25 in stock
Ordered before 10:00 PM, shipped today
The W’eau winterizing liquid is an essential product for protecting your pool during the winter months. This powerful agent prevents the formation of algae and ensures that the pool water does not turn green. In addition, it helps prevent limescale buildup on the pool edges, keeping your pool looking fresh and clean come spring. What makes this winterizing liquid special is that it remains effective even when the pH levels of the water are not perfectly balanced. Proper winter preparation with this liquid ensures you can immediately enjoy clear pool water as soon as temperatures rise again.
The amount of winterizing liquid you need depends on the size of your pool. For powerful performance, we recommend 1 liter of liquid per 10m³ of water, although a standard dosage of 1 liter per 25m³ is often sufficient. For the best protection, perform this treatment twice per winter so that the pool remains well-protected throughout the entire winter season.
The winterizing liquid also has a long shelf life with no expiration date, so you can safely use any remainder the following winter.
Required amount of winterizing liquid (per winter):
15m³ pool: 3 liters
30m³ pool: 6 liters
45m³ pool: 9 liters
60m³ pool: 12 liters
75m³ pool: 15 liters
90m³ pool: 18 liters
Instructions for use of winterizing liquid:
Remove all visible debris from your pool.
Perform a shock treatment with chlorine shock to disinfect the water thoroughly.
Wait 24 hours after the chlorine treatment.
Add 1 liter of winterizing liquid per 10m³ and distribute it evenly throughout the pool.
Midway through winter, add another 1 liter of winterizing liquid per 15m³ of water.
It is not necessary to let the pool pump circulate after adding the liquid. Always follow safety instructions and wear gloves while using the winterizing liquid.
Safety instructions:
Always add the liquid to the water, never the other way around.
Wear protective gloves during use.
Store the liquid in a safe, dry, and cool place.
Rinse empty containers thoroughly with pool water before disposal.
The pool is not suitable for use while the liquid is active.
Features of the winterizing liquid:
Liquid form, easy to add to the pool water.
Suitable for use in all pools, including saltwater pools.
Works well in combination with other chemicals.
Prevents green water and limescale.
Effective even with off-balance pH levels.
With W’eau winterizing liquid, your pool is ready to get through the winter and you are guaranteed clean and clear water in the spring!
The AquaFinesse package offers a comprehensive and effective solution for cleaning and maintaining your spa water. The unique aspect of this product is that it replaces all necessary chemicals, allowing you to enjoy clean and clear spa water with minimal effort. This standard package contains everything you need to treat your spa for a period of 3 to 6 months.
What is in the AquaFinesse package?
The AquaFinesse package consists of:
2 bottles of AquaFinesse liquid (2 x 2 liters): This liquid softens the water and helps remove bacteria and biofilm without the need for additional chemicals.
18 cleaning tablets (20 grams each): The tablets disinfect the water through slow-release active ingredients that prevent limescale and other unwanted deposits.
Measuring cup: For accurately measuring the AquaFinesse liquid.
Tablet dispenser: For easy and even distribution of the tablets in the water.
Instructions for use
Weekly application: Add the prescribed amount of AquaFinesse liquid to the spa water. Place one cleaning tablet in the slow-release dispenser and place it in the filter.
Pumps and jets: Open all valves and jets and run the pumps at full power for approximately 1 minute. This ensures optimal distribution of the product in the water.
Filter maintenance: Rinse the filters weekly to remove accumulated dirt and maintain system efficiency.
Safety regulations
Keep out of reach of children: Ensure that children cannot access the products.
Do not combine with other chemicals: Never use AquaFinesse in combination with other spa cleaning products.
Read the safety instructions: AquaFinesse can be corrosive to metals and cause severe burns or eye damage. It can also cause respiratory irritation, so it is important to read and follow the safety instructions on the packaging.
Conclusion
The AquaFinesse package is an all-in-one solution for maintaining your spa. The package offers convenience, safety, and excellent water quality without the need to use multiple products. Despite the slightly higher price and the fact that it cannot be combined with other cleaning agents, AquaFinesse ensures long-lasting clean, soft, and bacteria-free spa water.
14 in stock
Ordered before 10:00 PM, shipped today
The Rijo winter product is an essential product for protecting your swimming pool during the winter months. This powerful agent prevents algae formation and ensures that the pool water does not turn green. Furthermore, it helps prevent limescale buildup on the pool edges, ensuring your pool looks fresh and clean again in the spring. What makes this winter product special is that it remains effective even when the water's pH levels are not perfectly balanced. Proper winter preparation with this liquid ensures that you can immediately enjoy clear swimming water as soon as the temperatures rise again.
The amount of winter liquid you need depends on the size of your swimming pool. For a powerful effect, we recommend 1 liter of liquid per 10m³ of water, although a standard dosage of 1 liter per 25m³ is often sufficient. For the best protection, perform this treatment twice during the winter so that the pool remains well-protected throughout the entire season.
The winter liquid also has a long shelf life, with no expiration date, so you can safely use any leftovers the following winter.
Required amount of winterizing liquid (per winter):
15m³ pool: 3 liters
30m³ pool: 6 liters
45m³ pool: 9 liters
60m³ pool: 12 liters
75m³ pool: 15 liters
90m³ pool: 18 liters
Instructions for use of winterizing liquid:
Remove all visible debris from your pool.
Perform a shock treatment with chlorine shock to disinfect the water properly.
Wait 24 hours after the chlorine treatment.
Add 1 liter of the winter product per 10m³ and distribute it evenly throughout the pool.
Halfway through the winter, add another 1 liter of winter product per 15m³ of water.
It is not necessary to circulate the pool pump after adding the liquid. Always follow the safety regulations and wear gloves when using the winter product.
Safety regulations:
Always add the liquid to the water, never the other way around.
Wear protective gloves during use.
Store the liquid in a safe, dry, and cool place.
Rinse empty packaging well with pool water before disposal.
The pool is not suitable for use while the liquid is active.
Features of the winterizing liquid:
Liquid form, easy to add to the pool water.
Suitable for use in all pools, including saltwater pools.
Works well in combination with other chemicals.
Prevents green water and limescale.
Works effectively at off-balance pH levels.
With the Ri.jo winter product, your pool is ready to get through the winter, and you are guaranteed clean and clear water in the spring!
40 in stock
Ordered before 10:00 PM, shipped today
The W'eau TA- Alkalinity 3 kg is an essential product for maintaining the chemical balance of your swimming pool water. This product helps to lower the total alkalinity (TA) of the water, which is important for keeping the pH level stable. A stable pH level ensures that your pool water is less sensitive to external factors such as weather changes and the use of chemicals. This extends the lifespan of your pool and makes it more pleasant to swim in.With this 3 kg package, you can easily adjust the alkalinity by adding the powder to water in a bucket and then distributing it evenly throughout the pool. The product dissolves quickly and ensures that the pH level remains stable for longer.The W'eau TA- Alkalinity 3 kg is a reliable choice for anyone who wants to keep swimming water healthy and clear by maintaining the correct alkalinity.
