A leaking pool or spa? No panic! With Rijo Leak Sealer, you have a powerful and effective liquid that automatically locates and seals minor leaks of up to approx. 3 mm – without any demolition or dismantling work. Whether it involves a leak in a pipe, fitting, pool liner, or tiled wall, this smart liquid actively searches for the leak and cures there within 48 hours.
User-friendly and efficient, it is suitable for both indoor and outdoor pools and even for spas. Add it to the water, let it circulate, and leave the rest to the sealer. You'll be back to enjoying a leak-free pool in no time.
⚙️ Instructions for use
PreparationEnsure the water is clean and all filters have been cleaned. Remove active carbon or UV systems if present.
Dosage
For spas: Add 1 ml of Leak Sealer per 60 liters of water.
For pools: Pour the contents directly into the water, preferably via the skimmer or near the suspected leak.
CirculationLet the system circulate for 24 hours without a heat pump. Is a heat pump connected? Then temporarily close the bypass to prevent damage.
CuringAfterwards, let the water rest for at least 48 hours so the sealer can cure. Avoid using the pool during this period.
⚠️ Important warnings
Only use when water temperatures are above 6 °C
Do not mix with other chemicals
Keep out of reach of children
Wear protective equipment when dosing
With Rijo Leak Sealer, you can resolve minor leaks in your pool or spa quickly, safely, and easily – without having to dig, drill, or expose pipes. Add it, let it circulate, and enjoy your pool worry-free again.
A leaking pool or spa? Don't panic! With W’eau Leak Sealer, you have a powerful and effective liquid at your fingertips that automatically detects and seals small leaks up to approx. 3 mm – without any demolition or dismantling. Whether it involves a leak in a pipe, fitting, liner, or tiled wall, this smart liquid actively searches for the leak and hardens there within 48 hours.
User-friendly and efficient, suitable for both indoor and outdoor pools and even spas. Add it to the water, let it circulate, and leave the rest to the sealer. This way, you will be back to enjoying a leak-free pool in no time.
⚙️ Instructions for use
PreparationEnsure the water is clean and all filters have been cleaned. Remove active carbon or UV systems if present.
Dosage
For spas: Add 1 ml of Leak Sealer per 60 liters of water.
For swimming pools: Pour the contents directly into the water, preferably via the skimmer or near the suspected leak.
CirculationAllow the system to circulate for 24 hours without the heat pump. Is a heat pump connected? Then temporarily close the bypass to prevent damage.
CuringAfterwards, let the water rest for at least 48 hours so the sealer can cure. Avoid using the pool during this period.
⚠️ Important warnings
Only use when water temperatures are above 6 °C
Do not mix with other chemicals
Keep out of reach of children
Wear protective gear when dosing
With W’eau Leak Sealer, you can resolve small leaks in your pool or spa quickly, safely, and easily – without having to dig, drill, or open up pipes. Add it, let it circulate, and enjoy your pool worry-free again.
A leaking pool or spa? Don't panic! With Rijo Leak Sealer, you have a powerful and effective liquid at your fingertips that automatically detects and seals small leaks up to approx. 3 mm – without any demolition or dismantling. Whether it concerns a leak in a pipe, fitting, pool liner, or tiled wall, this smart liquid actively searches for the leak and hardens there within 48 hours.
User-friendly and efficient, suitable for both indoor and outdoor pools and even spas. Simply add it to the water, let it circulate, and leave the rest to the sealer. You'll be back to enjoying a leak-free pool in no time.
⚙️ Instructions for use
PreparationEnsure the water is clean and all filters have been cleaned. Remove active carbon or UV systems if present.
Dosage
For spas: Add 1 ml of Leak Sealer per 60 liters of water.
For swimming pools: Pour the contents directly into the water, preferably via the skimmer or near the suspected leak.
CirculationLet the system circulate for 24 hours without a heat pump. Is a heat pump connected? If so, close the bypass temporarily to prevent damage.
CuringAfterwards, let the water rest for at least 48 hours so the sealer can cure. Avoid using the pool during this period.
⚠️ Important warnings
Only use when water temperatures are above 6 °C
Do not mix with other chemicals
Keep out of reach of children
Wear protective equipment when dosing
With the Rijo Leak Sealer, you can resolve small leaks in your pool or spa quickly, safely, and easily – without having to dig, drill, or open up pipes. Add it, let it circulate, and enjoy your pool worry-free again.
Relaxing in your NetSpa is wonderful. At least, it is when the water is clean. With this NetSpa spa filter, you can ensure that a great deal of dirt is removed from your spa water. As the name suggests, a NetSpa spa filter is suitable for almost all NetSpa models. Unfortunately, this filter cannot be used in the NetSpa Vita Premium. Clean the spa filter regularly to ensure it continues to work as effectively as possible. It usually needs to be replaced after a month. But don't worry, with this 3-pack you'll be set for a while!
