Beatbot AquaSense 2 pool robot

The Beatbot AquaSense 2 is an advanced, fully cordless pool robot for those who want their pool cleaned thoroughly without the hassle of cables. The robot combines floor, wall, and waterline cleaning into one intelligent device and is suitable for pools with a floor surface area of up to approximately 300 m².

With a powerful 10,000 mAh lithium-ion battery, a 4-motor system, 16 intelligent sensors, ultrasonic obstacle detection, and CleverNav™ navigation, the AquaSense 2 independently determines an efficient route through the pool. As a result, the robot doesn't just move around randomly, but attempts to clean the available surfaces as systematically as possible.

Furthermore, you don't need to fish around on the bottom to find the robot after cleaning. Thanks to the smart parking function, the AquaSense 2 returns to the water surface, allowing you to easily remove it from the pool.

Complete 3-in-1 cleaning

The Beatbot AquaSense 2 has been developed as a 3-in-1 pool robot and cleans the three most important surfaces of the pool.

Floor cleaning: the robot moves independently across the pool floor and vacuums up sand, leaves, hair, insects, and other debris.

Wall cleaning: thanks to its powerful drive, the AquaSense 2 can climb suitable pool walls and actively clean them.

Waterline cleaning: the often-soiled edge around the waterline is also addressed.

Unlike the AquaSense 2 Pro, the standard AquaSense 2 does not actively clean the water surface. If you also want floating leaves and insects removed automatically, you should consider the Pro version.

Dual-pass waterline cleaning

A visible line of dirt can quickly form, especially around the waterline. That is why Beatbot has equipped the AquaSense 2 with Dual-Pass Waterline Scrubbing.

When the robot cleans the waterline, it is treated twice during every pass. This gives the robot more opportunity to brush away dirt and deposits.

This makes the AquaSense 2 particularly interesting for pool owners who do not want to go over the waterline with a pool brush themselves every few days.

Powerful 4-motor system

The AquaSense 2 features 4 motors that collectively provide propulsion, maneuverability, and powerful water circulation.

The maximum stated suction capacity is 5,500 GPH. This allows the robot to process a large volume of pool water while drawing debris toward the filter basket.

The powerful drive also assists with climbing pool walls.

Up to 4 hours of floor cleaning

An important difference compared to many smaller cordless pool robots is the large 10,000 mAh battery.

This allows the AquaSense 2 to continuously clean the pool floor for up to approximately 4 hours. For combined cleaning of walls and the waterline, the maximum runtime is around 3.5 hours.

This gives the robot sufficient capacity to handle even larger private pools in a single cleaning session.

The actual runtime depends on factors such as the selected cleaning mode, pool shape, debris level, water temperature, and pool conditions.

For pools up to approx. 300 m²

Thanks to its large battery and intelligent navigation, the AquaSense 2 can be used for pools with a floor surface area of up to approximately 300 m².

For common private pools measuring, for example, 6 x 3, 8 x 4, or 10 x 5 meters, this means the robot has more than enough capacity.

Even in larger pools, this means the robot does not need to be constantly recharged in between.

CleverNav™ intelligent navigation

The AquaSense 2 does not simply move randomly through the pool.

Beatbot uses CleverNav™ to optimize the cleaning route. The system processes information from the sensors and uses it to adjust the robot's movements.

This allows the AquaSense 2 to attempt to clean the pool systematically, while minimizing unnecessary movements and missed areas as much as possible.

SonicSense™ with 16 sensors

For navigation, the AquaSense 2 utilizes SonicSense™.

The robot is equipped with a total of 16 precision sensors, including 2 ultrasonic sensors. These help the robot recognize its environment and obstacles.

All gathered information is processed during cleaning to continuously optimize the route.

This is particularly useful for pools with corners, curves, and unusual shapes.

Powerful quad-core processor

To process sensor information quickly, the AquaSense 2 features a quad-core Cortex-A7 1.8 GHz processor.

The processor works in tandem with the navigation software to determine the robot's position and movements.

This allows the AquaSense 2 to react quickly to changes in its environment while cleaning.

Filtration down to 150 microns

The vacuumed debris is collected in a filter basket with a capacity of approximately 2 liters.

The filtration system has a fineness of 150 microns, making it suitable for collecting, among other things:

Leaves
Insects
Hair
Sand
Small debris particles
Organic matter

The filter basket is accessible from the top. This means you do not have to laboriously disassemble the pool robot after a cleaning cycle.

Open the top, remove the filter basket, and rinse it thoroughly with water.

