Congratulations on your new inflatable spa! It's time to relax and enjoy the bubbles in your own garden. But before you can do that, you need to set up the spa. Don't worry, it's easier than you think! In this guide, we will walk you through the process step-by-step so you can enjoy your spa in no time.
1. Choose the right spot for your spa
The perfect spot for your spa should be flat, firm, and stable. You don't want to feel an uneven surface when you're sitting in the spa! In addition, there must be sufficient space for the pump, and a sheltered spot is ideal for reducing exposure to wind, rain, or bright sunlight. Once you've checked these factors off, you are ready to proceed!
2. Preparing the surface
Before you start setting it up, ensure that the surface is clean and free of sharp objects. This prevents damage and extends the lifespan of your spa.
Want extra insulation and protection? Use a special ground sheet or foam tiles. This not only provides a more comfortable surface but also helps to retain heat.
3. Check that all components are present
Before you start inflating, it's smart to check that all parts are complete. Use the parts list in the manual and verify that you aren't missing anything. This prevents frustration halfway through the setup.
Don't panic if you don't find something immediately: some accessories are optional and can be ordered later. But if something important is truly missing, contact the supplier before proceeding.
4. Placing the spa
Once the surface is ready and you have checked all the parts, you can lay out the spa.
🔹 Lay down a base protection sheet or ground sheet for extra protection.
🔹 Unfold the spa and ensure it is completely flat before you begin inflating.
Now you are ready for the next step: inflating the spa!
5. Inflating the spa
Time to get your spa into shape!
💨 Press the inflation button and let the spa fill itself with air. This process usually only takes a few minutes.
⚠ Note: Do not over-inflate the spa! Ensure it is firm, but not filled with too much air.
🌡 Tip: Set up the spa during the warmest part of the day. Air expands with heat, so if you inflate it to the maximum in the morning or evening, it could become over-inflated during the day.
Do you have an Intex spa? Then you are in luck! These spas are equipped with a pressure relief valve, so they are never over-inflated. Other spas do not have this, so pay close attention while inflating.
6. Filling the spa with water
Almost done! Ensure all drain plugs are properly closed before you start filling.
🚰 Use clean tap water and fill the spa to the indicated level.
🔥 The spa heats up by about 1-2.5°C per hour. Want to speed this up? Fill the spa with lukewarm water and cover it immediately with the cover.
Want to insulate even better? Use an extra cover to minimize heat loss. This way, your spa stays at temperature longer and you save energy!
Enjoy your bubble time!
Your spa is now completely ready for use! Time to relax and enjoy a wonderful bubble experience. Do you have any questions or are you encountering a problem? Contact one of our product experts, they will be happy to help you further.
Want to know more about spa maintenance? Then check out our advice article ‘Spa maintenance in 5 steps’. Want to save on energy? Then read our 5 tips to reduce your spa's power consumption.
Enjoy the bubbles!
