Increase the hardness of your water and prevent corrosion and limescale on your spa equipment. Too low water hardness is harmful to the technical parts of the spa. With good water hardness you extend the life of your spa parts. A good hardness is between 150 and 400 ppm. Is the calcium value of your water below this level? Then use the W'eau Calcium Booster to bring the value to the desired level.
Instructions for use W'eau Calcium Booster
Turn on the jets
Pour the required amount into your spa water
15 ml increases the hardness by 7.4 ppm per 1000 liters of water.
The ideal hardness is between 80 and 150 ppm
Let the filter system run for 1 to 2 hours
Measure the hardness of the water again to check whether the water has the correct calcium value
Repeat the steps if the desired hardness of the water is still too low
Safety instructions W'eau Calcium Booster
Always wear gloves when adding. Keep the product out of the reach of children and store it in a closed container in a well-ventilated place. Always read the safety instructions on the packaging.
Features W'eau Calcium Booster
Liquid form
Contents: 1 litre
W'eau Clear Water quickly converts cloudy water into pure and clear spa water. It is a ready-to-use liquid solution that neutralizes and removes dirt. Use it for soap scum, oil and other small dirt particles. Regular use ensures a crystal clear spa with healthy water. We recommend using it once a week for the best results.
Instructions for use W'eau Clear Water
Remove the spa filter
Turn on the jets
Add W'eau Clear Water directly to the spa water; use 30 ml for spas up to 1000 liters and 60 ml for higher volume spas
Let the jets run for another 1 hour
When your spa is clear again, replace the spa filter
Safety instructions W'eau Clear Water
Never add the product with people in the spa. Keep the product out of the reach of children and store it in a closed container in a well-ventilated place. Always read the safety instructions on the packaging.
Features W'eau Clear Water
Liquid form
Contents: 1 litre
With W'eau Defender you prevent the build-up and deposition of limescale on the spa surface and built-in parts. W'eau Defender is a good descaler that is not only useful for preventing, but also removing limescale. It extends the life of your pipework and all equipment in your spa.
Instructions for use W'eau Defender
Add W'eau Defender directly to the water
Use 2 tablespoons (30ml) of W'eau Defender weekly for spas up to 1000 liters
Use 4 tablespoons (60ml) of W'eau Defender weekly for spas larger than 1000 liters
Let the filter system run for one hour or use a normal filter cycle
Safety instructions W'eau Defender
Never add the product with people in the spa. Keep the product out of the reach of children and store it in a closed container in a well-ventilated place. Always read the safety instructions on the packaging.
Features W'eau Defender
Liquid form
Contents: 1 litre
W'eau Filter Cleaner contains a concentrated formula for deep filter cleaning. W'eau Filter Cleaner removes dirt, oil, grease and limescale from your spa filter in just one night. Extremely useful for filter cartridges, but also for sand filters and DE filters.
Instructions for use W'eau Filter Cleaner
Remove the spa filter from your spa
Fill a bucket with 30 liters of clean water
Add 150 ml of W'eau Filter Cleaner and mix well with the water
Place the filter in the bucket and make sure it is submerged in water
Leave the filter in the bucket for at least 3 hours; preferably a whole night
Remove the filter from the bucket and rinse it with clean water
Place the filter back in your spa
Safety instructions W'eau Filter Cleaner
Always wear protective gloves when using W'eau Filter Cleaner. Keep the product out of the reach of children and store it in a closed container in a well-ventilated place. Always read the safety instructions on the packaging.
Features W'eau Filter Cleaner
Liquid form
Contents: 1 litre
W'eau Jet Clean - 500 ml is a powerful cleaner specially designed to remove oils, dirt and mineral deposits from your spa's pipes and jets. This 'invisible cleaner' targets the parts of your spa that you don't see, but which are essential for proper water flow and the maintenance of your equipment. By cleaning the pipes and jets, W'eau Jet Clean prevents the build-up of dirt that can restrict water circulation and cause potential damage to your equipment. We recommend using the product every three months, just before changing the water, to keep your spa functioning optimally.
Safety instructions:
Causes skin irritation and serious eye damage.
Very toxic to aquatic life with long lasting effects.
Always wear protective gloves and keep the product out of reach of children.
Store the product in a well-ventilated place and in a tightly closed container.
W'eau Jet Clean is the ideal solution to ensure that your spa always functions properly and remains free from harmful build-up of dirt, oils and minerals.
The W'eau Slat Cleaner is specially developed to effectively remove limescale and dirt from swimming pool slats and other surfaces. This powerful cleaning formula ensures that your swimming pool slats remain clean and shiny, and prevents unnecessary wear. Regular use of this slat cleaner extends the life of your cover and keeps your pool hygienic and fresh.
Simple and effective to use The W'eau Slat Cleaner is easy to use and offers effective results. It is recommended to use the cleaner approximately twice a year for optimal maintenance of your pool slats. The cleaner is suitable for all types of slats and pool liners. It is easy to use: moisten the slats, apply the diluted cleaner, let it work, and then rinse thoroughly with a pressure sprayer. After treatment, it is important to restore the pH value of the pool water by backwashing the filter thoroughly.
