10 in stock
Ordered before 10:00 PM, shipped today
Complete your ice bath with the W’eau ice bath chiller! No more lugging around ice cubes, but always the perfect temperature between -5 °C and 43 °C, fully adjustable to your preference. This chiller is ideal for athletes who want to recover faster, as well as for those who want to reduce stress or simply enjoy the benefits of cold therapy. Thanks to the Tuya App, you can easily control the chiller with your smartphone, so your ice bath is always ready whenever you want.
Plug & Play convenience
The W’eau ice bath chiller is delivered ready to use. Place it next to your ice bath, connect the 20 mm fitting, plug it into the socket, and set the desired temperature. A 100-liter bath is cooled in approx. 1 hour and 20 minutes, and a 500-liter bath in approximately 6 hours and 40 minutes.
User-friendly and mobile
Thanks to its smart design, handles, and included wheels, you can move the chiller easily. With a noise level of less than 49 dB (at a distance of 1m), it is also quieter than a normal conversation – ideal for relaxing in peace.
Stylish and low-maintenance
The neat finish and compact design ensure a sleek look in your garden or gym. For maintenance, the chiller has convenient service access on the side, so you can easily replace filters or parts.
11 in stock
Ordered before 10:00 PM, shipped today
The W’eau Iseo Spa is a compact, luxurious permanent spa specifically developed for two people. With two full-sized loungers, no fewer than 22 powerful massage jets, atmospheric LED lighting, and a reliable Balboa control system, you can bring a complete wellness experience to your own garden or terrace. Thanks to its external dimensions of only 210 x 110 x 74 cm, the Iseo also takes up significantly less space than many traditional permanent spas.
The Iseo stands out primarily for its combination of compact size and full-fledged spa comfort. Both people can relax lying down, meaning you don't have to sit upright next to each other. The ergonomically shaped shell supports the body while the various massage jets specifically target relaxation for your back, shoulders, legs, and feet, among other areas.
Powerful hydromassage with 22 jets
Despite its compact size, the W’eau Iseo features a serious massage system. A total of 22 hydromassage jets are distributed across the two loungers:
16 powerful 50 mm massage jets
4 powerful 2-inch massage jets
2 large 3-inch massage jets
Powerful 2 HP two-speed massage pump
By combining different sizes of jets, a varied massage is created. The smaller jets provide a more targeted water stream, while the larger jets massage a wider area of the body. This makes the Iseo not only suitable for relaxing quietly in warm water, but also provides the powerful hydromassage you expect from a permanent spa.
Two comfortable loungers
An important advantage of the Iseo is its layout. The spa is truly designed around two loungers and does not have traditional seats. This optimizes the use of the available space.
With a capacity of approximately 510 liters, the amount of water remains relatively limited. This is favorable for heating, maintaining, and refreshing the spa water. At the same time, the shell offers enough room for two people to relax comfortably.
Balboa control system
For technology and operation, the Iseo uses the well-known Balboa BP200/TP500S control system. You can easily manage the spa’s most important functions via the control panel.
The integrated Balboa heater has an output of 2 kW and can heat the water up to a maximum of 40 °C. Under suitable conditions, a heating rate of approximately 1.5 to 2.5 °C per hour is specified.
For extra convenience, the spa can optionally be expanded with a Balboa ControlMySpa WiFi module. This allows compatible spa functions to be controlled remotely.
Prepared for an external heat pump
An interesting advantage of the W’eau Iseo is the option to connect an external spa heat pump. The spa is prepared for this with a 50 mm heat pump connection.
For people who use the spa frequently, a suitable heat pump can be an interesting addition. Instead of heating exclusively with electricity using the built-in heater, a heat pump can use heat from the outside air to warm the water.
UVC water treatment
The Iseo is equipped with a UVC unit. This involves treating water flowing past a UV lamp with ultraviolet light. This supports water maintenance by helping to inactivate microorganisms.
UVC does not, however, fully replace normal spa water maintenance. The pH value and disinfectant level of the water must still be maintained correctly.
Additionally, the spa uses a replaceable W’eau spa filter type 14 filter cartridge to remove suspended contaminants from the water.
Atmospheric LED lighting
The W’eau Iseo also comes into its own in the evening. The spa features atmospheric lighting in the shell. The combination of warm water, hydromassage, and lighting ensures that the spa can be used both during the day and in the evening as a compact wellness spot.
Well-insulated permanent spa
The Iseo has a sturdy acrylic shell and an insulated construction. Good insulation is important for a permanent spa, as the water is kept at temperature for long periods.
After use, you place the included insulating cover over the spa. This helps limit heat loss at the top while simultaneously preventing leaves, dust, and other debris from easily getting into the water.
