Extend your swimming season in an eco-friendly way with the Intex Solar Mat. This clever solar collector uses solar energy to heat the water in your pool. By connecting the mat to your existing pool pump, the water is guided through the heat-retaining black mat, where it is naturally warmed by solar radiation. The heated water then flows back into the pool – simple, sustainable, and with no extra energy costs.
Whether you have a small or large pool, the Intex Solar Mat is modular: multiple mats can be connected to each other for a more powerful heating effect. Perfect for those looking for an affordable and energy-efficient solution to improve swimming comfort.
Quantity required per pool size
1 mat: For small pools up to Ø 305 cm or rectangular 300 x 200 cm
2 mats: For pools up to Ø 366 cm or 400 x 200 cm
3-4 mats: For larger pools up to Ø 457 cm or Oval 305 x 549 cm
5-6 mats: For very large pools up to Ø 549 cm or rectangular 274 x 549 cm
Please note: the number of mats required depends on both the pool size and the power of your filter pump.
Quantity required per filter pump type
1-2 mats: Intex cartridge filter pump 1,250 l/h
2-4 mats: Intex cartridge filter pump 2,270 l/h
3-5 mats: Intex cartridge filter pump 3,407 l/h
4-6 mats: Intex cartridge filter pump 5,678 l/h
4-5 mats: Intex sand filter pump 4,500 l/h
Conclusion
The Intex Solar Mat is the ideal choice for those who want to heat their pool in a sustainable and cost-effective way. With simple installation, no recurring energy costs, and expandability based on pool size and pump capacity, this solar heating system is perfect for any type of recreational pool. A smart step towards longer, warmer swimming pleasure – powered purely by the sun.
Are you done with swimming in cold water or are you looking for a sustainable solution to lower the energy costs for your pool? The Roth Heliopool solar collector is the ideal choice for eco-friendly and cost-efficient pool heating. This high-quality solar panel uses the sun's heat to keep your pool water at a pleasant temperature, allowing you to enjoy a warm swim for longer, even outside the peak season. The black color of the solar panel is not only aesthetically pleasing but also ensures that the panel absorbs maximum sunlight for a higher energy yield.
This solar collector is made of UV-resistant high-density polyethylene (PEHD), which means the panel is durable and resistant to the elements. You can easily install this solar collector on a flat roof, on the ground, or even on a pitched roof using the appropriate mounting sets. Thanks to the flexible connection options, you can link multiple panels depending on the size of your pool, and you won't have to worry about complex maintenance or high energy costs.
The Roth Heliopool solar collector is a perfect solution for heating pools without incurring additional energy costs. With this sustainable solar collector, you are not only investing in your own comfort but also contributing to a better environment.
Connections:
4 connections with 25 mm diameter
4 connections with 40 mm diameter
Suitable for direct water flow without an additional pump
Mounting options:
Mounting on flat roof, ground, or pitched roof
Recommended for use with Roth mounting rails and universal fastening sets
Are you done with swimming in cold water or are you looking for a sustainable solution to reduce your pool's energy costs? The Roth Heliopool solar collector is the ideal choice for eco-friendly and cost-efficient pool heating. This high-quality solar panel uses the sun's heat to keep the water in your pool at a pleasant temperature, allowing you to enjoy a warm swim for longer, even outside of peak season. The black color of the solar panel is not only aesthetically pleasing but also ensures that the panel absorbs maximum sunlight for higher energy yields.
This solar collector is made of UV-resistant high-density polyethylene (HDPE), which means the panel is durable and resistant to the elements. You can easily install this solar collector on a flat roof, on the ground, or even on a pitched roof using the appropriate mounting kits. Thanks to the flexible connection options, you can link multiple panels depending on the size of your pool, and you won't have to worry about complex maintenance or high energy costs.
The Roth Heliopool solar collector is a perfect solution for heating pools without incurring additional energy costs. With this sustainable solar collector, you are not only investing in your own comfort but also contributing to a better environment.
