Description
It transparent lid The swimming pool pump is made in such a way that you can easily open it with a quarter turn and close it again in the same way. Leaks at the lid of the pump's pre-filter are thus avoided. On the other hand, it is very easy to see whether there is dirt in the pre-filter of the swimming pool pump. In other words, you do not have to unnecessarily open the lid to check whether there is dirt in the filter basket.
You can also easily empty it at the bottom of the pump to prevent damage in freezing weather. You can remove the plug from the pump without tools.
Included in the packaging of the Hayward K FLO swimming pool pump always connections in diameter 50mm and 63mm . This ensures that the connection to the swimming pool installation is very easy, unlike most other swimming pool pumps.
In summary, this swimming pool pump has been developed and equipped with the best and most useful new features for a good swimming pool filtration pump.
Which pool pump do you need?
The power of the pump is determined by the volume of the pool.
For example: a swimming pool of 50m³ can be pumped 3 times in 10h = 150m³ / 10h = 15m³/h. So it is best to choose a pump that pumps 15m³/h. These flow rates are determined with a certain resistance (pipes, bends, filters, etc.). We express this in head. By hand we calculate with 10m head.
- The K Flo 0.33pK pumps 7 – 10 m³/h for a swimming pool up to 20m³
- A K Flo 0.5pK pumps 10 – 12m³/h for a swimming pool up to 30m³
- K Flo 0.75pK pumps 13 – 15m³/h for a swimming pool up to 45m³
- The K Flo 1pK pumps 15 – 18m³/h for a swimming pool up to 60m³
- And a K Flo 1.5pK pump 22 – 25m³/h for a swimming pool up to 75m³
Make sure you choose a pump that matches the filter you have. If you have a sand filter up to 400mm, choose the K Flo 0.33 – 0.5pK
- With a sand filter up to 600mm, choose the K Flo 0.75pK
In other words, the right combination of pump and sand filter will ensure that you have a good flow rate of the pool water. In summary, a good flow rate in the sand filter will ensure crystal clear water.
Technical properties of the K Flo filter pump
- Quarter-turn transparent rotating lid - no tools required to open
- Vanes and distributor made of extremely strong Norlyl, resulting in a very hard, resistant and corrosion-free material
- This pool pump is compatible with chlorine water and saltwater pools
- In addition, K Flo can replace the Kripsol pump 1 on 1 without adjustments
- Connecting pieces supplied with the pump, in other words easy to connect
| BRAND |
Hayward
|
| PUMP FLOW |
Fixed
|
| ELECTRICAL CONNECTION |
Mono Phase
|
| ASSETS |
0.75 hp
|
| SWIMMING POOL VOLUME M³ |
45
|