10 in stock
Ordered before 10:00 PM, shipped today
Enjoy a wonderfully clean and fresh inflatable spa worry-free with the AquaFinesse water treatment kit. This innovative all-in-one package has been specially developed to make spa maintenance easier, faster, and more effective. Thanks to its unique composition, AquaFinesse helps remove bacteria and prevents the buildup of biofilm, limescale, and unpleasant odors.
With just one weekly addition, you keep the spa water crystal clear and comfortably soft on the skin. The kit contains everything you need to get started right away: a bottle of AquaFinesse liquid, a jar of granules, and a handy measuring cup. This makes maintaining your inflatable spa a piece of cake
With W’eau TA- Alkalinity - 5 kg, you can easily and effectively lower the total alkalinity of your pool water. Proper alkalinity ensures a stable pH level, which is essential for a healthy water balance. This powder helps make the pH level less susceptible to external influences, such as the weather or an excess of chemicals. W’eau TA- is quickly soluble and easy to dose manually, keeping your pool water in top condition. Thanks to the large 5 kg packaging, this product is ideal for larger pools or long-term use. Ensure a safe and stable pH level and prevent problems such as corrosion or skin irritation.The W’eau TA- Alkalinity - 5 kg is a reliable solution for lowering the alkalinity of your pool water and thereby stabilizing the water balance. Ideal for a safe and pleasant swimming environment!
23 in stock
Ordered before 10:00 PM, shipped today
With W’eau TA+ Alkalinity - 1 kg you ensure that the alkalinity of your pool water remains optimal, which is essential for a stable pH value. By increasing the total alkalinity with TA+ powder, the pH value becomes less sensitive to fluctuations caused by weather conditions or the use of chemicals. This helps maintain a safe and comfortable water balance, which improves both the lifespan of your pool and your swimming comfort. The dosage of the powder is easy to adjust to the size of your pool, and with a few simple steps, you ensure that the water is back to the right level. Ideal for anyone who wants to keep their pool water healthy and balanced.The W’eau TA+ Alkalinity helps keep your pool water in top condition by ensuring a stable pH value, which is crucial for a safe and comfortable swimming environment.
W'eau Jet Clean - 500 ml is a powerful cleaner specially designed to remove oils, dirt, and mineral deposits from the pipes and jets of your spa. This 'invisible cleaner' targets the parts of the spa you don't see, but which are essential for proper water flow and the maintenance of your equipment. By cleaning the pipes and jets, W'eau Jet Clean prevents the buildup of dirt that can restrict water circulation and cause potential damage to the equipment. We recommend using the product every three months, just before changing the water, to ensure your spa continues to function optimally.
Safety instructions:
Causes skin irritation and serious eye damage.
Very toxic to aquatic life with long-lasting effects.
Always wear protective gloves and keep the product out of reach of children.
Store the product in a well-ventilated area and in a tightly closed container.
W'eau Jet Clean is the ideal solution to ensure that your spa always functions properly and remains free from harmful buildups of dirt, oils, and minerals.
20 in stock
Ordered before 10:00 PM, shipped today
Is the pH level of your pool water too high? With Rijo pH powder, you lower the pH level and bring the water back within the recommended range for your pool. The package contains 1.5 kg and is intended for targeted corrections based on a measurement.
Why is the correct pH level important?
The pH level indicates how acidic or alkaline your pool water is. If the pH is too high, chlorine works less effectively and the chance of limescale buildup increases. By testing the water regularly, you will notice a deviation in time and can make targeted adjustments. The amount of powder you need depends on the measured pH level and the water volume of your pool.
How do you use Rijo pH powder?
Measure the pH level with a pool water tester.
Determine the dosage based on the label, your measurement result, and the water volume of your pool.
Add the powder according to the instructions on the packaging. Follow the prescribed method of addition and never mix the product directly with other pool chemicals.
Measure again after the product has had time to work according to the instructions. Use that new measurement to determine if further correction is needed.
23 in stock
Ordered before 10:00 PM, shipped today
The W'eau TA- Alkalinity 1 kg is an essential product for maintaining the chemical balance of your pool water. This product helps to lower the total alkalinity (TA) of the water, which is important for keeping the pH value stable. A stable pH value ensures that your pool water is less sensitive to external factors such as weather changes and the use of chemicals. This extends the lifespan of your pool and makes it more pleasant to swim in.
With this 1 kg package, you can easily adjust the alkalinity by adding the powder to water in a bucket and then distributing it evenly throughout the pool. The product dissolves quickly and ensures that the pH value remains stable for longer.The W'eau TA- Alkalinity 1 kg is a reliable choice for anyone who wants to keep their swimming water healthy and clear by maintaining the correct alkalinity levels.
Rijo Clear Water flocculant is an effective liquid specially developed to clump fine and suspended dirt particles in spa and pool water into larger flakes. This allows these particles to be more easily captured by the filter system or removed manually, resulting in clear and clean water. Thanks to its liquid form, it works faster and is more accurately dosed than traditional flocculant tablets. This flocculant is highly suitable for preventive maintenance and can be safely used in combination with other water treatment products.
The Rijo winter product is an essential product for protecting your swimming pool during the winter months. This powerful agent prevents the formation of algae and ensures that the pool water does not turn green. Furthermore, it helps to counteract the formation of limescale on the pool edges, so that your pool looks fresh and clean again in the spring. What makes this winter product special is that it remains effective even when the pH levels of the water are not perfectly balanced. Proper winter preparation with this liquid ensures that you can immediately enjoy clear swimming water as soon as the temperatures rise again.
The amount of winter liquid you need depends on the size of your swimming pool. For powerful results, we recommend 1 liter of liquid per 10m³ of water, although a standard dosage of 1 liter per 25m³ is often sufficient. For the best protection, perform this treatment twice per winter so that the pool remains well-protected throughout the entire season.
The winter liquid also has a long shelf life, with no expiration date, so you can safely use any leftovers the following winter.
Required amount of overwintering liquid (per winter):
15m³ pool: 3 liters
30m³ pool: 6 liters
45m³ pool: 9 liters
60m³ pool: 12 liters
75m³ pool: 15 liters
90m³ pool: 18 liters
Instructions for use of overwintering liquid:
Remove all visible debris from your swimming pool.
Perform a shock treatment with chlorine shock to disinfect the water thoroughly.
Wait 24 hours after the chlorine treatment.
Add 1 liter of winter product per 10m³ and distribute it evenly throughout the pool.
Midway through the winter, add another 1 liter of winter product per 15m³ of water.
It is not necessary to keep the pool pump circulating after adding the liquid. Always follow safety regulations and wear gloves while using the winter product.
Safety regulations:
Always add the liquid to the water, never the other way around.
Wear protective gloves during use.
Store the liquid in a safe, dry, and cool place.
Rinse empty packaging well with pool water before disposal.
The pool is not suitable for use while the liquid is active.
Features of the overwintering liquid:
Liquid form, easy to add to the pool water.
Suitable for use in all pools, including saltwater pools.