Connections:
4 connections with 25 mm diameter
4 connections with 40 mm diameter
Suitable for direct water flow without an additional pump
Mounting options:
Installation on a flat roof, ground, or pitched roof
Recommended for use with Roth mounting rails and universal fastening sets
The OKU solar collector type 1000 is a powerful, durable, and environmentally friendly way to heat your pool water using solar energy. This solar collector is perfect for both private pools and commercial applications, offering an affordable and efficient solution for heating pool water. The OKU solar collector works by capturing the sun's heat and transferring it to the water flowing through the collector, heating your pool in a natural and inexpensive way.
The OKU solar collector type 1000 features an integrated 40 mm manifold and two 25 mm connections, making it ideal as a corner piece in a solar panel system. This system can be expanded with type 1001 for multiple rows of solar collectors stacked vertically, or type 1002 for a single horizontal row of solar collectors. Thanks to the smart design, heat transfer to the pool water is optimal, while the PE (polyethylene) panels ensure frost resistance and durability.
This solar panel system is easy to install and offers a scalable solution: whether you need one panel or several, the OKU system can be customized to your specific pool needs. For optimal efficiency, it is recommended to use the solar collectors in combination with a good pool cover.
Conclusion
The OKU solar collector type 1000 offers an efficient, sustainable, and cost-effective way to heat your pool water. The system is easy to install, expandable, and provides high efficiency. Thanks to its robust construction and weather resistance, you can enjoy warm pool water for years to come with minimal maintenance costs. With the right cover and the installation of multiple solar collectors, you will get maximum performance out of this solar panel system, making it a smart choice for pool heating.
Enjoy a pleasant pool session for longer with the Solar Heating for Above-Ground Pools – Incr. 3ºC. This efficient heating system uses solar energy to raise your pool's water temperature in a natural and eco-friendly way. Ideal for pools with a capacity of 7.5 to 10 m³, where the temperature can rise by approximately 3°C. Thanks to its smart design, the heater can be optimally positioned for maximum effectiveness. Furthermore, it is possible to connect multiple units in series for larger pools.
With this solar pool heater, you can extend the swimming season and enjoy a more comfortable water temperature for longer!
The Solar Heaters offer high performance at an affordable price. Extend the swimming season by weeks with free solar heating for your pool water. No gas or electricity is required.
The heaters are easy to install (approx. 30 minutes) and therefore very suitable for (temporary) above-ground pools with an external pump
The Solar Heaters will heat your pool by ± 5 ˚C in a few days (depending on weather conditions)
Prepare your pool system for winter with this drain valve set for 50 mm PVC pipes. The drain valve allows you to drain any water remaining in the connected pipe section. This helps reduce the risk of frost damage when the system is out of use.
The set is intended, among other uses, for draining pipes in your pool's solar heating system. The lever makes it easy to open and close the valve.
Helps prevent frost damage
Water remaining in a pipe can expand when it freezes, causing damage to pipes or fittings. Draining the system before a frost period reduces this risk.
The drain valve makes it easier to drain the system, but does not automatically ensure that the entire system is free of water. Water may remain in bends, low pipe sections, or connected equipment. Therefore, also follow the winterization instructions for the other components.
Easy lever operation
Use the lever to operate the valve when draining and restarting the system. Install the drain valve in an easily accessible location where the water can drain away in a controlled manner.
For proper operation, the pipe section to be drained must be able to drain towards the drain point. The placement of the valve is therefore important for the result.
For 50 mm PVC pipes
This set is intended for use with 50 mm PVC pool pipes. It allows you to incorporate a drain point into the piping, for example in a solar heating system.
Before installation, check which fittings are required. The exact contents of the set and the type of connection fitting are not specified in the provided information.
Connect your solar heating system to your pool piping with this connection set for 50 mm PVC pipes. The set provides the transition between suitable solar collectors and the existing pool pipes. When installed correctly, it creates a sturdy, watertight connection that allows the pool water to flow through the heating system.
The connection set is practical for a new installation, but also for expanding or modifying an existing solar heating system. Check beforehand whether the connections on the collector side are suitable for your solar collectors.