Compact size
With external dimensions of 210 x 110 cm, the Iseo is particularly interesting if you want a real permanent spa but do not have the space for a large square model.
The spa is only 74 cm high, while the water line is approximately 67 cm. When empty, the spa weighs about 167 kg. When filled, the total weight is approximately 677 kg, so placement on a sufficiently sturdy, level, and load-bearing surface is important.
Plug & Play on 230 volts
The W’eau Iseo runs on 230 V and is offered as a Plug & Play spa. This makes installation easier than with many larger permanent spas that require a heavier electrical installation.
However, you must always take electrical regulations and the requirements in the installation manual into account, especially since electricity and water are in close proximity here.
Compact private wellness for two
The W’eau Iseo Spa – 2 person is particularly interesting for those who do not want a huge jacuzzi in their garden, but are looking for the comfort and technology of a real permanent spa. The combination of two loungers, 22 hydromassage jets, Balboa technology, UVC water treatment, atmospheric lighting, and the option to connect an external heat pump makes the Iseo remarkably complete.
With only 510 liters of water and dimensions of 210 x 110 cm, you can create a full-fledged wellness spot even in a relatively limited area where you can relax together all year round.
12 in stock
Ordered before 10:00 PM, shipped today
Protect your spa optimally against weather influences with the W'eau Iseo Spa Protective Cover 210 x 110 x 85 cm. This high-quality protective cover has been specially developed to protect both the spa cover and the entire spa cabinet against rain, snow, UV radiation, leaves, dust, and other dirt. Thanks to the extra-high design, not only does the cover stay clean, but the entire exterior of the spa is also protected. This significantly extends the lifespan of both the spa and the cover.
The protective cover is made of strong, water-resistant, and breathable polyester. This high-quality material prevents rainwater from soaking into the spa cover, which helps keep the cover from becoming heavy. At the same time, the breathable material ensures that moisture can escape, limiting condensation and mold formation.
With dimensions of 210 x 110 x 85 cm, this protective cover is perfectly suited for spas with an outer dimension of 210 x 110 cm. The cover has an overlap of approximately 10 cm all around and is equipped with a sturdy drawstring, making it easy to fasten tightly around the spa. This keeps the cover neatly in place, even in strong winds.
In addition to protection against dirt, the cover also prevents the spa cabinet from discoloring due to sunlight and reduces wear and tear caused by rain, frost, and temperature fluctuations. This keeps your spa looking like new for longer and means you have to spend less time on maintenance.
For optimal results, it is recommended to create sufficient ventilation under the cover. For example, place a bucket or ball under the cover so that rainwater runs off easily and no water pockets form. Additionally, remove the cover regularly so that the spa cover can air out properly.
The W'eau Iseo Spa Protective Cover is the ideal choice for spa owners who want to optimally protect their investment and enjoy a neat, clean, and well-maintained spa for years to come.
The W'eau Iseo Spa with heat pump – 2-person is a compact and luxurious hard-sided spa for two people, combined with an energy-efficient external spa heat pump. This allows you not only to enjoy powerful hydromassage and wonderfully warm water, but also to heat the water and maintain its temperature more efficiently.
With its compact dimensions of 210 x 110 x 74 cm, the W'eau Iseo is ideal for smaller gardens, terraces, and covered areas. The spa features two comfortable loungers, allowing both people to relax completely.
With 22 massage jets, a powerful 2 HP massage pump, Balboa control, UVC water treatment, and atmospheric LED lighting, the Iseo offers a complete wellness experience despite its compact size.
Includes energy-efficient spa heat pump
This version of the W'eau Iseo comes in combination with an external spa heat pump.
A heat pump extracts a large portion of the required heat from the outside air and then transfers it to the spa water. As a result, the built-in electric heater has to do less work.
Especially when you use the spa regularly and want to keep the water at temperature for longer periods, a heat pump can significantly reduce energy consumption for heating.
The Iseo features a 50 mm connection for an external heat pump, allowing it to be neatly integrated into the water circuit.
Two comfortable loungers
The W'eau Iseo is specifically designed for two people and features two full-size loungers.
This allows both users to relax fully stretched out instead of having to sit upright. The design of the shell supports the body while the various massage jets provide the hydromassage.
The spa has a capacity of approximately 510 liters. This is relatively low for a fixed two-person spa and means that less water needs to be heated, filtered, and treated than with a larger spa.
22 powerful massage jets
The W'eau Iseo features no fewer than 22 hydrotherapy jets.