Works well in combination with other chemicals.
Prevents green water and limescale.
Works effectively at irregular pH levels.
With the Ri.jo winter product, your pool is ready to get through the winter, and you are assured of clean and clear water in the spring!
10 in stock
Ordered before 10:00 PM, shipped today
With W’eau TA+ Alkalinity - 3 kg, you ensure that the alkalinity of your pool water remains optimal, which is essential for a stable pH value. By increasing the total alkalinity with TA+ powder, the pH value becomes less susceptible to fluctuations caused by weather conditions or the use of chemicals. This helps maintain a safe and comfortable water balance, which improves both the lifespan of your pool and swimming comfort. The dosage of the powder is easy to adjust to the size of your pool, and with a few simple steps, you ensure the water is back to the correct level. Ideal for anyone who wants to keep their pool water healthy and balanced.The W’eau TA+ Alkalinity helps keep your pool water in top condition by guaranteeing a stable pH value, which is crucial for a safe and comfortable swimming environment.
22 in stock
Ordered before 10:00 PM, shipped today
Rijo Clear Water Flocculant – 1 liter
Does your pool water look dull or cloudy, even after the filter has run? Fine dirt particles can remain suspended in the water because they are too small to be effectively captured by the filter. Rijo Clear Water is a liquid flocculant that brings these particles together into larger clumps. This makes it easier to remove fine dirt from the pool water.
How does Rijo Clear Water work?
The flocculant causes small, suspended particles to clump together. Depending on the prescribed treatment, the filter system can capture the formed clumps, or you can vacuum the settled dirt from the bottom. Especially if the water still has a haze after you have removed leaves and other coarse debris, a floc treatment can help make the water clear again.
Usage and dosage
Check the water parameters beforehand and look at the label to see if the product is suitable for your filter type. Measure out the prescribed amount based on the volume of your pool. Follow the instructions on the packaging for adding the product, the contact time, and the removal of the formed clumps.
80 in stock
Ordered before 10:00 PM, shipped today
Using chlorine shock is ideal when you want to quickly bring the water to the right level. Because it is unstabilized chlorine, it works quickly and effectively. For proper operation, the pH value must be between 7.2 and 7.6, so always test the water beforehand. Mix the correct amount of chlorine granules in a bucket with pool water or warm water. Then, distribute the mixed solution throughout the pool.Specifications:Color: whiteGender: unisexMaterial: plasticContent: 1 kgpH value: 7.2 - 7.6
12 in stock
Ordered before 10:00 PM, shipped today
Protect and care for your spa cover with Rijo Cover Shine spray. This high-quality maintenance spray makes your cover water-repellent, helps against discoloration due to UV radiation, and prevents dirt from sticking easily. This extends the lifespan of your spa cover and keeps it looking like new – with a beautiful, fresh shine.
🧾 Instructions for use
Spray the Rijo Cover Shine spray evenly onto a dry spa cover.
Use a dry, lint-free cloth to distribute the product.
Use circular motions until the cover begins to shine nicely.
Use regularly for lasting results.
⚠️ Safety instructions
Keep out of reach of children.
Use only in a well-ventilated area.
Store the bottle closed and in a cool, dry place.
Consult the label for additional safety information.
Do you want clean and clear spa water without the hassle of different chemicals? With AquaPerfect 2.0 All-in-One, you get an organic and chlorine-free total solution for your spa maintenance. This product is not only effective, but also easy to use and more affordable than many other all-in-one water treatment products.
With this large 4-litre bottle, you can optimally maintain your spa all year round. AquaPerfect 2.0 prevents limescale, biofilm, and cloudy water, while stabilizing the water balance and ensuring soft and pleasant water quality.
Thanks to the weekly dosage, your spa remains clean and fresh, without the need for chlorine, pH correctors, or other chemicals. A sustainable and eco-friendly choice for worry-free spa maintenance!With AquaPerfect 2.0 All-in-One (4L), you have a simple, effective, and eco-friendly way to maintain your spa. No hassle with multiple chemicals – just a weekly dosage for worry-free and clean spa water!
20 in stock
Ordered before 10:00 PM, shipped today
Rijo Anti-Alg is a powerful liquid algaecide specially developed to prevent and combat algae growth in swimming pools, spas, and hot tubs. This product works preventively against various types of algae (green, brown, black) and helps keep the water crystal clear, without negatively affecting water quality or the filtration system.
The liquid formula is easy to dose, instantly soluble in water, and compatible with chlorine, bromine, and saltwater systems. The product can be used at startup, for regular maintenance, and as an intensive treatment for sudden algae growth.
🧾 Usage and Dosage
Application
Dosage
Start-up treatment for green water
approx. 30 ml per 1,000 liters
Maintenance (preventive)
approx. 8 ml per 1,000 liters weekly
After heavy rainfall
8 ml per 1,000 liters extra
Winter treatment
approx. 50 ml per 1,000 liters
Instructions for use
Check the pH level of the water (target range: 7.2 – 7.6).
Start with a shock treatment with chlorine in case of cloudy or green water.
Add the correct amount of Anti-Alg, preferably into the skimmer or directly into circulating water.
Let the pump run for at least 24 hours.
Brush any slippery surfaces and clean filters if necessary.
Repeat preventive dosage weekly.
✅ Safety regulations
Always add product to water, never the other way around.
Wear gloves and safety goggles when dosing.
Avoid contact with skin, eyes, and clothing.
Keep out of reach of children.
Do not mix with other chemicals.
💡 Extra tips for clear water
Combine Anti-Alg with shock chlorination for maximum effectiveness.
Check pH and chlorine levels weekly.
Use a flocculant to remove fine floating particles.
Brush the walls and floor regularly to break down biofilm.
74 in stock
Ordered before 10:00 PM, shipped today
Protect and care for your spa cover with the W’eau Cover Shine spray. This high-quality maintenance spray makes your cover water-repellent, helps protect against discoloration due to UV radiation, and prevents dirt from adhering easily. This extends the lifespan of your spa cover and keeps it looking like new – with a beautiful, fresh shine.
🧾 Instructions for use
Spray the W’eau Cover Shine spray evenly onto a dry spa cover.
Use a dry, lint-free cloth to spread the product.
Use circular motions until the cover begins to shine beautifully.
Use regularly for lasting results.
⚠️ Safety instructions
Keep out of reach of children.
Use only in a well-ventilated area.
Store the bottle closed and in a cool, dry place.
Consult the label for additional safety information.
Perfect for those who want to maintain their spa or jacuzzi neatly and sustainably.
20 in stock
Ordered before 10:00 PM, shipped today
Does your pool water's pH level fluctuate rapidly? Then low total alkalinity may be one of the causes. Rijo TAC+ Alkalinity increases the total alkalinity of your pool water. Use the product when a test indicates that the TAC level is too low. The package contains 1 kg.
What does TAC+ do for your pool water?
The total alkalinity, also known as TAC, indicates how well the pool water can absorb changes in pH. With a low TAC level, the pH can react more strongly to, for example, fresh tap water or a pH correction. By bringing the alkalinity within the recommended range for your pool, you help keep the pH more stable.
