity and Consumption
The LX H30-R1 3 kW heater has a power output of 3.0 kW, which is sufficient to effectively heat the water in your spa, even with intensive use. The heater supports a maximum flow rate of 400 liters per minute, making it suitable for spas of various sizes. This power ensures the water heats up quickly, so you are always ready for a relaxing spa experience. The heater operates on a standard 230V connection and consumes 13.6 amps, ensuring efficient energy management without unnecessary waste.
Usage and Installation
Installing the LX H30-R1 3 kW heater is simple thanks to the standard 1.5-inch connection. This makes the heater compatible with most spa systems without requiring additional modifications to the piping. If your spa connection is different, you can easily use a coupling to make the heater fit. The heater has compact dimensions of 29 x 16 x 5 cm (length x height x width), allowing it to fit easily into most spa enclosures. Installation can be carried out safely and quickly by closing the valves so that no water flows through the heater. Always ensure the spa is turned off while installing or replacing the heater.
Features of the LX H30-R1 3 kW
The LX H30-R1 3 kW is equipped with important safety features, such as flow protection, which ensures the heater only works when there is sufficient water flow. This prevents overheating and unnecessary energy consumption. In addition, the heater is CE and TÜV certified, meaning it meets all major European safety and quality requirements. The heater is made of stainless steel, which ensures a long service life and corrosion resistance.With the LX H30-R1 3 kW spa heater, you ensure your spa is always at the right temperature, with efficient and reliable performance designed to last. This heater is an excellent choice for both new spas and as a replacement for existing heaters.
The LX LP200 Spa Massage Pump 2.5 HP - 1 Speed is a powerful and reliable solution for powering the jets in your spa. This pump is ideal for spas originating from China, but can also be used for other spas thanks to the universal standard 2-inch connection. The unique design ensures that the pump produces a low noise level, so you can enjoy your spa in peace, without disturbing noises. The 2.5 HP version is powerful enough to pump water through your spa's jets quickly and efficiently, allowing you to enjoy an invigorating massage. This model operates at a single speed, making it easy to operate.
Capacity and consumption LX 2.5 HP - 1 Speed
The LX 2.5 HP - 1 Speed massage pump has an output of 2.5 HP, which is equivalent to an energy consumption of 2.2 kW at full power. This powerful pump can pump up to 635 liters per minute through your spa, ensuring that water circulates quickly and efficiently through the jets for an optimal massage experience.
Use and installation LX 2.5 HP - 1 Speed
The installation of the LX LP200 is simple and requires no additional materials. The only thing you need to watch out for is that the connections match your current spa plumbing. The pump comes standard with a 2-inch connection, meaning it can almost always be mounted directly in most spas. Do you have a different connection? Then you can use a coupling to connect the pump. The dimensions of this pump are 40 x 20.5 x 20.5 cm, meaning it fits in most spas without the need for major adjustments.
Please note: No standard coupling is included with this pump. Ensure you have the correct connections, or use a coupling to make the pump fit your spa.
Safety during installation
Before installing the pump, ensure that the spa is turned off and the water valves are closed so that no water flows through the pump during installation. A little water may come out when you disconnect the pump, so be prepared for this. Always read the manual carefully before installing the pump to ensure that you connect everything correctly.
This LX LP200 2.5 HP - 1 Speed massage pump is the ideal choice for spa owners looking for a powerful, quiet, and reliable pump suitable for intensive use.
The LX LP300 Spa massage pump 3 HP - 1 Speed is a high-quality, powerful pump designed to efficiently pump water through your spa jets and provide an ultimate massage experience. This pump is ideal for both smaller and larger spas and is widely used in Chinese spas due to its reliability and performance.
Thanks to its robust design and the application of modern technology, the LX LP300 delivers a constant water flow with a low noise level. This makes the pump very suitable for spa owners who are looking for a quiet yet powerful solution. With an output of 3 HP and a maximum capacity of 635 liters per minute, this pump offers impressive performance, even during intensive use.
The LX 3 HP - 1 Speed is a single-speed massage pump, meaning it operates at one constant speed, which ensures stable water pressure. It is designed to fit most spas effortlessly thanks to the standard 2-inch connection, meaning that in many cases you can replace it 1-to-1 without modifications to the piping. This makes installation simple and fast.
Capacity and Consumption
This pump has an output of 3.0 HP and consumes 2.2 kW at full power. With a maximum capacity of 635 liters per minute, the pump provides a powerful and constant water flow through the spa jets, ensuring a deep and relaxing massage experience.
Installation and Use
The LX 3 HP - 1 Speed is easy to install and requires no additional materials if the connections match those of your current spa pump. The dimensions of the pump are 40 x 20.5 x 20.5 cm (length x height x width), making it compact enough for most installations. If your spa has a different connection, you can easily use an adapter.
When replacing the pump, ensure that you switch off the spa and close the valves to prevent water loss. Although a little water may always escape when you disconnect the pump, the installation is otherwise problem-free. Always follow the instructions in the manual for a safe installation.
Key Features
Power: 3.0 HP, which ensures a powerful massage.
Maximum flow rate: 635 liters per minute.
Noise level: Designed with a low noise level to optimize relaxation in your spa.
Dimensions: 40 x 20.5 x 20.5 cm, a compact size that fits in most spa systems.
Power consumption: 2.2 kW at 230 V and 50 Hz.
RPM: 2900 revolutions per minute for stable performance.
Material: Sturdy aluminum casing that ensures durability and a longer service life.
Certifications: CE and TUV certified for safety and quality.
Warranty: 2-year warranty for peace of mind.
The LX LP300 Spa Massage Pump 3 HP - 1 Speed is a reliable choice for spa owners who are looking for powerful, quiet, and easy-to-install massage pumps.
