The Spectravision 60W transformer ensures a safe and reliable power supply for your pool lighting. It is essential not to use 230 Volts in the pool; therefore, this transformer converts the mains voltage of 220/240 Volts into a safe 12 Volt low voltage. This allows you to enjoy beautiful lighting in your pool without any worries.
With the included remote control, you can easily operate your pool lights from the edge of the pool or even from your lounge chair. The transformer is equipped with three connections: one input for the mains power and two outputs for lighting. You can connect two lamps with this, provided the total power does not exceed 60 Watts (suitable for halogen or LED lamps).
Key features
Safe connection: Converts 220/240V to 12V for safe use in and around the pool.
Remote control included: Easily operate your pool lighting from a distance.
Multiple connections: 2 outputs for lamps, total maximum 60 Watts.
Universally applicable: Suitable for halogen and LED lamps.
Compact and reliable: Made of durable materials for long-term use.
The Vision wall sleeve creates a passage through a concrete pool wall for a suitable recessed component. You install the sleeve in the wall during construction, so the corresponding component can be connected at the desired position.
This version is intended for a concrete wall. Check beforehand which Vision component the sleeve is suitable for and whether the dimensions match the wall thickness and the planned pool lining.
Preparation during pool construction
A wall sleeve requires proper preparation. By fixing the position during construction, you take into account the required space on both sides of the wall and the accessibility of the connection.
Install the sleeve according to the installation instructions of the corresponding system. Correct alignment and proper sealing are important for a good connection to the final pool wall.
Matching the corresponding component
The Vision wall sleeve is a component of the recessed construction. Which connection and additional materials are required depends on the specific model and the component you are connecting it to.
Therefore, check the compatibility, length, and connection size before ordering. This information is not included in the provided product information.
Illuminate your pool with the warm white light of the VISION Pro WH. This compact LED pool light has a diameter of 50 mm and delivers a light output of 2000 lumens at a maximum power of 24 watts. The wide beam angle helps to distribute the light evenly and reduce shadow zones in the pool.
The light combines a resin-filled housing with practical mounting features. Thanks to the choice of suitable VISION cover plates, you can match the finish to the appearance of your pool. In combination with specific VISION wall fittings, an extremely flush installation is possible.
Warm white light with a wide spread
The WH version emits warm white light. This creates an inviting appearance when illuminating the pool in the evening. The wide beam supports even lighting of the water and the pool walls.
The required number of lights depends on the dimensions and shape of the pool, the placement, and the color of the liner. A dark pool liner generally requires more lighting to achieve a comparable brightness.
Resin-filled NoAir™ housing
The VISION Pro features the NoAir™ technology from House of DURATECH. The housing is filled with resin to prevent water infiltration and condensation formation inside the light. This design also helps to reduce internal light reflection.
The high-quality polymers used make the light suitable for pools with a salt electrolysis system. This means this version is also applicable when the pool water is treated via salt electrolysis.
Practical installation with QuickConnect™ and PressFit™
The light operates on 12 V AC and has a two-wire connection. With QuickConnect™, the power cables are connected via a connector with gold-plated contacts. The cables do not need to be stripped: the connection is made with self-tapping contact screws.
The PressFit™ mounting system helps the light fit neatly against the pool wall, even when the wall fitting is not placed completely perpendicular. The light can be installed in most 1½″ wall fittings. Check the compatibility of the chosen fitting and mounting components beforehand.
Choice of finish with ClickOn™
With the ClickOn™ system, you can easily exchange suitable VISION cover plates. This allows you to choose a finish that matches the color of the pool liner and the other built-in components.
With the right VISION wall fitting, the light can be mounted very flush against the wall. As a result, it protrudes very little and reduces the chance that the light will be used as a step.
Long stated LED lifespan
The LEDs have a stated lifespan of up to 50,000 hours. The actual lifespan depends on the conditions of use and correct installation. The light comes with a three-year warranty.
With the VISION Ultra Flat D50 installation kit, you can install a suitable pool light in combination with the Face Plate Ultra Flat and a 1.5″ VISION Wall Conduit. The system allows you to integrate the lighting into the pool wall and create a watertight connection with the liner.
The installation assembly consists of a polymer recessed flange, gaskets, and a stainless steel mounting ring. After finishing the wall, the light is clicked into the Face Plate Ultra Flat and then inserted into the wall conduit. This allows you to complete the lighting installation step by step during the construction of the pool.
Watertight connection to the liner
The polymer recessed flange is attached to the 1.5″ VISION Wall Conduit with a gasket. These components form the basis for the installation. The pool construction is then completed and the liner is installed.
On the pool side, the stainless steel mounting ring is placed on the liner, with a gasket in between. The ring is screwed into the polymer recessed flange. When installed correctly, this assembly ensures a watertight connection around the penetration.
Installation of the light and cover plate
Once the connection to the liner is completed, the suitable light is clicked into the Face Plate Ultra Flat. Then the entire assembly is inserted into the wall conduit.
Check beforehand whether the light, cover plate, and wall penetration are suitable for this D50 installation kit. The exact scope of delivery is not specified; therefore, check which components need to be ordered separately.
