Prepare your pool system for winter with this drain valve set for 50 mm PVC pipes. The drain valve allows you to drain any water remaining in the connected pipe section. This helps reduce the risk of frost damage when the system is out of use.
The set is intended, among other uses, for draining pipes in your pool's solar heating system. The lever makes it easy to open and close the valve.
Helps prevent frost damage
Water remaining in a pipe can expand when it freezes, causing damage to pipes or fittings. Draining the system before a frost period reduces this risk.
The drain valve makes it easier to drain the system, but does not automatically ensure that the entire system is free of water. Water may remain in bends, low pipe sections, or connected equipment. Therefore, also follow the winterization instructions for the other components.
Easy lever operation
Use the lever to operate the valve when draining and restarting the system. Install the drain valve in an easily accessible location where the water can drain away in a controlled manner.
For proper operation, the pipe section to be drained must be able to drain towards the drain point. The placement of the valve is therefore important for the result.
For 50 mm PVC pipes
This set is intended for use with 50 mm PVC pool pipes. It allows you to incorporate a drain point into the piping, for example in a solar heating system.
Before installation, check which fittings are required. The exact contents of the set and the type of connection fitting are not specified in the provided information.
With the AstralPool type D control box, you can control the daily switching times of the pool pump and power suitable underwater lighting from a single enclosure. This version combines an adjustable motor protection device of 6 to 10 amperes with a 24-hour programmable timer and a built-in 630 W transformer with an output voltage of 12 V.
The control box has three operating modes: Auto, 0 and Manual. This allows you to operate the pump automatically according to a program, switch off the operation, or choose manual operation. The protected output also offers connection options for two suitable underwater lights.
Automatic filtration with a 24-hour timer
With the programmable timer, you set the daily operating times of the pool pump. In automatic mode, the pump follows the set program. This ensures that filtration takes place at fixed times without having to switch the pump on and off yourself each time.
If you want to temporarily deviate from the program, use the manual mode. The zero mode switches off the operation. A separate timer program for the lighting is not mentioned in the product information.
Motor protection for pumps from 6 to 10 A
Type D has the highest setting range within the shown overview of types A through D. The motor protection device is adjustable from 6 to 10 A and must be matched to the rated current of the connected pump motor.
According to the provided data, type D is suitable for a pump power of 1.5 HP at single-phase 230 V and 2 to 3 HP at three-phase 230 V. For the specified 400 V connection, 4 HP is listed. Always check the motor current on the nameplate and the official wiring diagram. The power in HP alone is insufficient to select the correct control box.
Comparison of AstralPool types A through D
The versions differ in the setting range of the motor protection device. Choose the range that matches the pump and the electrical installation.
SKU in overview
Type
Motor protection setting range
Pump power 1-phase 230 V
Pump power 400 V*
Pump power 3-phase 230 V
74991
A
1.6–2.5 A
¼ HP
¾–1 HP
½ HP
74992
B
2.5–4 A
½ HP
1.5–2 HP
¾–1 HP
74993
C
4–6.3 A
¾–1 HP
3 HP
1.5 HP
74994
D
6–10 A
1.5 HP
4 HP
2–3 HP
Built-in transformer for underwater lighting
The built-in transformer provides 12 V and has a rated power of 630 W. The protected output is intended for two suitable underwater lights.
Match the total connected lamp power, cable length, and cable cross-section to the transformer and the installation regulations. Also check whether the lights are suitable for the type of output voltage. A suitable wattage alone does not confirm electrical compatibility.
Pump control and light power supply in one enclosure
The control box neatly combines the programmable timer, motor protection device, and lighting transformer. This makes the enclosure a central part of the technical pool installation.
Choose the installation location according to the installation regulations and keep the enclosure accessible for operation and maintenance. The protection class and dimensions are not specified and must be checked before installation.
With the AstralPool type B control box, you can set the daily operating times of the pool pump and access a power supply for suitable underwater lighting. The enclosure combines an adjustable motor protection device with a range of 2.5 to 4 amps, a 24-hour programmable clock, and a built-in 630 W transformer with an output voltage of 12 V.
With the Auto, 0, and Manual settings, you can easily choose between automatic operation, switching off, and manual operation. The control box is also equipped with a protected output for two underwater lights. This keeps the pump control and lighting power supply conveniently together.
Automatic filtration at set times
The 24-hour programmable clock allows you to set the daily operating times of the pool pump. In automatic mode, the pump follows this program. This allows you to coordinate filtration times with the use and needs of the pool.
Use the manual setting for temporary deviations. The zero setting switches off the operation. A separate lighting schedule is not mentioned in the product information.
Motor protection from 2.5 to 4 amps
The type B version is intended for a suitable pump motor with a rated current within the adjustable range of 2.5 to 4 A. The motor protection must be set according to the specifications of the connected pump.
According to the provided overview, type B is suitable for a pump power of ½ HP at 1-phase 230 V and ¾ to 1 HP at 3-phase 230 V. For the specified 400 V connection, 1.5 to 2 HP is listed. Always check the motor current and connection method using the nameplate and the official wiring diagram.
Comparison of AstralPool types A through D
Type B has a higher adjustable range than type A and a lower range than types C and D. Choose the version that matches the rated motor current of the pump.
SKU in overview
Type
Motor protection adjustable range
Pump power 1-phase 230 V
Pump power 400 V*
Pump power 3-phase 230 V
74991
A
1.6–2.5 A
¼ HP
¾–1 HP
½ HP
74992
B
2.5–4 A
½ HP
1.5–2 HP
¾–1 HP
74993
C
4–6.3 A
¾–1 HP
3 HP
1.5 HP
74994
D
6–10 A
1.5 HP
4 HP
2–3 HP
Built-in transformer for underwater lights
The transformer provides 12 V and has a rated power of 630 W. The protected output is intended for two suitable underwater lights.
Coordinate the total lamp power and wiring with the transformer. Also check that the electrical characteristics of the lights match the output. The type B version has the same rated transformer capacity as the previously described types A and C.
Central control in the technical room
The combination of motor protection, clock, and transformer makes this control box a practical component of the pool installation. The most important pump control functions are available in one place.
Install the enclosure according to the installation instructions and leave sufficient space for connection, operation, and maintenance. Check the protection class before determining the installation location.
With the AstralPool control box type A, you control the daily switching times of the pool pump and power suitable underwater lighting from a single enclosure. This version combines an adjustable motor protection from 1.6 to 2.5 amperes with a 24-hour programmable clock and a built-in 630 W transformer with an output voltage of 12 V.
The control box features three operating modes: Auto, 0 and Manual. In addition, there is a protected output for two underwater lights. This allows you to neatly combine the pump control and light power supply in the technical installation of your pool.
Automatic filtration with a 24-hour clock
With the programmable clock, you set the times when the pool pump should operate. In automatic mode, the pump follows the set daily program. This allows filtration to take place at fixed times.
If you want to temporarily deviate from the program, use the manual mode. The zero setting switches off the operation. A separate programming function for the underwater lighting is not listed.
Motor protection for a lower current range
Type A has an adjustable motor protection from 1.6 to 2.5 A. This version is therefore intended for pump motors whose rated current falls within this range. The protection must be set to the connected motor.
According to the provided data, type A is suitable for a pump power of ¼ HP at 1-phase 230 V, ¾ to 1 HP at 3-phase 400 V, or ½ HP at 3-phase 230 V. Always check the motor current on the nameplate and the official wiring diagram. The power in HP alone does not determine whether the combination is suitable.
Comparison with types B, C and D
The main difference between the versions is the adjustment range of the motor protection. Type A has the lowest range; versions B, C and D are intended for higher motor currents.
Type
Motor protection adjustment range
Pump power 1-phase 230 V
Pump power 400 V*
Pump power 3-phase 230 V
A
1.6–2.5 A
¼ HP
¾–1 HP
½ HP
B
2.5–4 A
½ HP
1.5–2 HP
¾–1 HP
C
4–6.3 A
¾–1 HP
3 HP
1.5 HP
D
6–10 A
1.5 HP
4 HP
2–3 HP
Built-in transformer for two underwater lights
The control box is equipped with a 630 W transformer with an output voltage of 12 V. Two suitable underwater lights can be connected via the protected output.
Match the lights, the total connected power, and the cabling to the transformer. The transformer capacity is independent of the adjustment range of the motor protection: type A therefore has the same specified lighting power supply as the previously described type C.
Organized control in a single enclosure
By bringing together the programmable clock, motor protection, and transformer, the control box provides a central control point for the connected pump and a power supply for the pool lighting. Choose a suitable mounting location according to the installation instructions and keep the enclosure accessible for operation and maintenance.
BUY 4 AND GET 1 FREEHeat your pool with the warmth of the sun using the OKU 2000 Max-Absorber solar collector. This solar collector has an absorption surface of 2 m² and directly transfers solar heat to the pool water flowing through it. This supports pool heating without fuel or an electric heating element.
The collector is connected to the pool's water circulation system. The pump circulates the water through the black plastic absorber, after which the heated water flows back into the pool. The heat output depends on the amount of sunlight, the placement, the outside temperature, and the number of connected collectors.
Pool heating with solar energy
The black absorption surface absorbs solar heat and transfers it to the water flowing past it. According to the provided product information, the efficiency can reach approximately 85% under favorable conditions.
The sun provides the heat, but a pump is still required for water circulation. Whether the existing filter pump has sufficient capacity depends on factors such as the pipe length, the height difference, and the arrangement of the collectors. Longer pump run times may cause additional electricity consumption.