These are divided into different sizes:
16 massage jets of 50 mm
4 massage jets of 2 inches
2 large massage jets of 3 inches
By combining different jet sizes, a varied massage is created. The larger jets provide a more powerful, targeted water stream, while the smaller jets distribute the massage over different body zones.
Powerful 2 HP massage pump
The massage jets are powered by a 2 HP dual-speed massage pump.
This gives the compact Iseo enough power for a vigorous hydromassage. You can relax wonderfully while the warm water and water jets massage different parts of the body.
Balboa control system
For technical control, the Iseo is equipped with a Balboa BP200/TP500S control system.
Via the control panel, you can easily manage the main functions of the spa, such as water temperature, massage pump, and lighting.
Balboa is a widely used system for hard-sided spas and is known for its clear and user-friendly operation.
Built-in 2 kW heater
In addition to the external heat pump, the spa remains equipped with its own 2 kW Balboa heater.
This gives you two options for heating the water. The heat pump can be used for energy-efficient heating and temperature maintenance, while the integrated heater remains part of the original spa installation.
The maximum water temperature is 40°C.
Lower heating costs with a heat pump
A traditional electric spa heater converts electrical energy directly into heat. A heat pump works differently: it extracts a large portion of the heat from the outside air.
This allows a heat pump to deliver several kWh of heat to the water for every kWh of electricity consumed.
The actual efficiency depends on factors such as:
Outside temperature
Desired water temperature
Insulation of the spa
Use of the insulating cover
Usage frequency
Settings of the heat pump
The combination of the Iseo with a heat pump can be particularly attractive for long-term temperature maintenance.
UVC water treatment
The W'eau Iseo features an integrated UVC system.
During circulation, the water is guided past the UVC system. This supports regular water treatment and helps reduce the microbiological load of the water.
UVC does not replace normal water treatment. The pH value and disinfectant level must still be checked and corrected regularly.
Filter cartridge for clean spa water
For mechanical filtration, the Iseo uses a replaceable filter cartridge.
The filter captures small dirt particles from the circulating spa water. By rinsing the cartridge regularly and replacing it in a timely manner, the flow through the filter system remains optimal.
For the Iseo, the W'eau Spa Filter Type 14 (e.g., SC714 / 6CH-940) can be used.
Atmospheric LED lighting
Relaxing in the Iseo is also wonderful in the evening.
The spa features LED floor lighting and several small LED light points that provide an atmospheric wellness look.
Combined with the warm water and massage jets, you can easily create your own wellness environment in the garden.
Compact size
A key advantage of the Iseo is its size.
With dimensions of approximately 210 x 110 x 74 cm, the spa is only 110 cm wide. This allows it to fit in places where a traditional square 5- or 6-person spa is often too large.
This makes the Iseo particularly interesting for a smaller garden, terrace, or covered area.
Includes insulating spa cover
An insulating protective cover is included with the spa.
This helps reduce heat loss through the water surface when the spa is not in use. Additionally, the cover keeps leaves, dust, and other debris out of the water.
For a spa with a heat pump, a good insulating cover is extra important. The less heat the spa loses, the less energy is needed to keep the water at temperature.
W'eau Jet Clean - 500 ml is a powerful cleaner specially designed to remove oils, dirt, and mineral deposits from the pipes and jets of your spa. This 'invisible cleaner' targets the parts of the spa you don't see, but which are essential for proper water flow and the maintenance of your equipment. By cleaning the pipes and jets, W'eau Jet Clean prevents the buildup of dirt that can restrict water circulation and cause potential damage to the equipment. We recommend using the product every three months, just before changing the water, to ensure your spa continues to function optimally.
Safety instructions:
Causes skin irritation and serious eye damage.
Very toxic to aquatic life with long-lasting effects.
Always wear protective gloves and keep the product out of reach of children.
Store the product in a well-ventilated area and in a tightly closed container.
W'eau Jet Clean is the ideal solution to ensure that your spa always functions properly and remains free from harmful buildups of dirt, oils, and minerals.
The W'eau 20-gram small chlorine tablets are specially designed for disinfecting water in swimming pools, spas, and hot tubs. In a 1 kg pack, these tablets offer an easy and effective way to keep your pool clean and hygienic. The tablets are stabilized, which means they are resistant to degradation by sunlight and therefore have a long-lasting effect. They dissolve slowly and ensure a continuous release of chlorine, making them ideal for maintaining smaller pools, spas, or above-ground pools.
Ideal Dosage for Small Pools The smaller 20-gram chlorine tablets are perfectly suited for above-ground pools or other smaller water features, where large tablets might be too strong. Due to their stabilized action, the tablets offer a long-lasting, consistent chlorine release without the need for constant adjustment. This makes maintenance simpler and more cost-effective.
