Keep your pool water at temperature for longer while limiting evaporation and contamination with the GRE Oval Summer Cover 605 x 370 cm. This insulating summer cover has been specially developed for oval pools of 610 x 375 cm and floats directly on the water surface.
The cover has an actual size of 605 x 370 cm. This allows it to fit within the pool walls of a pool with a nominal size of 610 x 375 cm. Thanks to the bubble profile, the cover remains floating on the water and forms an insulating layer between the pool water and the outside air.
The GRE summer cover helps retain accumulated heat better, limits the amount of coarse dirt that ends up in the water, and can reduce water evaporation by approximately 50% during the swimming season.
Specially for oval pools of 610 x 375 cm
This GRE summer cover has been developed for oval pools with a nominal size of:
610 x 375 cm
The actual dimensions of the cover are:
605 x 370 cm
The difference is intentional. A summer cover is not stretched over the outer edge of the pool, as is the case with a winter cover. The summer cover is laid directly on the pool water and floats within the pool walls.
As a result, the cover is slightly smaller than the nominal pool size.
Helps maintain water temperature for longer
During warm and sunny days, pool water can heat up significantly. Without a cover, a portion of this accumulated heat is lost, especially during cooler evenings and nights.
The GRE insulating cover forms an extra layer between the water and the outside air. This limits heat loss and keeps the pool water at temperature for longer.
This is especially interesting when you heat the pool with a pool heat pump. By covering the pool when no one is swimming, the heat pump has to replenish less lost heat.
Less evaporation of pool water
An open pool can lose quite a bit of water through evaporation during warm and windy periods.
By covering the water surface, the direct contact between the pool water and the outside air is greatly reduced.
GRE indicates that the use of a cover during the high season of about four months can result in approximately 50% less water evaporation.
This means you have to top up the pool less often, and at the same time, less heat is lost through evaporation.
Keeps coarse dirt out of the pool better
In addition to its insulating effect, the summer cover helps to keep the pool water cleaner.
Leaves, insects, and other larger dirt particles largely remain on the surface of the cover instead of ending up directly in the pool water.
This reduces the load on the skimmer and filter system and leaves you with less cleaning work.
Small dirt can of course still end up in the pool. A summer cover therefore does not replace normal filtration and water treatment.
180-micron thick polyethylene
The GRE summer cover is made of polyethylene and has a thickness of 180 microns (180 µ).
The material is light and flexible, making the cover easy to place on the water and remove again during the swimming season.
The blue color also matches the pool water beautifully.
Floats directly on the pool water
The summer cover does not need to be attached to the pool wall.
You simply lay it directly on the water surface. The cover then floats and follows the water level of the pool.
This makes daily use considerably easier than a winter cover that has to be secured around the pool structure with cables or other mounting materials.
When you want to swim, you remove the cover. After swimming, it can be rolled back out over the water.
Ideal in combination with a pool heat pump
Do you have a heat pump connected to your GRE pool? Then a good cover is a very useful addition.
A heat pump adds heat to the pool water, but without a cover, a significant portion of it can be lost again through evaporation and cooling at the water surface.
By covering the pool when it is not in use, the heat is better retained. This means the heat pump has to replenish lost heat less often.
This can help reduce the energy consumption for pool heating.
Easy to use daily
Because this cover is intended for use during the swimming season, ease of use is important.
The light polyethylene makes it relatively easy to place the cover on the water and remove it again.
With a cover over 6 meters long, the use of a suitable reel system can make placing and removing it even easier.
Difference between a summer cover and a winter cover
A summer cover and winter cover have different functions.
This 605 x 370 cm GRE summer cover floats directly on the pool water and is mainly intended to retain heat, reduce evaporation, and keep out coarse dirt during the swimming season.
A winter cover is stretched over the entire pool structure and is intended to cover the pool over a longer winter period.
For a GRE pool of 610 x 375 cm, this summer cover is therefore mainly suitable for daily use during the swimming season.
What is included?
You will receive:
GRE isothermal oval summer cover
Size 605 x 370 cm
Suitable for oval pools of 610 x 375 cm
No mounting cables or tensioners are required to use the summer cover. The cover floats directly on the pool water.
