Description
Energy ECO Full-Inverter® control
The Full-Inverter® heat pump control works completely stepless between 25 and 95 Hz. The optimum speed of the compressor and fan is determined by the deviation from the requested temperature. The greater the deviation, the higher the delivered power. The Energy ECO Full-Inverter® heat pump will try to keep the pool at the right temperature with the lowest possible compressor speed (and therefore the lowest possible electrical consumption). In this situation, the efficiency of the heat pump is highest and the noise production is lowest.
Very high yield
The Energy ECO Full-Inverter® heat pump is equipped with a unique, linear control.
This linear, stepless control of the compressor between 25 and 95 Hz allows for efficiencies (COP) of up to 12! This means that the heat pump has an input power of 1 kW of electricity and an output power to the pool water of max. 12 kW of heat.
Low noise level!
Because the Full-Inverter® heat pump rarely runs at 100% of its capacity, the noise level of this continuously variable Full-Inverter® heat pump is very low. For the night situation, the noise level can be reduced to 28 dB(A) using the silence mode. The same noise level as whispering.
Properties
- Plastic design casing
- Very high yield
- Low noise level
- User-friendly LCD display
- Controller 3 key operation
- 3 year warranty
- 5 year warranty on the compressor
- 5 year warranty on the heat exchanger
Brochure in Dutch
Manual in Dutch
Heat pump type |
Full inverter |
Swimming pool volume |
0 - 24 m3 |
Maximum recommended content (our advice!) |
20 m³ |
Tension |
230 Volt |
Warranty |
3 years |
COP |
4.5 - 7.0 at air 27°C |
Consumption per hour (kW) |
0.14 - 1.51 kW |
Heating capacity at 15°C |
1.1 - 5.2 kW |
Heating capacity at 26°C |
1.4 - 6.8 kW |
Sound level (dB) |
19 - 29 dB at 10 meters |
Minimum flow (m³/hour) |
2.4 m³ |
Airflow |
Horizontal |
Heat Exchanger (Material) |
Titanium |
Cooling gas |
R32 |
Nominal power (A) |
5.4 - 6.5 A |
With plug |
No |
Connection |
50 mm |
Circuit breaker |
16A |
Required cable thickness (mm) |
3 x 2.5mm |
Max. operating temperature |
43 Celsius |
Soft start |
No |
Wifi module |
No |
Supplied with winter cover |
No |
Weight |
43 KG |
Dimensions in cm (lxwxh) |
1003 x 403 x 603 mm |