The TAC level and the pH measure slightly different things. Therefore, measure both values before adding a product. This way you will know whether the water needs a correction of the alkalinity, the pH, or both.
How do you use Rijo TAC+ Alkalinity?
Measure the total alkalinity and pH with a water tester that indicates both values.
Determine the amount based on the measured TAC level, the water volume of your pool, and the dosage on the label.
Add TAC+ according to the instructions for use on the package. Never mix the product directly with other pool chemicals.
Measure again after the prescribed contact time. Check both the TAC and the pH before adjusting further.
10 in stock
Ordered before 10:00 PM, shipped today
The W’eau winterizing fluid is an essential product for protecting your swimming pool during the winter months. This powerful agent prevents algae formation and ensures the pool water does not turn green. Furthermore, it helps prevent limescale buildup on the pool walls, so your pool looks fresh and clean again in the spring. What makes this winterizing fluid special is that it remains effective even when the pH levels of the water are not perfectly balanced. Proper winter preparation with this fluid ensures that you can enjoy clear swimming water as soon as temperatures rise again.
The amount of winterizing fluid you need depends on the size of your pool. For a powerful effect, we recommend 1 liter of fluid per 10m³ of water, although a standard dosage of 1 liter per 25m³ is often sufficient. For the best protection, perform this treatment twice per winter so that the pool remains well protected throughout the entire winter season.
The winterizing fluid also has a long shelf life with no expiration date, so you can safely use whatever is left over the following winter.
Required amount of winterizing fluid (per winter):
15m³ pool: 3 liters
30m³ pool: 6 liters
45m³ pool: 9 liters
60m³ pool: 12 liters
75m³ pool: 15 liters
90m³ pool: 18 liters
Instructions for use of winterizing fluid:
Remove all visible dirt from your pool.
Perform a shock treatment with chlorine shock to disinfect the water thoroughly.
Wait 24 hours after the chlorine treatment.
Add 1 liter of winterizing fluid per 10m³ and distribute it evenly across the pool.
Halfway through the winter, add another 1 liter of winterizing fluid per 15m³ of water.
It is not necessary to let the pool pump circulate after adding the fluid. Always follow the safety regulations and wear gloves when using the winterizing fluid.
Safety regulations:
Always add the fluid to the water, never the other way around.
Wear protective gloves during use.
Store the fluid in a safe, dry, and cool place.
Rinse empty packaging well with pool water before disposal.
The pool is not suitable for use while the fluid is active.
Features of the winterizing fluid:
Liquid form, easy to add to the pool water.
Suitable for use in all pools, including saltwater pools.
Works well in combination with other chemicals.
Prevents green water and limescale buildup.
Works effectively at fluctuating pH levels.
With the W’eau winterizing fluid, your pool is ready to get through the winter and you are assured of clean and clear water in the spring!
22 in stock
Ordered before 10:00 PM, shipped today
The W'eau Clear Water flocculant is an effective liquid specially developed to clump fine and suspended dirt particles in spa and pool water into larger flakes. This allows these particles to be more easily captured by the filter system or removed manually, resulting in clear and clean water. Thanks to its liquid form, it works faster and is more precise to dose than traditional flocculant tablets. This flocculant is highly suitable for preventive maintenance and can be safely used in combination with other water treatment products.
11 in stock
Ordered before 10:00 PM, shipped today
The W'eau Slat Cleaner has been specially developed to effectively remove limescale and dirt from pool slats and other surfaces. This powerful cleaning formula ensures your pool slats remain clean and shiny, and prevents unnecessary wear and tear. Regular use of this slat cleaner extends the lifespan of your cover and keeps your pool hygienic and fresh.
Simple and effective to use The W'eau Slat Cleaner is easy to use and provides effective results. It is recommended to use the cleaner approximately twice a year for optimal maintenance of your pool slats. The cleaner is suitable for all types of slats and pool covers. Using it is simple: dampen the slats, apply the diluted cleaner, let it soak in, and then rinse thoroughly with a pressure sprayer. After treatment, it is important to restore the pH level of the pool water by backwashing the filter well.
How do you use the W'eau Slat Cleaner?
First, dampen the slats with water.
Dilute the cleaner: use 1 liter of W'eau Slat Cleaner to 3 liters of water per 10 m² and apply with a mist sprayer.
Let the cleaner soak in for 1 to 2 hours to effectively loosen limescale and dirt.
Rinse the slats thoroughly with a pressure sprayer to remove the residue.
Don't forget to backwash the filter and increase the pH level of the pool water after treatment.
Conclusion The W'eau Slat Cleaner is an essential cleaner for pool owners who want to keep their slats clean, shiny, and in good condition. With its powerful formula, it is the perfect solution for removing stubborn limescale and dirt. This cleaner ensures a longer lifespan for your cover and makes maintenance simple and effective.
20 in stock
Ordered before 10:00 PM, shipped today
Rijo TAC- Alkalinity – 1 kg
Is the total alkalinity of your pool water too high? With Rijo TAC- Alkalinity, you can specifically lower this water parameter. The package contains 1 kg. How much you need depends on the measured alkalinity and the amount of water in your pool.
What is total alkalinity?
The total alkalinity, also known as TAC, indicates how well the water can absorb changes in pH. If the alkalinity is too high, it can be more difficult to adjust the pH level. Therefore, it is useful to measure both values before adding a corrective agent.
Do you measure a TAC value that is too high? Then you can use Rijo TAC- to lower the alkalinity. After that, also check the pH again, because it may drop when the alkalinity is lowered.
How do you use Rijo TAC- Alkalinity?
Measure the total alkalinity and the pH with a water tester that can measure both values.
Determine the dosage based on the measured TAC value, the water volume of your pool, and the instructions on the packaging.
Add the product as indicated on the label. Never mix the product directly with other pool chemicals.
Measure the TAC and pH again after the contact time stated on the packaging. Based on that measurement, determine whether further correction is needed.
20 in stock
Ordered before 10:00 PM, shipped today
Rijo Anti-Alg is a powerful liquid algaecide specially developed to prevent and combat algae growth in swimming pools, spas, and hot tubs. This product acts preventively against various types of algae (green, brown, black) and helps to keep the water crystal clear, without negatively affecting water quality or the filter system.
The liquid formula is easy to dose, dissolves instantly in water, and is compatible with chlorine, bromine, and saltwater systems. The product can be used for start-up, regular maintenance, and as an intensive treatment for sudden algae growth.
🧾 Usage and Dosage
Application
Dosage
Initial treatment for green water
approx. 30 ml per 1,000 liters
Maintenance (preventive)
approx. 8 ml per 1,000 liters weekly
After heavy rainfall
8 ml per 1,000 liters extra
Winter treatment
approx. 50 ml per 1,000 liters
Instructions for use
Check the pH value of the water (target value: 7.2 – 7.6).
Start with a shock treatment with chlorine in case of cloudy or green water.