The LX AP700-V2 Air Spa Blower is a powerful and reliable air pump for spas, designed to create the ultimate bubble experience. When your spa blower wears out or breaks over time, the LX AP700-V2 is an excellent replacement. This blower is universally applicable and fits many different brands and systems such as Balboa, Gecko, and Davey, thanks to its standard connection and ease of use. With an output of 700 watts and 0.94 HP, the blower offers powerful performance, filling your spa water with bubbles and ensuring your spa is always ready for relaxation.
Why choose the LX AP700-V2 Air Spa Blower?
The LX AP700-V2 Air is a standard product in the spa world, making it easy to replace without having to worry about brand-specific compatibility. This blower provides a powerful airflow, ensuring your spa always performs optimally. When your current blower is broken, you can easily check if the LX AP700-V2 is suitable by looking at the specifications of your old blower, such as the wattage and horsepower (HP). Thanks to its universal connection and robust design, the LX AP700-V2 is a reliable choice for your spa.
Powerful and efficient performance
The blower delivers 700 watts of power and 0.94 HP, ensuring a powerful bubble system in your spa. It consumes 3.3 amps, making it energy-efficient without sacrificing performance. Additionally, the LX AP700-V2 Air is equipped with a standard electrical connection and a sturdy cable, making installation simple. The unit operates at 50 Hz, which is common in many European regions, and fits into virtually any existing spa system thanks to its universal connection.
Installation and use
The LX AP700-V2 comes with a standard cable and universal connection, which makes installation effortless. You can easily replace the blower yourself thanks to the simple Plug & Play connection. Ensure that the specifications of your old blower match those of the LX AP700-V2 to guarantee that it is a suitable replacement. The blower features a robust design that can withstand wear and tear, and with a 2-year warranty, you have the assurance that you can enjoy powerful bubbles in your spa for a long time.With the LX AP700-V2 Air Spa Blower, you ensure that you can always enjoy powerful bubbles and a relaxing spa experience, with the assurance of reliable performance and easy installation.
The LX JA50 Spa Circulation Pump is a highly reliable and popular choice for circulating water in your spa. This circulation pump keeps the water in motion, which is essential for maintaining water quality. Thanks to the constant circulation, chemicals are effectively distributed and the water remains clean and clear. The JA50 is compact and powerful enough to meet the needs of most spas, especially those originating from China. Despite its modest size, the pump delivers excellent performance and is suitable for a wide range of spa installations.
Capacity and consumption LX JA50
The LX JA50 circulation pump has an output of 0.50 HP and consumes only 0.37 kW at full power. With an impressive capacity of 180 liters per minute, this pump ensures optimal water flow in your spa, which helps to improve filtration and the effectiveness of chemicals.
Connection and dimensions
The LX JA50 is designed with a standard 1.5-inch connection (47 mm), which means it is easy to integrate into most spa systems. The dimensions of the pump are 35 x 17.5 x 25 cm (LxHxW), making it compact and easy to install. If your spa has a different connection, you can use a coupling to make the pump fit your installation.
Use and installation LX JA50
The installation of the LX JA50 is simple and requires few additional materials. To install or replace the pump, first close the spa valves to prevent water from flowing into the pump. Always ensure that the spa is completely switched off before disconnecting the pump. Although some water may still come out of the pump during removal, you can safely replace the pump with the valves closed and the spa switched off. It is important to read the manual carefully before performing the installation to ensure that everything is done correctly.
Features LX JA50
Air-cooled: The pump is air-cooled, which ensures efficient cooling during operation.
Suitable for water temperatures up to 40 degrees: The pump is ideal for spas and can handle the higher water temperatures in hot tubs well.
CE and TUV certified: The LX JA50 meets strict European safety and quality standards.
Standard 1.5-inch connection: This universal size ensures that the pump fits most spa systems without modifications.
The LX JA50 circulation pump is an excellent choice for spa owners looking for a reliable, energy-efficient pump with good performance. This pump offers sufficient capacity for most spas and is easy to install, keeping your spa water clear and clean at all times.
The LX LP200 Spa Massage Pump 2 HP - 1 Speed is a powerful and reliable pump specially designed for use in spas. This pump is widely used in Chinese spas and is suitable for almost all brands. With an output of 2.0 HP, this pump provides excellent water flow to the jets, allowing you to enjoy an intensive and relaxing massage experience in your spa. One of the key features of this pump is its low noise level, allowing you to enjoy your spa in peace.
This massage pump operates at a single speed, meaning you can operate it easily without complicated settings. The LX LP200 is CE and TUV certified, meaning it meets all safety requirements and is reliable in use. The pump has a standard 2-inch connection, which means it can almost always be installed in most spas without modifications. It can pump up to 535 liters of water per minute, making it suitable for larger spas with multiple jets.
Capacity and consumption of LX LP200 Spa Massage Pump 2 HP - 1 Speed
The LX LP200 has an output of 2.0 HP, which corresponds to an energy consumption of 1.5 kW at full power. With this, the pump can circulate a maximum of 535 liters of water per minute, which is more than sufficient for the intensive use of spa jets.
Use and installation of LX LP200 Spa Massage Pump 2 HP - 1 Speed
Installation of the LX LP200 is simple and does not require any special materials. All you need to do is ensure the connections match your current piping. If you have a connection other than 2 inches, you can use a coupling to connect the pump regardless. The pump has dimensions of 40 x 20.5 x 20.5 cm, allowing it to fit into most spas without the need for many modifications. The electrical connection is a standard 3-core cable.
Important installation instructions
When installing the pump, ensure that the spa is turned off and the water valves are closed to prevent leaks. Always read the manual carefully before replacing the pump. Should some water come out of the pump during installation, be prepared for it.
