Description
The W'eau Profi Heater is used to heat your swimming pool water. The Profi Heater is equipped with an adjustable thermostat. The interior of the housing and the heating element with temperature sensor are made of stainless steel. The Profi Heater can be connected using a hose (Ø25, 32, and 40 mm) or PVC pipe (Ø50 and 63 mm).
Capacity and consumption of the W'eau Profi Heater 3 kW
To raise the temperature of 1 m³ of water by 1°C in one hour, approximately 1,000 Watts are required. This formula is only an indication. The temperature depends on the surface area of the swimming pool, the ambient temperature, the cover, and any insulation.
Use and installation of the W'eau Profi Heater 3 kW
Heating a swimming pool with an electric heater is comparable to a kettle. Electricity is used to heat a coil. The pool water is then pumped along the coil by the pool pump. An electric heater is easy to install and operates completely independently.
Always install the Profi Heater horizontally, with the inlet and outlet facing upwards. This ensures that it always remains filled with water, even if the pump fails. Never switch the device on without water or with insufficient flow. Set the thermostat to the desired temperature. As soon as the set temperature is reached, the light will turn off. Always check the water temperature before getting into the pool.
Note: Electric pool heating must be installed covered/indoors. This is necessary because they are not resistant to various weather conditions.