Add the correct amount of Anti-Alg, preferably into the skimmer or directly into circulating water.
Let the pump run for at least 24 hours.
Brush smooth surfaces if necessary and clean filters.
Repeat preventive dosage weekly.
✅ Safety Instructions
Always add product to water, never the other way around.
Wear gloves and safety glasses when dosing.
Avoid contact with skin, eyes, and clothing.
Keep out of reach of children.
Do not mix with other chemicals.
Commercial USPs for Webshop or Flyer
Ready to use: No complicated steps, just add it.
Highly effective against green algae – keeps water crystal clear.
Prevents expensive repairs due to buildup in pipes and filters.
Also suitable for spa and hot tub: one product for all your water.
💡 Extra tips for clear water
Combine Anti-Alg with shock chlorination for maximum effectiveness.
Check pH and chlorine levels weekly.
Use a flocculant to remove fine floating particles.
Brush the walls and floor regularly to break up biofilm.
10 in stock
Ordered before 10:00 PM, shipped today
With Rijo TAC+ Alkalinity - 3 kg, you ensure that the alkalinity of your pool water remains optimal, which is essential for a stable pH value. By increasing the total alkalinity with TA+ powder, the pH value becomes less sensitive to fluctuations caused by weather conditions or the use of chemicals. This helps in maintaining a safe and comfortable water balance, which improves both the lifespan of your pool and your swimming comfort. The dosage of the powder is easy to adjust to the size of your pool, and with a few simple steps, you can ensure the water is back to the correct level. Ideal for anyone who wants to keep their pool water healthy and balanced.The Rijo TAC+ Alkalinity helps keep your pool water in top condition by guaranteeing a stable pH value, which is crucial for a safe and comfortable swimming environment.
23 in stock
Ordered before 10:00 PM, shipped today
With the W’eau TA+ Alkalinity - 1 litre, you lay the foundation for a stable water balance in your spa. This alkalinity increaser is essential for preventing fluctuations in the pH level. Properly regulated alkalinity helps keep the pH level constant, which improves the overall water quality and safety in your spa. By adding W’eau TA+ regularly, you reduce the risk of corrosion and skin or eye irritation that can be caused by unstable pH levels. The product is easy to use: add a small amount, let it circulate, and then measure the alkalinity to ensure it falls within the desired range of 80 to 120 ppm.With W’eau TA+, you ensure that the alkalinity of your spa remains at the correct level, resulting in a more stable pH level and better water quality, for safe and enjoyable spa use.
W'eau Filter Cleaner contains a concentrated formula for deep filter cleaning. W'eau Filter Cleaner removes dirt, oil, grease, and limescale from your spa filter in just one night. Extremely useful for filter cartridges, but can also be used for sand filters and DE filters.
Instructions for W'eau Filter Cleaner
Remove the spa filter from your spa
Fill a bucket with 30 litres of clean water
Add 150 ml of W'eau Filter Cleaner and mix it well with the water
Place the filter in the bucket and ensure it is submerged
Leave the filter in the bucket for at least 3 hours; preferably overnight
Remove the filter from the bucket and rinse it with clean water
Place the filter back into your spa
Safety instructions W'eau Filter Cleaner
Always wear protective gloves when using W'eau Filter Cleaner. Keep the product out of reach of children and store it in a closed container in a well-ventilated area. Always read the safety instructions on the packaging.
Features W'eau Filter Cleaner
Liquid form
Content: 1 litre
Are you looking for a simple and effective way to keep your pool water clean and clear? The AquaFinesse Pool Puck 30 offers an innovative solution that simplifies your pool maintenance while improving water quality.
The Pool Puck is an all-in-one tablet that helps remove biofilm from pipes and surfaces while optimizing water balance. This keeps the water soft, clear, and free from limescale, and reduces the need for chemicals. The AquaFinesse formula prevents bacteria from attaching easily, significantly reducing the need for chlorine and other disinfectants.
With just one Pool Puck per week, you can enjoy clean and fresh pool water without the hassle of traditional water treatment!
The AquaFinesse Pool Puck 30 is the ultimate solution for those looking for easy and effective pool maintenance. With fewer chemicals and less effort, you can enjoy clear, soft, and clean water – week after week!
20 in stock
Ordered before 10:00 PM, shipped today
Would you like to retain the heat in your pool water for longer? Rijo Heat Shield forms a thin, invisible layer on the water surface. This layer reduces evaporation and thus helps to limit heat loss. You dose the product directly into the pool water. For this application, you do not need to roll out a pool cover.
How does a liquid pool cover work?
When pool water evaporates, heat is also lost. Heat Shield spreads over the surface and forms a thin film there that slows down evaporation. As a result, you need to refill the water less often and your pool heater can replace less heat. The effect depends on factors including the wind, the water temperature and the conditions around your pool.
Use and dosage
Heat Shield is suitable for indoor and outdoor pools and can be used in combination with a standard chlorine treatment. The recommended dosage is approximately 150 ml per week per 50 m³ of pool water. Adjust the dosage to the volume of your pool and follow the instructions on the label for the method of addition.
With a package of 5 liters, at that recommended dosage you have approximately 33 weekly doses for a pool of 50 m³.
W'eau Anti-Algae is a powerful liquid algaecide specifically developed to prevent and combat algae growth in swimming pools, spas, and hot tubs. This product works preventively against various types of algae (green, brown, black) and helps keep the water crystal clear, without negatively impacting water quality or the filtration system.
The liquid formula is easy to dose, dissolves instantly in water, and is compatible with chlorine, bromine, and saltwater systems. The product can be used for start-up, regular maintenance, and as an intensive treatment for sudden algae growth.
🧾 Usage and Dosage
Application
Dosage
Initial treatment for green water
approx. 30 ml per 1,000 liters
Maintenance (preventive)
approx. 8 ml per 1,000 liters weekly
After heavy rainfall
an additional 8 ml per 1,000 liters
Winter treatment
approx. 50 ml per 1,000 liters
Instructions for use
Check the pH level of the water (target range: 7.2 – 7.6).
Start with a chlorine shock treatment if the water is cloudy or green.
Add the correct amount of Anti-Algae, preferably into the skimmer or directly into circulating water.
Let the pump run for at least 24 hours.
Brush smooth surfaces if necessary and clean filters.
Repeat the preventive dosage weekly.
✅ Safety instructions
Always add product to water, never the other way around.
Wear gloves and safety goggles when dosing.
Avoid contact with skin, eyes, and clothing.
Keep out of reach of children.
Do not mix with other chemicals.
💡 Extra tips for clear water
Combine Anti-Algae with shock chlorination for maximum effectiveness.
Check pH and chlorine levels weekly.
Use a flocculant to remove fine floating particles.
Brush the walls and floor regularly to break up biofilm.
Save energy and keep your pool warm for longer
With the Rijo Heat Shield Liquid Pool Cover – 1 Liter, you create an invisible, heat-insulating layer on the water surface of your swimming pool. This innovative liquid cover helps reduce heat loss, limits water evaporation, and ensures that the pool stays at temperature for longer. As a result, you use less energy to heat the water and save on water and maintenance costs.