Features of the LX LP200 Spa Massage Pump 2 HP - 1 Speed
Air-cooled for a longer service life
CE and TUV certified for safety and reliability
Low noise production for a peaceful spa experience
Standard 2-inch connection, fitting most spas
This powerful and efficient pump ensures optimal water circulation and a fantastic massage experience in your spa, while the energy-efficient design helps you save on electricity costs.
The LX JA35 Spa Circulation Pump is a popular and reliable choice for spa owners looking for an efficient and powerful circulation pump for their spa. This circulation pump, with an output of 0.33 HP, ensures that the water in your spa remains constantly in motion, which is essential for proper filtration and optimal performance of added chemicals. LX pumps are widely used in spas, particularly those originating from China, and are valued for their durability and performance. The LX JA35 is a compact pump, but with an impressive flow capacity of 150 liters per minute, it is more than suitable for most spas.
Capacity and Consumption LX JA35
The LX JA35 circulation pump has an output of 0.33 HP, which corresponds to an energy consumption of 0.25 kW. This means it is highly energy-efficient, keeping your spa water in constant motion without you needing to worry about high energy costs. The pump can circulate up to 150 liters per minute, which ensures optimal water circulation in your spa, essential for maintaining a clean and hygienic bath.
Use and Installation LX JA35
The installation of the LX JA35 is simple and requires few additional materials, provided the connections match those of your current spa installation. The pump features a standard 1.5-inch connection, making it easy to integrate into most spas. Should the size of your piping differ, you can always use a coupling piece to connect the pump. Thanks to its compact size (35 x 17.5 x 25 cm), the pump takes up little space and is easy to place, even in smaller installations. When replacing the pump, ensure that the valves are closed to prevent leaks. Always read the manual carefully before installing or replacing the pump.
Features LX JA35
Air-cooled: Ensures efficient cooling of the pump during operation.
CE and TUV certified: Meets strict European safety standards, ensuring you a safe and reliable product.
Standard 1.5-inch connection: Universal size for easy installation.
Compact design: With dimensions of 35 x 17.5 x 25 cm, the pump is small and space-saving.
Lightweight: Weighs only 5.5 kg, which makes installation even easier.
The LX JA35 circulation pump is an excellent choice for owners of small to medium-sized spas looking for a reliable, efficient, and easy-to-install pump. Thanks to its compact design and energy-efficient performance, this pump offers an excellent balance between power and efficiency, keeping your spa water in top condition.
The LX WP250 Spa Massage Pump 2.5 HP - 2 Speed is a powerful and versatile massage pump designed for use in virtually all spas. This pump is widely used in Chinese spas and is known for its reliable performance, quiet operation, and long service life. The pump housing has a special design, which ensures excellent water flow and a low noise level, allowing you to enjoy a soothing and efficient spa experience.
The LX WP250 has two speed settings, making it flexible to use. You can choose a lower speed for gentle water circulation and a higher speed for a powerful massage via the jets of your spa. This versatility makes the pump suitable for various types of use, from relaxing circulation to intensive massages. Thanks to the standard 2-inch connection, the pump is easy to install without the need for major adjustments to the piping.
With a power of 2.5 HP and a maximum capacity of 670 liters per minute, the LX WP250 is ideal for medium to larger spas that require a strong water flow. The robust design of the pump, with an aluminum housing, ensures a long service life, even with intensive use.
Capacity and Consumption
The LX WP250 has a power output of 2.5 HP and consumes 1.8 kW at full power. With a maximum capacity of 670 liters per minute, the pump offers powerful performance, which is ideal for spas that are used intensively or that require a strong water flow through the jets. Thanks to the two speeds (1450 revolutions per minute at low speed and 2900 revolutions per minute at high speed), you can adjust the performance and energy consumption to your specific wishes.
Use and Installation
Installing the LX WP250 is simple and requires no extra materials, as long as the connections match those of your current spa. With dimensions of 43.5 x 23.5 x 20 cm (length x height x width), the pump fits into most standard spa configurations. If your spa does not have a standard 2-inch connection, you can easily use a coupling piece to ensure a smooth installation.
Make sure to turn off the spa and close the valves before replacing the pump to prevent water leakage. Although a small amount of water may always come out of the pipes when you disconnect the pump, the installation is otherwise trouble-free. Always follow the manual to install the pump safely and correctly.
Key Features
Power: 2.5 HP, ideal for powerful water flow and massage performance in medium to larger spas.
Capacity: 670 liters per minute, which ensures strong and constant water circulation.
Two speeds: Low speed (1450 rpm) for circulation and high speed (2900 rpm) for intensive massages.
Energy consumption: Consumes 1.8 kW at full power, which ensures powerful performance without unnecessary energy use.
Quiet operation: The special design of the pump and the air-cooled motor ensure a low noise level, ideal for a relaxing spa experience.
Material: Robust aluminum housing for extra durability and long service life, even with intensive use.
Certifications: CE and TUV certified, which guarantees safety and reliability.
Standard connection: 2 inch, fits into most spas without modifications.
The LX WP250 Spa Massage Pump 2.5 HP - 2 Speed is an excellent choice for spa owners looking for a powerful and versatile pump with flexible speed options. Its robust and quiet design, combined with easy installation, makes it an ideal pump for medium to larger spas.
The LX WTC 50M Spa Circulation Pump 0.33 HP is a compact and efficient circulation pump, ideal for small to medium-sized spas. This pump, widely used in Chinese spas, ensures that the water in your spa is constantly moving. This is crucial for proper filtration and optimal performance of chemicals in the water. The LX 0.33 HP is an entry-level circulation pump that, despite its modest size, delivers excellent performance. It offers the right balance between energy consumption and circulation power, making it perfect for smaller spa systems.