Give your swimming pool the right protection during the summer months with this high-quality summer cover for the Orange wooden swimming pool. This cover is specially designed for oval swimming pools with internal dimensions of 755 x 456 cm and is suitable for various pool types such as wooden, steel, composite, and even inflatable or tubular swimming pools.
Thanks to the integrated air bubbles, this cover offers excellent thermal insulation, allowing the pool water to warm up faster during the day from sunlight and stay warm longer at night. Furthermore, the cover prevents leaves, insects, and other debris from getting into the pool, which significantly reduces maintenance.
Give your pool the right protection during the summer months with this high-quality summer cover for the Safran 2 wooden pool. This cover is specially designed for oval pools measuring 620 x 395 cm and is suitable for various pool types such as wooden, steel, composite, and even inflatable or tubular pools.Thanks to the integrated air bubbles, this cover offers excellent thermal insulation, allowing the pool water to heat up faster during the day from sunlight and stay warm longer at night. Furthermore, the cover prevents leaves, insects, and other debris from entering the pool, which significantly reduces maintenance.
Enjoy pleasantly warm pool water for longer with the W'eau Solar Cover Rectangular 450 x 220 cm in black/blue! This practical solar cover helps retain heat in your pool, reduces heat loss during cooler nights, and limits the evaporation of pool water. This allows you to enjoy a comfortable water temperature for longer and get more out of your pool season.
The W'eau Solar Cover is specially designed for rectangular pools with dimensions of 450 x 220 cm. Thanks to the actual cover size of 433 x 202 cm, the cover fits within the pool edges and can float directly on the water surface.
Keep your pool water warm for longer
A pool loses a lot of heat through the water surface, especially at night and on days with lower outdoor temperatures. With the W'eau Solar Cover, you reduce this heat loss in a simple and energy-efficient way.
The solar cover consists of a bubble structure that floats on the water surface. This creates an insulating layer between the pool water and the outside air.
The main benefits of this are:
Less heat loss during cold nights.
Better heat retention during the pool season.
Lower energy consumption when using a pool heat pump.
Less evaporation of pool water.
A more pleasant water temperature while swimming.
Black/blue version for optimal heat retention
The W'eau Solar Cover has a black/blue color combination. The dark version helps absorb sunlight, while the bubble structure supports heat transfer and insulation.
With sufficient sunlight, a solar cover can help warm the pool water. The actual temperature gain depends on the weather conditions, the amount of sunlight, the outdoor temperature, and the pool volume.
The main benefit is that the accumulated heat is lost more slowly when the pool is not in use.
Less evaporation and lower water consumption
In addition to retaining heat, the W'eau Solar Cover helps limit the evaporation of pool water.
Especially during hot summer days and windy conditions, an uncovered pool can lose a considerable amount of water. By covering the pool when you are not swimming, you need to refill it less often.
This can also help reduce the consumption of pool chemicals, as less water evaporates and less fresh water needs to be added.
Ideal in combination with a pool heat pump
Do you use a pool heat pump to keep the water at the right temperature? Then a solar cover is a valuable addition.
Without a cover, a large part of the accumulated heat can be lost through the water surface. With the W'eau Solar Cover, you limit this heat loss, so the heat pump needs to reheat the pool less often to maintain the desired temperature.
This makes the cover particularly attractive for pool owners who want to reduce their energy costs.
Perfect fit for rectangular pools
The W'eau Solar Cover is suitable for rectangular pools with nominal dimensions of 450 x 220 cm.
The cover itself has dimensions of 433 x 202 cm. This slightly smaller size ensures that the cover can float on the water surface within the pool edges.
Please note: the stated pool size and cover size are not the same. Therefore, always check the inner dimensions of your pool before ordering the cover.
Easy to use
The W'eau Solar Cover is particularly easy to use. Lay the cover directly on the water surface with the bubbles facing down. The cover floats independently and forms an insulating layer.
When you want to swim, simply remove the cover from the pool. After use, you can put it back to limit heat loss and evaporation.
Store the cover away from direct sunlight when it is not on the water and prevent prolonged exposure to concentrated pool chemicals.
Why choose the W'eau Solar Cover 450 x 220 cm?