Expandable to the size of your pool
The modular system makes it possible to combine multiple collectors. This allows you to match the total absorption surface to the size of the pool and the desired heating support.
As a guideline, an absorption surface of 50 to 80% of the water surface is recommended. For an 8 x 4 meter pool, this means 16 to 25.6 m² of absorption surface, or approximately 8 to 13 collectors of 2 m². The correct sizing also depends on the location, the use of a pool cover, and the desired water temperature.
Open connections of your choice
The OKU 2000 Max-Absorber has four connection points that are closed upon delivery. During installation, you only open the connections required for your setup, according to the installation instructions. Unused connection points remain closed, so no separate sealing caps are required.
The collector offers connection options for 25 and 38 mm. The corresponding hose sets are available separately. Before opening the connection points, check which pipe layout and connection size you will use.
Various placement options
The collectors can be placed on a suitable surface, a roof, or a support structure. According to the product information, a slanted or vertical arrangement is also possible.
Choose a location with sufficient sunlight and as little shade as possible. The orientation and tilt angle affect the heat output. Coordinate the mounting, support, and pipe layout with the installation instructions, and take into account the weight of the water-filled installation.
Plastic suitable for use with pool water
The absorber is made from a single piece of plastic and is produced in Germany according to the product information. The material is intended for use with chlorinated and salt-containing pool water, within the manufacturer's permitted water parameters.
The stated temperature resistance of the material is −50 to +115 °C. Always follow the installation instructions for winterizing and, if necessary, draining the installation. Resistance to low temperatures does not automatically mean that a complete, water-filled installation can survive winter without measures.
Can be combined with a solar control system
With a suitable differential temperature control system, you can automate the heat utilization. This compares the temperature of the collector with that of the pool water and, depending on the installation, activates a pump or valve when heating is beneficial.
This helps prevent water from flowing through a colder collector and thereby losing heat. A pool cover is a useful addition to retain the accumulated heat for longer.
The Elegance plug seals a suitable vacuum connection when it is not in use. This allows you to neatly finish the connection point in the pool wall between cleaning sessions.
The sand color combines beautifully with light pool liners and other sand-colored built-in components. The plug is intended as a sealing component for a matching vacuum connection. Before ordering, check whether this version is suitable for your connection.
Neat finish of the connection point
A fixed vacuum connection is convenient for connecting a pool vacuum. When the vacuum hose has been removed, you can seal the connection point with this plug. For the next cleaning session, remove the plug again according to the instructions for use of the connection.
Check the fit
The correct fit is important for a proper seal. Therefore, check the type and size of the vacuum connection. The name Elegance alone does not confirm that the plug fits every version.
The Elegance plug seals off a suitable pool vacuum connection when it is not in use. This allows you to neatly finish the connection point in the pool wall between cleaning sessions.
The grey color combines nicely with dark pool liners and other grey built-in components. The plug is intended as a sealing component for a matching pool vacuum connection. Before ordering, check whether this version is suitable for your connection.
Neat finish of the connection point
A fixed pool vacuum connection is convenient for connecting a pool vacuum. When the vacuum hose has been removed, you can seal off the connection point with this plug. For the next cleaning session, remove the plug again according to the connection's instructions for use.
Check the fit
The correct fit is important for a proper seal. Therefore, check the type and size of the pool vacuum connection. The name Elegance alone does not confirm that the plug fits every version.
With the Elegance stop, you can seal off a suitable vacuum connection when it is not in use. This allows you to neatly finish the connection point in the pool wall between cleaning sessions.
Neat finish for the connection point
A fixed vacuum connection is useful for connecting a pool vacuum. When the vacuum hose has been removed, you can seal off the connection point with this stop. For the next cleaning session, remove the stop again according to the connection's instructions for use.
Check the fit
The correct fit is important for a proper seal. Therefore, check the type and size of the vacuum connection. The name Elegance alone does not confirm that the stop fits every model.
The Hayward floor drain helps drain water from the deepest point of your pool to the filtration system. By also incorporating water from the lower water layers into the circulation, the floor drain supports a more even distribution of heat and water treatment chemicals.
This version is suitable for underground pools with a concrete or liner construction. The housing is made of ABS and has an anthracite-colored finish. With a specified flow rate range of 5 to 15 m³/h, the floor drain can be incorporated into a correspondingly designed pool system.
Supports circulation from the floor
Good water circulation involves both the surface water and the deeper water layers in the filtration. The floor drain drains water from underneath the pool, after which it returns via the system and the return inlets.
This helps to limit temperature differences between the lower and upper water layers and supports the distribution of water treatment chemicals. The final performance depends on the cooperation between the floor drain, skimmers, return inlets, and pool pump.
Suitable for concrete and liner pools
The floor drain is built into the deepest point of the pool during construction. This version is suitable for concrete and liner constructions. A correct connection and sealing are important, because the drain is less easily accessible after the pool floor has been finished.
Therefore, take the position and the pipe route into account in the pool design beforehand. Check which installation and sealing components are required for your pool floor construction.
Also usable for draining
In addition to the daily circulation, the floor drain can be used to drain pool water when emptying the pool. For this, the pipework must be properly configured.
The floor drain forms the suction point; the actual draining of the water is managed via the connected system. The possibilities depend on the pump, valves, and drainage route.
ABS housing with two connection positions
The floor drain is made of ABS and has an anthracite color that blends nicely with dark or gray pool liners. The side outlet has a 2″ female thread connection. On the underside, there is a 1½″ female thread connection.
These connection positions offer options for the pipe installation. When connecting and optionally sealing off an unused connection, follow the manufacturer's installation instructions. The safe execution of the suction must also be coordinated with the entire pool system.
The Hayward floor drain helps drain water from the deepest point of your pool to the filtration system. By also circulating water from the lower layers, the floor drain supports a more even distribution of heat and water treatment chemicals.
This version is suitable for underground pools with a concrete or liner construction. The housing is made of ABS and has an anthracite finish. With a specified flow rate range of 5 to 15 m³/h, the floor drain can be incorporated into a suitably designed pool system.
Supports circulation from the pool floor
Good water circulation involves both the surface water and the deeper layers of water in the filtration process. The floor drain draws water from underneath the pool, after which it returns through the system and the return inlets.
This helps reduce temperature differences between the lower and upper layers of water and supports the distribution of water treatment chemicals. The final performance depends on the interaction between the floor drain, skimmers, return inlets, and pool pump.
Suitable for concrete and liner pools
The floor drain is installed at the deepest point of the pool during construction. This version is suitable for concrete and liner constructions. Proper connection and sealing are important, as the drain is less easily accessible after the pool floor has been finished.
Therefore, take the position and pipe route into account when designing the pool. Check which installation and sealing components are required for your pool floor construction.
Also suitable for draining the pool
In addition to daily circulation, the floor drain can be used to drain pool water when emptying the pool. For this purpose, the piping system must be appropriately configured.
The floor drain serves as the suction point; the actual draining of the water is controlled via the connected system. The possibilities depend on the pump, valves, and drainage route.
ABS housing with two connection positions
The floor drain is made of ABS and has an anthracite color that blends well with dark or gray pool liners. The side outlet has a 2″ female thread connection. On the underside, there is a 1½″ female thread connection.
These connection positions offer flexibility for pipe installation. When connecting and, if necessary, sealing off an unused connection, follow the manufacturer's installation instructions. The safe operation of the suction must also be coordinated with the entire pool system.
The Hayward floor drain helps drain water from the deepest point of your pool to the filtration system. By also incorporating water from the lower water layers into the circulation, the floor drain supports a more even distribution of heat and water treatment chemicals.
This version is suitable for underground pools with a concrete or liner construction. The housing is made of ABS and has an anthracite-colored finish. With a specified flow rate range of 5 to 15 m³/h, the floor drain can be incorporated into a correspondingly designed pool system.
Supports circulation from the floor
Good water circulation involves both the surface water and the deeper water layers in the filtration. The floor drain drains water from underneath the pool, after which it returns via the system and the return jets.
This helps to reduce temperature differences between the lower and upper water layers and supports the distribution of water treatment chemicals. The final performance depends on the cooperation between the floor drain, skimmers, return jets, and pool pump.
Suitable for concrete and liner pools
The floor drain is built into the deepest point of the pool during construction. This version is suitable for concrete and liner constructions. A correct connection and sealing are important, because the drain is less easily accessible after the pool floor has been finished.
Therefore, take the position and the pipe route into account in the pool design beforehand. Check which installation and sealing components are required for your floor construction.
Also usable for draining
In addition to the daily circulation, the floor drain can be used to drain pool water when emptying the pool. For this, the pipework must be appropriately designed.
The floor drain forms the suction point; the actual draining of the water is controlled via the connected system. The possibilities depend on the pump, valves, and drainage route.
ABS housing with two connection positions
The floor drain is made of ABS and has an anthracite color that blends nicely with dark or gray pool liners. The side outlet has a 2″ female thread connection. On the underside, there is a 1½″ female thread connection.
These connection positions offer options for the pipe installation. When connecting and optionally sealing off an unused connection, follow the manufacturer's installation instructions. The safe execution of the suction must also be coordinated with the entire pool system.
Directly return filtered water to your pool with the Hayward adjustable return jet. This jet is suitable for underground pools with concrete or liner walls and helps align the water circulation with the pool's layout. Thanks to the adjustable flow direction, you can determine where the returned water flows.
The jet is made of ABS and comes in anthracite grey. This color matches well with grey and dark pool liners. With a specified flow rate range of 5 to 6 m³/h, the jet is a practical component of a well-balanced pool system.