The small and robust design makes the LX WTC 50M easy to install, even in limited spaces. The pump features a standard 1.5-inch connection, allowing it to fit into most spas without additional adjustments. This circulation pump is air-cooled, which ensures it runs quietly and efficiently. It is CE and TUV certified, which guarantees the quality and safety of the pump.
Capacity and Consumption
The LX WTC 50M has an output of 0.33 HP and consumes only 0.25 kW at full power. This makes it very energy-efficient, which is essential for spas that run for long periods. Despite the low energy consumption, the pump has a maximum capacity of 240 liters per minute, which ensures efficient and constant water circulation. This is more than enough to ensure proper filtration in small to medium-sized spas.
Use and Installation
Installing the LX WTC 50M is simple and requires no special materials, as long as the connections match those of your spa. With dimensions of 29 x 20 x 16 cm (length x height x width), the pump is compact and fits easily into smaller installations. Should your spa have a different connection than the standard 1.5 inch, an adapter can be used to ensure the installation proceeds smoothly.
Ensure that the spa is turned off before you begin the installation. By closing the spa valves, you prevent water from escaping the pipes. Although some water may still leak out when disconnecting the old pump, the installation process is otherwise straightforward. It is always advisable to consult the manual for proper and safe installation.
Key Features
Power: 0.33 HP, sufficient for efficient water circulation in small to medium-sized spas.
Capacity: 240 liters per minute, providing a stable water flow for proper filtration and chemical distribution.
Energy-efficient: Consumes only 0.25 kW, resulting in minimal impact on your energy bill.
Compact and lightweight: Due to its small dimensions, the pump is ideal for spas with limited space.
Quiet operation: Thanks to the air-cooled motor, the pump runs quietly, which is ideal for a relaxing spa environment.
Certifications: CE and TUV certified for safety and reliability.
Material: Aluminum housing for extra durability and a long service life.
Standard connection: 1.5 inch, ensuring easy installation without modifications.
The LX WTC 50M Spa Circulation Pump 0.33 HP is an excellent choice for spa owners looking for a compact, energy-efficient, and quiet pump that provides sufficient power for small to medium-sized spas. Its simple installation process and reliable performance make it a practical and durable solution for circulating water in your spa.
The LX WP200 Spa Massage Pump 2 HP - 2 Speed is a powerful, versatile massage pump designed to provide an optimal spa experience. This pump is widely used in Chinese spas and is known for its excellent performance and low noise level. With a power output of 2 HP and two speed settings, the LX WP200 offers flexibility and control over the water flow through your spa's jets. This allows you to choose between a powerful massage or quieter circulation, depending on your preference or the situation.
The specially designed pump housing ensures efficient water flow while keeping noise levels low, which is ideal for spa users who want to enjoy a quiet and relaxing environment. The 2-speed function gives you the choice between a lower speed for circulation and a higher speed for powerful massages, contributing to the versatility of this pump.
With a standard 2-inch connection, the LX WP200 is easy to install in most spas without requiring major modifications. The pump features a robust aluminum housing that increases durability and ensures a long lifespan, even with intensive use.
Capacity and Consumption
The LX WP200 has a power output of 2.0 HP and consumes 1.5 kW at full power, which ensures powerful performance without excessive energy consumption. The pump can circulate a maximum of 620 liters per minute, which is sufficient to provide most spas with a powerful water flow. With the two speed options (1450 rpm for low speed and 2900 rpm for high speed), you can optimize energy consumption and performance for different situations.
Usage and Installation
Installing the LX WP200 is simple and requires no extra materials, as long as the existing connections match the pump. With dimensions of 43.5 x 23.5 x 20 cm (length x height x width), the pump fits into most standard spa configurations. If your spa connection differs, a coupling can be used to ensure the installation proceeds without issues.
For a safe installation, you must turn off the spa and close the valves to prevent water from escaping while replacing the pump. Although a small amount of water may come out of the pipes when the pump is disconnected, the installation process is otherwise straightforward. Always follow the manual for a safe and correct installation.
Key Features
Power: 2.0 HP, providing powerful water flow and optimal performance.
Capacity: 620 liters per minute, ensuring strong and constant water circulation.
Two speeds: The pump has two speed settings (1450 rpm for low speed, 2900 rpm for high speed), allowing you to adjust the water flow to your needs.
Energy-efficient: With a consumption of only 1.5 kW at full power, the pump is relatively energy-efficient.
Quiet operation: The specially designed pump housing and air-cooled motor ensure a low noise level, which is ideal for a quiet spa experience.
Certifications: CE and TUV certified, ensuring the safety and reliability of the pump.
Material: Robust aluminum housing for extra durability and a long lifespan.
Standard connection: 2-inch, fits in most spas without modifications.
The LX WP200 Spa Massage Pump 2 HP - 2 Speed offers powerful performance and versatility, with two speed options that provide both powerful massages and quiet water circulation. Its quiet and durable design makes it an ideal choice for spa owners looking for a reliable and flexible pump.
The LX JA75 Spa Circulation Pump is a reliable and powerful pump specially designed for most spas. LX pumps are frequently used in spas originating from China and are known for their quality and reliability. The circulation pump plays an essential role in filtering the water in your spa by keeping it in constant motion. This ensures that chemicals such as chlorine and other water treatment products remain effective and that the water is filtered evenly. The LX JA75 is a compact yet powerful pump suitable for a wide range of spas, and can be easily integrated into existing systems thanks to its standard 1.5-inch connection.
Capacity and consumption of the LX JA75
The LX JA75 has an output of 0.75 HP and can circulate up to 300 liters per minute, which is more than sufficient for most spas. The power consumption at full capacity is 0.55 kW, making this pump both powerful and reasonably energy-efficient. This makes the pump ideal for spa owners who want a reliable pump without huge energy costs.
