Connecting your spa heat pump: here is how to do it!

Just as you’re getting nice and warm in your hot tub, the water starts to cool down... It could be better! With a hot tub heat pump, you can heat your spa water in a smart and energy-efficient way. This allows you to enjoy your moment of relaxation even longer, without your energy bill skyrocketing. And the best part is: you don't have to be an expert to connect a hot tub heat pump. It only takes a few steps! We’ll explain how.

Proper preparation: the checklist

A good start is half the battle! Before you start installing your hot tub heat pump, it is useful to check a few things. This way, you ensure that everything goes smoothly and avoid surprises. Check, check, double-check!

✅ Sufficient space – Ensure there is enough room for installation, maintenance, and air circulation.
✅ Measure pipe diameters – Check the diameter of your hot tub's pipes. This is often 60 mm or 48 mm.
✅ Electricity connection – Ensure there is a power point nearby. The heat pump requires a direct 230-volt connection.

By checking these points in advance, you’ll be ready for a smooth installation!

Where do you place your hot tub heat pump?

The right location for your hot tub heat pump is important to ensure optimal performance and a long lifespan. Here is what you should look out for:

🔹 Sheltered but well-ventilated spot – Place the heat pump on a flat and stable surface, preferably out of sight, but with sufficient air circulation.
🔹 Enough room around it – Keep at least 80 cm of space free on the sides and back, and 150 cm at the front for optimal airflow.
🔹 Not too far from the hot tub – The shorter the distance between the hot tub and the heat pump, the more efficient the heat transfer.

💡 Tip: Is the heat pump close to your living area? Use vibration dampers to reduce noise and vibrations!

How to connect your hot tub heat pump

Step 1: Power supply
Connect the heat pump to a separate 230-volt circuit. Do not use an extension cord or cable reel; use a direct power point.

Step 2: Connecting to the hot tub
🔹 Replacing electric heating? Connect the heat pump in the same spot in the pressure pipe.
🔹 Additional heating alongside existing? Place the heat pump before the electric heater so that it transfers the heat first.

Do you lack technical knowledge? A professional can help you connect the hot tub heat pump perfectly for optimal efficiency.

Extra easy: W’eau hot tubs with standard heat pump connector

Want to make it even easier for yourself? W’eau hot tubs come standard with a 50 mm heat pump connector, which makes it easy to do the installation yourself. With the right PVC pipe and insulation, you limit heat loss and maximize the benefits of your hot tub heat pump.

More heat, less hassle! This way, you can enjoy wonderfully warm hot tub water all year round without high energy costs.