Adjustable flow for good water distribution
Good water circulation helps distribute filtered water throughout the pool. With this adjustable jet, you can adapt the flow direction to the position of the skimmers and the shape of the pool. This helps support the flow and reduce areas with little water movement.
The result depends on the entire system. The placement and number of jets, the pump capacity, and the drain points together determine how the water moves through the pool.
Suitable for concrete and liner pools
This Hayward jet is designed for installation in underground pools with concrete or liner walls. Consider the position of the jets in the pool design so that the return pipes can be installed in the correct locations.
Correct installation and sealing are important for a watertight connection to the pool wall. Check which wall fitting and installation components are required for your wall construction and follow the manufacturer's installation instructions.
Grey ABS
The housing is made of ABS and has a white finish.
The adjustable outlet allows you to adjust the water flow after installation. This is useful when balancing the pool system.
Connections and flow rate
The jet has a 2″ female thread connection and a 50 mm internal diameter. Check beforehand which connection and fittings are suitable for your pool's return pipe.
The specified flow rate range is 5 to 6 m³/h. Coordinate the number of jets and the water distribution with the system's capacity. The actual flow per jet depends on several factors, including the pump, pipe resistance, and distribution across the return pipes.
Directly return filtered water to your pool with the Hayward adjustable return jet. This return jet is suitable for underground pools with concrete or liner walls and helps align the water circulation with the pool's layout. Thanks to the adjustable flow direction, you can determine where the returned water flows.
The return jet is made of ABS and comes in anthracite grey. This color matches well with grey and dark pool liners. With a specified flow rate range of 5 to 6 m³/h, the return jet forms a practical part of a well-balanced pool system.
Adjustable flow for good water distribution
Good water circulation helps distribute filtered water throughout the pool. With this adjustable return jet, you can adapt the flow direction to the position of the skimmers and the shape of the pool. This allows you to support the flow and help reduce areas with little water movement.
The result depends on the entire system. The placement and number of return jets, the pump capacity, and the drain points together determine how the water moves through the pool.
Suitable for concrete and liner pools
This Hayward return jet is intended for installation in underground pools with concrete or liner walls. Take the position of the return jets into account in the pool design so that the return lines can be installed in the correct places.
Correct installation and sealing are important for a watertight connection to the pool wall. Check which wall fitting and installation components are required for your wall construction and follow the manufacturer's installation instructions.
ABS in a sand-colored version
The housing is made of ABS and has a white finish.
The adjustable outlet offers the possibility to adjust the water flow after installation. This is useful when balancing the pool system.
Connections and flow rate
The return jet has a 2″ female thread connection and 50 mm internally. Check beforehand which connection and fittings fit the return line of your pool.
The specified flow rate range is 5 to 6 m³/h. Coordinate the number of return jets and the distribution of the water with the capacity of the system. The actual flow per return jet depends on several factors, including the pump, pipe resistance, and distribution across the return lines.
Directly return filtered water to your pool with the Hayward adjustable return jet. This return jet is suitable for in-ground pools with concrete or liner walls and helps align the water circulation with the pool's layout. Thanks to the adjustable flow direction, you can determine where the returned water flows.
The return jet is made of ABS and comes in anthracite grey. This colour complements grey and dark pool liners. With a specified flow rate range of 5 to 6 m³/h, the return jet is a practical component of a well-balanced pool system.
Adjustable flow for even water distribution
Good water circulation helps distribute filtered water throughout the pool. With this adjustable return jet, you can adapt the flow direction to the position of the skimmers and the shape of the pool. This helps support the flow and reduce areas with little water movement.
The result depends on the entire system. The placement and number of return jets, the pump capacity, and the drain points together determine how the water moves through the pool.
Suitable for concrete and liner pools
This Hayward return jet is designed for installation in in-ground pools with concrete or liner walls. Include the position of the return jets in the pool design so that the return pipes can be installed in the correct locations.
Correct installation and sealing are important for a watertight connection to the pool wall. Check which wall sleeve and installation components are required for your wall construction and follow the manufacturer's installation instructions.
ABS in white
The housing is made of ABS and has a white finish.
The adjustable outlet allows you to adjust the water flow after installation. This is useful when fine-tuning the pool system.
Connections and flow rate
The return jet has a 2″ female thread connection and a 50 mm internal diameter. Check beforehand which connection and fittings are suitable for your pool's return pipe.
The specified flow rate range is 5 to 6 m³/h. Coordinate the number of return jets and the water distribution with the system's capacity. The actual flow rate per return jet depends on several factors, including the pump, pipe resistance, and distribution across the return pipes.
Keep your pool surface clean with the Hayward wide-mouth skimmer. This skimmer draws surface water with floating debris into the filtration system, making it an important part of the water circulation. This model is suitable for underground pools with concrete or liner walls and has an anthracite grey color.
The wide opening allows surface water to flow into the skimmer over a broad area. This removes debris such as leaves and insects before they sink to the bottom. With a specified flow rate range of 6 to 10 m³/h, you can match the skimmer to the capacity and configuration of your pool system.
Wide mouth for removing surface debris
A lot of debris enters the pool via the water surface. The skimmer helps collect this debris by drawing the top layer of water toward the filtration system. This supports daily pool maintenance and helps keep the surface clean.
Its operation depends on the placement of the skimmer, the water level, and the water circulation. Proper coordination with the return jets and pool pump is therefore important. This model is intended for a standard water level.
Suitable for concrete and liner pools
This Hayward skimmer is designed for installation in underground pools with concrete or liner walls. This model has a 311 mm extension. When preparing the wall, take into account the installation space, pipe connections, and accessibility for maintenance.
For a liner pool, a proper seal at the wall penetration is important. During installation, use the components and procedures specified for this model.
ABS housing in Sand color
The skimmer is made of ABS and intended for use in a pool environment. Hayward is known for its pool products, where durability and quality are central.
Connections and overflow
The skimmer has an outlet connection with the specified connection dimensions of 2″ female thread and 63 mm internal diameter. In addition, a 32 mm overflow connection is provided. When correctly connected to a drain, excess water can be discharged via the overflow.
When assembling the system, check which pipes and fittings are required. The number of skimmers needed depends on factors including pool size, the desired flow rate, and the distribution of the water flow.
Keep your pool surface clean with the Hayward wide-mouth skimmer. This skimmer draws surface water with floating debris into the filtration system, making it an important part of the water circulation. This model is suitable for underground pools with concrete or liner walls and has an anthracite grey color.
The wide opening allows surface water to flow into the skimmer over a broad area. This removes debris such as leaves and insects before they sink to the bottom. With a specified flow rate range of 6 to 10 m³/h, you can match the skimmer to the capacity and configuration of your pool system.
Wide mouth for removing surface debris
A lot of debris enters the pool via the water surface. The skimmer helps collect this debris by drawing the top layer of water toward the filtration system. This supports daily pool maintenance and helps keep the surface clean.
Its operation depends on the placement of the skimmer, the water level, and the water circulation. Proper coordination with the return jets and pool pump is therefore important. This model is intended for a standard water level.
Suitable for concrete and liner pools
This Hayward skimmer is designed for installation in underground pools with concrete or liner walls. This model has a 311 mm extension. When preparing the wall, take into account the installation space, pipe connections, and accessibility for maintenance.
For a liner pool, a proper seal at the wall penetration is important. During installation, use the components and procedures specified for this model.
Light grey ABS housing
The skimmer is made of ABS and is intended for use in a pool environment. Hayward is known for its pool products, where durability and quality are central.
Connections and overflow
The skimmer has an outlet connection with the specified connection dimensions of 2″ female thread and 63 mm internal diameter. In addition, a 32 mm overflow connection is provided. When correctly connected to a drain, excess water can be discharged via the overflow.
When assembling the system, check which pipes and fittings are required. The number of skimmers needed depends on factors such as pool size, the desired flow rate, and the distribution of the water flow.
Keep your pool surface clean with the Hayward wide-mouth skimmer. This skimmer draws surface water with floating debris into the filtration system, making it an important part of the water circulation. This model is suitable for underground pools with concrete or liner walls and has an anthracite grey color.
The wide opening allows surface water to flow into the skimmer over a broad area. This removes debris such as leaves and insects before they sink to the bottom. With a specified flow rate range of 6 to 10 m³/h, you can match the skimmer to the capacity and configuration of your pool system.
Wide mouth for removing surface debris
A lot of debris enters the pool via the water surface. The skimmer helps collect this debris by drawing the top layer of water toward the filtration system. This supports daily pool maintenance and helps keep the surface clean.
Its operation depends on the placement of the skimmer, the water level, and the water circulation. Proper coordination with the return jets and pool pump is therefore important. This model is intended for a standard water level.
Suitable for concrete and liner pools
This Hayward skimmer is designed for installation in underground pools with concrete or liner walls. This model has a 311 mm extension. When preparing the wall, take into account the installation space, pipe connections, and accessibility for maintenance.
For a liner pool, a proper seal at the wall penetration is important. During installation, use the components and procedures specified for this model.
White ABS housing
The skimmer is made of ABS and intended for use in a pool environment. Hayward is known for its pool products, where durability and quality are central.
Connections and overflow
The skimmer has an outlet connection with the specified connection dimensions of 2″ female thread and 63 mm internal diameter. In addition, a 32 mm overflow connection is provided. When correctly connected to a drain, excess water can be discharged through the overflow.
When assembling the system, check which pipes and fittings are required. The number of skimmers needed depends on factors such as pool size, the desired flow rate, and the distribution of water flow.