Use and installation of the LX JA75
Installation of the LX JA75 is simple and requires few additional materials. You only need to ensure that the pump's connections match your spa's existing connections. With a standard 1.5-inch connection (47 mm), the pump is compatible with most spas. If the connections do not match, you can always use a coupling piece to make the pump fit. The pump has dimensions of 38 x 18 x 23.5 cm, making it compact enough for smaller spaces without sacrificing power.
Before installing or replacing the pump, it is important to switch off the spa and close the valves so that no water flows through the pump. This prevents water loss and makes it safer to remove and replace the pump. However, some residual water may always come out of the pump when disconnecting it. Therefore, always read the manual carefully before you begin the installation or replacement of the pump.
Features of the LX JA75
Air-cooled: The air-cooled motor ensures the pump operates efficiently without overheating.
CE and TUV certified: These certifications guarantee that the pump meets strict European quality and safety standards.
Suitable for a wide range of spas: The pump is a popular choice for spas originating from China and is universally applicable.
Small, compact pump: Due to its compact dimensions, the pump is easy to install, even in smaller spaces.
The LX JA75 circulation pump is an excellent choice for spa owners looking for a powerful yet compact pump for their spa. Thanks to its high capacity and efficient energy consumption, your spa water will remain in top condition without high energy costs.
The LX WP250 Spa Massage Pump 3 HP - 2 Speed is a powerful and versatile massage pump, suitable for almost all spas. Commonly used in Chinese spas, this pump is designed to effectively push water through the jets, ensuring an optimal massage experience. The specially designed pump housing combines low noise levels with high performance, contributing to the peace and relaxation in your spa.
The 3 HP - 2 speed function makes the pump extra versatile, allowing you to choose between two speeds. The low speed is ideal for water circulation and filtration, while the high speed provides a powerful flow of water through the jets, enabling a deep and intense massage. Thanks to the standard 2-inch connection, this pump is easy to install in almost any spa without needing modifications to the piping.
With an output of 3.0 HP and an impressive capacity of 730 liters per minute, the LX WP250 is powerful enough for large spas and ensures an efficient and consistent water flow, even during intensive use.
Capacity and Consumption
The LX WP250 has an output of 3.0 HP and consumes 2.2 kW at full power, ensuring powerful performance. With a maximum capacity of 730 liters per minute, this pump provides more than enough water flow for intensive massages and efficient water circulation. The pump has two speed settings: 1450 rpm for the low speed (ideal for circulation) and 2900 rpm for the high speed (for powerful massage performance).
Use and Installation
Installing the LX WP250 3 HP - 2 speed is simple and requires no additional materials as long as the connections match those of your spa. The pump has compact dimensions of 43.5 x 23.5 x 20 cm (length x height x width), making it easy to place in most spa installations. Should your spa have a different connection than the standard 2-inch connection, you can easily use an adapter to ensure a hassle-free installation.
Before starting the installation, ensure the spa is switched off and the valves are closed to prevent water leakage. The installation process is otherwise simple and safe if you follow the manual. When replacing the pump, a little water may come out of the pipes, but this is not an issue if the proper precautions are taken.
Key Features
Power: 3.0 HP, providing a powerful water flow and deep massages.
Capacity: 730 liters per minute, ensuring powerful and constant water circulation.
Two speeds: Choice between low speed (1450 rpm) for circulation and high speed (2900 rpm) for intense massages.
Energy consumption: Consumes 2.2 kW at full power, making the pump powerful without unnecessary energy consumption.
Silent operation: Thanks to the specially designed pump housing and air-cooled motor, the noise level remains low, ideal for a relaxing spa experience.
Durable material: The aluminum housing ensures a long service life, even with intensive use.
Certifications: CE and TUV certified for safety and reliability.
Standard connection: 2 inch, making the pump suitable for almost any spa installation without modifications.
The LX WP250 Spa Massage Pump 3 HP - 2 Speed offers powerful performance and versatility, making it an excellent choice for medium to large spas. Thanks to its two speeds and quiet design, this pump is ideal for both quiet circulation and intense massages. The robust design and easy installation make it a reliable option for spa owners looking for durable and powerful equipment.
The LX TDA50 Spa Circulation Pump 0.5 HP is a quiet and efficient pump, designed to keep the water in your spa in continuous motion. This is crucial for proper filtration and for the optimal functioning of chemicals in the water. The circulation pump is an essential part of the spa system and prevents the water from becoming stagnant, which benefits water quality. The LX TDA50 is particularly suitable for small to medium-sized spas and is an entry-level model that combines performance and reliability.
This circulation pump has an output of 0.5 HP, making it powerful enough to effectively circulate the water in most spas. Despite its powerful operation, the pump has a low noise level, which contributes to a quiet and relaxing spa experience. The pump is equipped with a standard 1.5-inch connection, which means it can be easily installed in most spas without requiring additional adjustments to the piping.
Capacity and Consumption
The LX TDA50 circulation pump has an output of 0.5 HP and consumes 0.37 kW at full power, meaning it is energy-efficient and has minimal impact on the electricity bill. With a maximum capacity of 180 liters per minute, this pump offers sufficient power to effectively circulate the water through the spa filtration system, contributing to clean and clear water.
Use and Installation
The LX TDA50 Spa Circulation Pump is easy to install and requires no special materials or tools, as long as the connections match those of your spa. The pump has a compact size of 35 x 18 x 23.5 cm (length x height x width), making it easy to fit into most spas without major adjustments. However, should your spa have different connections than the standard 1.5-inch, a coupling piece can be used to ensure a smooth installation.