User-Friendly and Reliable Because the tablets can easily be placed in a chlorine floater or skimmer, they are very convenient to use. They dissolve slowly in the water, providing constant, uniform disinfection. This helps to keep bacteria and algae under control and ensures clear, hygienic swimming water. The tablets are also safer and more precise to use than powder, as they dissolve gradually and do not release their active ingredients abruptly.
Safety and Usage Instructions When using chlorine tablets, it is essential to follow the safety regulations strictly. Always add the tablets to the water and never the other way around. Keep chlorine tablets separate from other chemicals to prevent dangerous reactions. Read the instructions on the packaging carefully and always wear protective gloves when handling chemicals.With W'eau small chlorine tablets, you can maintain clear and clean water in your pool or spa with minimal maintenance.
PLEASE NOTE: Packaging damaged, CONTENTS OK.Ships in original packaging, but the lid and exterior are damaged.The W'eau 20-gram small chlorine tablets are specially designed for disinfecting water in swimming pools, spas, and hot tubs. In a 5 kg pack, these tablets offer an easy and effective way to keep your pool clean and hygienic. The tablets are stabilized, meaning they are resistant to degradation by sunlight and therefore have a long-lasting effect. They dissolve slowly and ensure a continuous release of chlorine, which is ideal for maintaining smaller pools, spas, or above-ground pools.
Ideal Dosage for Small Pools The smaller 20-gram chlorine tablets are perfectly suited for above-ground pools or other smaller bodies of water where large tablets might be too strong. Thanks to their stabilized action, the tablets offer long-lasting, consistent chlorine release without the need for constant adjustment. This makes maintenance simpler and more cost-effective.
User-Friendly and Reliable Because the tablets can easily be placed in a chlorine floater or skimmer, they are very easy to use. They dissolve slowly in the water, providing constant, even disinfection. This helps keep bacteria and algae under control and ensures clear, hygienic swimming water. The tablets are also safer and more precise to use than powder, as they dissolve gradually and do not release their active ingredients all at once.
Safety and Instructions for Use When using chlorine tablets, it is essential to strictly follow safety regulations. Always add the tablets to the water, never the other way around. Keep chlorine tablets separate from other chemicals to prevent dangerous reactions. Read the instructions on the packaging carefully and always wear protective gloves when handling chemicals.With W'eau small chlorine tablets, you can maintain clear and clean water in your pool or spa with minimal maintenance.
Experience ultimate relaxation in the luxurious W’eau Lagune spa with seating for six – perfect for cozy moments with family or friends. This high-quality spa combines powerful hydromassage, atmospheric lighting, and energy efficiency in one stylish design. Thanks to the included hybrid heat pump, you can enjoy comfort and wellness without the high energy bill.
Whether you want to unwind after a long day or let your muscles be pampered by the powerful jets, the W'eau Lagune offers a complete wellness experience, right in your own home.
The 40 jets of this W'eau spa provide a powerful hydromassage. Do you prefer an extra firm or a more relaxing massage? You can easily adjust the jet pressure with the dial on the jets. This can be set individually for each seat—convenient, right? While the W'eau Lagune spa is incredibly cozy and snug for 6 people, you'll have more space and be even more comfortable with four.
High-quality systems
This spa is equipped with the Balboa control system, meaning that the highest quality materials are used under the hood. The spa water is disinfected using an ozone generator. The ozone gas is dispersed into the water via the jets, keeping the water fresh and clear for longer compared to using chlorine alone. This also allows for slightly less chlorine usage, resulting in less chlorine smell and less eye irritation. In addition, the spa features a powerful 2-speed massage pump. Thanks to the pump's special design, the noise level is low, which helps keep your neighbors happy when they aren't joining in for a soak.
Heat pump connection
This spa is equipped with a built-in heat pump connector, allowing you to easily connect a heat pump. It features a convenient 50mm connection that lets you connect almost any heat pump, giving you the ability to heat your spa in the most efficient way possible.
Easy to install
Installation service? Forget it! With a little help from a few pairs of strong hands and some technical knowledge, you can easily connect the W'eau spa yourself. The only thing you still need to do is plug it in. After that, just put in the garden hose and fill it up. It shouldn't take longer than an hour. Of course, just make sure you can easily get the spa into your garden. Help from a few strong hands is definitely useful for that.
11 in stock
Ordered before 10:00 PM, shipped today
The W'eau Slat Cleaner has been specially developed to effectively remove limescale and dirt from pool slats and other surfaces. This powerful cleaning formula ensures your pool slats remain clean and shiny, and prevents unnecessary wear and tear. Regular use of this slat cleaner extends the lifespan of your cover and keeps your pool hygienic and fresh.