How do you use the W'eau Lamella Cleaner?
First moisten the slats with water.
Dilute the cleaner: use 1 litre of W'eau Lamellenreiniger to 3 litres of water per 10 m² and apply this with a spray gun.
Allow the cleaner to work for 1 to 2 hours to effectively loosen the limescale and dirt.
Rinse the slats thoroughly with a pressure washer to remove any residue.
After treatment, don't forget to backwash the filter and increase the pH of the pool water.
Conclusion The W'eau Slat Cleaner is an essential cleaner for pool owners who want to keep their slats clean, shiny and in good condition. With its powerful formula, it is the perfect solution for removing stubborn limescale and dirt. This cleaner ensures a longer life for your cover and makes maintenance easy and effective.
With W'eau Metal Clean you prevent deposits of iron, copper and other minerals in your spa. Use W'eau Metal Clean with every spa water change to neutralize minerals and prevent deposits. The product reacts with any metal contamination before it has a chance to form unsightly stains.
Instructions for use W'eau Metal Clean
Turn off the filter system
Add (per tub) 250 ml W'eau Metal Clean to the water and distribute evenly
Turn on the filter system and let it run for at least 30 minutes
Safety instructions W'eau Metal Clean
Never add the product with people in the spa. Always use gloves. Keep the product out of the reach of children and store it in a closed container in a well-ventilated place. Always read the safety instructions on the packaging.
Features W'eau Metal Clean
Liquid form
Contents: 500 ml
The W'eau wintering fluid is an essential product for protecting your swimming pool during the winter months. This powerful agent prevents the formation of algae and ensures that the pool water does not turn green. In addition, it helps to prevent the formation of limescale on the pool edges, so that your pool looks fresh and clean again in the spring. The special thing about the wintering fluid is that it remains effective, even when the pH values of the water are not perfectly balanced. Good winter preparation with this fluid ensures that you can immediately enjoy clear swimming water as soon as the temperatures rise again.
The amount of wintering fluid you need depends on the size of your pool. For a powerful effect, we recommend 1 litre of fluid per 10m³ of water, although a standard dosage of 1 litre per 25m³ is often sufficient. For the best protection, carry out this treatment twice per winter, so that the pool remains well protected throughout the winter.
The wintering fluid also has a long shelf life, without an expiry date, so you can safely use any leftovers the following winter.
Required amount of wintering fluid (per winter):
15m³ swimming pool: 3 litres
30m³ swimming pool: 6 litres
45m³ swimming pool: 9 litres
60m³ swimming pool: 12 litres
75m³ swimming pool: 15 litres
90m³ swimming pool: 18 litres
Instructions for use of wintering fluid:
Remove all visible dirt from your pool.
Perform a shock treatment with chlorine shock to properly disinfect the water.
Wait 24 hours after chlorine treatment.
Add 1 litre of wintering fluid per 10m³ and spread it evenly over the pool.
Halfway through winter, add another 1 litre of wintering fluid per 15m³ of water.
It is not necessary to circulate the pool pump after adding the fluid. Always follow safety precautions and wear gloves when using the wintering fluid.
Safety instructions:
Always add the liquid to the water, never the other way around.
Wear protective gloves during use.
Store the liquid in a safe, dry and cool place.
Rinse empty containers thoroughly with pool water before disposal.
The pool is not suitable for use during fluid operation.
Characteristics of the wintering fluid:
Liquid form, easy to add to pool water.
Suitable for use in all swimming pools, including saltwater pools.
Works well in combination with other chemicals.
Prevents green water and limescale deposits.
Works effectively at abnormal pH values.
With the W'eau wintering fluid your swimming pool is ready to get through the winter and you are assured of a clean and clear pool in the spring!
The W'eau wintering fluid is an essential product for protecting your swimming pool during the winter months. This powerful agent prevents the formation of algae and ensures that the pool water does not turn green. In addition, it helps to prevent the formation of limescale on the pool edges, so that your pool looks fresh and clean again in the spring. The special thing about the wintering fluid is that it remains effective, even when the pH values of the water are not perfectly balanced. Good winter preparation with this fluid ensures that you can immediately enjoy clear swimming water as soon as the temperatures rise again.
The amount of wintering fluid you need depends on the size of your pool. For a powerful effect, we recommend 1 litre of fluid per 10m³ of water, although a standard dosage of 1 litre per 25m³ is often sufficient. For the best protection, carry out this treatment twice per winter, so that the pool remains well protected throughout the winter.
The wintering fluid also has a long shelf life, without an expiry date, so you can safely use any leftovers the following winter.
Required amount of wintering fluid (per winter):
15m³ swimming pool: 3 litres
30m³ swimming pool: 6 litres
45m³ swimming pool: 9 litres
60m³ swimming pool: 12 litres
75m³ swimming pool: 15 litres
90m³ swimming pool: 18 litres
Instructions for use of wintering fluid:
Remove all visible dirt from your pool.