Connection between solar heating and piping
A properly connected solar collector is part of the pool's water circulation. This set helps facilitate the transition to the 50 mm PVC piping.
Careful installation helps prevent leaks. When laying the pipes, take the pipe route into account and ensure that the connections are placed without tension. The final flow rate also depends on the pump, pipe length, and the layout of the installation.
Installation with PVC glue and cleaner
The PVC glue connections are installed using suitable PVC glue and cleaner. A clean, well-prepared connection is important for a reliable joint. Follow the processing instructions and allow the glue to cure sufficiently before pressurizing the installation.
Check beforehand which components are included in the set and which additional processing materials you need. It is not stated whether glue and cleaner are included.
Suitable for use around the pool
According to the provided product information, the materials are suitable for outdoor use and resistant to moisture and temperature differences. The set is therefore intended for use in solar heating installations around the pool.
Suitability for outdoor use does not mean that a water-filled connection is automatically protected against frost. Include the connections when winterizing the system and follow the solar heating system's instructions.
Connect compatible OKU Max Absorber solar collectors with this 38 x 5 x 100 mm connecting hose. The hose forms the water connection between the connection points of two collectors. Use the included hose clamps to secure both ends.
The short version is intended for collectors placed close together. This makes the hose a practical component for setting up, expanding, or maintaining your OKU solar heating system.
Connection between solar collectors
When combining multiple absorbers, the connections must be linked together. This hose is intended for compatible 38 mm connection points and allows the pool water to flow between the collectors.
Before installation, check that the connection size and the distance between the collectors match the hose. Ensure that the connection is installed without tension or kinks.
Includes hose clamps
The included hose clamps secure the hose to both connection points. Slide the hose sufficiently over the connections and place the clamps according to the system's installation instructions.
When installed correctly, a firm, watertight connection is created. Check the connection for leaks when you restore flow to the system.
Compact size
The hose has an inner diameter of 38 mm, a wall thickness of 5 mm, and a length of 100 mm. The short length keeps the connection between adjacent collectors compact.
For greater distances or different pipe routes, a different connection solution is required. Therefore, coordinate the placement of the absorbers in advance with the available connection space.
BUY 4 AND GET 1 FREEHeat your pool with the warmth of the sun using the OKU 2000 Max-Absorber solar collector. This solar collector has an absorption surface of 2 m² and directly transfers solar heat to the pool water flowing through it. This supports pool heating without fuel or an electric heating element.
The collector is connected to the pool's water circulation system. The pump circulates the water through the black plastic absorber, after which the heated water flows back into the pool. The heat output depends on the amount of sunlight, the placement, the outside temperature, and the number of connected collectors.
Pool heating with solar energy
The black absorption surface absorbs solar heat and transfers it to the water flowing past it. According to the provided product information, the efficiency can reach approximately 85% under favorable conditions.
The sun provides the heat, but a pump is still required for water circulation. Whether the existing filter pump has sufficient capacity depends on factors such as the pipe length, the height difference, and the arrangement of the collectors. Longer pump run times may cause additional electricity consumption.
Expandable to the size of your pool
The modular system makes it possible to combine multiple collectors. This allows you to match the total absorption surface to the size of the pool and the desired heating support.
As a guideline, an absorption surface of 50 to 80% of the water surface is recommended. For an 8 x 4 meter pool, this means 16 to 25.6 m² of absorption surface, or approximately 8 to 13 collectors of 2 m². The correct sizing also depends on the location, the use of a pool cover, and the desired water temperature.
Open connections of your choice
The OKU 2000 Max-Absorber has four connection points that are closed upon delivery. During installation, you only open the connections required for your setup, according to the installation instructions. Unused connection points remain closed, so no separate sealing caps are required.
The collector offers connection options for 25 and 38 mm. The corresponding hose sets are available separately. Before opening the connection points, check which pipe layout and connection size you will use.
Various placement options
The collectors can be placed on a suitable surface, a roof, or a support structure. According to the product information, a slanted or vertical arrangement is also possible.
