pH spa

With the Kokido buffer fluid you ensure that your digital pH meter always gives accurate measurements. This set contains two bottles of buffer fluid with different pH values: pH 7 and pH 4. This allows you to regularly calibrate and adjust the pH meter, so that you get reliable measurements of the pH value in your pool or spa. This is essential for maintaining clean, healthy water and ensures that you can maintain the correct chemical balance with confidence. The Kokido buffer fluid is used to perform a zero measurement or to calibrate the sensor of the pH meter. We recommend checking the meter regularly and recalibrating it 2-3 times per season for optimal operation. This way you can be sure that the measurements are always correct and you prevent problems with the water quality in your pool. With the Kokido buffer fluid you keep the performance of your pH meter in top condition and ensure a well-maintained swimming pool or spa, where the water balance is always at the right level.

Read more less

The pH value of the swimming pool water is important for optimal functioning of the chlorine products and should be maintained between 7.2 and 7.6. Consult your supplier if the pH value often needs to be corrected. Dissolve the product in a bucket of water and then spread evenly over the water surface. 80 grams (=50 ml) product per 10m³; water lowers the pH value by approximately 0.1. Never more than 300 grams (= 190 ml) per 10m³ per treatment; dose water at once. And any second treatment should only be carried out 12 hours after the first treatment. During the treatment the pump should be in operation for 3 to 4 hours. This agent can also be used to reduce the TA value (total alkalinity). The ideal TA value is 100-150 mg/l (ppm). To reduce the TA value by 10 mg/l, use 180 grams (115 ml) of product per 10 m³; water to be dosed Swimming pool content calculation: Rectangular pools: Length x Width x Average waterline Round pools: Diameter² x Average waterline x 0.78 Oval pools: Length x Width x Average waterline x 0.89 8-Shape pools: Length x Width x Average waterline x 0.85

Read more less

The pH value of the swimming pool water is important for optimal functioning of the chlorine products and should be maintained between 7.2 and 7.6. Consult your supplier if the pH value often needs to be corrected. Dissolve the product in a bucket of water and then spread evenly over the water surface. 80 grams (=80 ml) product per 10m³; water increases the pH value by approximately 0.1. Never more than 300 grams (= 300 ml) per 10m³ per treatment; dose water at once. And do not carry out a second treatment until 12 hours after the first treatment. During the treatment the pump should be in operation for 3 to 4 hours. Swimming pool content calculation: Rectangular pools: Length x Width x Average waterline Round pools: Diameter² x Average waterline x 0.78 Oval pools: Length x Width x Average waterline x 0.89 8-Shape pools: Length x Width x Average waterline x 0.85

Read more less

Are the values ​​of your swimming pool water not in order? W'eau pH minus powder easily lowers the pH value of your swimming pool so that you can make bombs again without any worries! This 1.5 kg package is perfect for above-ground pools or small inground pools and because of the powder form it dissolves almost immediately in the pool water. Instructions for use W'eau pH minus powder To know how much pH minus or pH plus you should add to your water, always measure the current pH value in advance. A good pH value is between 7.2 and 7.6. Mix the correct amount of pH powder in a bucket with warm or swimming pool water. You can read exactly how much to add on the packaging. Spread evenly over the pool and you're done! Safety instructions W'eau pH minus powder Never use W'eau pH minus powder at the same time as other chemicals such as chlorine and always add the powder to the water, never the other way around. Always store the powder in a safe, dry and cool place. Always read the safety instructions on the packaging before use!

Read more less

Are the values ​​of your swimming pool water not in order? W'eau pH minus powder easily lowers the pH value of your swimming pool so that you can make bombs again without any worries! This extra large package of 5 kg is suitable for even the largest above-ground or built-in swimming pools and due to the powder form it dissolves almost immediately in the pool water. Instructions for use W'eau pH minus powder To know how much pH minus or pH plus you should add to your water, always measure the current pH value in advance. A good pH value is between 7.2 and 7.6. Mix the correct amount of pH powder in a bucket with warm or swimming pool water. You can read exactly how much to add on the packaging. Spread evenly over the pool and you're done! Safety instructions W'eau pH minus powder Never use W'eau pH minus powder at the same time as other chemicals such as chlorine and always add the powder to the water, never the other way around. Always store the powder in a safe, dry and cool place. Always read the safety instructions on the packaging before use!

Read more less

Are the values ​​of your swimming pool water not in order? W'eau pH plus powder easily increases the pH value of your swimming pool so that you can make bombs again without any worries! This 1 kg pack is perfect for above-ground pools or small built-in pools and because of the powder form it dissolves almost immediately in the pool water. Instructions for use W'eau pH plus powder To know how much pH minus or pH plus you should add to your water, always measure the current pH value in advance. A good pH value is between 7.2 and 7.6. Mix the correct amount of pH powder in a bucket with warm or swimming pool water. You can read exactly how much to add on the packaging. Spread evenly over the pool and you're done! Safety instructions W'eau pH plus powder Never use W'eau pH plus powder at the same time as other chemicals such as chlorine and always add the powder to the water, never the other way around. Always store the powder in a safe, dry and cool place. Always read the safety instructions on the packaging before use!

Read more less

Are the values ​​of your swimming pool water not in order? W'eau pH plus powder easily increases the pH value of your swimming pool so that you can make bombs again without any worries! This extra large package of 5 kg is suitable for even the largest above-ground or built-in swimming pools and due to the powder form it dissolves almost immediately in the pool water. Instructions for use W'eau pH plus powder To know how much pH minus or pH plus you should add to your water, always measure the current pH value in advance. A good pH value is between 7.2 and 7.6. Mix the correct amount of pH powder in a bucket with warm or swimming pool water. You can read exactly how much to add on the packaging. Spread evenly over the pool and you're done! Safety instructions W'eau pH plus powder Never use W'eau pH plus powder at the same time as other chemicals such as chlorine and always add the powder to the water, never the other way around. Always store the powder in a safe, dry and cool place. Always read the safety instructions on the packaging before use!

Read more less