W'eau Mini Inverter 2.0 Plus swimming pool heat pump - 6 kW

Do you want to enjoy pleasantly warm swimming pool water for longer without placing a large heat pump next to the pool? The W’eau Mini Inverter 2.0 Plus swimming pool heat pump – 6 kW is the most powerful model in the Mini Inverter 2.0 Plus series. This compact pool heat pump combines a heating capacity of up to 6 kW with Full Inverter technology, Wi-Fi control, and high efficiency.

The 6 kW version is particularly suitable for small to medium-sized swimming pools. For the normal swimming season from May to August, a pool volume of up to approximately 18 m³ is recommended. If you want to use the heat pump during a longer season from April to October, we recommend a pool of up to approximately 12 m³.

Thanks to inverter technology, the heat pump automatically adjusts its power to the current heat demand. As a result, it does not need to run at maximum power continuously. This ensures lower energy consumption, less noise, and a more uniform water temperature.

Most powerful Mini Inverter 2.0 Plus

With a maximum of 6 kW heating capacity, this model is the most powerful version in the compact W’eau Mini Inverter 2.0 Plus series.

At an outside temperature of 26°C, the heating capacity can vary from approximately 1.5 to 6.0 kW. At an outside temperature of 15°C, the heating capacity is approximately 1.0 to 4.3 kW.

As a result, the 6 kW version offers significantly more capacity than the smaller models and is ideal if you have a larger pool or simply want some extra heating reserve.

Full Inverter technology

The Full Inverter technology ensures that the heat pump does not have to operate at full power continuously.

When the pool needs to be heated up significantly, the heat pump can utilize its full capacity. As soon as the set water temperature is approached, the heat pump automatically reduces the speed of the compressor and fan.

This ensures that exactly the power needed at that moment is used.

The result is efficient operation, fewer fluctuations in water temperature, and a lower noise level when the heat pump runs at partial load.

High efficiency with a COP of up to 9.4

The W’eau Mini Inverter 2.0 Plus extracts the majority of the required heat from the outside air. This allows the heat pump to deliver more heat to the pool water than it consumes in electrical energy.

At an outside temperature of 26°C, the COP can rise up to 9.4. At an outside temperature of 15°C, the COP is between approximately 4.4 and 6.0.

A COP of 9.4 means that under favorable conditions, the heat pump can deliver up to approximately 9.4 kW of heat for every kW of electrical energy used.

Especially when the pool is up to temperature and the inverter can reduce power, the heat pump can operate very efficiently.

Ideal for pools up to approx. 18,000 liters

For the normal swimming season from approximately May to August, we recommend the 6 kW version for pools up to approximately 18,000 liters.

Do you want to extend the swimming season from April to October? Then we recommend a pool volume of up to approximately 12,000 liters.

Under ideal conditions, the heat pump can be used for pools up to approximately 24 m³, but for a comfortable and realistic heating performance, we always advise taking the season and conditions into account.

The final performance is influenced by, among other things:

• Outside temperature

• Desired water temperature

• Wind

• Location of the pool

• Nighttime temperatures

• Pool insulation

• Use of a pool cover

A good cover is therefore strongly recommended.

Heating and cooling

The W’eau Mini Inverter 2.0 Plus features both a heating and cooling function.

During cooler days, you can heat the pool to a comfortable temperature. If the water becomes warmer than desired during a hot summer, the heat pump can also be used to lower the water temperature.

For heating, the temperature is adjustable between approximately 15°C and 40°C. In cooling mode, a temperature between approximately 8°C and 28°C can be set.

This gives you control over the temperature of your pool water throughout the entire swimming season.

Built-in Wi-Fi

The W’eau Mini Inverter 2.0 Plus 6 kW comes standard with integrated Wi-Fi.

This allows you to operate the heat pump via your smartphone. For example, you can easily adjust the desired water temperature without having to walk to the heat pump.

Of course, the heat pump can also be set directly via the control panel.