Before installing or replacing the pump, ensure that the spa is turned off and that the valves are closed to prevent water loss. Although a small amount of water may come out of the pipes when you disconnect the pump, the process is otherwise straightforward. Always follow the included manual for a safe and correct installation.
Key Features
Power: 0.5 HP, which ensures reliable and constant water circulation.
Capacity: 180 liters per minute, which is ideal for small to medium-sized spas.
Energy-efficient: The consumption of only 0.37 kW makes this pump highly efficient.
Quiet operation: The air-cooled motor and plastic housing reduce noise levels and vibrations, ensuring a quiet spa experience.
Certifications: CE and TUV certified, confirming the safety and quality of the pump.
Material: Made of durable aluminum with a sturdy plastic housing to reduce vibrations.
Standard connection: 1.5-inch, fits most spas without adjustments.
The LX TDA50 Spa Circulation Pump 0.5 HP is an excellent choice for spa owners looking for an energy-efficient, quiet, and easy-to-install circulation pump. Its compact design and reliable performance make this model ideal for small to medium-sized spas, guaranteeing efficient water circulation.
The LX TDA200 Spa Massage Pump 2 HP - 1 Speed is a powerful and affordable massage pump, specifically designed for use in almost all spas. This pump, often used in Chinese spas, ensures a constant water flow through your spa's jets, resulting in a relaxing and pleasant massage experience. The pump housing is made of sturdy aluminum, which ensures durability and a long lifespan, even with intensive use.
With a power of 2.0 HP and a maximum capacity of 450 liters per minute, this pump offers more than enough power to efficiently pump water through your spa's jets. This makes it ideal for spa owners looking for an entry-level model that still delivers impressive performance. The 1-speed function provides a constant speed, ensuring the water is pumped through the jets at an even pressure.
The LX TDA200 is equipped with a standard 1.5-inch connection, which makes the installation process simple. This means that the pump can be installed in most spas without major modifications. Thanks to the air-cooled motor, the pump continues to operate efficiently with a low noise level, which contributes to a relaxing spa experience.
Capacity and Consumption
The LX TDA200 has a power of 2.0 HP and consumes 1.5 kW at full power, providing sufficient power for a powerful water flow. With a maximum flow rate of 450 liters per minute, the pump ensures that the water circulates through your spa quickly and efficiently. This makes the LX TDA200 suitable for medium to larger spas that benefit from a powerful massage pump.
Use and Installation
Installing the LX TDA200 Spa Massage Pump is simple and requires no additional materials, provided the connections match those of your spa. The pump has a compact size of 40 x 20.5 x 17.5 cm (length x height x width), which means it fits into most spas without any modifications to the piping. If you have a different connection than the standard 1.5 inch, a connector can easily be added.
Before you start replacing the pump, ensure that you turn off the spa and close the valves to prevent water leakage. Although some water may come out of the pipes when removing the pump, the installation usually proceeds smoothly. Always follow the manual for a safe and correct installation.
Important Features
Power: 2.0 HP for powerful water flow and optimal massage strength.
Capacity: 450 liters per minute, ideal for efficiently circulating water in medium and large spas.
Energy consumption: Consumes 1.5 kW at full power, providing a good balance between power and efficiency.
Noise level: The air-cooled motor ensures quiet operation, which is ideal for relaxing spa sessions.
Material: The pump housing is made of sturdy aluminum, ensuring durability and a long lifespan.
Certifications: CE and TUV certified, which guarantees the safety and reliability of the pump.
Standard connection: 1.5 inch, fits most spas without modifications.
The LX TDA200 Spa Massage Pump 2 HP - 1 Speed is an excellent choice for spa owners looking for an affordable, powerful, and reliable massage pump. Its compact and durable design, combined with easy installation, makes this a versatile solution for most spas.
The LX AP900-V2 Air Spa Blower is a powerful and reliable air pump, ideal for creating delightful bubbles in your spa. Whether you are relaxing after a long day or want to create a spa experience for friends and family, this blower ensures that your spa always performs optimally. The LX AP900-V2 Air is designed to be easily replaced without being dependent on a specific spa brand. This means that you can use this blower in combination with various brands such as Balboa, Gecko, and Davey. With a power of 900 watts and a strength of 1.2 HP, the blower provides a powerful airflow and a pleasant spa experience.
Why choose the LX AP900-V2 Air Spa Blower?
This blower is designed to be universally applicable, making it an ideal replacement for various brands and systems. When your current blower needs replacing, you can easily check if the LX AP900-V2 Air is suitable by comparing the specifications such as power and horsepower (HP) of your old blower. The blower offers an airflow that is powerful enough for a full bubble experience, but is also energy-efficient and reliable. The robust design ensures long-lasting performance, even with intensive use.
Powerful performance and energy-efficient
With a power of 900 watts and an output of 1.2 HP, the LX AP900-V2 Air is perfectly suited for spas of various sizes. The blower consumes 4.5 amps, which ensures powerful yet efficient operation. This blower offers consistent performance and is energy-efficient, so you do not incur unnecessary costs. Thanks to the universal connection and the standard electrical cable, installation is simple and quick. The blower operates at 50 Hz, which is common in many European countries, and is suitable for various control systems, making it versatile.
Simple installation and use
The LX AP900-V2 Air is easy to install thanks to its Plug & Play connection. The standard cable and universal connection make replacing your old blower an effortless task. Check the specifications of your old blower beforehand to be sure that the LX AP900-V2 is suitable as a replacement. The blower is designed to withstand intensive use and is equipped with a robust housing that provides protection against the elements, making it a durable choice.
With the LX AP900-V2 Air Spa Blower, you ensure that your spa is always ready for use, with powerful performance, simple installation, and reliable operation.