With the High Density XXL polystyrene pool block, you can quickly and clearly build the walls of your pool. Thanks to the generous size of 125 x 25 x 50 cm, each block covers a large wall area. The height of 50 cm means that you can achieve a wall height of 1.50 meters with just three layers.
The blocks combine the low weight and insulating properties of polystyrene with a construction system that is filled with reinforced concrete. This creates a sturdy pool wall with a permanent, insulating formwork. A practical choice for DIY builders and pool builders who want to efficiently build larger wall areas.
Large size for quick wall construction
The XXL version has a length of 125 cm, a width of 25 cm, and a height of 50 cm. Each block therefore represents a wall area of 0.625 m². Due to these large dimensions, fewer blocks and layers are needed than with smaller versions.
For a wall height of 1.50 meters, you place three layers. This limits the number of individual placement steps. The larger size does require sufficient working space and careful alignment, so that the walls are built straight and to the correct dimensions.
Lightweight and insulating polystyrene
The blocks are made of expanded polystyrene, also known as EPS or Styrofoam. This material is light and therefore easy to move during construction. Despite the large size, the blocks remain easy to handle before they are filled with concrete.
Polystyrene naturally has insulating properties. The blocks help to limit heat transfer between the pool water and the surrounding soil. In a heated pool, this can help reduce the energy required to keep the water at temperature.
The final heat savings depend on the complete pool. Soil insulation, a good cover, the desired water temperature, and the weather conditions also affect heat loss.
Permanent formwork for a concrete pool wall
The construction system works with blocks that are built up layer by layer. During construction, the required steel reinforcement is installed. Then, according to the processing instructions, the blocks are filled with concrete.
The concrete core forms the load-bearing pool wall together with the reinforcement. The polystyrene blocks remain in place as insulating formwork. Therefore, no temporary wall formwork needs to be removed after filling.
A good foundation, suitable reinforcement, and correct concrete processing are essential for the final construction. Coordinate these components with the pool size, design, and conditions on the construction site.
Options for a custom-made pool
With the XXL blocks, you build the walls of a structural pool. With suitable components and a good structural design, entry stairs and shallow areas can also become part of the design.
Due to the block height of 50 cm, this version is particularly practical for wall heights that are multiples of this. For non-standard heights or smaller details, additional custom work may be required. Check in advance which accessories or additional block sizes fit this system.
When designing, also take into account pool lighting, sprayers, and wall penetrations. These components are installed during the construction phase, before the walls are filled with concrete.
From a prepared construction pit to a finished wall
Construction begins with excavating and preparing the construction pit. Then, the floor reinforcement and the concrete floor slab are installed according to the construction plan. A flat, correctly executed floor slab forms the basis for placing the first row of blocks.
Then, the walls are built up and provided with reinforcement and built-in components. During these works, the dimensions, alignment, and stability are checked. The connecting, supporting, and filling of the blocks are done according to the instructions for the XXL version. The block height of 50 cm does not automatically determine how much concrete can be poured at once.
After filling, the walls are prepared for a suitable waterproof pool liner. The blocks and the reinforced concrete form the structure; the liner provides the waterproof finish and the final appearance.
Calculate the required quantity in advance
Each XXL block has a wall area of 0.625 m². For an initial estimate, divide the calculated wall area by 0.625. This amounts to an average of 1.6 blocks per square meter of straight wall.
The final order depends on the dimensions, corner connections, recesses, and any stairs or shallow areas. Round up to whole blocks and allow for extra material for cutting waste and damage.
The required concrete volume depends on the internal block construction. Therefore, use the specified concrete consumption for this specific XXL version. Concrete for the floor slab and additional structures should be calculated separately.
Mount your OKU solar collectors securely, safely, and reliably with the universal stainless steel mounting strap! This practical stainless steel mounting strap is specially designed for mounting and supporting OKU solar collectors. Thanks to its strong material, flexible mounting options, and perforated design, this mounting strap is a convenient solution for a stable installation of your solar heating system.
Whether you are setting up a new installation or want to replace existing mounts, this universal mounting strap offers a practical solution for mounting OKU solar collectors on a suitable subframe.
Secure mounting for OKU solar collectors
Secure mounting is essential for the reliable operation of a solar collector installation. OKU solar collectors are often placed on roofs or other suitable structures, where they are exposed to various weather conditions.
With this universal mounting strap, you can securely attach the collectors to a suitable support structure.
The strap helps limit unwanted movement and contributes to a stable installation. The final stability depends on the surface, the mounting materials used, and proper installation.
Made of durable stainless steel
The mounting strap is made of stainless steel (SS). This material is known for its strength, durability, and good corrosion resistance.
Because solar collectors are usually installed outdoors, it is important that mounting materials are resistant to moisture, rain, and varying temperatures.
The use of stainless steel offers several advantages:
Good resistance to corrosion and rust formation.
Suitable for long-term outdoor use.
Strong and durable construction.
Low-maintenance material.
Resistant to various weather conditions.
This makes the mounting strap a practical choice for solar collector installations that remain outdoors for years.
Perforated design for flexible mounting
The universal mounting strap features multiple mounting holes distributed along the length of the strap.
Thanks to these perforations, you can choose different mounting positions and adapt the installation to the situation.
The design with a wider and narrower section offers additional options when positioning the mounting strap.
This makes the strap suitable for various mounting configurations, provided that the mounting points and subframe used are suitable for this purpose.
Ideal for pool solar heating
OKU solar collectors are used to heat pool water using solar energy. By combining multiple collectors, a solar heating system can be assembled that matches the size and heating requirements of the pool.
A stable mounting of these collectors is important in this regard.
The universal stainless steel mounting strap forms a practical mounting component for attaching the collectors to a suitable structure.
This allows you to install your solar heating system in a neat and reliable manner.
Suitable for new installations and replacements
This mounting strap is not only suitable for new OKU solar collector installations, but can also be used to replace existing mounting straps.
When old mounting materials are damaged, worn, or insufficiently secure, replacement can help maintain a safe and stable installation.
When replacing, always check that the mounting strap matches the existing mounting structure in terms of dimensions and mounting points.
Simple and practical mounting
Thanks to the pre-drilled mounting holes, the strap can be mounted with suitable bolts, screws, or other mounting materials.
The mounting method depends on the type of surface and the solar collector's installation instructions.
For a safe installation, it is important to take into account wind loads, the load-bearing capacity of the structure, and the prescribed mounting points.
Note: use only mounting materials that are suitable for the surface and the load of the installation. For roof mounting, a correct and watertight mounting is essential.
Why choose the universal stainless steel mounting strap for OKU solar collectors?
A reliable solar collector installation starts with secure mounting. With this universal stainless steel mounting strap, you choose a durable and practical mounting component that allows you to securely attach OKU solar collectors.
The stainless steel offers good protection against weather conditions, while the perforated design provides various mounting options.
Whether you are maintaining an existing installation or installing a new solar heating system for your pool, this mounting strap is a convenient addition to your mounting materials.
Choose a secure and durable installation for your OKU solar collectors with this universal stainless steel mounting strap!
Note: the exact length, width, material quality, and included mounting materials are not specified. Check this information with the supplier before publishing it as final product specifications.
Discover the ultimate pool cleaning with the Beatbot AquaSense 2 Ultra! This advanced cordless pool robot combines artificial intelligence (AI), powerful suction performance, and six different cleaning modes to thoroughly clean your pool from the bottom to the water surface. Thanks to the innovative side brushes, intelligent navigation, and the integrated Water Clarifying System, you can enjoy an exceptionally complete pool cleaning without the hassle of cables.
The Beatbot AquaSense 2 Ultra is suitable for pools up to 18 x 10 meters and features a powerful 13,400 mAh battery. With an average operating time of 4.5 hours in the standard cleaning mode, this pool robot is designed to efficiently and independently clean even large pools.
Whether it is leaves on the water surface, dirt on the bottom, or deposits along the waterline: the AquaSense 2 Ultra offers a complete cleaning solution.
Advanced AI technology for intelligent pool cleaning
The Beatbot AquaSense 2 Ultra uses smart AI technology to efficiently determine its cleaning route. This allows the robot to adapt to different pool conditions and systematically clean the bottom, walls, and waterline.
The intelligent navigation helps to limit unnecessary movements and make optimal use of the available battery power.
Thanks to the multi-zone function, the robot can also tackle specific pool areas, such as large platforms or bowl-shaped walls, depending on accessibility and conditions.
Six cleaning modes for every situation
With no fewer than six adjustable cleaning programs, you decide how thoroughly and in what way your pool is cleaned.
1. Quick mode – Bottom cleaning
Ideal for a quick maintenance session. The pool robot focuses exclusively on the bottom and removes dirt, sand, and other contaminants.
2. Standard mode – Bottom, walls, and waterline
A complete daily cleaning cycle in which the robot systematically cleans the bottom, pool walls, and waterline.
3. Pro mode – Complete pool cleaning
The most comprehensive cleaning function. The robot cleans the bottom, walls, waterline, and water surface. Ideal when you want to have the entire pool cleaned in one program.
4. ECO mode – Energy-efficient maintenance
In ECO mode, the pool robot cleans the bottom every other day. This keeps the pool regularly clean without having to manually start a program every time.
5. Custom mode – Personal settings
Via the Beatbot app, you can customize the cleaning program to your preferences. This allows you to decide which parts of the pool receive extra attention.
6. Multi-zone mode – Special pool areas
Specially developed for pools with larger platform surfaces or bowl-shaped walls. This mode helps to more effectively clean even more difficult zones.