Perform a shock treatment with chlorine shock to properly disinfect the water.
Wait 24 hours after chlorine treatment.
Add 1 litre of wintering fluid per 10m³ and spread it evenly over the pool.
Halfway through winter, add another 1 litre of wintering fluid per 15m³ of water.
It is not necessary to circulate the pool pump after adding the fluid. Always follow safety precautions and wear gloves when using the wintering fluid.
Safety instructions:
Always add the liquid to the water, never the other way around.
Wear protective gloves during use.
Store the liquid in a safe, dry and cool place.
Rinse empty containers thoroughly with pool water before disposal.
The pool is not suitable for use during fluid operation.
Characteristics of the wintering fluid:
Liquid form, easy to add to pool water.
Suitable for use in all swimming pools, including saltwater pools.
Works well in combination with other chemicals.
Prevents green water and limescale deposits.
Works effectively at abnormal pH values.
With the W'eau wintering fluid your swimming pool is ready to get through the winter and you are assured of a clean and clear pool in the spring!
With the W'eau TA+ Alkalinity - 1 kg you ensure that the alkalinity of your pool water remains optimal, which is essential for a stable pH value. By increasing the total alkalinity with TA+ powder, the pH value becomes less sensitive to fluctuations due to weather influences or the use of chemicals. This helps to maintain a safe and comfortable water balance, which improves both the lifespan of your pool and swimming comfort. The dosage of the powder is easy to adjust to the size of your pool, and with a few simple steps you ensure that the water is at the right level again. Ideal for anyone who wants to keep their pool water healthy and balanced. The W'eau TA+ Alkalinity helps keep your pool water in top condition by ensuring a stable pH value, which is crucial for a safe and comfortable swimming climate.
With the W'eau TA+ Alkalinity - 3 kg you ensure that the alkalinity of your pool water remains optimal, which is essential for a stable pH value. By increasing the total alkalinity with TA+ powder, the pH value becomes less sensitive to fluctuations due to weather influences or the use of chemicals. This helps to maintain a safe and comfortable water balance, which improves both the lifespan of your pool and swimming comfort. The dosage of the powder is easy to adjust to the size of your pool, and with a few simple steps you ensure that the water is at the right level again. Ideal for anyone who wants to keep their pool water healthy and balanced. The W'eau TA+ Alkalinity helps keep your pool water in top condition by ensuring a stable pH value, which is crucial for a safe and comfortable swimming climate.
With the W'eau TA+ Alkalinity - 5 kg you ensure that the alkalinity of your pool water remains optimal, which is essential for a stable pH value. By increasing the total alkalinity with TA+ powder, the pH value becomes less sensitive to fluctuations due to weather influences or the use of chemicals. This helps to maintain a safe and comfortable water balance, which improves both the lifespan of your pool and swimming comfort. The dosage of the powder is easy to adjust to the size of your pool, and with a few simple steps you ensure that the water is at the right level again. Ideal for anyone who wants to keep their pool water healthy and balanced. The W'eau TA+ Alkalinity helps keep your pool water in top condition by ensuring a stable pH value, which is crucial for a safe and comfortable swimming climate.
The W'eau TA- Alkalinity 3 kg is an essential product for maintaining the chemical balance in your pool water. This product helps to lower the total alkalinity (TA) of the water, which is important to keep the pH value stable. A stable pH value ensures that your pool water is less sensitive to external factors such as weather changes and the use of chemicals. This extends the life of your pool and makes it more pleasant to swim in.
This 3kg pack allows you to easily adjust alkalinity by adding the powder to water in a bucket and then distributing it evenly in the pool. The product dissolves quickly and ensures that the pH value remains stable for longer. The W'eau TA- Alkalinity 3 kg is a reliable choice for anyone who wants to keep their swimming water healthy and clear by maintaining the alkalinity level.
With the W'eau TA- Alkalinity - 5 kg you can easily and effectively reduce the total alkalinity of your pool water. The right alkalinity ensures a stable pH value, which is essential for a healthy water balance. This powder helps to make the pH value less sensitive to external influences, such as the weather or an excess of chemicals. The W'eau TA- is quickly soluble and easy to dose manually, so that your pool water remains in top condition. Thanks to the large packaging of 5 kg, this product is ideal for larger pools or long-term use. Ensure a safe and stable pH value and prevent problems such as corrosion or skin irritation. The W'eau TA- Alkalinity - 5 kg is a reliable solution to lower the alkalinity of your pool water and thus stabilize the water balance. Ideal for a safe and pleasant swimming climate!
With this W'eau Acrylic Cleaner you can make the outside of your spa shine again. The Acrylic Cleaner has been specially developed for use on acrylic surfaces such as spas, baths and shower cabins. Light damage such as scratches and stains are easy to remove with the W'eau Acrylic Cleaner. Once applied to the surface, a protective layer remains that prevents the growth of lime and soap.
High-quality cleaner for stubborn dirt and minor damage
Suitable for acrylic surfaces such as the exterior of the spa
Gives the exterior of your spa a shine again
Creates a protective layer on the surface