The LX AP400-V2 Air Spa Blower is a powerful and reliable air pump, ideal for creating a wonderful bubbling effect in your spa. Whether you are relaxing in your own spa, this blower ensures that you can always enjoy an optimal bubble experience. Over time, a blower can wear out or break down, but the LX AP400-V2 offers an excellent replacement option. This blower is universally applicable and is suitable for many different spa brands, such as Balboa, Gecko, and Davey. Thanks to its standard specifications and connection, this blower is easy to replace and install.
Features of the LX AP400-V2 Air Spa Blower
This spa blower has a power of 400 watts and delivers 0.6 HP, which provides a powerful airflow and bubbles. The LX AP400-V2 has a universal standard connection, making it compatible with most spa systems. The electrical connection is simple and comes with a standard cable, making installation quick and hassle-free.
The blower operates at a frequency of 50 Hertz, which is common in many European countries, and consumes 2.5 amps of power. This makes the blower energy-efficient and reliable, even with long-term use. The pump comes with a 2-year warranty, so you can enjoy your relaxing spa experience with peace of mind.
What should you pay attention to when replacing?
When replacing a blower, it is important that your new blower matches the specifications of your old one. Check the power (in watts), the horsepower (HP), and the amperage to be sure that the LX AP400-V2 is a suitable replacement. Visually, the LX AP400-V2 will likely also look like your current blower, and if you are in doubt, you can always send a photo to confirm compatibility.With the LX AP400-V2 Air Spa Blower, you ensure your spa is always ready for use, and you can enjoy powerful bubbles and ultimate relaxation.
The LX H30-R3 spa heater 3 kW - 1.5 inch (T-shape) is a reliable and efficient solution for heating the water in your spa. This powerful heater, commonly used in spas from China, ensures fast and constant heating of the water, allowing you to comfortably enjoy your spa experience. The T-shaped construction offers a flexible installation option, especially in situations where space is limited. The LX H30-R3 is equipped with a flow switch, meaning the heater only operates when there is sufficient water flow, keeping the system safe.
Capacity and Consumption LX H30-R3 3 kW
The LX H30-R3 has an output of 3.0 kW, which ensures rapid heating of the spa water. With a maximum flow rate of 400 liters per minute, the heater can easily handle large volumes of water, ensuring efficient heating of your spa. This makes the heater suitable for medium to large spas.
Usage and Installation LX H30-R3 3 kW
Thanks to the standard 1.5-inch connection, the LX H30-R3 is easy to replace and connect to most spa systems. Installation is simple and does not require additional materials, unless your piping has non-standard dimensions. In that case, connectors can be used to facilitate the connection. The heater has a compact size of 34 x 20 x 5 cm, which makes it possible to place the heater without taking up too much space. Ensure that the power is switched off and the valves are closed before replacing the heater to prevent leaks and damage to the installation.
Features LX H30-R3 3 kW
Safe operation with flow protection: The heater only works if there is sufficient water flow, which increases safety.
Compact T-shaped design: Makes it easier to place the heater in tight spaces.
Standard 1.5-inch connection: Compatible with most spa systems without the need for additional adjustments.
CE and TÜV certified: The heater meets European safety standards, allowing you to enjoy your spa worry-free.
The LX H30-R3 spa heater 3 kW - 1.5 inch (T-shape) is an excellent choice for spa owners looking for a reliable, efficient, and easy-to-install heater. With its safe operation, universal connection, and powerful heating, this heater is an ideal upgrade or replacement for your spa system.
The LX H30-R2 spa heater 3 kW - 1.5 inch (L-shape) is a reliable and efficient solution for heating the water in your spa. This heater, from the popular LX series, is widely used in spas of various brands, especially those from China. The heater is designed to heat water quickly and effectively via a powerful 3 kW heating element, with the circulation pump pumping the water through the heater. Thanks to the built-in flow protection, the heater is safe to use and only switches on when there is sufficient water flow.
Capacity and Consumption of the LX H30-R2 3 kW
The LX H30-R2 has an output of 3.0 kW, which means the water is quickly heated to the desired temperature. The heater supports a maximum flow rate of 400 liters per minute, ensuring constant and efficient heating. This makes the LX H30-R2 ideal for medium-sized spas where rapid water heating is desired.
Use and Installation of the LX H30-R2 3 kW
The LX H30-R2 is easy to install thanks to its L-shaped design, which fits perfectly into tight spaces in spas. With a standard 1.5-inch connection, the heater can be easily coupled to existing pipes without the need for additional materials. However, if your pipes have a different connection, couplings can be used to make the installation possible.
The heater has compact dimensions of 29 x 19.5 x 5 cm, making it easy to place without having to make major adjustments to your spa system. The LX H30-R2 is also CE and TÜV certified, which means this heater meets the strictest safety standards. When replacing it, ensure that you switch off the power supply and close the spa valves to prevent water leakage.
Features of the LX H30-R2 3 kW
CE and TÜV certified: Meets strict European safety and quality standards.
Standard 1.5-inch connection: Makes it easy to connect the heater to existing systems without additional tools.
L-shaped design: Ideal for compact installations or when space is an important factor.
Flow protection: For extra safety, the heater only switches on when there is sufficient water flow.
The LX H30-R2 spa heater 3 kW - 1.5 inch (L-shape) is an excellent choice for people who want to heat their spa quickly and efficiently, while safety and ease of use are guaranteed.
The LX H30-R1 spa heater 3 kW - 2 inch is a reliable and powerful heater specifically designed to heat the water in your spa quickly and efficiently. This heater is suitable for almost all spas, especially those originating from China, where LX heaters are widely used. Thanks to its robust design and standard 2-inch connection, this heater is easy to install and replace without major modifications to your spa system.