Extra side brushes for thorough waterline cleaning
What sets the Beatbot AquaSense 2 Ultra apart from many traditional pool robots are the two extra side brushes.
In addition to the four powerful main brushes, this pool robot features two side brushes that provide extra support in removing dirt and deposits along the waterline.
During the cleaning of the water surface, the side brushes also help to move dirt towards the collection system.
This not only tackles the bottom and walls, but also gives extra attention to the often-soiled water edge.
Water surface cleaning – Floating dirt is also removed
Many pool robots limit themselves to cleaning the bottom, walls, and waterline. The Beatbot AquaSense 2 Ultra goes one step further thanks to its integrated skimmer function.
The robot can also clean the water surface and collect floating leaves, insects, and other surface dirt.
With a maximum operating time of approximately 10 hours during water surface cleaning, the robot can continue working for an extended period.
This makes the AquaSense 2 Ultra particularly interesting for pools that are regularly exposed to leaves, insects, and other organic dirt.
Water Clarifying System – For even clearer pool water
The Beatbot AquaSense 2 Ultra features an integrated Water Clarifying System that helps improve the water quality during cleaning.
This system can dispense a specially developed water purification formula into the pool water.
The formula works according to the principle of a flocculant: very small dirt particles are brought together into larger particles, making them easier for the filter system to collect.
This way, the pool robot not only supports mechanical cleaning, but also contributes to clearer pool water.
The Water Clarifying System is a supplementary cleaning function and does not replace regular water treatment, filtration, or disinfection.
Completely cordless thanks to the powerful 13,400 mAh battery
No more tangled cables or cables lying along the pool. The Beatbot AquaSense 2 Ultra operates completely wirelessly thanks to its powerful rechargeable battery.
With a battery capacity of 13,400 mAh, the robot has enough energy for extensive cleaning programs.
Depending on the selected mode, the operating time is:
Standard cleaning: approximately 4.5 hours
Bottom cleaning: up to 5 hours
Water surface cleaning: up to 10 hours
After approximately 4 to 4.5 hours of charging, the battery is fully charged again and ready for the next cleaning cycle.
Smart parking function – Easily remove from the pool
The AquaSense 2 Ultra features an improved automatic parking function.
When the cleaning cycle is complete or the battery is almost empty, the pool robot can navigate to the pool edge and park floating on the water surface.
Via the Beatbot app, you can also instruct the robot to come to the water surface.
This means you do not have to reach down to the bottom to retrieve the pool robot.
Thanks to the convenient Water Release function, the robot quickly drains excess water when lifted, making removal easier.
Operation via the Beatbot app
With the user-friendly Beatbot app, you have control over the cleaning of your pool.
You can easily select a cleaning program, adjust settings, and monitor the status of the pool robot.
The robot is also equipped with physical control buttons, so you can start a cleaning program without a smartphone.
The app offers extra convenience for pool owners who want to automate their pool maintenance as much as possible.
Powerful suction performance and dual filtration
The Beatbot AquaSense 2 Ultra features a powerful suction capacity of 5,500 GPH, which corresponds to approximately 20.8 m³ per hour.
This allows the robot to process large amounts of pool water and collect dirt efficiently.
The integrated filter system features dual filtration with a specified filter fineness of up to 250 microns.
The spacious dirt collection capacity of 3.7 liters provides enough room for leaves, sand, insects, and other pool dirt.
This means you do not have to empty the filter reservoir as often during extensive cleaning sessions.
Suitable for large pools up to 18 x 10 meters
The Beatbot AquaSense 2 Ultra was developed for pools with a maximum dimension of 18 x 10 meters.
Thanks to its powerful drive, long battery life, and intelligent navigation, the robot is suitable for both smaller and larger private pools.
The standard PVC brushes make it particularly suitable for pools with a liner or vinyl finish.
Please note that built-in stairs, narrow steps, and shallow areas may not always be fully cleaned. These areas may require additional manual maintenance.
Why choose the Beatbot AquaSense 2 Ultra?
The Beatbot AquaSense 2 Ultra is an excellent choice for pool owners looking for maximum automation and extensive cleaning options.
While many traditional pool robots only clean the bottom and walls, the AquaSense 2 Ultra also offers waterline and water surface cleaning. In combination with intelligent AI navigation, six cleaning programs, a powerful battery, and extra side brushes, this ensures a particularly complete cleaning.
The integrated Water Clarifying System, automatic parking function, and convenient app operation also make pool maintenance easier and more comfortable.
Choose the Beatbot AquaSense 2 Ultra and experience the latest generation of cordless pool cleaning. Less cleaning work, more swimming enjoyment, and a pool that is always ready for a refreshing dip!
Discover endless fun with the Smoby Disney Winnie the Pooh 2-in-1 Ride-On! This cheerful ride-on is specially designed for young children from 10 months and combines a comfortable ride-on with a handy walker. Thanks to the colorful Winnie the Pooh design, sturdy construction and ergonomic shape, this ride-on is ideal for little adventurers taking their first steps.
The Smoby Winnie the Pooh Ride-On grows with your child's development. Initially, the ride-on can be used as a walker, with the sturdy handle at the back providing extra support while learning to walk. As soon as your child can sit independently and move around with their feet, the walker transforms into a fun ride-on.
2-in-1: From Walker to Ride-On
This versatile walker offers two different ways to play:
1. Walker for First Steps
The integrated handle at the back allows young children to push the walker forward. This encourages them to practice walking, develop their motor skills and build confidence.
2. Ride-On for Independent Riding Fun
When your child is ready, they can sit comfortably on the seat and move around with their feet. The steerable handle allows children to choose their own direction.
Stable and Safe Design
Extra attention was paid to stability when designing the Smoby Winnie the Pooh Ride-On. The ride-on features anti-tip systems at both the front and back, reducing the risk of tipping forward or backward.
The ergonomic design ensures that children have plenty of freedom of movement. This allows their legs to move freely while walking and riding.
Lightweight and Easy to Steer
Weighing just around 1.4 kg, this ride-on is particularly light and easy to move. The steerable handle makes it easy to turn corners and practice coordination through play.
Its compact dimensions make the ride-on suitable for indoor use and on flat, appropriate surfaces.
Convenient Storage Under the Seat
A fun extra is the spacious storage compartment under the seat. Children can use it to carry their favorite toys, stuffed animals or other small items.
This makes every ride a new adventure and allows little explorers to carry their own treasures.
Cheerful Disney Winnie the Pooh Design
The ride-on features a colorful look with the beloved Disney character Winnie the Pooh. The playful design appeals to young children and also makes the ride-on a fun gift for a first birthday.
French Quality from Smoby
The Smoby Winnie the Pooh Ride-On is manufactured in France. Smoby is known for children's toys that focus on ease of use, fun, and child-friendly design.
Thanks to its sturdy construction and versatile uses, this ride-on offers long-lasting fun during different developmental stages.
Why Choose the Smoby Winnie the Pooh Ride-On?
The Smoby Disney Winnie the Pooh Ride-On is more than just a toy. By combining a walker and ride-on, it supports various stages in young children's motor development.
From the first cautious steps to riding around independently: this colorful ride-on encourages movement, exploration and fun.
Give your child a flying start with the Smoby Disney Winnie the Pooh 2-in-1 Ride-On – a cheerful adventure from 10 months!
Safety advice: Use under adult supervision, not on public roads or near stairs. A walker does not prevent falls and should only be used when the child is motorically ready.
The 32 mm 2-way ball valve is a robust and durable valve designed for use in swimming pool systems, irrigation, and other piping systems where the water flow needs to be controlled. This ball valve has a diameter of 32 mm and offers a simple and efficient way to regulate or completely shut off the water flow. Thanks to its 2-way functionality, the valve can direct the water flow in two directions or shut it off, ensuring versatile use in all kinds of piping systems.
The valve is made of sturdy, corrosion-resistant material, ensuring a long service life even in damp and water-intensive environments such as swimming pools. Manual operation via a comfortable handle allows you to easily open and close the valve, even at higher pressures. The 2-way ball valve is easy to install and connects seamlessly to pipes with a diameter of 40 mm, making it suitable for a wide range of applications.The 32 mm 2-way ball valve is a reliable and user-friendly solution for regulating and shutting off water flows in swimming pools and other piping systems. With its robust design and easy installation, this ball valve is ideal for both residential and commercial applications.
Easily prepare your pool for winter with the Azzura Winterizing Set for large pools. This complete set contains everything you need to protect a pool of up to approximately 60 m³ during the cold winter months.
The set consists of 2 x 5 liters of winterizing liquid, 24 connectable winter floats, and 1 gizzmo for the skimmer. This not only protects the pool water, but also reduces the risk of frost damage to the pool and the skimmer.
Complete protection during the winter
The winterizing liquid helps prevent algae growth and contamination of the pool water during the winter period. This makes it much easier to get the pool ready for use again in the spring.
The 24 winter floats are linked together and placed on the water. When the pool water freezes and expands, the floats help to absorb the pressure of the ice. This provides better protection for the pool walls against frost damage.
The included gizzmo is placed in the skimmer. This is also designed to absorb the expansion of freezing water and thus helps to prevent damage to the skimmer.
Contents of the Azzura Winterizing Set
2x winterizing liquid – 5 liters
24x connectable winter floats
1x gizzmo for the skimmer
Everything in one set for a worry-free winter
With the Azzura Winterizing Set for large pools (<60 m³), you don't have to search for the most important winter products separately. A practical all-in-one solution to help your pool water, pool, and skimmer get through the winter better protected.
