Wybot C2 Pro Vision robotic pool cleaner

The WYBOT C2 Pro Vision is an advanced cordless robotic pool cleaner featuring a built-in camera, artificial intelligence, sonar, and gyroscopic navigation. The robot cleans the floor, walls, and waterline and can, thanks to its special Vision mode, recognize visible debris on the pool floor and target it directly.

With a suction capacity of 11.5 m³ per hour, three motors, and a dual filtration system, the C2 Pro Vision removes leaves, insects, hair, sand, and fine dirt. The combination of a 180-micron filter basket and an ultra-fine filter ensures that both coarse debris and small particles are captured.

The C2 Pro Vision operates on a built-in battery and therefore does not require a power cable during cleaning. Via the WYBOT app, you can select cleaning programs, path patterns, and timer settings. The robot is designed for various shapes, sizes, and pool surfaces and, according to European product information, can be used in pools up to approximately 200 m².

Camera with artificial intelligence

The main difference between the C2 Pro Vision and the regular C2 Pro is the front-facing camera. This camera is used to visually recognize debris on the pool floor.

In the special Vision or dirt-search mode, the robot scans its surroundings and looks for visible debris. As soon as the camera recognizes dirt, the robot can adjust its route and drive directly to the specific area. This means it does not have to rely solely on a fixed pattern and can pay extra attention to spots where there is actual debris.

The camera is only activated underwater. According to the manufacturer, the system uses artificial intelligence and machine learning software to further improve recognition and route selection. Software enhancements can be installed via OTA updates in the WYBOT app.

The camera's performance can be affected by water clarity, lighting, shadows, the color of the pool floor, and the visibility of the debris. A clean and undamaged camera lens is therefore important for good debris recognition.

Cleaning the floor, walls, and waterline

The WYBOT C2 Pro Vision can clean various parts of the pool separately or in combination:

• Floor cleaning: removes leaves, sand, hair, insects, and other settled debris.

• Wall cleaning: the robot climbs up suitable pool walls.

• Waterline cleaning: cleans the edge where grease, dirt, and deposits can accumulate.

• Floor and walls: combined program for a complete cleaning cycle.

• Full pool: cleans the floor, walls, and waterline within a single program.

• Vision mode: uses the camera to search for visible debris on the floor and target it for suction.

• Turbo floor program: focuses on powerful and intensive floor cleaning.

• Eco program: extends the operating time by using available energy more efficiently.

• Expert settings: provide additional options to customize cleaning behavior.

Actual performance on walls and at the waterline depends on the pool lining, slope angle, pool shape, and surface grip. Very slippery walls, sharp transitions, and complex steps can affect climbing ability.

Navigation with camera, sonar, and gyroscope

The C2 Pro Vision combines three navigation techniques:

• Camera: recognizes visible debris on the pool floor.

• Sonar sensors: help detect walls and obstacles.

• Gyroscope: registers movements and changes in direction.

By combining these systems, the robot can adjust its route to the pool environment. Three movement patterns for the floor and three for the walls are available via the app. This allows the route to be better tailored to the shape and layout of the pool.

The robot does not create a permanent 3D map like some household robot vacuums. The sensors and camera are used to support movements during cleaning and to target visible debris.

Dual filtration system down to approx. 10 microns

The WYBOT C2 Pro Vision features a dual filtration system:

1. A removable 180-micron filter basket for leaves, insects, hair, and other coarser debris.

2. An ultra-fine filter for smaller debris particles.

According to European product information, the combined filtration system can capture debris particles down to approximately 10 microns. This makes the robot suitable for finer dust and small debris that might otherwise flow through the system with only a coarse filter basket.

The filter basket is accessible from the top. After each cleaning session, the filter basket and the ultra-fine filter can be removed and rinsed with clean water. A clean filter ensures better water flow and maintains suction power.

The ultra-fine filter may become saturated more quickly with very fine dirt. In a heavily soiled pool, it may therefore be necessary to thoroughly clean the filters during or after each cycle.

Cordless operation with built-in battery

The C2 Pro Vision is completely cordless. During use, there is no power cable in the pool, and no connection to the skimmer or filter system is required.

The built-in battery has a capacity of 4,600 mAh and a voltage of 21.6 volts. In a standard program, the runtime is approximately two hours. In the energy-efficient Eco floor program, the runtime can reach up to approximately three hours according to the manual.

When the program is finished or the battery is nearly empty, the robot automatically drives to the edge of the pool. It can then be guided to the waterline using the included retrieval hook. Afterward, lift the robot vertically out of the water by the handle so that any water inside can drain out.

A full charge takes approximately three to three and a half hours. The robot must always be charged outside the pool with a dry charging port.

Operation with the WYBOT app

You can manage cleaning settings via the WYBOT app. The available options include:

• Choosing a cleaning program

• Selecting floor, wall, or waterline cleaning

• Activating Vision dirt-search mode

• Choosing a movement pattern

• Splitting the available battery life across multiple cycles

• Checking battery status

• Adjusting settings

• Installing OTA software updates

The wireless connection works best when the robot is out of the water or close to the water surface. Wireless signals are severely limited underwater. The app is therefore primarily intended for pre-selecting settings and does not function as a full live remote control.

Distributed timer programs

The available cleaning time can be divided into several shorter sessions. The European product information lists the following options:

• 1 cycle of 120 minutes

• 2 cycles of 60 minutes

• 3 cycles of 40 minutes

• 4 cycles of 30 minutes

This function can be used to perform multiple short maintenance sessions. The robot remains in the pool between the set cycles for this purpose. Afterward, it must be removed from the water, cleaned, and charged.

Available timer functions may change due to software updates or different product versions.

Suitable for various pools

The WYBOT C2 Pro Vision is designed for in-ground and suitable above-ground pools of various shapes:

• Rectangular pools

• Round pools

• Oval pools

• Free-form pools

According to the manufacturer, the robot can be used on common pool surfaces, including:

• Liner

• Tiles

• Concrete

• Polyester or pool shell

The current European product page specifies a recommended pool surface area of up to approximately 200 m². Some manuals mention a range of approximately 150 to 180 m². Practical capacity depends on the shape, amount of debris, selected cleaning mode, and the number of obstacles in the pool.

Package contents

• WYBOT C2 Pro Vision robotic pool cleaner

• Charger

• 180-micron filter basket

• Ultra-fine filter

• Floating components

• Retrieval hook

• User manual

• Quick start guide

Difference between the C2 Pro and C2 Pro Vision

The main difference is the camera. The standard WYBOT C2 Pro uses a gyroscope and sonar for its navigation. The WYBOT C2 Pro Vision adds a camera and AI-driven dirt recognition.

The Vision version can therefore recognize visible debris on the floor and drive directly toward it in the special dirt-search mode. The remaining basic performance, such as motor power, suction capacity, battery power, and dual filtration, is largely similar.

Conclusion

The WYBOT C2 Pro Vision is suitable for pool owners looking for a cordless pool robot with extensive cleaning capabilities and targeted debris recognition. The robot combines floor, wall, and waterline cleaning with a camera, artificial intelligence, sonar, and gyroscopic navigation.

The Vision mode is particularly advantageous when leaves or other clearly visible debris particles are frequently present on the floor. The dual filtration, powerful water flow, and extensive app settings make the robot suitable for thorough and regular pool maintenance.