Beatbot AquaSense 2 Pro pool robot

The Beatbot AquaSense 2 Pro is an advanced, fully cordless pool robot that takes care of almost all pool maintenance. While many pool robots are limited to the floor, walls, and waterline, the AquaSense 2 Pro goes a significant step further. This premium pool robot combines no fewer than 5 cleaning functions in one device: floor cleaning, wall cleaning, waterline cleaning, surface cleaning, and assistance in clarifying pool water.

With a powerful 13,400 mAh battery, 9 motors, 22 sensors, intelligent navigation, and ultrasonic obstacle detection, the AquaSense 2 Pro is designed for thorough and efficient cleaning of both small and very large pools.

And because the robot operates entirely cordlessly, you do not have to deal with a long power cable running through the pool or getting tangled during cleaning.

Complete 5-in-1 pool cleaning

The great advantage of the Beatbot AquaSense 2 Pro is its versatility. One pool robot can perform different types of cleaning.

The AquaSense 2 Pro cleans:

Pool floor: vacuums up dirt, sand, leaves, and other debris from the floor.

Pool walls: climbs up suitable walls and brushes them while cleaning.

Waterline: cleans the zone around the waterline where dirt and residue often accumulate.

Water surface: can also remove floating debris such as leaves and insects from the water surface.

Water clarification: supports the ClearWater™ system in keeping pool water clear.

This allows the AquaSense 2 Pro to combine functions for which multiple devices or additional manual cleaning might normally be required.

Also cleans the water surface

A special advantage of the AquaSense 2 Pro is its active surface cleaning.

Many traditional pool robots move exclusively over the floor and against the walls. Leaves and insects that are still floating on the water must then be removed by the skimmer or with a pool net.

The AquaSense 2 Pro can also move independently at the water surface and collect floating debris there.

As a result, not only is the underwater portion of the pool cleaned, but the surface of the pool is also addressed.

Up to 11 hours of surface cleaning

The AquaSense 2 Pro features a large 13,400 mAh lithium-ion battery.

Depending on the chosen cleaning function, the robot can operate for a remarkably long time.

Surface cleaning: Up to 11 hours
Floor cleaning: Up to 5 hours
Walls and waterline: Up to 9.5 hours

This makes the robot also suitable for larger pools and long cleaning cycles.

The maximum recommended pool area is approximately 300 m², giving the AquaSense 2 Pro more than enough capacity for most private pools.

9 powerful motors

The Beatbot AquaSense 2 Pro features no fewer than 9 motors.

These are used for tasks including propulsion, water circulation, suction power, and precise control of the robot.

The maximum stated water flow/suction capacity is an impressive 5,500 GPH.

The combination of multiple motors ensures that the robot can not only clean powerfully but also maneuver precisely through the pool.

DuoSpeedFlex™ quad-brush system

Just vacuuming up dirt is not always enough. Dirt and residue can become stuck to the floor, walls, and waterline.

That is why the AquaSense 2 Pro features the DuoSpeedFlex™ quad-brush system.

The robot uses four brushes to actively loosen dirt before it is sucked up. This means surfaces are not just vacuumed, but also actively brushed.

This is especially useful for dirt that is not loose on the pool floor.

Dual filtration from 150 microns

The sucked-up dirt is collected in a two-layer filter system.

The AquaSense 2 Pro combines an outer 150-micron filter with an inner 250-micron filter.

This allows the robot to catch various types of debris, including leaves, hair, insects, sand, and other small particles.

The outer filter basket has a capacity of approximately 3.7 liters and the inner filter section approximately 3.5 liters.

Thanks to access from the top, you can easily remove the filter system from the robot after use and rinse it clean.

CleverNav™ intelligent navigation

The AquaSense 2 Pro does not just drive randomly through the pool.

With CleverNav™, the robot analyzes its surroundings and determines an efficient route through the pool.

This allows the robot to treat the available surface systematically and limit unnecessary movements as much as possible.

On the pool floor and against the walls, the robot adapts its navigation to the environment.

This ensures more efficient cleaning and better coverage of the pool.

22 smart sensors

For its navigation, the AquaSense 2 Pro features no fewer than 22 sensors.