The W'eau Iseo Spa with heat pump – 2-person is a compact and luxurious hard-sided spa for two people, combined with an energy-efficient external spa heat pump. This allows you not only to enjoy powerful hydromassage and wonderfully warm water, but also to heat the water and maintain its temperature more efficiently.
With its compact dimensions of 210 x 110 x 74 cm, the W'eau Iseo is ideal for smaller gardens, terraces, and covered areas. The spa features two comfortable loungers, allowing both people to relax completely.
With 22 massage jets, a powerful 2 HP massage pump, Balboa control, UVC water treatment, and atmospheric LED lighting, the Iseo offers a complete wellness experience despite its compact size.
Includes energy-efficient spa heat pump
This version of the W'eau Iseo comes in combination with an external spa heat pump.
A heat pump extracts a large portion of the required heat from the outside air and then transfers it to the spa water. As a result, the built-in electric heater has to do less work.
Especially when you use the spa regularly and want to keep the water at temperature for longer periods, a heat pump can significantly reduce energy consumption for heating.
The Iseo features a 50 mm connection for an external heat pump, allowing it to be neatly integrated into the water circuit.
Two comfortable loungers
The W'eau Iseo is specifically designed for two people and features two full-size loungers.
This allows both users to relax fully stretched out instead of having to sit upright. The design of the shell supports the body while the various massage jets provide the hydromassage.
The spa has a capacity of approximately 510 liters. This is relatively low for a fixed two-person spa and means that less water needs to be heated, filtered, and treated than with a larger spa.
22 powerful massage jets
The W'eau Iseo features no fewer than 22 hydrotherapy jets.
These are divided into different sizes:
16 massage jets of 50 mm
4 massage jets of 2 inches
2 large massage jets of 3 inches
By combining different jet sizes, a varied massage is created. The larger jets provide a more powerful, targeted water stream, while the smaller jets distribute the massage over different body zones.
Powerful 2 HP massage pump
The massage jets are powered by a 2 HP dual-speed massage pump.
This gives the compact Iseo enough power for a vigorous hydromassage. You can relax wonderfully while the warm water and water jets massage different parts of the body.
Balboa control system
For technical control, the Iseo is equipped with a Balboa BP200/TP500S control system.
Via the control panel, you can easily manage the main functions of the spa, such as water temperature, massage pump, and lighting.
Balboa is a widely used system for hard-sided spas and is known for its clear and user-friendly operation.
Built-in 2 kW heater
In addition to the external heat pump, the spa remains equipped with its own 2 kW Balboa heater.
This gives you two options for heating the water. The heat pump can be used for energy-efficient heating and temperature maintenance, while the integrated heater remains part of the original spa installation.
The maximum water temperature is 40°C.
Lower heating costs with a heat pump
A traditional electric spa heater converts electrical energy directly into heat. A heat pump works differently: it extracts a large portion of the heat from the outside air.
This allows a heat pump to deliver several kWh of heat to the water for every kWh of electricity consumed.
The actual efficiency depends on factors such as:
Outside temperature
Desired water temperature
Insulation of the spa
Use of the insulating cover
Usage frequency
Settings of the heat pump
The combination of the Iseo with a heat pump can be particularly attractive for long-term temperature maintenance.
UVC water treatment
The W'eau Iseo features an integrated UVC system.
During circulation, the water is guided past the UVC system. This supports regular water treatment and helps reduce the microbiological load of the water.
UVC does not replace normal water treatment. The pH value and disinfectant level must still be checked and corrected regularly.
Filter cartridge for clean spa water
For mechanical filtration, the Iseo uses a replaceable filter cartridge.
The filter captures small dirt particles from the circulating spa water. By rinsing the cartridge regularly and replacing it in a timely manner, the flow through the filter system remains optimal.
For the Iseo, the W'eau Spa Filter Type 14 (e.g., SC714 / 6CH-940) can be used.
Atmospheric LED lighting
Relaxing in the Iseo is also wonderful in the evening.
The spa features LED floor lighting and several small LED light points that provide an atmospheric wellness look.
Combined with the warm water and massage jets, you can easily create your own wellness environment in the garden.
Compact size
A key advantage of the Iseo is its size.
With dimensions of approximately 210 x 110 x 74 cm, the spa is only 110 cm wide. This allows it to fit in places where a traditional square 5- or 6-person spa is often too large.
This makes the Iseo particularly interesting for a smaller garden, terrace, or covered area.
Includes insulating spa cover
An insulating protective cover is included with the spa.
This helps reduce heat loss through the water surface when the spa is not in use. Additionally, the cover keeps leaves, dust, and other debris out of the water.
For a spa with a heat pump, a good insulating cover is extra important. The less heat the spa loses, the less energy is needed to keep the water at temperature.
Our garden pavilion frame is robust and spacious, perfect for enhancing your outdoor space. It combines an industrial style with practical applications for your summer setups.
Steel frame: This pavilion frame is made of powder-coated and galvanized steel, ensuring strength and stability. These materials remain strong even after long-term use, making it an ideal choice for your garden or patio.
Spacious coverage: With dimensions of 6 x 3 meters, this frame provides enough space for gatherings or relaxation. The size allows you to host events comfortably or create a cozy outdoor area without feeling confined.
Industrial design: Inspired by warehouse and loft styles, this frame gives a modern look to your outdoor environment. The sturdy steel construction contributes to a trendy atmosphere, perfect for stylish settings.
Summer use advantage: Specially designed for outdoor use in the warmer months, our pavilion frame lets you enjoy the comfort of the outdoors. The sturdy steel construction supports various uses, from social gatherings to quiet moments.
Outdoor maintenance: The frame requires little maintenance and withstands typical summer conditions well, but it is better not to use it during bad weather such as strong winds or heavy rain.
Good to know:This product is not suitable for use in poor weather conditions such as strong winds, heavy rain, snow, or storms.
Color: Black
Frame color: Black
Material: Steel
Frame material: Powder-coated steel, galvanized steel
Overall dimensions: 600 x 300 x 276.5 cm (L x W x H)
Weight: 18.94 kg
Suitable for outdoor use only
Assembly required: Yes
Delivery includes:
1 x Garden gazebo frame
Color: Black
Frame color: Black
Material: Steel
Frame material: Powder-coated steel, galvanized steel
Overall dimensions: 600 x 300 x 276.5 cm (L x W x H)
Weight: 18.94 kg
Suitable for outdoor use only
Assembly required: Yes
Delivery includes:
1 x Garden gazebo frame
The modern pop-up party tent is designed to enhance your outdoor lifestyle, relaxation, or activities. Its quick setup mechanism allows you to spend more time enjoying the occasion rather than focusing on assembly. This tent adapts to various occasions and offers protection against seasonal changes thanks to its waterproof and UV-resistant materials.
Sturdy Oxford fabric: Our party tent is made of 210D Oxford fabric, which offers excellent resistance to UV rays and rain, providing practical protection in sunny or rainy weather. This fabric makes the tent a suitable choice for seasonal outdoor use where shade and shelter are needed.
Convenient carry bag: The tent comes with a convenient carry bag, making it easy to transport and store when not in use. The compact folded design makes it convenient to carry between different locations and store with your other outdoor gear.
Height-adjustable mechanism: With a manual height-adjustment system, this tent lets you choose from three different height settings, ranging from 227-245 cm. This flexibility makes it suitable for various residential outdoor uses and allows you to adjust the height according to your setup.
Stable installation components: The tent comes with guy ropes and ground pegs for a stable installation. These components help keep the tent well-positioned during use and make the setup more practical for different ground conditions.
Seasonal use: Designed for outdoor use during suitable seasons, this pop-up tent offers shade and shelter for various residential outdoor activities. Its functional design and adjustable height make it a practical addition to gardens, patios, and other home outdoor areas.
Colour: Orange
Material: 210D Oxford with silver coating
Finish: Powder coating
Overall dimensions: 192 x 192 x 245 cm (L x W x H)
Weight: 9.5 kg
Adjustable type: Height-adjustable
Adjustable min/max dimensions: 227-245 cm
Adjustable number of levels: 3
Pop-up design
With 4 side walls
Simple and quick installation
Height-adjustable
Suitable for outdoor use only
Assembly required: Yes
Delivery includes:
1 x Pop-up party tent
1 x Carry bag
4 x Guy lines
8 x Ground peg
Colour: Orange
Material: 210D Oxford with silver coating
Finish: Powder coating
Overall dimensions: 192 x 192 x 245 cm (L x W x H)
Weight: 9.5 kg
Adjustable type: Height-adjustable
Adjustable min/max dimensions: 227-245 cm
Adjustable number of levels: 3
Pop-up design
With 4 side walls
Simple and quick installation
Height-adjustable
Suitable for outdoor use only
Assembly required: Yes
Delivery includes:
1 x Pop-up party tent
1 x Carry bag
4 x Guy lines
8 x Ground peg
This garden pavilion is a versatile shade solution, perfect for your garden or patio. With a spacious 6 x 3 m canopy, it provides ample coverage for gatherings and creates a lovely spot to relax or host guests. The pavilion features a water-resistant PA-coated polyester roof, which protects you from light rain while enhancing the look of your outdoor space.
Water-resistant polyester roof: The roof of the pavilion is made of PA-coated polyester, which protects you from light rain. This ensures your outdoor activities can continue, providing a reliable shelter.
Two-tier ventilation system: This pavilion features a two-tier roof, which ensures good air circulation so you don't suffer from the heat. The ventilation system also provides stability by allowing wind to pass through, reducing the risk of damage.