Simple and effective to use The W'eau Slat Cleaner is easy to use and provides effective results. It is recommended to use the cleaner approximately twice a year for optimal maintenance of your pool slats. The cleaner is suitable for all types of slats and pool covers. Using it is simple: dampen the slats, apply the diluted cleaner, let it soak in, and then rinse thoroughly with a pressure sprayer. After treatment, it is important to restore the pH level of the pool water by backwashing the filter well.
How do you use the W'eau Slat Cleaner?
First, dampen the slats with water.
Dilute the cleaner: use 1 liter of W'eau Slat Cleaner to 3 liters of water per 10 m² and apply with a mist sprayer.
Let the cleaner soak in for 1 to 2 hours to effectively loosen limescale and dirt.
Rinse the slats thoroughly with a pressure sprayer to remove the residue.
Don't forget to backwash the filter and increase the pH level of the pool water after treatment.
Conclusion The W'eau Slat Cleaner is an essential cleaner for pool owners who want to keep their slats clean, shiny, and in good condition. With its powerful formula, it is the perfect solution for removing stubborn limescale and dirt. This cleaner ensures a longer lifespan for your cover and makes maintenance simple and effective.
25 in stock
Ordered before 10:00 PM, shipped today
A leaking pool or spa? Don't panic! With W’eau Leak Sealer, you have a powerful and effective liquid at your fingertips that automatically detects and seals small leaks up to approx. 3 mm – without any demolition or dismantling. Whether it involves a leak in a pipe, fitting, liner, or tiled wall, this smart liquid actively searches for the leak and hardens there within 48 hours.
User-friendly and efficient, suitable for both indoor and outdoor pools and even spas. Add it to the water, let it circulate, and leave the rest to the sealer. This way, you will be back to enjoying a leak-free pool in no time.
⚙️ Instructions for use
PreparationEnsure the water is clean and all filters have been cleaned. Remove active carbon or UV systems if present.
Dosage
For spas: Add 1 ml of Leak Sealer per 60 liters of water.
For swimming pools: Pour the contents directly into the water, preferably via the skimmer or near the suspected leak.
CirculationAllow the system to circulate for 24 hours without the heat pump. Is a heat pump connected? Then temporarily close the bypass to prevent damage.
CuringAfterwards, let the water rest for at least 48 hours so the sealer can cure. Avoid using the pool during this period.
⚠️ Important warnings
Only use when water temperatures are above 6 °C
Do not mix with other chemicals
Keep out of reach of children
Wear protective gear when dosing
With W’eau Leak Sealer, you can resolve small leaks in your pool or spa quickly, safely, and easily – without having to dig, drill, or open up pipes. Add it, let it circulate, and enjoy your pool worry-free again.
The W’eau Maxi pool pump is a robust and reliable pump for swimming pools up to a maximum of 36 m³. This model operates at a fixed speed and offers excellent performance with low resistance. The pump is ideal for pools with a limited distance between the pump and the pool (less than 3 meters) and situations where intensive use of a pool vacuum is not required. Thanks to its quiet operation and energy efficiency, this is a smart choice for pool owners looking for a durable pump.
For which pools?
The W’eau Maxi pool pump is most suitable for pools with a volume of up to 36 m³ with low resistance and up to 32 m³ with medium resistance. The pump functions best in situations where pipe length and height differences are limited. Pools with high resistance, such as long pipes or height differences, should consider a different pump.
Easy to use and maintain
The pump is self-priming, which means it can work trouble-free with shorter distances and small height differences. It features a large filter basket with a transparent lid, making it easy to check when it needs to be emptied. In addition, the pump can be connected to a frequency controller, allowing you to adjust the speed and save energy.With the W’eau Maxi pool pump, you can enjoy a stable and efficient pool pump that helps you keep your pool water clean and clear, with minimal effort and cost!
The W’eau Maxi swimming pool pump 15 m³ is a powerful and efficient pool pump designed to keep your pool water clean and fresh. This standard pump runs at a fixed speed and is suitable for pools with a capacity of up to 56,000 liters. The pump performs best in pools with low resistance, meaning the distance between the pump and the pool should be short (less than 3 meters) and the height differences in the piping should be kept to a minimum. This pump is less suitable for pools with higher resistance. The W’eau Maxi swimming pool pump is a quiet and energy-efficient option, which is ideal for those seeking efficiency and comfort.
For which pools?
The W’eau Maxi swimming pool pump 15 m³ is suitable for both above-ground and in-ground pools with a capacity of up to a maximum of 60,000 liters. This pump is perfect for situations with short piping and low to medium resistance, where the distance between the pool and the pump is small. For pools with high resistance (long distances or significant height differences), the pump offers less than optimal performance.
