Hayward wall fitting 2″ – 250 mm – Concrete/liner – White

With the Hayward 3350 wall fitting, you can create a connection through the pool wall for a suitable return jet or vacuum connection. This version is 250 mm long, made of ABS and suitable for underground pools with a concrete or liner wall.

The wall fitting forms the connection between the connection point on the pool side and the pipe behind it. With a 2″ female thread inlet and a 50 mm internal / 2″ male thread outlet, this version offers various connection options for the piping system.

For return jets and vacuum connections

This wall fitting can be used with suitable return jets and vacuum connections. With a return jet, it forms the passage for the filtered water flowing back into the pool. With a vacuum connection, it connects the connection point in the wall to the corresponding suction pipe.

The wall fitting is therefore a built-in component. The final function is determined by the connected component and the pipe to which it is connected.

Length of 250 mm for installation in the wall

This version has a length of 250 mm. Before installation, check whether this length fits the wall thickness and the planned finish. Also take into account the space required for the connections on both sides.

By carefully determining the position during construction, return jets and vacuum connections can be placed at the desired height. Accurate alignment makes connection and finishing easier.

White ABS version

The wall fitting is made of ABS and comes in white. It is intended for use in concrete and liner pools. During installation, use the sealing materials and connection components that suit the wall construction and the chosen return jet or vacuum connection.

In a liner pool, the connection to the liner in particular requires the correct sealing. For this, follow the installation instructions of the components involved.

Connections for the pool system

On the inlet side, the wall fitting has a 2″ female thread. The outlet is equipped with a 50 mm internal connection and a 2″ male thread. This allows the connection to be adapted to the pipe and fittings used.

Check the connections for water tightness before the construction is permanently finished. Once installed, the wall fitting and the connections behind it are less easily accessible.