With the W'eau Solar Cover Black/Blue, you choose a simple and effective way to enjoy warm pool water for longer. The cover helps reduce heat loss, limits evaporation, and is an excellent addition to a pool heating system.
Thanks to the rectangular shape and the custom cover size of 433 x 202 cm, it is a practical solution for pools measuring 450 x 220 cm.
Get more out of your pool season, save on heating costs, and enjoy comfortable pool water for longer with the W'eau Solar Cover!
Important: a solar cover is not a safety cover and offers no protection against drowning. Always remove the cover completely before anyone uses the pool.
The 260 x 160 cm version with a cover size of 248 x 144 cm is perfect for compact to medium-sized pools. This solar cover provides efficient coverage of the water surface and helps to keep the temperature stable.
The combination of insulation and protection makes this cover a practical choice. During the day, heat is captured, and it is retained at night, making you less dependent on additional heating.
In addition, the cover prevents dirt, leaves, and insects from entering the water, which ensures a cleaner pool with less maintenance.
The W’eau solar cover 975 x 488 cm has been specially developed for large swimming pools and helps you make the most of your swimming season. With a cover size of 960 x 466 cm, this cover sits perfectly on the water surface, keeping heat loss to a minimum.
This solar cover is made of 200-micron thick polyethylene, which provides a solid insulation layer. During the day, the cover absorbs heat, and at night, it prevents this heat from escaping. As a result, the water remains noticeably warmer for longer, even in lower outdoor temperatures.
The black underside limits the amount of light that reaches the water, which helps to prevent algae growth. The blue top side provides a classic look and makes the cover easier to see and handle.
In addition, this cover significantly reduces evaporation, which means you need to top up the water less often and chemicals such as chlorine remain more stable.
The W’eau Premium solar cover round 460 cm is the ideal solution to heat your pool water faster and keep it warm for longer. This version has a cover size of 454 cm, which makes it a perfect fit for a 460 cm pool, allowing it to float optimally on the water without being too large.
What sets this solar cover apart is the extra thick 500-micron quality. This is significantly thicker than standard summer covers and ensures maximum insulating performance. In combination with the fully black top and bottom, sunlight is optimally absorbed and converted directly into heat. As a result, the water temperature rises faster and is better retained at night.
In addition, the black material barely lets any light through, which significantly reduces algae growth. This makes the cover not only effective, but also low-maintenance.
Perfect in combination with a heat pump: the cover prevents heat loss and significantly increases efficiency.
The W’eau Premium solar cover round 400 cm is the ideal solution to heat up your pool water faster and keep it warm for longer. This version has a cover size of 394 cm, making it the perfect fit for a 400 cm pool and ensuring it floats optimally on the water without being too large.
What sets this solar cover apart is the extra-thick 500-micron quality. This is significantly thicker than standard summer covers and provides a maximum insulating effect. Combined with the fully black top and bottom, sunlight is optimally absorbed and converted directly into heat. As a result, the water temperature rises faster and is better retained at night.
In addition, the black material barely lets any light through, which significantly reduces algae growth. This makes the cover not only effective, but also saves on maintenance.
Perfect in combination with a heat pump: the cover prevents heat loss and significantly increases efficiency.
The W’eau Premium solar cover round 350 cm is the ideal solution for heating your pool water faster and keeping it warm longer. This version has a cover size of 344 cm, making it a perfect fit for a 300 cm pool and ensuring it floats optimally on the water without being too large.
What sets this solar cover apart is its extra-thick 500-micron quality. This is significantly thicker than standard summer covers and provides maximum insulating performance. In combination with the fully black top and bottom, sunlight is optimally absorbed and converted directly into heat. As a result, the water temperature rises faster and is better maintained at night.
In addition, the black material barely lets any light through, which greatly reduces algae growth. This makes the cover not only effective but also low-maintenance.
Perfect in combination with a heat pump: the cover prevents heat loss and significantly increases efficiency.
The W’eau Premium solar cover round 300 cm is the ideal solution for heating your pool water faster and keeping it warm for longer. This version has a cover size of 294 cm, which makes it a perfect fit for a 300 cm pool, allowing it to float optimally on the water without being too large.
