Intex C600 Filter Pump 12V – 2,271 liters/hour

Keep your pool water clean and clear with the Intex C600 filter pump. This compact cartridge filter pump has a pump capacity of 2,271 liters per hour and is a practical solution for smaller to medium-sized Intex pools.

The pump combines water circulation with filtration. The pool water is drawn in, passed through an Intex Type A filter cartridge, and then pumped back into the pool. Dirt particles remain trapped in the cartridge. The pump has an effective system flow rate of approximately 1,893 liters per hour.

2,271 liters per hour pump capacity

The C600 has a maximum water flow rate of 2,271 liters per hour. When accounting for resistance from the filter cartridge and hoses, the actual system flow rate is approximately 1,893 liters per hour.

This makes the C600 a great mid-range cartridge filter pump for above-ground pools where a smaller filter pump provides insufficient capacity, but a large sand filter system is not necessary.

Works with Intex Type A filter cartridges

The C600 uses the widely used Intex Type A filter cartridge. The pleated cartridge traps dirt particles as the water circulates through the pump.

A major advantage of a cartridge filter is its simple maintenance. Remove the cartridge from the housing and rinse it thoroughly with water regularly. When the cartridge is heavily soiled or worn, it can be easily replaced.

For intensive use, it is useful to always have one or more spare filters on hand.

Safe 12V version

This version of the Intex C600 operates on 12 volts and is used in combination with a transformer. The transformer converts the mains voltage to the low voltage the pump uses.

The pump is also double-insulated.

32 mm hose connections

The Intex C600 features 32 mm connections. This allows you to easily connect the pump to many Intex above-ground pools that also use 32 mm pool hoses.

Pay close attention to this when purchasing the C600 as a replacement filter pump. If your pool has standard 38 mm connections, this pump will not fit directly without suitable adapters.

Air release valve for easy commissioning

On top of the filter chamber is an air release valve. This allows you to release air that has become trapped in the filter housing.

Let the hoses and filter pump fill with water first and bleed the system before running the pump. Proper venting is important for good water circulation.

Suitable for various Intex pools

The C600 can be used with various Intex Easy Set, Metal Frame, and Rectangular Prism Frame pools with the correct 32 mm connections.

Intex/retailers mention, among others, Easy Set models up to Ø 457 cm, Metal Frame Ø 366 cm, and rectangular Prism Frame models up to approximately 400 cm.

However, when replacing an existing pump, do not only look at the outer dimensions of the pool. Also check the water volume, desired turnover rate, and connection diameter.

The capacity, connection, Type A cartridge, and power consumption of approximately 45 W are confirmed by multiple product specifications.

What is included?

Depending on the exact version, the C600 is supplied as a complete set with the filter pump, 12V transformer, two 32 mm pool hoses of approximately 150 cm, connection materials, and an Intex Type A filter cartridge.

Simple filtration for clear pool water

The Intex C600 Filter Pump – 2,271 liters/hour is an excellent choice if you are looking for a compact and user-friendly filtration solution for an Intex above-ground pool. Thanks to the 12V power supply, 32 mm connections, Type A filter cartridge, and pump capacity of 2,271 liters per hour, you have everything you need to circulate and filter the pool water daily.