Functions and features
This swimming pool pump is equipped with various features that contribute to the convenience and efficiency of its operation:
Self-priming: The pump can easily handle short distances and minor height differences, ensuring stable operation.
Frequency controller (optional): The pump is compatible with a frequency controller, which allows you to adjust the speed of the pump, helping to save energy.
Large filter basket: The pump includes a spacious filter basket with a transparent lid, making it easy to check whether the basket needs to be emptied.
Saltwater resistant: This pump is resistant to saltwater, making it suitable for pools that use salt instead of chlorine.
Thermal protection: The pump is equipped with thermal protection, which switches the pump off in the event of excessive temperatures or voltage, ensuring extra safety and a longer service life.
Connection and installation
The W’eau Maxi swimming pool pump 15 m³ is easy to connect with a 50 mm fitting. The set comes with a standard plug, making installation quick and simple. Thanks to its robust construction, this pump is durable and resistant to heavy loads and various weather conditions.
The W’eau Maxi swimming pool pump 18 m³ is a powerful, reliable pool pump perfectly suited for swimming pools with a capacity of up to 72,000 liters. This pump operates at a fixed speed and is designed for installation below the water level, ensuring simple and efficient operation. The W’eau Maxi swimming pool pump is built with high-quality materials, ensuring a long service life and excellent performance. The pump is particularly suitable for pools with low to medium resistance and is equipped with a self-priming function, meaning it can operate effectively even with slight height differences and short distances.
For which pools is the W’eau Maxi suitable?
This pool pump performs best in pools with low to medium resistance. This means the distance between the pump and the pool should be short (less than 3 meters), and the piping should have minimal height differences. The W’eau Maxi pool pump is ideal for pools up to 72,000 liters, and thanks to its large capacity of 18 m³ per hour, the pool water remains consistently clean and fresh.
Maximum pool capacity:
Low resistance: 72,000 liters
Medium resistance: 60,000 liters
High resistance: 36,000 liters
Functions of the W’eau Maxi 18 m³ pool pump
The W’eau Maxi 18 m³ pool pump offers several features that significantly facilitate the maintenance of your pool:
Self-priming: This allows the pump to easily handle short distances and small height differences.
Frequency controller: The pump can be connected to a frequency controller, meaning the pump speed can be easily adjusted to save energy and increase efficiency.
Large filter basket: The pump is equipped with a spacious filter basket, meaning you have to empty it less often. The transparent lid of the filter basket makes it easy to see when it is full and needs emptying.
Thermal protection: The pump is equipped with thermal protection, meaning it shuts off automatically if the voltage or temperature becomes too high.
Saltwater resistant: This pool pump is also suitable for saltwater pools.
Simple installation
The W’eau Maxi pool pump 18 m³ comes with a standard plug and has a 50 mm connection, making it easy to connect. The Plug & Play installation makes it very user-friendly. This pump is ready for immediate use after installation and can be connected to existing piping without much effort.
The W’eau Maxi swimming pool pump 18 m³ is a reliable and efficient choice for your swimming pool, designed to ensure clean and fresh water effortlessly while keeping your energy costs low.
The W’eau Maxi swimming pool pump 8 m³ is a reliable and efficient choice for maintaining smaller swimming pools. This pump is designed for pools up to a maximum of 24,000 liters and offers fixed-speed performance, perfect for pools with low to medium resistance. Thanks to its robust construction and efficient operation, the W’eau Maxi swimming pool pump ensures that the water in your pool remains continuously fresh and clean, without compromising on energy consumption.
For which pools?
The W’eau Maxi 8 m³ swimming pool pump is ideal for pools up to a maximum of 24 m³. The unit is designed for pools with low resistance, which means the pump performs best when the distance between the pool and the pump is short (less than 3 meters) and there are no significant height differences. This makes the pump perfect for compact and well-designed pool installations where resistance is minimal.
Maximum pool volume:
Low resistance: 28 m³
Medium resistance: 24 m³
High resistance: 0 m³
Features of the W’eau Maxi 8 m³ swimming pool pump
The W’eau Maxi 8 m³ offers various features that make pool maintenance simple:
Self-priming: This feature allows the pump to operate efficiently even with small height differences and short distances.
Large filter basket: With the spacious filter basket, you need to empty it less often, and thanks to the transparent lid, you can easily check when the filter basket is full.
Frequency controller: The pump can be connected to a frequency controller to allow the pump to operate at different speeds, which contributes to energy savings and increased efficiency.