What sets this solar cover apart is the extra-thick 500-micron quality. This is significantly thicker than standard summer covers and provides a maximum insulating effect. In combination with the fully black top and bottom, sunlight is optimally absorbed and converted directly into heat. As a result, the water temperature rises faster and is better retained at night.
In addition, the black material barely allows any light to pass through, which greatly reduces algae growth. This makes the cover not only effective but also low-maintenance.
Perfect in combination with a heat pump: the cover prevents heat loss and significantly increases efficiency.
This summer cover is specially designed for round composite swimming pools with an outer diameter of 410 cm. The cover itself has a diameter of 361 cm, allowing it to float on the water surface, thereby retaining heat and keeping out debris.
The cover is made of UV-resistant bubble wrap (400 microns). During the day, it stores heat from the sun, and at night, it limits heat loss. Furthermore, the cover reduces water evaporation by up to 50%, which saves on water and chemical consumption. Simple to use: the cover floats loosely on the water surface and is easy to put on or remove while swimming.
The isothermal cover for oval pools measuring 730 x 375 cm is a practical and efficient solution for keeping your pool water clean and warm. This summer cover floats directly on the water surface and ensures that the water temperature is better maintained, both day and night. This not only helps to stabilize the water temperature, but also reduces water evaporation by up to 50% during the high season.
The cover also acts as a protective layer against dirt and leaves, keeping your pool cleaner for longer without needing to spend extra time on maintenance. The dimensions of 725 x 370 cm and the thickness of 180 microns make this cover suitable for various types of pools, including inflatable and tubular models, thereby covering a wide range of pool needs.
Thanks to the user-friendly design, the cover can be applied or removed quickly and easily, making it a convenient accessory for daily use during the swimming season.
Conclusion:
The isothermal cover for oval pools of 730 x 375 cm is a practical solution for pool owners who want to keep their pool water clean and warm during the swimming season. With its ability to reduce water evaporation and keep the water temperature stable, this cover offers a combination of ease of use and functionality. Despite the limited thickness of 180 microns, it offers sufficient protection for summer applications, and its user-friendly design makes it a valuable addition to any pool.
Summer covers are used when no one is swimming and help to keep the water warm during the day or at night. They also help to keep the pool free of debris and keep the pool water clean by allowing larger particles to remain on the surface. Using a cover during the high season (4 months) means 50% less water evaporation.
The great advantage of these covers is that they can also be adapted to other pool models, such as inflatable pools or tubular pools. The thickness of GRE summer pool covers ranges from 180 to 400 microns, ensuring that all needs are met. The range of summer covers for oval pools covers all needs of the GRE pool ranges (hybrid and inground pools made of wood composite steel).
Equipment
Product features:
Rectangular summer cover for 970 x 380 cm wooden pools (Mint Model)
Sunlight heats the pool water and maintains the temperature at night thanks to the bubbles acting as thermal insulation.
Helps to keep the water in good condition by preventing leaves, insects, etc. from falling into it
Floats on the water with the bubbles facing downwards
Easy to use and remove during the swimming season
Dimensions: 965 x 375 cm
Thickness: 400 microns
Material: Polyethylene with anti-UV components for better durability
Color: blue
Reference: 786641
Summer covers are used when no one is swimming and help keep the water warm during the day or at night. They also help keep the pool free of debris and keep the pool water clean by keeping larger particles on the surface. Using a cover during the high season (4 months) means 50% less water evaporation.
The great advantage of these tarpaulins is that they can also be adapted to other pool models, such as inflatable pools or tubular pools. The thickness of GRE summer pool covers varies from 180 to 400 microns, ensuring that all needs are met. The range of summer covers for oval pools covers all needs of the GRE pool ranges (hybrid and inground wood-composite steel pools).
Equipment
Product features:
Isothermal cover for round wooden pools Ø242 cm (model Lili 2)
Sunlight heats the pool water and maintains the temperature at night thanks to the bubbles that act as thermal insulation.
Helps to keep the water in good condition because it prevents leaves, insects, etc. from falling in.
Floats on the water with the bubbles facing down.
Easy to use and remove during the swimming season.