Sturdy steel frame: Made of powder-coated and galvanized steel, the frame offers a strong and reliable structure. This ensures that the pavilion remains stable and secure, even in windy weather, making it a reliable choice for outdoor use.
Spacious coverage: With dimensions of 6 x 3 m, the pavilion offers plenty of space for various outdoor activities. Whether you are hosting a garden party or just want to enjoy a quiet afternoon, the spacious coverage meets all your needs.
Easy maintenance: This pavilion is suitable for outdoor use and requires little maintenance. You can easily clean it with a damp cloth, so it remains a lasting addition to your garden.
Good to know:This product is not suitable for use in bad weather conditions such as strong winds, heavy rain, snow, or storms.
Colour: Bordeaux red
Frame colour: Black
Material: Polyester and steel
Frame material: Powder-coated steel, galvanized steel
Fabric composition: Polyester
Fabric weight: 190 gsm
Overall dimensions: 600 x 300 x 276.5 cm (L x W x H)
Weight: 25.78 kg
Water-resistant PA-coated polyester roof
Roof with drainage and two-tier ventilation
Suitable for outdoor use only
Assembly required: Yes
Delivery includes:
1 x Garden pavilion frame: 600 x 300 x 276.5 cm (L x W x H)
1 x Pavilion cover: 600 x 300 x 76.5 cm (L x W x H)
Colour: Bordeaux red
Frame colour: Black
Material: Polyester and steel
Frame material: Powder-coated steel, galvanized steel
Fabric composition: Polyester
Fabric weight: 190 gsm
Overall dimensions: 600 x 300 x 276.5 cm (L x W x H)
Weight: 25.78 kg
Water-resistant PA-coated polyester roof
Roof with drainage and two-tier ventilation
Suitable for outdoor use only
Assembly required: Yes
Delivery includes:
1 x Garden pavilion frame: 600 x 300 x 276.5 cm (L x W x H)
1 x Pavilion cover: 600 x 300 x 76.5 cm (L x W x H)
This garden gazebo with mesh walls is a stylish and practical solution for outdoor parties. It creates a comfortable atmosphere for any gathering on sunny days. Perfect for gardens and patios, its industrial look blends rugged materials with practical features, giving your outdoor space an urban flair.
Durable construction This gazebo is made of polyester and steel for reliable quality for all your outdoor activities. Polyester is waterproof and protects against summer showers, while the steel provides strong support, making this an ideal choice for garden parties and family gatherings.
Complete package The set offers 2 gazebos and a large canopy of 600.5 x 300.5 cm, along with 14 adjustable mesh walls. This makes the gazebo ideal for various outdoor uses, with room for both large and small groups.
Good air circulation Enjoy the ventilation the roof provides, which creates a pleasant breeze under the canopy. This smart design ensures a cozy atmosphere, so your guests can relax and enjoy every moment.
Flexible wall configuration The black mesh walls offer privacy while still providing ventilation, attached with Velcro. This makes for a customizable outdoor space perfect for weddings, birthdays, or informal parties, entirely according to your wishes.
Extraordinary use This gazebo is specially designed for outdoor use, perfect for summer events in gardens or on terraces. It combines functional elements with a beautiful appearance and offers a stylish, adaptable structure for various leisure activities.
Good to know:This product is not suitable for use in bad weather conditions such as strong winds, heavy rain, snow, or storms.
Colour: Burgundy
Frame colour: Black
Material: Polyester and steel
Frame material: Powder-coated steel, galvanized steel
Fabric weight: 190 gsm
Overall dimensions: 600 x 300 x 276.5 cm (L x W x H)
Weight: 28.92 kg
Roof with air circulation design
Black mesh side walls with Velcro closures
Only suitable for outdoor use
Assembly required: Yes
Delivery includes:
1 x Garden gazebo frame: 600 x 300 x 276.5 cm (L x W x H)
1 x Garden gazebo airy roof: 600 x 300 x 76.5 cm (L x W x H)
6 x Side walls
Colour: Burgundy
Frame colour: Black
Material: Polyester and steel
Frame material: Powder-coated steel, galvanized steel
Fabric weight: 190 gsm
Overall dimensions: 600 x 300 x 276.5 cm (L x W x H)
Weight: 28.92 kg
Roof with air circulation design
Black mesh side walls with Velcro closures
Only suitable for outdoor use
Assembly required: Yes
Delivery includes:
1 x Garden gazebo frame: 600 x 300 x 276.5 cm (L x W x H)
1 x Garden gazebo airy roof: 600 x 300 x 76.5 cm (L x W x H)
6 x Side walls
This modern party tent is an elegant addition to backyard activities, combining functionality and style for various uses around the home. Whether you are enjoying a garden dinner or everyday activities at home, the clean lines and minimalist design of this party tent give your home an elegant accent and form a beautiful contrast with the surrounding garden landscape.
Materials: The party tent is made of UV-resistant and water-resistant polyethylene, complemented by a rust-resistant steel frame. These materials make the tent an excellent choice for regular use in the backyard, preventing damage from sunlight and water erosion while maintaining a sleek, elegant appearance.
Included components: Each tent is equipped with eight removable side panels with decorative windows and two door panels with zippers. These additions offer the flexibility to create enclosed spaces for privacy and shelter, or open sections to allow easy access in and out of the tent.
Design features: With a collapsible manual mechanism, the tent simplifies the setup and takedown processes, making it easy to adapt to any garden setting. Its foldable nature ensures efficient storage, ideal for households and homeowners who manage temporary structures.
Recommended use: This party tent is a perfect addition to various garden settings, suitable for leisure, dining, and daily activities. Thanks to the various dimensions, the tent can be set up in gardens, on patios, and on terraces, enhancing the atmosphere at home with minimal effort for setup.
Care & maintenance: Use a damp cloth to clean the tent to ensure its long-term quality. Protect the structure by removing the panels during adverse weather to prevent potential damage and keep the tent in pristine condition.
Good to know:This product is not suitable for use in bad weather, such as strong winds, heavy rain, snow, storms, etc.This product is not suitable for use as a carport
Color: Red
Material: PE and steel
Fabric composition: 90 g/㎡
Overall dimensions: 900 x 300 x 255 cm (L x W x H)
Weight: 17.45 kg
Adjustable type: Collapsible
Foldable for easy storage
Versatile use
With side walls
Suitable for outdoor use only
Assembly required: Yes
Delivery includes:
1 x Party tent
Color: Red
Material: PE and steel
Fabric composition: 90 g/㎡
Overall dimensions: 900 x 300 x 255 cm (L x W x H)
Weight: 17.45 kg
Adjustable type: Collapsible
Foldable for easy storage
Versatile use
With side walls
Suitable for outdoor use only
Assembly required: Yes
Delivery includes:
1 x Party tent
This garden pavilion with mesh walls is a great addition to any outdoor space, where functionality and style come together. Its spacious dimensions and sturdy design make it perfect for summer gatherings, with plenty of covered space to host guests or simply enjoy a quiet afternoon outdoors. The pavilion's industrial style adds a modern touch to your garden or patio.
Innovative roof design The pavilion features a roof that promotes air circulation, ensuring a refreshing breeze even on the hottest days. This design not only ensures comfort but also adds a unique architectural accent that stands out in any outdoor environment.
Flexible mesh walls Equipped with black mesh walls, this pavilion offers a versatile setting that can be personalized. The hook-and-loop fasteners make it easy to adjust the configuration, allowing for both privacy and open-air enjoyment, depending on the occasion and preference.
Durable polyester and steel construction Made of polyester, this pavilion promises long-lasting durability with its water-repellent properties. Supported by a robust steel frame, it combines strength and resilience, ensuring it withstands seasonal elements while maintaining its sleek aesthetic.
Designed for outdoor use This pavilion is perfect for summer use, designed to fit beautifully into gardens and on patios and enhance the outdoor experience. Its large dimensions provide ample space to entertain family and friends, making it a valuable addition to seasonal setups.
Maintenance and setup With simple maintenance instructions, the pavilion requires minimal upkeep, ensuring it stays in top condition with basic care. Assembly is required by two people with a screwdriver, allowing users to set up their space quickly without hassle.
Good to know:This product is not suitable for use in poor weather conditions such as strong wind, heavy rain, snow, or storms.
Color: Burgundy red
Frame color: Black
Material: Polyester and steel
Frame material: Powder-coated steel, galvanized steel
Fabric composition: Polyester
Fabric weight: 190 gsm
Overall dimensions: 600 x 300 x 276.5 cm (L x W x H)
Weight: 28.22 kg
Waterproof PA-coated polyester roof
Roof with drainage and two-tier ventilation
Black mesh side walls with hook-and-loop fasteners
Suitable for outdoor use only
Assembly required: Yes
Delivery includes:
1 x Garden pavilion frame: 600 x 300 x 276.5 cm (L x W x H)
1 x Garden pavilion vented roof: 600 x 300 x 76.5 cm (L x W x H)
6 x Side walls
Color: Burgundy red
Frame color: Black
Material: Polyester and steel
Frame material: Powder-coated steel, galvanized steel
Fabric composition: Polyester
Fabric weight: 190 gsm
Overall dimensions: 600 x 300 x 276.5 cm (L x W x H)
Weight: 28.22 kg
Waterproof PA-coated polyester roof
Roof with drainage and two-tier ventilation
Black mesh side walls with hook-and-loop fasteners
Suitable for outdoor use only
Assembly required: Yes
Delivery includes:
1 x Garden pavilion frame: 600 x 300 x 276.5 cm (L x W x H)
1 x Garden pavilion vented roof: 600 x 300 x 76.5 cm (L x W x H)
6 x Side walls
This modern party tent is an elegant addition for backyard activities, combining functionality and style for various uses around the home. Whether you are enjoying a garden dinner or everyday activities at home, the clean lines and minimalist design of this party tent give your home an elegant accent and form a beautiful contrast with the surrounding garden landscape.