Thermal protection: The pump is equipped with thermal protection that automatically shuts off the motor in the event of overheating or excessive voltage load.
Saltwater resistant: Suitable for use in saltwater pools, which further increases the durability and versatility of this pump.
Installation and connection
The W’eau Maxi 8 m³ swimming pool pump comes with a standard 50 mm connection and a plug, making the pump easy to connect. This Plug & Play pump can be used immediately after installation, without any hassle with complex connections or additional equipment.
The W’eau Maxi 8 m³ swimming pool pump is a powerful and energy-efficient solution for filtering and maintaining smaller swimming pools, designed for ease of use and operational efficiency.
13 in stock
Ordered before 10:00 PM, shipped today
With W'eau Metal Clean, you prevent deposits of iron, copper, and other minerals in your spa. Use W'eau Metal Clean with every spa water change to neutralize minerals and prevent staining. The product reacts with any metal contamination before it has a chance to form unsightly stains.
Instructions for use W'eau Metal Clean
Turn off the filter system
Add 250 ml of W'eau Metal Clean to the water (per tub) and distribute evenly
Turn on the filter system and let it run for at least 30 minutes
Safety instructions W'eau Metal Clean
Never add the product while people are in the spa. Always use gloves. Keep the product out of the reach of children and store it in a closed container in a well-ventilated area. Always read the safety instructions on the packaging.
Features W'eau Metal Clean
Liquid form
Content: 500 ml
20 in stock
Ordered before 10:00 PM, shipped today
With W'eau Metal Clean, you prevent the buildup of iron, copper, and other minerals in your spa. Use W'eau Metal Clean every time you refresh your spa water to neutralize minerals and prevent staining. The product reacts with any metal contamination before it has the chance to form unsightly marks.
Instructions for W'eau Metal Clean
Turn off the filter system
Add 250 ml of W'eau Metal Clean (per tub) to the water and distribute evenly
Turn on the filter system and let it run for at least 30 minutes
Safety instructions for W'eau Metal Clean
Never add the product while people are in the spa. Always wear gloves. Keep the product out of reach of children and store it in a closed container in a well-ventilated area. Always read the safety instructions on the packaging.
Features of W'eau Metal Clean
Liquid form
Content: 500 ml
30 in stock
Ordered before 10:00 PM, shipped today
W’eau Metal Net is a powerful liquid product specially developed to effectively remove iron, lime, and other metals such as rust from pool water. It is ideal for swimming pools filled with groundwater, where an increased concentration of metals often occurs. By using Metal Net, you prevent discoloration of the pool water and keep the water clear and inviting. The product can be used both when first filling the pool and preventively throughout the season.
The W’eau MFV-17 variable sand filter set is an innovative solution for pool maintenance. This filter set is equipped with a variable speed pool pump, meaning you can easily adjust the speed of the pump to the needs of your pool. This ensures that the pump only runs at full power when necessary, which saves energy and results in lower costs. With a maximum capacity of 8 m³ per hour, the VPP-450 is perfectly suited for swimming pools up to 36,000 liters, effectively removing all dirt particles for clean and clear water.
The 6-way valve makes it easy to switch between different functions, such as filtering, backwashing, and rinsing. The filter vessel is made of sturdy polyethylene (PE) reinforced with polyester, making it resistant to high pressure and intensive use. This sand filter set comes with a self-priming pump, which means the pump automatically draws in water for optimal operation. The VPP-450 is ideal for both above-ground and built-in pools and is delivered Plug & Play, complete with plug and coupling for easy installation.
Saving costs with a variable pump
The W’eau MFV-17 uses a variable speed pool pump, allowing you to adjust the pump speed yourself. This ensures that the pump only operates at full power when truly necessary, which saves energy and reduces operating costs. The pump consumes less power and provides efficient filtration of the pool water.
Functions of the 6-way valve:
Filter: Water flows from top to bottom through the sand bed, removing dirt and impurities.
Backwash: Clean the sand bed by reversing the water flow to remove accumulated dirt.
Rinse: Flush out dirty water after backwashing, so the filter is ready for use.
Close: Closes all inlets and outlets when the filter is not in use.
Waste: Drains pool water directly into the sewer, for example to lower the water level.
Recirculate: Allows water to circulate without passing through the filter, ideal for chemical treatments such as algae control.
Summary:
The W’eau MFV-17 variable sand filter set offers a smart and energy-efficient solution for maintaining your pool. With its variable pump, generous capacity, and convenient 6-way valve, this set ensures efficient cleaning for pools up to 36,000 liters. This set is easy to install and ideal for intensive use in both above-ground and built-in swimming pools.