Dimensions: Ø237 cm
Thickness: 400 microns
Material: Polyethylene with anti-UV components for better durability
Color: blue
Reference: CV800008
Summer cover made of blue UV-resistant bubble wrap, self-floating and insulating. Specifically for Interline Bali swimming pools. The cover prevents heat loss from the water. It stores solar heat during the day and retains warmth at night. Slows down water evaporation, protects against dirt and extends your swimming season. Prevents algae growth. The thickness of the cover is 400 microns.
UV-resistant bubble wrap, self-floating
Insulating, prevents algae growth
Thickness: 400 microns
Specifically for Interline wooden oval swimming pool
Keep your pool warm and clean for longer
With the summer cover for a 1250 x 640 cm oval pool, you can enjoy a pleasant water temperature and a clean pool for longer. This high-quality cover is made of blue UV-resistant bubble wrap of 180 microns and simply floats on the water surface. During the day, the air chambers absorb heat from the sun, while the cover retains that heat at night. As a result, the pool water stays at temperature longer and heat loss is significantly reduced.
In addition, the cover reduces water evaporation, prevents leaves and other debris from entering the pool, and helps limit the growth of algae. This allows you to save on water, chemicals, and maintenance, while extending your swimming season.
Optimal insulation thanks to bubble wrap
The summer cover is made of 180 micron UV-resistant bubble wrap. The air chambers provide an insulating effect, allowing heat to be retained more effectively. Furthermore, the cover floats on the water by itself and is easy to place and remove.
Less evaporation and a cleaner pool
By covering the water when the pool is not in use, significantly less water evaporates. This means you need to top up less often and the chemical balance is also better maintained. At the same time, the cover prevents leaves, insects, and other debris from ending up in the pool.
Extends the swimming season
The solar cover makes optimal use of the sun's heat and retains it for longer. As a result, the pool warms up faster and the water stays pleasant for longer, even during cooler nights. This allows you to start swimming earlier in the spring and continue longer into the autumn.
Suitable for Interline steel pools
This summer cover is specifically suitable for Interline steel pools, but can also be used on other oval inground and above-ground pools with similar dimensions.
Why choose this summer cover?
With the summer cover for a 1250 x 640 cm oval pool, you get more out of the sun and enjoy wonderfully warm pool water for longer. The insulating bubble wrap limits heat loss, reduces evaporation, and keeps debris out of the pool. This allows you to save on maintenance, water, and energy, while your pool is always ready for a refreshing dip. Thanks to the durable 180 micron UV-resistant design, this cover is a smart investment for every pool owner.
This Interline summer cover is the ideal solution to keep your pool water warm, clean, and clear during the swimming season. Made of blue UV-resistant bubble wrap, the cover offers excellent insulation and a self-floating effect, without the need for additional attachment.
During the day, the material absorbs the sun's heat and releases it into the pool water, while at night it helps to limit heat loss. Thanks to the cover, evaporation is slowed, algae growth is inhibited, and the pool remains better protected against leaves, dirt, and insects.
This cover is suitable for both inground and above-ground pools, in particular for round Interline steel pools with a diameter of Ø640 cm. The foil has a thickness of 180 microns, which guarantees a good balance between sturdiness and flexibility.
Summer cover made of blue UV-resistant bubble wrap, self-floating and insulating. Suitable for in-ground and above-ground pools. The cover prevents heat loss from the water. It stores solar heat during the day and retains the heat during the night. Slows down water evaporation, protects against dirt and extends your swimming season. Prevents algae growth. The thickness of the cover is 180 microns.
UV-resistant bubble wrap
Self-floating
Insulating
Prevents algae growth
Thickness: 180 microns
Suitable for Interline steel pools
The Night Blue Bubble Cover is specially designed for round swimming pools with a diameter of Ø 450 cm. This high-quality cover not only helps to keep your pool clean, but also plays a crucial role in heat retention. Did you know that a swimming pool loses an average of 70% of its heat through evaporation? This bubble cover reduces that evaporation by no less than 98%, allowing you to save significantly on energy and maintenance costs.
Thanks to Geobubble technology, this bubble cover is up to 25% more durable than traditional covers. The air bubbles provide extra insulation and contribute to a natural warming of your pool water by 2-3°C, completely free of charge thanks to solar energy. With a thickness of 500 microns, this cover offers optimal quality and sturdiness.
