Hot tub filters sale

Keep your spa water clean and clear with the W’eau Spa Filter Type 107. A good spa filter is essential for removing dirt particles from the circulating water. This includes hair, dust, skin cells, and other small debris that end up in the spa water during use. This W’eau filter has a length of 19 cm and a diameter of 15 cm and features a fine external thread at the bottom. The top is closed and equipped with a practical handle, making the filter easy to place into and remove from the spa. The W’eau Type 107 is a suitable replacement for, among others, Darlly SC807, Darlly 60406, Unicel 6CH-352, Pleatco PAS40-F2M, and Filbur FC-0312. Keep your spa water clean During the use of a spa, small contaminants are constantly entering the water. Even when the water looks clean at first glance, fine dirt particles may be present. The filter pump circulates the spa water through the filter material. The dirt remains trapped between the fine pleats of the filter, after which the filtered water flows back into the spa. A clean spa filter therefore contributes to clear water and well-functioning water circulation. Reemay filter material The W’eau Spa Filter Type 107 uses high-quality Reemay filter material. The pleated material creates a large filter surface area within a relatively compact size. Due to the many pleats, the filter can catch a large amount of small dirt particles from the water. To maintain this efficiency, it is important to clean the filter regularly. Dimensions of 19 x 15 cm The filter has a length of 19 cm and a diameter of 15 cm. When checking the size, pay attention to the correct way of measuring. The length is measured from edge to edge of the filter body, excluding the handle and the connection. Always check both the dimensions and the type of connection of your current filter before ordering. Simply having the same length and diameter is not enough to guarantee that a filter will actually fit. External fine thread At the bottom, there is a fine male thread with an outer diameter of approximately 5.8 cm. This allows the filter to be screwed directly into the corresponding spa connection. The top of the filter is closed and features a handle. This makes it easier to unscrew the filter from the spa during maintenance. Replacement for various filter codes Spa filters are often sold by different manufacturers under their own article or type numbers. As a result, a filter with the same dimensions and connection may have multiple different reference numbers. The W’eau Spa Filter Type 107 replaces, among others: Darlly SC807 Darlly 60406 Unicel 6CH-352 Pleatco PAS40-F2M Filbur FC-0312 Do you have a different brand or type number? Then this filter might still be suitable. Carefully check the dimensions, the outer diameter of the thread, and the design of the top and bottom. Clean regularly for optimal filtering A spa filter collects more and more dirt during use. When the pleats become saturated, water finds it harder to flow through the filter. Therefore, rinse the filter thoroughly on a regular basis. Ensure that dirt between the individual pleats is also removed. Depending on how intensively you use the spa, the water quality, and maintenance, a deeper cleaning with a suitable filter cleaning agent may periodically be necessary. A filter is also a wear-and-tear part. Even when cleaned regularly, the quality will eventually decrease. Replace a worn, damaged, or heavily soiled filter in good time.

Read more less

To ensure your spa water remains as clean as possible, you also need the right spa filter. This spa filter has a diameter of 15 cm and a length of 20 cm. Please note that you should measure this from edge to edge, excluding any handles or connections. The spa filter is connected via an external thread and the top is closed. Check carefully that the dimensions and connections match your current spa filter to ensure that the spa filter fits correctly! This spa filter is 20 x 15 cm and replaces, among others: Darrly filter SC754 Darrly filter 60355 Pleatco filter PAS40-F2M Unicel filter Jazzi Spa3 Tip: This spa filter is also suitable for other brands and types, provided the old and new filters have the same dimensions and connection.

Read more less

To ensure your spa water stays as clean as possible, you also need the right spa filter. This spa filter has a diameter of 10 cm and a length of 4 cm. Please note that you should measure this from edge to edge, excluding any handles or connections. The spa filter is open at both the top and the bottom. You therefore connect the spa filter using these openings. Check carefully that the dimensions and connections match your current spa filter to prevent the spa filter from not fitting properly! This spa filter is 4 x 10 cm in size and replaces, among others: Darlly filter SC806 Darlly filter 40011 Tip: This spa filter is also suitable for other brands and types, as long as the old and new filter have the same dimensions and connection.

Read more less