Unlike a traditional summer cover, you do not need to place or store a heavy tarp. The liquid cover works completely automatically and is invisible while swimming.
Invisible protective layer
Rijo Heat Shield forms an ultra-thin, biodegradable layer on the water surface. This layer reduces water evaporation, which directly results in less heat loss. Because the majority of heat loss occurs through evaporation, using a liquid pool cover can contribute significantly to lower energy consumption.
The protective layer restores itself automatically when the water moves or when people are swimming.
Less evaporation, less energy consumption
By limiting water evaporation, not only is heat better retained, but you also need to refill the water less frequently. Additionally, pool chemicals such as chlorine remain effective for longer because less water is lost.
This makes Rijo Heat Shield an excellent choice for both pools with a heat pump and pools heated with solar collectors, electric heaters, or heat exchangers.
Suitable for almost any pool
Rijo Heat Shield is suitable for:
Above-ground pools
In-ground pools
Indoor pools
Outdoor pools
Chlorine pools
Saltwater pools
Pools with automatic disinfection systems
The liquid cover does not affect the operation of filters, skimmers, or pool pumps and can be used safely in combination with most pool installations.
Easy to use
Add the recommended amount of Heat Shield directly to the pool water. The liquid spreads across the entire water surface by itself and immediately forms an insulating layer.
For optimal results, it is recommended to replenish the dosage regularly, depending on the size of the pool, the outside temperature, and the intensity of use.
Environmentally friendly and safe
Rijo Heat Shield is biodegradable and safe for swimmers when applied according to the instructions. Because less water evaporates and less energy is required to heat the pool, you also contribute to more sustainable pool maintenance.
40 in stock
Ordered before 10:00 PM, shipped today
With the Rijo Outside Cleaner – 1 Liter, you can easily clean the exterior of your spa, pool, or swimming pool accessories. This powerful, user-friendly cleaner removes dirt, dust, grease, grime, and weather stains without damaging plastic surfaces. This keeps your pool or spa looking well-maintained and like new all season long.The Rijo Outside Cleaner has been specially developed for cleaning the outer walls of above-ground pools, spas, filter housings, plastic panels, and other non-porous surfaces around the pool.For a fresh and well-maintained lookOver time, rain, dust, sunscreen, grease, and other contaminants can accumulate on the outside of a pool or spa. With Rijo Outside Cleaner, you can remove this dirt quickly and effectively, ensuring the original color and appearance are preserved.Regular cleaning prevents dirt from setting in and makes future maintenance easier.Safe for plastic surfacesThe formula is specially designed for plastic and coated surfaces. This allows you to safely use the cleaner on most pool and spa exteriors without damaging the material, provided it is used according to the instructions.Easy to useSpray or apply the cleaner to a damp cloth, sponge, or soft brush. Let the product sit for a moment, then wipe the surface clean or rinse with fresh water if necessary.For stubborn dirt, the treatment can easily be repeated.Versatile applicationRijo Outside Cleaner is suitable for cleaning, among other things:
Above-ground pools
Spas and hot tubs
Plastic pool panels
Filter housings
Pool ladders
Pool furniture
PVC parts
Other plastic pool accessories
Regular maintenance extends service lifeBy regularly cleaning the outside of your pool or spa, you prevent stubborn buildup and help the material retain its neat appearance for longer. This contributes not only to the look of your pool but also to the longevity of the materials.
A leaking pool or spa? No panic! With Rijo Leak Sealer, you have a powerful and effective liquid that automatically locates and seals minor leaks of up to approx. 3 mm – without any demolition or dismantling work. Whether it involves a leak in a pipe, fitting, pool liner, or tiled wall, this smart liquid actively searches for the leak and cures there within 48 hours.
User-friendly and efficient, it is suitable for both indoor and outdoor pools and even for spas. Add it to the water, let it circulate, and leave the rest to the sealer. You'll be back to enjoying a leak-free pool in no time.
⚙️ Instructions for use
PreparationEnsure the water is clean and all filters have been cleaned. Remove active carbon or UV systems if present.
Dosage
For spas: Add 1 ml of Leak Sealer per 60 liters of water.
For pools: Pour the contents directly into the water, preferably via the skimmer or near the suspected leak.
CirculationLet the system circulate for 24 hours without a heat pump. Is a heat pump connected? Then temporarily close the bypass to prevent damage.
CuringAfterwards, let the water rest for at least 48 hours so the sealer can cure. Avoid using the pool during this period.
⚠️ Important warnings
Only use when water temperatures are above 6 °C
Do not mix with other chemicals
Keep out of reach of children
Wear protective equipment when dosing
With Rijo Leak Sealer, you can resolve minor leaks in your pool or spa quickly, safely, and easily – without having to dig, drill, or expose pipes. Add it, let it circulate, and enjoy your pool worry-free again.
14 in stock
Ordered before 10:00 PM, shipped today
The Rijo Acrylic Cleaner - 500 ml is the ultimate solution for restoring your spa, bathtub, or shower enclosure to top condition. This high-quality cleaner is specially developed for acrylic surfaces and effortlessly removes minor damage such as scratches and stains. After use, the cleaner leaves behind a protective layer that prevents limescale and soap scum buildup, keeping your spa clean and radiant for longer. With its convenient formula and simple application, the Rijo Acrylic Cleaner is a must-have for anyone looking to get the best out of their spa experience.
Instructions for use:
Shake the bottle well before use.
Apply the Rijo Acrylic Cleaner undiluted with a sponge or dry cloth to a dry surface.
Work in circular motions for an even distribution.
Let the product dry for a few minutes.
Buff away the remaining cleaner with a dry cloth for a glossy finish.
The Rijo Acrylic Cleaner offers a perfect combination of cleaning and protection, ensuring you can enjoy a radiantly clean spa or bathroom time and time again.
20 in stock
Ordered before 10:00 PM, shipped today
Rijo pH Plus powder – 1 kg has been specially developed to efficiently and safely increase the pH level of swimming pool and spa water. A correct pH level is essential for a stable and healthy water environment. When the pH is too low (acidic water), disinfectants such as chlorine may be less effective, and corrosion, skin irritation, or cloudy water are more likely to occur.This powder dissolves quickly, is easy to dose, and is perfectly suited for both private swimming pools and whirlpools. Thanks to the high purity of the active ingredient, this product offers a fast and reliable correction of acidity.
15 in stock
Ordered before 10:00 PM, shipped today
Rijo Defence – 1 L is a liquid maintenance product for pool and spa water that helps prevent and control limescale, metal stains, and cloudy water. The product is designed to bind dissolved minerals and metals in the water, making them less likely to precipitate onto the pool walls, spa, pipes, heating, and filter system.
Thanks to its organic phosphonate components, Rijo Defence acts as a sequestering agent. This keeps substances such as calcium and dissolved metals better bound in the water rather than causing visible deposits and discoloration.