The deep blue color (Night Blue) gives your pool an elegant look and increases the insulating effect.
Did you know that a swimming pool loses up to 70% of its heat through evaporation? A good pool cover is therefore essential to limit energy loss, chemical consumption, and costs. This dark blue 400-micron bubble cover is specially designed to prevent evaporation and make maximum use of the sun's natural heat.Thanks to Geobubble technology, this cover has a longer lifespan and increased performance compared to standard bubble wraps. The unique bubble structure provides an improved insulating effect and is more resistant to UV radiation, chemicals, and wear.
A swimming pool loses 70% of its heat through evaporation. A good pool cover reduces evaporation by up to 98%. Moreover, a bubble cover has the advantage of allowing free solar heat into the pool to warm the swimming water. The degree of heating depends on the light transmission of the chosen material.It is therefore important to place the pool cover on the water when the pool is not in use.All our bubble covers are equipped with Geobubble technology, which makes them last up to 25% longer than traditional bubbles. Advantages of Geobubble micron bubble covers are:- 98% reduction in evaporation- free solar heating of 2-3°C - 50% savings on heating costs- 50% lower chemical consumption- significant cost savings and smaller carbon footprint
This pool cover is in the color: Dark Blue and is 400 microns thick.
InformationManual
Summer covers are used when no one is swimming and help to keep the water warm during the day or at night. They also help keep the pool free of debris and keep the pool water clean by trapping larger particles on the surface. The great advantage of these covers is that they can also be adapted to other pool models, such as inflatable pools or tubular pools. The thickness of GRE summer pool covers ranges from 180 to 400 microns, ensuring that all needs are met. The range of summer covers for oval pools covers all requirements for the GRE pool series (hybrid and in-ground pools made of wood-composite steel).
Product features:
Summer cover for round composite pool Ø366 cm
Sunlight heats the pool water and maintains the temperature at night thanks to the bubbles that act as thermal insulation.
Protects the pool against all types of debris: leaves, insects, dust, etc.
Floats on the water with the bubbles facing down
Easy to use and remove during the swimming season
Dimensions: Ø361 cm
Thickness: 400 microns
Material: Polyethylene with anti-UV components for better durability
Colour: blue
Summer covers are used when no one is swimming and help keep the water warm during the day or at night. They also help keep the pool free of debris and keep the pool water clean by allowing larger particles to settle on the surface. Using a cover during the high season (4 months) means 50% less water evaporation.
The great advantage of these tarps is that they can also be adapted to other pool models, such as inflatable or tubular pools. The thickness of the GRE summer pool covers ranges from 180 to 400 microns, ensuring that all needs are met. The range of summer covers for oval pools covers all the needs of the GRE pool series (hybrid and in-ground composite wood/steel pools).
Equipment
Product features:
The Gre oval composite summer cover is a high-quality bubble wrap specifically designed for oval pools measuring 618 x 338 cm. This summer cover has an effective size of 613 x 333 cm, allowing the cover to sit perfectly within the pool walls for optimal performance. This cover combines ease of use with energy savings, thermal insulation, and protection against dirt – essential for anyone looking to get the most out of their pool during the swimming season.
The bubble structure of this cover acts as a thermal insulation cushion: it retains the heat stored in the water by the sun during the day more effectively and slows down cooling at night. This keeps the swimming water at a comfortable temperature without the need for additional energy consumption. Additionally, the cover protects the pool from leaves, insects, dust, and other debris, reducing the time you spend cleaning.
The cover floats easily on the water with the bubbles facing down and is lightweight and flexible, making it easy to install and remove. The durable polyethylene with UV-resistant components ensures that the cover is resistant to sunlight and long-lasting.
The Gre oval composite summer cover 613 x 333 cm is a smart addition for pool owners who value comfort, energy efficiency, and low maintenance. Enjoy warmer and cleaner pool water for longer with minimal effort.
Keep your pool water pleasantly warm for longer while simultaneously limiting water evaporation and contamination with the GRE Oval Summer Cover for pools of 730 x 375 cm. This isothermal cover has been specially developed for large oval pools and forms an insulating layer directly on the water surface.
