Wybot C2 Pro pool robot

The WYBOT C2 Pro is a powerful cordless pool robot for cleaning the floor, walls and waterline. Thanks to the built-in battery, the robot works in the pool without a power cable. This gives it a great deal of freedom of movement and ensures that no cable is left lying around the pool while cleaning.

The pool robot is equipped with three motors, a suction power of 11.5 m³ per hour, and a dual filter system. The first filter captures leaves, insects, hair, and other larger debris. The additional ultra-fine filter traps smaller particles, so that fine dust and settled dirt are also better removed from the pool water.

Using its gyroscope and ultrasonic sonar technology, the C2 Pro determines its position and adapts its route to the shape of the pool. Via the WYBOT app, you get access to additional settings, cleaning programs, and path selections. The robot is suitable for pools with various shapes and common linings.

Cordless cleaning without a cable in the pool

The WYBOT C2 Pro runs entirely on a rechargeable lithium-ion battery. You therefore do not need to connect a floating power cable. This simplifies use and prevents a cable from tangling during cleaning or restricting the robot's freedom of movement.

Depending on the selected cleaning mode, the robot can run for approximately 2 hours in a standard program. In an economical floor program, the maximum runtime according to the product documentation can reach up to approximately 3 hours. As a result, the C2 Pro is suitable for both a full cleaning session and several shorter maintenance cycles.

After use, the robot is removed from the water and charged on dry land. A full charge takes approximately three hours.

Cleaning of floor, walls and waterline

The C2 Pro can clean several parts of the pool:

• Floor cleaning: for sand, leaves, hair, and settled dirt on the pool floor.

• Wall cleaning: the robot climbs up suitable pool walls.

• Waterline cleaning: removes dirt that accumulates along the edge of the water.

• Combined cleaning: cleans the floor and walls during the same cycle.

• Targeted programs: additional programs and movement patterns can be selected via the app.

Three basic programs can be selected on the robot itself: floor, walls, or floor and walls. For more extensive settings, the WYBOT app is used.

Actual climbing capability depends on the shape of the pool, the incline angle, the lining, water quality, and the amount of dirt on the surface.

Navigation with gyroscope and sonar

The pool robot combines a gyroscope with ultrasonic sensors. This technology helps the robot to recognize distances, walls, and changes in the pool environment. Based on this, it adjusts its driving direction and cleaning route.

Different movement patterns for the floor and walls can be chosen via the app. This helps to tailor the route to the shape of the pool. The manufacturer lists several route patterns, though the number available may vary by software version.

The navigation makes the cleaning more systematic, but does not form a complete three-dimensional map like some robots with a camera system. The C2 Pro has no AI camera; that feature belongs to the separate C2 Pro Vision model.

Dual filter system

The WYBOT C2 Pro has a dual filter system:

1. A filter basket with a mesh size of 180 microns for coarser dirt.

2. An additional ultra-fine filter for smaller dirt particles.

This combination makes the robot suitable for daily debris like leaves and insects, but also for finer dust that settles on the pool floor.

The filter basket is accessible from the top. After a cleaning session, the basket can be removed from the robot and rinsed out with clean water. Regular cleaning of the filters is important to maintain suction power and water flow.

Operation with the WYBOT app

Via the WYBOT app, you can set the available cleaning options. Depending on the installed software, the following programs are available, among others:

• Floor

• Walls

• Waterline

• Walls and floor

• Full pool

• Turbo floor cleaning

• Eco

• Expert

The app also provides access to additional settings, route patterns, and software updates. Thanks to OTA updates, the robot's software can be updated whenever the manufacturer makes improvements available.

The wireless connection is primarily intended for configuring the robot before it enters the water or while out of the water. Radio signals have only a limited range underwater. Therefore, the C2 Pro does not feature full live remote control that would allow you to steer it manually anywhere underwater.

Distributed cleaning cycles

The available battery capacity can be divided over multiple cleaning sessions. European product information mentions, among others, the following settings:

• 1 cycle of 120 minutes

• 2 cycles of 60 minutes

• 3 cycles of 40 minutes

• 4 cycles of 30 minutes

This allows the robot to perform maintenance at various times without you having to reselect a program for every short cycle. The exact timer settings may differ per firmware version or product series.

Suitable for various pools

According to the manufacturer, the WYBOT C2 Pro is suitable for diverse pool types and common pool linings. It can be used in rectangular, round, oval, and free-form pools.

The European product page mentions a recommended pool surface area of up to approximately 200 m². Other document versions mention lower surface areas. For the best result, the robot must have sufficient time to reach the entire pool. In the case of a very large pool, many obstacles, or a lot of dirt, multiple cleaning sessions may be required.

Contents of the packaging

• WYBOT C2 Pro pool robot

• Charger

• 180-micron filter basket

• Ultra-fine filter

• Floating components

• Retrieval hook

• User manual

• Quick start guide

Conclusion

The WYBOT C2 Pro is a versatile pool robot for pool owners who want to have the floor, walls, and waterline cleaned cordlessly. The combination of three motors, a suction capacity of 11.5 m³ per hour, sonar-assisted navigation, and dual filtration makes it suitable for regular maintenance of medium and large pools.

The app offers more configuration options than the controls on the device itself, while the timer function makes multiple short maintenance sessions possible. Those looking for a model with a built-in camera and visual dirt recognition should specifically choose the WYBOT C2 Pro Vision.