Capacity and Consumption of the LX H30-R1 3 kW
The LX H30-R1 has an output of 3 kW, which means the water in your spa is heated quickly. This heater supports a maximum flow rate of 400 liters per minute, ensuring fast and effective water heating, even in larger spas. The heater operates on a standard 230V connection and consumes 13.6 amperes, ensuring energy efficiency without compromising performance.
Use and Installation of the LX H30-R1 3 kW
The installation of the LX H30-R1 3 kW is simple and requires no complex modifications as long as your spa is equipped with the standard 2-inch connection. The compact dimensions of 29 x 16 x 5 cm make the heater easy to place in most spa housings. If your spa has a different connection size, you can easily use a coupling to make the heater fit. Replacing the heater is also straightforward: close the spa valves, ensure the system is off, and replace the heater without water escaping.
The heater is equipped with a flow switch, ensuring it only operates when there is sufficient water flow. This protects the heater from overheating and ensures safe use.
Features of the LX H30-R1 3 kW
This spa heater is CE and TÜV certified, meaning it meets strict European safety and quality standards. The housing is made of stainless steel, ensuring a long service life and protection against rust and corrosion, even with intensive use.The LX H30-R1 spa heater 3 kW - 2 inch is an excellent choice for heating your spa. With its reliable performance, simple installation, and durability, this heater offers everything you need to optimize your spa experience.
The LX TDA75 circulation pump has an output of 0.75 HP and consumes only 0.55 kW at full power, which means it is energy-efficient. With a maximum flow rate of 300 liters per minute, the pump ensures that water circulates continuously through the filtration system, which is essential for clear and clean water. This pump is an excellent choice for spas that require reliable performance and low energy consumption.
Use and Installation
Installing the LX TDA75 is simple and requires no additional materials, provided your spa's connections match the pump's standard 1.5-inch connection. With dimensions of 38 x 18 x 23.5 cm (length x height x width), the pump is compact and fits into most existing systems without the need for major adjustments. If your spa has different connections, an adapter can easily be used.
For a safe installation, it is important that the spa is turned off and the valves are closed to prevent water leakage. Although some water may escape when disconnecting the old pump, the rest of the installation is simple and quick. Following the included manual ensures that the pump is installed correctly and safely.
Key Features
Power: 0.75 HP, sufficient to efficiently circulate water in most spas.
Capacity: 300 liters per minute, which ensures a constant and effective water flow.
Energy-efficient: Consumes only 0.55 kW, ensuring efficient operation without unnecessary energy consumption.
Silent operation: Thanks to the air-cooled motor and plastic housing, vibrations and noise are kept to a minimum.
Certifications: CE and TUV certified, which guarantees the safety and reliability of the pump.
Material: Made of durable aluminum with a plastic housing to counter vibrations and extend service life.
Standard connection: 1.5 inch, fits most spas without modifications.
The LX TDA75 Spa Circulation Pump 0.75 HP is an excellent choice for spa owners looking for an energy-efficient, quiet, and easy-to-install pump that provides reliable water circulation. This model offers the perfect balance between power and efficiency and is suitable for most spas, making it a versatile and durable solution.
The LX TDA100 Spa Circulation Pump 1 HP is a reliable and quiet circulation pump, specially designed to keep the water in your spa in continuous motion. This is essential for effective filtration and ensures that the chemicals in the water work optimally. This circulation pump is particularly suitable for spas of various sizes and is often used in spas originating from China.
With an output of 1 HP, the pump provides sufficient power for circulating water with a capacity of 320 liters per minute, ensuring your water always stays clear and fresh. The pump is air-cooled and operates efficiently without producing much noise, which is ideal for people who want to enjoy a quiet spa experience.
The LX TDA100 is equipped with a standard 1.5-inch connection, making it easy to install the pump in most spas. It is an excellent choice for spa owners looking for a reliable circulation pump that is easy to replace and ensures stable water circulation.
Capacity and Consumption
The LX TDA100 circulation pump has an output of 1 HP and consumes only 0.75 kW at full power. This makes it very energy-efficient to use. With a maximum flow rate of 320 liters per minute, the pump ensures a constant circulation of water, which is essential for the proper functioning of the spa filters and chemicals.
Use and Installation
Installing the LX TDA100 is simple and requires no special tools or materials, as long as the connections match those of your spa. The dimensions of the pump are 38 x 18 x 23.5 cm (length x height x width), making it suitable for most installations. Should your spa have connections other than the standard 1.5-inch connection, you can easily use a coupling.
Before you begin the installation, ensure that you turn off the spa and close the valves to prevent water leakage. Always read the manual for a safe installation and to maximize the lifespan of the pump. The pump comes with a standard electrical cable, which further simplifies installation.
Important Features
Power: 1.00 HP, sufficient for efficient water circulation in most spas.
Capacity: 320 liters per minute, which ensures a good water flow through the filtration system.
Energy consumption: Only 0.75 kW, making this pump very energy-efficient.
Silent operation: Thanks to the air-cooled motor and the plastic housing, which reduces vibrations, the pump operates whisper-quietly.
Certifications: CE and TUV certified, which guarantees the safety and quality of the pump.
Material: Made of durable aluminum, which ensures a long lifespan.
Standard connection: 1.5 inch, fits in most spas without extra modifications.
The LX TDA100 Spa Circulation Pump 1 HP offers an excellent combination of performance, durability, and quiet operation, and is ideal for spa owners seeking a reliable and energy-efficient circulation pump.
LX is a Chinese manufacturer of spa components. From powerful massage pumps to high-quality spa heaters and spa blowers. LX offers premium parts at an affordable price. Furthermore, the components fit in almost any spa.