Protection against limescale
Hard pool water contains a relatively high amount of dissolved minerals, including calcium. Under certain conditions, calcium can precipitate and cause hard, white, or gray limescale deposits.
This buildup can become visible on, among other things:
Pool walls and floor
Waterline
Tiles
Spa surfaces
Pipes
Filters
Heating elements
Heat exchangers
Rijo Defence helps reduce the formation of such mineral deposits by keeping the minerals present in solution.
Helps prevent metal stains
In addition to limescale, dissolved metals can cause problems. Especially iron, copper, and manganese can oxidize under certain conditions and cause discoloration.
This can manifest as brown, reddish, green, blue, or dark stains and discoloration of the pool water.
Rijo Defence binds dissolved metal ions, thereby helping to prevent them from depositing on pool or spa surfaces.
Reduces risk of cloudy water
Minerals and metals can also contribute to turbidity. When dissolved components react or begin to precipitate, small suspended particles can form.
By stabilizing these substances, Rijo Defence helps reduce the risk of mineral-related cloudiness and supports the maintenance of clear pool or spa water.
Ideal for hard or mineral-rich fill water
Rijo Defence is particularly valuable when the fill water used contains relatively high levels of lime or metals.
For example, in situations where limescale or discoloration occurs quickly after filling, or when a water analysis shows the presence of iron, copper, or manganese.
The product can be used both preventively and as part of maintenance when there is an increased risk of deposits.
Supports the protection of pool equipment
Limescale does not remain visible only on the pool wall. Minerals can also deposit inside components of the technical installation.
Rijo Defence helps limit the risk of mineral deposits, thereby supporting the maintenance of pipes, filters, and heating components, among others.
The product does not, of course, replace proper water balance. pH, alkalinity, hardness, and disinfection levels must be checked regularly.
Extra protection for pool and spa
With Rijo Defence – 1 L, you add an extra layer of protection to your pool or spa water treatment. The liquid formula helps stabilize dissolved minerals and metals, thereby reducing the risk of limescale, metal stains, and cloudiness.
Especially with hard or mineral-rich fill water, Rijo Defence is a useful addition to regular pH control, filtration, and disinfection.
25 in stock
Ordered before 10:00 PM, shipped today
A leaking pool or spa? Don't panic! With W’eau Leak Sealer, you have a powerful and effective liquid at your fingertips that automatically detects and seals small leaks up to approx. 3 mm – without any demolition or dismantling. Whether it involves a leak in a pipe, fitting, liner, or tiled wall, this smart liquid actively searches for the leak and hardens there within 48 hours.
User-friendly and efficient, suitable for both indoor and outdoor pools and even spas. Add it to the water, let it circulate, and leave the rest to the sealer. This way, you will be back to enjoying a leak-free pool in no time.
⚙️ Instructions for use
PreparationEnsure the water is clean and all filters have been cleaned. Remove active carbon or UV systems if present.
Dosage
For spas: Add 1 ml of Leak Sealer per 60 liters of water.
For swimming pools: Pour the contents directly into the water, preferably via the skimmer or near the suspected leak.
CirculationAllow the system to circulate for 24 hours without the heat pump. Is a heat pump connected? Then temporarily close the bypass to prevent damage.
CuringAfterwards, let the water rest for at least 48 hours so the sealer can cure. Avoid using the pool during this period.
⚠️ Important warnings
Only use when water temperatures are above 6 °C
Do not mix with other chemicals
Keep out of reach of children
Wear protective gear when dosing
With W’eau Leak Sealer, you can resolve small leaks in your pool or spa quickly, safely, and easily – without having to dig, drill, or open up pipes. Add it, let it circulate, and enjoy your pool worry-free again.
13 in stock
Ordered before 10:00 PM, shipped today
With W'eau Metal Clean, you prevent deposits of iron, copper, and other minerals in your spa. Use W'eau Metal Clean with every spa water change to neutralize minerals and prevent staining. The product reacts with any metal contamination before it has a chance to form unsightly stains.
Instructions for use W'eau Metal Clean
Turn off the filter system
Add 250 ml of W'eau Metal Clean to the water (per tub) and distribute evenly
Turn on the filter system and let it run for at least 30 minutes
Safety instructions W'eau Metal Clean
Never add the product while people are in the spa. Always use gloves. Keep the product out of the reach of children and store it in a closed container in a well-ventilated area. Always read the safety instructions on the packaging.
Features W'eau Metal Clean
Liquid form
Content: 500 ml
Protect and care for your spa cover with Rijo Cover Shine spray. This high-quality maintenance spray makes your cover water-repellent, helps against discoloration due to UV radiation, and prevents dirt from adhering quickly. This extends the lifespan of your spa cover and keeps it looking like new – with a beautiful, fresh shine.
🧾 Instructions for use
Spray the Rijo Cover Shine spray evenly onto a dry spa cover.
Use a dry, lint-free cloth to distribute the product.
Make circular motions until the cover begins to shine nicely.
Use regularly for lasting results.
⚠️ Safety instructions
Keep out of reach of children.
Use only in a well-ventilated area.
Store the bottle closed and in a cool, dry place.
Consult the label for additional safety information.
16 in stock
Ordered before 10:00 PM, shipped today
The Rijo TA- Alkalinity 3 kg is an essential product for maintaining the chemical balance of your pool water. This product helps to lower the total alkalinity (TA) of the water, which is important for keeping the pH level stable. A stable pH level ensures that your pool water is less sensitive to external factors such as weather changes and the use of chemicals. This extends the lifespan of your pool and makes it more pleasant to swim in.
With this 3 kg package, you can easily adjust the alkalinity by adding the powder to water in a bucket and then distributing it evenly throughout the pool. The product dissolves quickly and ensures that the pH level remains stable for longer.The Rijo TA- Alkalinity 3 kg is a reliable choice for anyone who wants to keep swimming water healthy and clear by maintaining the alkalinity level.
The AquaFinesse Di-Chlor kit is the ultimate all-in-one solution for your spa water treatment. With this kit, you no longer need any other chemicals: the combination of AquaFinesse liquid and Di-Chlor granules removes bacteria, prevents limescale and unpleasant odors, and ensures wonderfully soft and clean water.
A major advantage of AquaFinesse is its convenience: you only need to add the product to your spa once a week. The granules are used before and after bathing, or once a week if the spa is not being used. The result: crystal-clear, fresh, and safe water – without any hassle involving pH correctors, flocculants, or other chemicals.
With one kit, you can perfectly maintain your spa for 3 to 6 months.
Kit contents
2 bottles of AquaFinesse liquid
Di-Chlor granules
Measuring cup
Dispenser
Instructions for use (brief)
Add the recommended amount of AquaFinesse liquid once a week.
Add one level scoop of Di-Chlor granules before and after using the spa.
When not in use: add one level scoop of granules per week.
Open all valves and jets and let the pump run for approximately 1 minute.
Rinse the filters regularly.
With Rijo Anti-Limescale – 5 Litres, you can keep your swimming pool clean, clear, and free from stubborn limescale deposits and rust stains. This powerful liquid maintenance product has been specially developed to prevent limescale deposits and effectively remove existing buildup. This ensures that the pool walls, waterline, and technical installations remain in excellent condition for longer.