Silent operation

Despite its heating capacity, the 6 kW version remains relatively quiet.

Because the compressor and fan do not run at maximum power continuously thanks to the inverter technology, the noise level can be significantly reduced as soon as less heat is needed.

The stated noise level is approximately 41 to 47 dB(A) at a distance of 1 meter and approximately 26 to 32 dB(A) at a distance of 10 meters.

For even less transmission of vibrations to tiles, concrete, or other hard surfaces, you can combine the heat pump with W’eau vibration dampers for mini heat pumps.

Titanium heat exchanger

The W’eau Mini Inverter 2.0 Plus features a titanium heat exchanger.

The filtered pool water is passed through this heat exchanger, where it absorbs heat from the heat pump.

Titanium is highly resistant to pool water and also makes the heat pump suitable for use in combination with a saltwater system.

As a result, this heat pump can be used with both traditionally treated pool water and pools with salt electrolysis.

Handy 32/38 mm connections

The heat pump is equipped with 32/38 mm connections. This makes it particularly suitable for many above-ground pools and compact pool installations.

The heat pump is placed after the filter system. The water is filtered first, then flows through the heat pump, and is then returned to the pool heated.

For a powerful filter pump, we recommend using a bypass kit. This allows you to precisely regulate how much water flows through the heat exchanger.

Water flow

For proper operation, the heat pump requires sufficient water circulation. For the 6 kW model, a water flow rate of approximately 2.5 m³ per hour is specified.

In practice, some applications require a higher flow rate, depending on the installation used.

The built-in flow switch monitors whether there is sufficient water circulation. This allows the heat pump to detect when the filter pump is running and when the water flow stops.

Just on 230V

The W’eau Mini Inverter 2.0 Plus 6 kW does not require three-phase power.

The heat pump operates on 220-240V / 1 phase / 50 Hz. The maximum power consumption is approximately 1.60 kW and the maximum current is approximately 7.5 amperes.

This model combines a heating capacity of up to 6 kW with the convenience of a regular 230V installation.

Works down to -7°C outside temperature

The W’eau Mini Inverter 2.0 Plus has a wide operating temperature range of approximately -7°C to 43°C.

This allows you to use the heat pump not only during warm summer days but also during colder periods in the early and late season.

Keep in mind that the capacity of every air-source heat pump depends on the outside temperature. At lower outside temperatures, less heat is available from the outside air, and efficiency decreases.

Therefore, for use in April, September, and October, it is extra important to cover the pool well.

Automatic defrost function

When used at low outside temperatures, ice can form on the evaporator. The W’eau Mini Inverter 2.0 Plus therefore features an automatic defrost function via a 4-way valve.

This allows the heat pump to defrost itself if necessary and then resume the heating process.

This is especially important if you want to use the heat pump during colder periods of the swimming season.

Compact size, powerful performance

The strength of the W’eau Mini Inverter 2.0 Plus lies not only in its performance but also in its compact design.

With a size of approximately 47 x 43 x 51 cm, the heat pump takes up relatively little space. This makes it ideal if you are looking for a powerful heat pump without placing a large device next to the pool.

Always ensure sufficient free space around the heat pump during installation. The air intake and horizontal air outlet must not be blocked.

Powerful mini heat pump for a longer swimming season

The W’eau Mini Inverter 2.0 Plus swimming pool heat pump – 6 kW is an excellent choice if you are looking for a powerful yet compact heat pump.

With a recommended pool volume of up to approximately 18,000 liters during the normal swimming season and approx. 12,000 liters for a longer season, the 6 kW version offers significantly more possibilities than the smaller Mini Inverter models.

Thanks to the combination of Full Inverter technology, a COP up to 9.4, built-in Wi-Fi, titanium heat exchanger, heating and cooling function, automatic flow switch, and 230V connection, you get a remarkably complete pool heat pump.

This makes it easy to extend the swimming season and enjoy comfortably heated pool water, even when the Dutch or Belgian summer isn't cooperating.