A well-maintained sand filter pump lasts longer and works more efficiently. Especially during the winter period, it is important to take the right precautions. By storing your pump properly and protecting it against frost, you prevent damage and start the next swimming season without any problems. At Toppy, we are happy to help you with expert advice for the maintenance of your sand filter pump!
Why winter maintenance is essential
Winter can be harmful to your sand filter pump. Freezing and the accumulation of dirt can lead to damage and expensive repairs. By storing and protecting your pump correctly, you prevent these problems and ensure that your pool is ready for use as soon as it gets warmer.
Can a sand filter set remain outside in the winter?
Do you have an above-ground pool? Then we recommend completely dismantling and storing it. Would you still like to leave the sand filter set outside and winterize it actively? You can, provided you take a few important points into account:
-
Ensure constant water circulation to prevent stagnant water.
-
Use a winter cover for extra protection.
-
Check whether your pump has built-in frost protection.
Wintering with a variable pump A variable pool pump can run at low speed, keeping the water in motion with minimal energy consumption. Modern variable pumps often have automatic frost protection, allowing them to adapt to the temperature.
Wintering with a traditional pump With a standard pool pump without variable speed, the pump always runs at full power. This prevents frost damage, but consumes more energy. With an external frequency controller and frost protection, you can reduce this energy consumption.
Read more about the benefits of active wintering here.
Step-by-step guide to storing your sand filter pump
Do you want to store your sand filter pump for the winter? Then follow these steps:
-
Switch off the pump and disconnect it from the electricity and water pipes.
-
Empty the pump completely, including the filter medium. For filter sand, leave a thin layer of water in the tank to prevent clumping.
-
Lubricate rubber seals with acid-free petroleum jelly to prevent them from drying out.
-
Store the pump in a dry, frost-free area. Do not leave it outside, as extreme cold can cause damage.
Handy upgrades for a better next season
Do you notice that your pump has to work harder or functions less efficiently? Then consider an upgrade:
-
Replace filter media – Filter glass or glass beads work more efficiently than traditional filter sand.
-
An energy-efficient pump – A variable sand filter pump uses less power and offers better protection against frost.
Check out our range for the best products to get your pool winter-ready and fully enjoy the next swimming season!