Materials: The party tent is made of UV-resistant and water-resistant polyethylene, complemented by a rust-protected steel frame. These materials make the tent an excellent choice for regular backyard use, preventing damage from sunlight and water erosion while maintaining a sleek, elegant appearance.
Included components: Each tent is equipped with eight removable side panels with decorative windows and two door panels with zippers. These additions provide the flexibility to create enclosed spaces for privacy and shelter, or open areas to allow easy access in and out of the tent.
Design features: With a collapsible manual mechanism, the tent simplifies the assembly and disassembly processes, allowing it to be easily adapted to any garden setting. Its foldable nature ensures efficient storage, ideal for households and homeowners managing temporary structures.
Recommended use: This party tent is a perfect addition to diverse garden settings, suitable for leisure, dining, and daily activities. Thanks to the various dimensions, the tent can be set up in gardens, on patios, and on terraces, enhancing the home atmosphere with minimal setup effort.
Care & maintenance: Use a damp cloth to clean the tent to ensure its long-term quality. Protect the structure by removing the panels during adverse weather conditions to prevent potential damage and keep the tent in pristine condition.
Good to know:This product is not suitable for use in bad weather, such as strong wind, heavy rain, snow, storms, etc.This product is not suitable for use as a carport
Color: Light gray
Material: PE and steel
Fabric composition: 90 g/㎡
Overall dimensions: 900 x 300 x 255 cm (L x W x H)
Weight: 17.49 kg
Adjustable type: Collapsible
With sidewalls
Foldable for easy storage
Versatile use
Suitable for outdoor use only
Assembly required: Yes
Delivery includes:
1 x Party tent
Color: Light gray
Material: PE and steel
Fabric composition: 90 g/㎡
Overall dimensions: 900 x 300 x 255 cm (L x W x H)
Weight: 17.49 kg
Adjustable type: Collapsible
With sidewalls
Foldable for easy storage
Versatile use
Suitable for outdoor use only
Assembly required: Yes
Delivery includes:
1 x Party tent
This garden pavilion features a striking industrial style that fits perfectly into modern outdoor spaces. It transforms your patio and garden into a chic area, with a look reminiscent of urban lofts. Designed for summer outdoor use, it offers a blend of functionality and style. Ideal for family gatherings or social events, it is an elegant centerpiece where beautiful memories are made. The sturdy frame and modern design give you confidence that it can withstand the elements, ensuring years of enjoyment.
Durable materials: This pavilion is made of polyester and steel, ensuring robust durability. Polyester is lightweight and strong, perfect for weather resistance. The steel components provide extra support and ensure stability, even in strong winds.
Complete package: Supplied with two frames measuring 600.5 by 300.5 by 276.5 centimeters each and a canopy of 600.5 by 300.5 centimeters. This complete package provides plenty of shade for gatherings, whether it is sunny or lightly raining, allowing your outdoor space to be expanded effortlessly.
Functional air ventilation: The pavilion has a roof specifically designed for air circulation, keeping the area under the canopy cool. This clever addition lets in fresh air, ensuring outdoor activities remain pleasant and refreshing, even in warm weather.
Seasonal design: This pavilion is built specifically for summer, offering shade from the sun. It is a versatile hub for summer activities. The thoughtful design and construction combine functionality with style for outdoor gatherings.
Easy maintenance: Designed for longevity, this pavilion requires only simple cleaning using approved methods, keeping it in top condition and ready for use without any hassle.
Good to know:This product is not suitable for use in bad weather conditions such as strong winds, heavy rain, snow, or storms.
Color: Brown
Frame color: Black
Material: Polyester and steel
Frame material: Powder-coated steel, galvanized steel
Fabric composition: Polyester
Fabric weight: 190 gsm
Overall dimensions: 600 x 300 x 276.5 cm (L x W x H)
Weight: 25.04 kg
Waterproof PA-coated polyester roof
Roof with drain and two-tier ventilation
Suitable for outdoor use only
Assembly required: Yes
Delivery includes:
1 x Garden pavilion frame: 600 x 300 x 276.5 cm (L x W x H)
1 x Pavilion canopy: 600 x 300 x 76.5 cm (L x W x H)
Color: Brown
Frame color: Black
Material: Polyester and steel
Frame material: Powder-coated steel, galvanized steel
Fabric composition: Polyester
Fabric weight: 190 gsm
Overall dimensions: 600 x 300 x 276.5 cm (L x W x H)
Weight: 25.04 kg
Waterproof PA-coated polyester roof
Roof with drain and two-tier ventilation
Suitable for outdoor use only
Assembly required: Yes
Delivery includes:
1 x Garden pavilion frame: 600 x 300 x 276.5 cm (L x W x H)
1 x Pavilion canopy: 600 x 300 x 76.5 cm (L x W x H)
This modern party tent is an elegant addition for backyard activities, combining functionality and style for various uses around the home. Whether you are enjoying a garden dinner or everyday activities at home, the clean lines and minimalist design of this party tent provide an elegant accent to your home and form a beautiful contrast with the surrounding garden landscape.
Materials: The party tent is made of UV-resistant and water-resistant polyethylene, complemented by a rust-resistant steel frame. These materials make the tent an excellent choice for regular backyard use, preventing damage from sunlight and water erosion while maintaining a sleek, elegant appearance.
Included parts: Each tent is equipped with eight removable side panels with decorative windows and two door panels with zippers. These additions offer the flexibility to create closed spaces for privacy and shelter, or open sections to allow easy access in and out of the tent.
Design features: With a collapsible manual mechanism, the tent simplifies the assembly and disassembly processes, making it easy to adapt to any garden setting. Its foldable nature ensures efficient storage, ideal for households and homeowners managing temporary structures.
Recommended use: This party tent is a perfect addition to various garden settings, suitable for leisure, dining, and daily activities. Thanks to the various dimensions, the tent can be set up in gardens, on patios, and on terraces, enhancing the atmosphere at home with minimal setup effort.
Care & maintenance: Use a damp cloth to clean the tent to ensure its long-term quality. Protect the structure by removing the panels during adverse weather to prevent potential damage and keep the tent in pristine condition.
Good to know:This product is not suitable for use in bad weather, such as strong winds, heavy rain, snow, storms, etc.This product is not suitable for use as a carport
Colour: Red
Material: PE and steel
Fabric composition: 90 g/㎡
Overall dimensions: 1200 x 300 x 255 cm (L x W x H)
Weight: 22.26 kg
Adjustable type: Foldable
With sidewalls
Collapsible for easy storage
Versatile use
Suitable for outdoor use only
Assembly required: Yes
Delivery includes:
1 x Party tent
Colour: Red
Material: PE and steel
Fabric composition: 90 g/㎡
Overall dimensions: 1200 x 300 x 255 cm (L x W x H)
Weight: 22.26 kg
Adjustable type: Foldable
With sidewalls
Collapsible for easy storage
Versatile use
Suitable for outdoor use only
Assembly required: Yes
Delivery includes:
1 x Party tent
This modern party tent is an elegant addition to backyard activities, combining functionality and style for various uses around the home. Whether you are enjoying a garden dinner or everyday activities at home, the clean lines and minimalist design of this party tent give your home an elegant accent and form a beautiful contrast with the surrounding garden landscape.
Materials: The party tent is made of UV-resistant and water-resistant polyethylene, complemented by a rust-protected steel frame. These materials make the tent an excellent choice for regular backyard use, preventing damage from sunlight and water erosion while maintaining a clean, elegant appearance.
Included parts: Each tent is equipped with eight removable side panels with decorative windows and two door panels with zippers. These additions provide the flexibility to create enclosed spaces for privacy and shelter, or open areas to allow for easy passage in and out of the tent.
Design features: With a collapsible manual mechanism, the tent simplifies the assembly and disassembly processes, making it easy to adapt to any garden setting. Its foldable nature ensures efficient storage, ideal for households and homeowners managing temporary structures.
Recommended use: This party tent is a perfect addition to various garden settings, suitable for leisure, dining, and daily activities. Thanks to the various dimensions, the tent can be set up in gardens, on patios, and on terraces, enhancing the home atmosphere with minimal setup effort.
Care & maintenance: Use a damp cloth to clean the tent to ensure long-term quality. Protect the structure by removing the panels during adverse weather to prevent potential damage and keep the tent in pristine condition.
Good to know:This product is not suitable for use in bad weather, such as strong winds, heavy rain, snow, storms, etc.This product is not suitable for use as a carport
Color: Red
Material: PE and steel
Fabric composition: 90 g/㎡
Overall dimensions: 300 x 300 x 255 cm (L x W x H)
Weight: 7.78 kg
Adjustable type: Collapsible
Foldable for easy storage
Versatile use
With sidewalls
Suitable for outdoor use only
Assembly required: Yes
Delivery includes:
1 x Party tent
Color: Red
Material: PE and steel
Fabric composition: 90 g/㎡
Overall dimensions: 300 x 300 x 255 cm (L x W x H)
Weight: 7.78 kg
Adjustable type: Collapsible
Foldable for easy storage
Versatile use
With sidewalls
Suitable for outdoor use only
Assembly required: Yes
Delivery includes:
1 x Party tent