Among these are 2 ultrasonic sensors.

With SonicSense™ technology, the robot can detect its surroundings and obstacles. This information is used to adjust the route and navigate more precisely through the pool.

This is especially interesting for pools with unusual shapes, different corners, or other obstacles.

Powerful processor

All information from the various sensors must be processed at lightning speed.

That is why the AquaSense 2 Pro features a quad-core 1.8 GHz Cortex-A7 processor.

This processor works with Beatbot's navigation software to constantly determine the robot's position, route, and movements.

This allows the pool robot to react intelligently to its environment while cleaning.

Suitable for various pool shapes

The Beatbot AquaSense 2 Pro is not intended exclusively for rectangular pools.

The robot can be used in various shapes, including:

• Rectangular pools
• Round pools
• Oval pools
• Kidney-shaped pools
• Free-form pools

This makes the AquaSense 2 Pro suitable for a wide variety of private pools.

Suitable for various pool surfaces

The AquaSense 2 Pro is also highly versatile regarding pool linings.

The robot can be used in pools with, among others:

Concrete
Tiles
Vinyl
Fiberglass

Actual climbing performance may vary depending on the slipperiness, incline, and construction of the pool walls.

ClearWater™ water clarification

In addition to mechanical cleaning, the AquaSense 2 Pro features ClearWater™ Natural Clarification.

With this function, a special clarifying agent can be used to aggregate fine suspended particles, helping to make the pool water clearer.

The necessary ClearWater™ agent is available separately.

This function does not, of course, replace normal pool filtration and water treatment. A proper filter system, correct pH level, and proper disinfection remain necessary.

Automatic parking at the water surface

Pulling a pool robot up from the floor can be quite inconvenient, especially with a robot weighing over 11 kg.

That is why the AquaSense 2 Pro features a smart parking function.

After cleaning, the robot can return to the pool edge and position itself at the water surface.

This makes it easier to remove from the pool without needing to reach for the floor with a hook or long pole.

SmartDrain™ automatic water drainage

When you take a pool robot out of the water, there is usually still a significant amount of water inside the housing.

The AquaSense 2 Pro therefore features SmartDrain™.

As soon as you remove the robot from the pool, the water inside can quickly drain out of the robot. This makes it lighter and easier to handle faster when taking it out.

This is a welcome feature, as the robot itself weighs approximately 11.38 kg.

Control via the Beatbot app

The AquaSense 2 Pro can be connected to the Beatbot app.

The robot supports both Wi-Fi and Bluetooth.

Through the app, you can manage various functions and adjust settings. During surface cleaning, you can also operate the robot remotely.

This is useful, for example, when you see that there are a lot of leaves floating on the water in one specific spot.

6 different cleaning modes

The AquaSense 2 Pro features 6 cleaning modes.

This allows you to adapt the cleaning to what your pool needs at that moment.

You therefore do not have to perform a full cleaning cycle every time if, for example, only the floor or the water surface needs attention.

This allows you to use the available battery capacity more efficiently.

Fully cordless

One of the biggest practical advantages is that the AquaSense 2 Pro works completely cordlessly.

During cleaning, no power cable runs from the robot to the edge of the pool.

This means:

No cable through the pool
No cable getting tangled
No cable getting stuck on obstacles
More freedom of movement for the robot
A tidier appearance during cleaning

This is a major advantage, especially for large or irregularly shaped pools.

Wireless charging station

After use, the AquaSense 2 Pro is placed on the accompanying wireless charging station.

The large 13,400 mAh battery takes approximately 4.5 hours to fully charge.

After that, the robot is ready for another extensive cleaning cycle.

Suitable for large pools

The combination of the large battery, intelligent navigation, and long runtime makes the AquaSense 2 Pro particularly suitable for larger pools.

The maximum stated pool area is approximately 300 m².

This gives the robot much more capacity than is necessary for most private pools.

Even in a pool of, for example, 8 x 4 or 10 x 5 meters, the robot has more than enough capacity.

IP68 waterproof construction

The pool robot itself has an IP68 rating.

This means the device is designed for long-term use underwater within the prescribed operating conditions.

The charging equipment must, of course, be placed outside the pool and according to the instructions.