The summer cover is ideal as an addition to the GRE Ovalada Oval Steel Pool - 730 cm x 375 cm x 132 cm. The cover is placed directly onto the pool water and floats on it. As a result, no attachment with cables or tensioners is required.
The cover helps to keep the accumulated heat in the pool for longer, reduces evaporation, and ensures that leaves, insects, and other coarse debris do not end up in the pool water as easily.
Specifically for oval pools of 730 x 375 cm
The GRE CPROV730 summer cover is developed for oval pools with a nominal size of 730 x 375 cm.
Unlike a winter cover, a summer cover is not stretched over the outside of the pool structure. It is placed directly on the water surface within the pool walls.
As a result, the cover may be slightly smaller than the nominal outer dimensions of the pool.
Keep the heat in the pool for longer
A large pool contains a lot of water. Once the pool has warmed up, you naturally want to retain that heat for as long as possible.
A large part of heat loss occurs via the open water surface. Especially during cooler nights, the temperature of an uncovered pool can drop noticeably.
The GRE isothermal summer cover forms an insulating layer between the pool water and the outside air. This limits heat loss and helps the accumulated heat to be retained for longer.
Ideal when using a pool heat pump
For a pool of 730 x 375 cm, a summer cover is particularly interesting if you are using a pool heat pump.
The heat pump heats the pool water, while the cover helps prevent a large part of that heat from being lost again through the water surface.
This means the heat pump has to replenish less lost heat. This can help to significantly reduce the energy consumption for heating the pool.
For the most efficient pool heating possible, it is therefore wise to cover the pool as soon as it is no longer being used for swimming.
Up to approx. 50% less water evaporation
During warm, dry, and windy periods, a large open pool can lose a significant amount of water daily through evaporation.
A summer cover covers almost the entire water surface and therefore reduces direct contact between the pool water and the outside air.
According to GRE, using a cover during the high season of approximately four months can result in approx. 50% less water evaporation.
This means you have to add fresh water to the pool less frequently.
Keeps leaves and other coarse debris out
The GRE summer cover does not just help with heat retention.
When the pool is not covered, leaves, insects, twigs, and other debris can end up directly in the water. Some of this is removed by the skimmer, while other debris sinks to the bottom.
With the summer cover, a large portion of this debris remains on top of the cover.
This helps to keep the pool water cleaner and can reduce the load on the skimmer and filter system.
Isothermal effect
The GRE CPROV730 is an isothermal cover. The material is designed so that it floats directly on the pool water.
The air structure within the cover provides the insulating effect. This shields the water surface from the outside air, reducing both heat loss and evaporation.
The cover must be placed correctly on the water to take full advantage of this effect.
Made of polyethylene
GRE manufactures this series of summer covers from polyethylene.
This material is light, flexible, and therefore practical for regular use during the swimming season. You can easily roll the cover over the water surface and remove it again when you want to swim.
The blue color also matches the look of the pool water nicely.
Floats directly on the water
No cables, elastic bands, or other attachment materials are needed for this summer cover.
You simply lay the cover directly on the pool water. It then stays floating on the water surface.
When you want to swim, you remove the cover completely from the pool. After use, it can be placed over the water again.
Easier to use with a reel system
Due to the large pool size of 730 x 375 cm, this is a fairly large cover.
The cover can be placed and removed manually, but for regular use, a suitable reel system for pool covers can make using it considerably easier.
This allows you to roll up the cover more evenly and store it compactly next to the pool.
Summer cover and winter cover are not the same
It is important to distinguish between a summer and winter cover.
This GRE CPROV730 summer cover floats on the pool water and is intended to retain heat, reduce evaporation, and keep out coarse debris during the swimming season.
A winter cover, on the other hand, is placed over the pool structure and securely fastened around the pool. This type is intended to cover the pool during a longer winter period.
The CPROV730 summer cover is therefore not intended as a replacement for a GRE winter cover.
What is included?
You will receive:
GRE isothermal summer cover
Oval version
Suitable for pool size 730 x 375 cm
Reference CPROV730
The cover is placed directly onto the pool water. Therefore, no attachment cables or tensioners are necessary.