Choose a location with sufficient sunlight and as little shade as possible. The orientation and tilt angle affect the heat output. Coordinate the mounting, support, and pipe layout with the installation instructions, and take into account the weight of the water-filled installation.
Plastic suitable for use with pool water
The absorber is made from a single piece of plastic and is produced in Germany according to the product information. The material is intended for use with chlorinated and salt-containing pool water, within the manufacturer's permitted water parameters.
The stated temperature resistance of the material is −50 to +115 °C. Always follow the installation instructions for winterizing and, if necessary, draining the installation. Resistance to low temperatures does not automatically mean that a complete, water-filled installation can survive winter without measures.
Can be combined with a solar control system
With a suitable differential temperature control system, you can automate the heat utilization. This compares the temperature of the collector with that of the pool water and, depending on the installation, activates a pump or valve when heating is beneficial.
This helps prevent water from flowing through a colder collector and thereby losing heat. A pool cover is a useful addition to retain the accumulated heat for longer.
Protect your pool solar heating system against negative pressure with this ventilation valve set for 50 mm PVC pipes. The valve allows air in when the pressure in the piping drops, for example when the pool pump stops and water flows back from higher-placed solar collectors. This helps the set limit unnecessary stress on the collectors and pipes.
The set is intended for solar heating systems where pool water is pumped through collectors. The pump itself does not need to run on solar energy for this: the solar collectors provide the heat, while the pump ensures water circulation.
Allows air in during negative pressure
Solar collectors are often placed on a roof or elevated structure. When the pump stops, flowing-back water can cause negative pressure. The ventilation valve then allows air to flow into the system to limit this negative pressure.
The function is therefore to ventilate the installation. This is not the same as an automatic air vent that removes trapped air from a filled system.
Supports draining the installation
By allowing air in, the valve can support the draining of collectors and pipes designed for this purpose. This only works when the pipe layout and the other components allow it.
The ventilation valve therefore does not replace a drain valve and does not guarantee that the entire installation will be free of water. When preparing for winter, also follow the instructions for the solar collectors and check if water remains in low pipe sections.
Connection to 50 mm PVC piping
The set is intended for PVC pipes with a diameter of 50 mm. The black PVC connection components make it possible to incorporate the ventilation valve into the solar heating piping.
Carefully prepare glued connections with suitable cleaning and adhesive products. Observe the prescribed curing time before putting the installation back into use. Then check the connections for leaks.
Placement tailored to the system
The mounting height and position are important for proper operation. With higher-placed collectors, the valve is usually incorporated into the high part of the installation. The exact position and mounting direction must comply with the instructions for the valve and the solar heating system.
Keep the valve accessible for inspection and ensure that the air opening remains unobstructed. Before installation, also check the pipe size and suitability for your collector setup.
The OKU solar collector type 1002 is a key component of the modular OKU solar collector system. This system provides an efficient, sustainable, and affordable way to heat your pool water using solar energy. The type 1002 solar collector functions as an intermediate or end panel and is specifically designed for horizontal rows of solar collectors. In combination with type 1000 (corner piece) and type 1001 (middle panel for multiple rows), the system can be expanded to the desired size, making it suitable for both private and commercial pools.
The OKU solar collector type 1002 is designed to provide maximum heat transfer to the pool water. The water flows directly through the collector, where it is heated by the sun. The solar collector is made of sturdy polyethylene (PE) and is not only resistant to extreme temperatures but also frost-proof and walkable. This ensures a long service life and minimal maintenance costs.
The collector is easy to install in various locations, such as on a roof, on a rack next to the pool, or against a vertical wall. For optimal efficiency, it is recommended to combine the solar collectors with a good pool cover so that the generated heat is retained in the pool.
Conclusion
The OKU solar collector type 1002 is an efficient and durable solution for heating your pool using solar energy. The panel is specially designed for horizontal installations and delivers high performance with an efficiency of up to 85%. Thanks to the sturdy, weather- and frost-resistant construction, the system is long-lasting, while the installation is simple and scalable to the size of your pool. This makes the OKU solar collector type 1002 an excellent choice for both private and commercial pools looking for an environmentally friendly and cost-effective way to heat their pool water.
