Gre Oval Steel Pool - 730 cm x 375 cm x 132 cm

Enjoy a generous swimming pool in your own garden with the Gre Ovalada Oval Steel Pool - 730 cm x 375 cm x 132 cm. This large oval pool from the GRE Anthracite series combines a sturdy steel construction with a modern anthracite gray finish, a spacious swimming area, and a very comprehensive standard equipment package.

With a water capacity of no less than 28,210 liters and a swimming surface of approximately 24.12 m², this model is ideal for families who want plenty of space for swimming, playing, and relaxing.

A significant advantage of this version is the special Omega system with buried support beams. This eliminates the need for large protruding side supports. As a result, the pool takes up considerably less space around the perimeter while maintaining a sleek appearance.

The set is supplied complete with, among other things, a 6 m³/h sand filter system, approximately 40 kg of filter sand, 40/100 liner, skimmer, safety ladder, protective ground cloth, and connection hoses.

Extra large oval pool

With a commercial size of 730 x 375 x 132 cm, this Gre Ovalada belongs to the larger steel above-ground pools.

The actual internal dimensions are approximately:

720 x 375 x 130 cm

The external dimensions of the construction are approximately:

744 x 400 x 132 cm

This provides a long swimming zone of over 7 meters. This makes this version not only suitable for playing and relaxing, but also attractive for those who actually want to swim laps or longer distances in the pool.

For the complete installation, GRE advises accounting for a required space of approximately 770 x 495 cm.

No less than 28,210 liters of water

The Gre Ovalada has a water capacity of approximately 28.21 m³, or about 28,210 liters.

The swimming surface is approximately 24.12 m² and the waterline is at a height of approximately 117 cm.

This gives you a full-fledged family pool with significantly more swimming space than the smaller 610 x 375 cm Ovalada version.

Modern anthracite gray steel outer wall

The outer wall has a stylish anthracite gray finish. This gives the pool a modern look that fits perfectly in contemporary gardens.

The steel pool wall has a thickness of approximately 45/100. The pool construction and profiles are manufactured from steel, and the design is intended to safely contain the large volume of water when the pool is installed correctly.

The connections between the horizontal profiles are also finished with protective covers for a neat appearance.

Omega system with buried support beams

One of the greatest advantages of this model is the special support system.

Many large oval steel pools require bulky metal side supports. These protrude far outwards on both long sides, significantly increasing the required installation space.

The Gre Ovalada KITPROV7388GY uses a system with buried support beams. As a result, the traditional large side supports are not needed.

The result is a sleeker pool and a significantly more compact installation.

For comparison: GRE also has a 730 x 375 cm version with side supports. That requires approximately 770 x 595 cm of installation space, whereas this version with buried beams needs about 770 x 495 cm.

Blue 40/100 pool liner

The interior is finished with a blue PVC liner with a thickness of 40/100.

The liner is treated with an anti-UV coating, making it more resistant to prolonged exposure to sunlight.

The blue interior also provides the familiar fresh blue appearance of the pool water.

For a long lifespan of the liner, it is important that the ground is completely flat, clean, and free of sharp objects.

Includes 6 m³/h sand filter system

A complete sand filter system with a capacity of 6 m³ per hour is included for filtration.

The pool water is drawn in through the skimmer and then passed through the filter medium. Dirt particles are trapped in the sand, after which the filtered water flows back into the pool.

The filter tank has a diameter of approximately 400 mm and the system has a power output of approximately 230 watts.

Approximately 40 kg of filter sand included

Approximately 40 kg of silica sand is included with the sand filter. The prescribed filter sand has a grain size of approximately 0.4 to 0.8 mm.

This means you do not need to immediately purchase separate filter sand to start using the included system.

Skimmer included

A skimmer set is also part of the standard equipment.

The skimmer draws in surface water and helps remove leaves, insects, and other floating debris from the pool before they can sink to the bottom.

Through the skimmer, the water is led to the sand filter and subsequently returned to the pool once filtered.

Safety ladder with removable steps

For a pool that is 132 cm high, a good pool ladder is essential. That is why this Ovalada is supplied with a safety ladder with a platform and 6 steps.

The ladder has three steps on each side. The steps on the outside can be removed when the pool is not in use.

This can restrict access for small children. Naturally, proper supervision around a pool always remains necessary.

Protective ground cloth included

A polyethylene protective cloth of approximately 200 g/m² is placed under the pool.

The included ground cloth measures approximately 7.5 x 4 meters and forms an additional protective layer between the ground and the pool construction.

The ground cloth is not a substitute for a well-prepared surface. The ground must be completely flat, firm, stable, and free of sharp objects.

Complete pool set

The Gre Ovalada is supplied as a very complete set. You therefore do not need to look for all the essential components separately to install the pool.

In addition to the steel pool construction, you immediately receive the liner, sand filter system, filter sand, skimmer, safety ladder, protective ground cloth, and connection hoses.

Installation

Due to its size and the system with buried support beams, assembly requires more preparation than a simple frame pool.

GRE estimates an assembly time for this version of approximately 8 hours with 2 to 3 people.

Preparation of the ground, excavation work for the support beams, filling the pool, and further technical installation may be additional to this.

A concrete floor slab is indicated by GRE as optional. However, a completely flat, stable, and sufficiently load-bearing surface is necessary.

The water in the pool alone weighs over 28 tons. A correct preparation of the surface is therefore essential.

What is included?

With the Gre Ovalada 730 x 375 x 132 cm, you receive the anthracite gray steel pool construction, blue 40/100 liner, Omega support system with buried beams, 6 m³/h sand filter system, approximately 40 kg of silica sand, skimmer set, connection hoses, polyethylene ground cloth, and safety ladder with platform and 6 steps.

This gives you an immediately very complete foundation for a large, permanent above-ground pool.