Limescale buildup occurs when pool water has a high calcium content or when the water balance is not optimal. This can result in white or grey deposits on the pool walls, at the waterline, on steps, the skimmer, or other pool components. Additionally, metal particles in the water can cause brown or orange rust stains. Rijo Anti-Limescale effectively tackles these problems and simultaneously helps to prevent new deposits.
Thanks to its powerful liquid formula, the product mixes quickly with the pool water and works directly on limescale and metal deposits. With regular use, the pool stays clean, pipes and technical parts are protected, and the pool maintains its fresh appearance.
Rijo Anti-Limescale is suitable for both preventative maintenance and treating existing limescale. The product is easy to dose and safe to use in almost all types of swimming pools, including above-ground pools, in-ground pools, and saltwater pools. By maintaining good water quality, you also extend the service life of your filter system, heat pump, and other pool equipment.
With the generous 5-litre packaging, you have enough product for multiple treatments throughout the swimming season. This keeps your pool water clear and ensures you and your family can enjoy a clean and well-maintained swimming pool.
20 in stock
Ordered before 10:00 PM, shipped today
Rijo Citra Clean Spray is the ultimate solution for cleaning all plastic surfaces of your spa or swimming pool. This powerful all-purpose cleaner uses the natural cleaning power of citrus and easily removes stubborn dirt. Whether you want to clean the cabinet, shell, or controls of your spa, W’eau Citra Clean ensures a streak-free result and leaves behind a fresh citrus scent. Thanks to the convenient spray bottle, the product is easy to use and ideal for quick clean-ups.
Instructions for W’eau Citra Clean spray:
Spray Rijo Citra Clean directly onto the surface to be cleaned.
Distribute the product evenly with a damp cloth.
Rinse the treated surface with water to completely remove the dirt.
Allow it to dry for a streak-free and clean result.
Safety instructions for Rijo Citra Clean spray:
Wear protective gloves during use.
Keep out of reach of children.
Store the product in its original, tightly closed packaging in a well-ventilated area.
Always read the safety instructions on the packaging.
With Rijo Citra Clean Spray, you can enjoy a clean and fresh swimming pool or spa without the hassle, all powered by the natural strength of citrus!
The W’eau Calcium Booster is a high-quality liquid solution specially developed to increase the calcium hardness of spa and jacuzzi water. Proper water balance is crucial for maintaining the quality of your spa system. Calcium plays a key role here: a calcium hardness that is too low can lead to corrosion of metal parts, damage to the acrylic surface, and problems with pumps, heating elements, and pipes.
By bringing the water to the correct hardness – ideally between 150 and 400 ppm – you not only protect the technical components of your spa, but also ensure a more pleasant spa experience, less maintenance, and a longer lifespan for your system.
The W’eau Calcium Booster is easy to use, works quickly, and is suitable for all types of spas, hot tubs, and whirlpools.
⚙️ Application & use
The product is added directly to the circulating spa water. For optimal performance, follow the steps below:
Turn on the jets or circulation pump for proper distribution.
Add the required amount of W’eau Calcium Booster.
15 ml increases calcium hardness by 7.4 ppm per 1000 liters of water.
Let the filter system run for 1 to 2 hours.
Then measure the calcium hardness again.
Repeat if necessary until the desired level is reached.
The recommended calcium level is between 150 and 400 ppm. This depends on the water source and the specifications of your spa system.
⚠️ Safety instructions
Always wear protective gloves when using.
Keep out of reach of children.
Store the product in a well-ventilated area, upright and closed.
Always consult the label and safety instructions on the packaging before use.
42 in stock
Ordered before 10:00 PM, shipped today
The W’eau Citra Clean Spray is the ultimate solution for cleaning all plastic surfaces of your spa or swimming pool. This powerful all-purpose cleaner uses the natural cleaning power of citrus and easily removes stubborn dirt. Whether you want to clean the surround, shell, or buttons of your spa, W’eau Citra Clean ensures a streak-free result and leaves behind a fresh citrus scent. Thanks to the convenient spray bottle, the product is easy to use and ideal for quick cleaning jobs.
Instructions for use W’eau Citra Clean spray:
Spray W’eau Citra Clean directly onto the surface to be cleaned.
Distribute the product evenly with a damp cloth.
Rinse the treated surface with water to completely remove the dirt.
Allow to dry for a streak-free and clean result.
Safety instructions W’eau Citra Clean spray:
Wear protective gloves during use.
Keep out of reach of children.
Store the product in its original, well-sealed packaging in a well-ventilated area.
Always read the safety instructions on the packaging.
With the W’eau Citra Clean Spray, you can enjoy a clean and fresh swimming pool or spa without the hassle, all using the natural power of citrus!
36 in stock
Ordered before 10:00 PM, shipped today
Rijo Anti-Limescale 1 Liter is a powerful liquid limescale stabilizer specifically developed to prevent limescale buildup in swimming pools. Hard water contains high levels of calcium and minerals that can deposit on pool walls, floors, pipes, and technical installations. This can lead to white deposits, a dull appearance of the pool, and reduced efficiency of the filtration system and heat pump.
With Rijo Anti-Limescale, you keep limescale particles in solution, preventing them from settling. This keeps your pool cleaner for longer and protects pipes, filters, and heat exchangers against limescale deposits. Anti-limescale products also help prevent blockages and loss of efficiency in pool equipment.
Protect your pool and equipment
Limescale is not only visible on pool walls but can also accumulate in pipes, sand filters, heat pumps, and other components of the pool system. By adding Rijo Anti-Limescale preventatively, the system continues to function optimally and you extend the lifespan of your equipment.
Benefits of regular use:
Prevents limescale on pool walls and floors
Protects pipes and filter systems
Prevents deposits in the heat pump's heat exchanger
Keeps pool water clear
Reduces the adhesion of dirt and minerals
Extends the lifespan of pool equipment
Suitable for all types of pools
Rijo Anti-Limescale is suitable for almost every type of pool and can be safely used in combination with various water treatment systems.
Suitable for:
Above-ground pools
In-ground pools
Chlorine pools
Saltwater pools
Polyester pools
Foil and liner pools
Spas and hot tubs
Easy to use
The liquid formula mixes quickly with pool water. Add the recommended amount while the filtration system is running so that the product disperses evenly through the water. For the best results, use Rijo Anti-Limescale immediately after filling the pool and then periodically, depending on the water hardness.
The Rijo TAC- (Alkalinity Reducer) 5 kg has been specially developed to lower the total alkalinity (TA) of your swimming pool water. Proper alkalinity (100–150 ppm) is essential for stable pH levels. By using TA-, you prevent the pH level from fluctuating due to external factors such as rain or chemical overdosing. This results in healthier, clearer, and easier-to-maintain swimming water.
Why is this important?
A stable pH prevents corrosion, limescale, and skin and eye irritation.
Less use of corrective agents = lower maintenance costs.