The OKU solar collector type 1001 is an essential component of the OKU solar collector system, which efficiently heats your pool water using solar energy. This solar collector functions as an intermediate panel and, together with type 1000 (corner piece) and type 1002 (intermediate piece for horizontal rows), ensures a fully scalable and expandable system. The system is ideal for both private swimming pools and commercial applications, offering an environmentally friendly and cost-effective solution for heating pool water.
The OKU solar collector type 1001 is designed to provide maximum heat output through full flow of the pool water. The panel is made of sturdy polyethylene (PE) and is both frost-resistant and walkable. This means it is not only resistant to extreme temperatures (from -50°C to +115°C), but also durable enough to last for many years, even with intensive use.
The system is easy to install and can be placed in various locations, such as on a roof, a rack next to the pool, or against a wall. For optimal performance, it is recommended to combine the solar collectors with a good pool cover so that the heat generated by the solar collectors is retained in the pool water.
Conclusion
The OKU solar collector type 1001 offers an efficient and sustainable way to heat your pool water using solar energy. It is an essential intermediate panel within the OKU system and works optimally in combination with the other types of solar collectors (type 1000 and 1002). The system is weather- and frost-resistant, easy to install, and ideal for anyone looking for an environmentally friendly and affordable pool heating solution. By using the right cover and multiple panels, maximum efficiency can be achieved, resulting in a wonderfully warm pool all year round.
The Intex Solar Mat offers an environmentally friendly and cost-effective solution for heating your pool water using solar energy. This innovative and compact pool heater uses the sun's heat to gradually warm up the water in your pool, allowing you to enjoy pleasant swimming water without high energy costs. Thanks to its compact design, the Solar Mat takes up little space, leaving plenty of room in your garden for other activities.The Solar Mat is easily placed between the filter pump and the return line to the pool. As soon as the sun shines on the mat, the water flowing back to the pool is heated, contributing to warming the pool to a comfortable temperature. Under ideal conditions, the water can be heated by up to 3°C per day. The exact warming, however, depends on factors such as sun intensity, the location and orientation of the Solar Mat, and the initial water temperature.The Intex Solar Mat is an ideal solution for pool owners who want to heat their water in an environmentally friendly and cost-efficient way. Thanks to its compact design and simple installation, the Solar Mat offers a practical way to extend the swimming season without extra energy costs.
Solar heating for your swimming pool
No gas or electricity required
For pools up to 7,000 litres
Range can be increased by connecting multiple domes together
Temperature increase of approximately 1.0 - 2.0 degrees per 7,000 litres with 8 hours of sunshine
Water flow rate of 7,500 l/h
The Solar Heater Dome offers high performance at an affordable price. Add weeks to the swimming season with free solar heating for your pool water. No gas or electricity is required. The dome is easy to install (approximately 30 minutes) and therefore very suitable for (temporary) above-ground pools with an external pump. You can easily increase heating efficiency by connecting the Heaters in series. The Solar Heater Dome heats your pool by ± 5 ˚C in a few days (depending on weather conditions). Attach to where the filter system is connected. Dimensions: 57 x 57 cm and 32 cm high (capacity 5 litres)
- 120 cm hose, connectors and clamps- Extra hose for connecting multiple Heaters if necessary- Adjustable legs to easily aim the Heater towards- the sun- Suitable for pools up to 7,000 litres (for a- pool of 21,000 litres, 3 domes are required- Water flow up to max. 7,500 l/h- Incl. protective cover- Ø 32 and Ø 38 mm connection
This solar heater raises the swimming pool water temperature up to 5 °C above the ambient temperature. You can easily connect this solar heater to a Gre filter pump or sand filter. Thanks to its compact design, the solar heater takes up little space. The heater can also be used as an extension set for existing solar heating systems and requires a pump with a minimum capacity of 4 m³/h.Specifications:Color: blackMaterial: polypropyleneMat dimensions: 600 x 60 cmThickness: 0.9 mmWeight: 10 kgsuitable for swimming pools up to 20 m³.