305 mm cleaning width

The AquaSense 2 has a cleaning width of approximately 305 mm.

This allows the robot to cover a significant portion of the pool floor with every pass.

In combination with the intelligent route planning, this helps to clean large pools efficiently.

Special guide wheels

For precise movements along edges and corners, the AquaSense 2 is equipped with special guide wheels.

These assist the robot with turning and positioning while simultaneously protecting against unnecessary collisions with the pool wall.

This contributes to controlled navigation through the pool.

Automatic surface parking

One of the most convenient features of the AquaSense 2 is the automatic surface parking function.

When a cleaning program has finished or the battery is low, the robot can move itself to the water surface.

This means you do not have to search for a robot on the pool floor with a hook or long pole.

Once the robot is at the surface, you can easily grab it and remove it from the pool.

Parking at the touch of a button

In addition to automatic parking, you can use the Beatbot app to command the AquaSense 2 to come to the water surface.

This is useful, for example, if you want to finish the cleaning early.

You therefore do not have to wait until the entire cleaning cycle is complete.

SmartDrain™ automatic water drainage

When removing a robot from the pool, the remaining water can cause significant extra weight.

That is why the AquaSense 2 features SmartDrain™.

As soon as you lift the robot out of the water, the water inside is drained quickly. This makes the robot easier to handle.

With a dead weight of approximately 10.47 kg, this is a handy addition.

5 different cleaning modes

The Beatbot AquaSense 2 features 5 cleaning modes.

These allow you to tailor the cleaning to what the pool needs at that moment. For example, you don't always have to have all surfaces cleaned when, for instance, only the floor needs attention.

This helps to use the available battery capacity efficiently.

Fully cordless

The AquaSense 2 operates entirely on its built-in battery.

Therefore, there is no power cable running through the pool during cleaning.

This has several advantages: the robot has more freedom of movement, no cable can tangle around the robot, and there is no long cable lying over the pool edge while cleaning.

Cordless cleaning is especially practical for larger and irregularly shaped pools.

Wireless charging station

Charging is also simple.

After use, you place the AquaSense 2 on the vertical wireless charging station. The battery is then charged without needing to plug a charging cable directly into the robot every time.

A full charge takes approximately 4 hours.

After that, the 10,000 mAh battery is ready again for an extensive cleaning cycle.

Control via the Beatbot app

The AquaSense 2 can be connected to the Beatbot app and supports Wi-Fi and Bluetooth.

Via the app, you can manage settings and cleaning functions, view information about the robot, and activate the parking function when the robot is at the surface.

Furthermore, the robot supports OTA software updates. This allows the device's software to be updated without requiring physical modifications.

Suitable for various pool shapes

The AquaSense 2 is not only suitable for standard rectangular pools.

You can use it in, among others:

• Rectangular pools
• Round pools
• Oval pools
• Kidney-shaped pools
• Freeform pools

The intelligent navigation adapts to the environment.

Various pool surfaces

The AquaSense 2 is also broadly applicable in terms of pool lining.

The robot has been developed for, among others, concrete, ceramic tile, vinyl, and fiberglass pools.

Actual performance on walls remains dependent on the pool's construction and conditions. An extremely slippery wall or an unusual transition between floor and wall, for example, may influence climbing ability.

Also suitable for saltwater pools

The Beatbot AquaSense 2 can also be used in a saltwater pool.

Beatbot specifies a maximum salt concentration of 5,000 ppm for this.

As a result, the robot can also be used in many private pools that utilize a salt electrolysis system.

Durable IMR coating

The housing is finished with an automotive-grade IMR coating.

This finish was developed to make the exterior more resistant to, among other things, sunlight and heat, and helps keep the robot looking clean for a long time.

This is especially important for a pool robot that is regularly exposed to sunlight during the season.

Powerful cordless pool robot for daily convenience

The Beatbot AquaSense 2 is an excellent choice for those looking for a high-quality cordless pool robot but who do not need the extensive surface cleaning of the AquaSense 2 Pro.

With floor, wall, and waterline cleaning, a powerful 10,000 mAh battery, 4 motors, 16 sensors, 150-micron filtration, and intelligent CleverNav™ navigation, the AquaSense 2 has everything needed to largely take over the daily cleaning chores of a private pool.

Add to that smart features such as automatic surface parking, SmartDrain™, app control, and wireless charging. The result is a powerful pool robot designed primarily for one goal: as little manual cleaning work as possible and as much time as possible to enjoy the pool.