With the W'eau MFV-17 Variable Sand Filter Set 8 m³/h + Full Inverter 13.5 kW – Up to 36 m³, you choose a complete and professionally curated technical package that allows you to efficiently filter and energy-efficiently heat your swimming pool. This complete installation is specifically designed for swimming pools up to 36,000 liters and includes all essential components for reliable, durable, and easy-to-install pool technology.
The foundation of this technical set is the W'eau MFV-17 variable sand filter set with a design flow rate of 8 m³/h. Thanks to the variable pool pump, the system always operates at the most efficient speed. This allows you to save significantly on energy costs while the pool water remains continuously clear and clean. The powerful self-priming pump is suitable for both above-ground and built-in pools and performs excellently, even in installations with higher resistance. The sand filter features a durable 6-way valve that allows you to easily filter, backwash, rinse, circulate, drain, and close.
For a pleasant water temperature, this technical set is equipped with the W'eau Full Inverter 13.5 kW swimming pool heat pump. Thanks to Full Inverter technology, the heat pump automatically adjusts its compressor and fan speed to the heat demand of the pool. As a result, the pool heats up faster, the temperature remains stable, and energy consumption is significantly reduced compared to traditional on/off heat pumps.
To complete the installation, this technical set comes with a Deluxe Bypass Kit, 12 meters of 50 mm PVC flexible hose, and sufficient filter glass for the sand filter. With the bypass, you can easily regulate the ideal water flow through the heat pump, ensuring it always performs optimally. Furthermore, the filter glass provides finer filtration than traditional filter sand, capturing dirt particles more effectively and keeping the pool water crystal clear for longer.
All components are carefully matched, so you do not have to search for individual parts yourself. You receive one complete package that allows you to get started immediately. This makes the installation simpler, more reliable, and often more cost-effective than purchasing all components separately.
This complete technical set is ideal for both above-ground and inground pools up to 36 m³ and offers years of reliable performance, low energy consumption, and optimal swimming comfort.
Package contents
W'eau MFV-20 Variable Sand Filter Set – 8 m³/h
W'eau Full Inverter swimming pool heat pump – 13.5 kW
Loose cable with plug (from 0.75 kW)
W'eau Full Inverter heat pump protective cover
W’eau vibration dampers for heat pumps
Bypass kit for heat pump basic
W’eau Heater Cleaner heat pump cleaner
PVC Flexible hose 50 mm – 12 meters
2 × Filter glass fine – 20 kg
The W’eau MFV-20 variable sand filter set is an advanced solution for pool maintenance, designed to be both efficient and energy-saving. This filter set is equipped with a variable pool pump, allowing you to easily adjust the pump speed to suit your pool's needs. This means the pump only performs optimally when necessary, which significantly reduces energy consumption and costs. The VPP-500 offers a maximum capacity of 12 m³ per hour, making it ideal for pools up to 48,000 liters. This powerful system effortlessly removes dirt particles from the water, ensuring a fresh and clean pool.
The sand filter set is equipped with a 6-way valve, which allows you to switch between different functions, such as filtering, backwashing, and rinsing. The filter tank is made of sturdy polyester-reinforced polyethylene (PE), making it resistant to high pressure and demanding conditions. The VPP-500 is fully self-priming, making it suitable for heavier applications and effortless to set up thanks to its Plug & Play design.
Cost savings thanks to the variable pool pump
The W’eau MFV-20 distinguishes itself through its variable pool pump, allowing you to optimize energy consumption. By adjusting the pump to the required capacity, unnecessary energy use is avoided and you save significantly on energy costs.
6-way valve functions:
Filter: Water flows from top to bottom through the sand bed, removing dirt and impurities.
Backwash: The sand bed is rinsed in the opposite direction to remove accumulated dirt.
Rinse: Flushes away dirty water after backwashing to prepare the filter for reuse.
Close: Closes all filter inlets and outlets when not in use.
Waste: Drains pool water directly into the sewer.
Circulate: Allows water to circulate without passing through the filter, ideal for chemical treatments such as algae control.
Summary:
The W’eau MFV-20 variable sand filter set offers an advanced and energy-efficient solution for pools up to 48,000 liters. With its variable pump, generous capacity, and efficient filtration via the 6-way valve, this set is ideal for intensive use in both above-ground and built-in pools. Thanks to the Plug & Play design, installation is simple, allowing you to quickly enjoy clean and clear pool water.
With the W'eau MFV-20 Variable Sand Filter Set 12 m³/h + Full Inverter 17.5 kW – Up to 48 m³, you are choosing a complete and professionally assembled technical package that optimally filters and efficiently heats your pool. This complete installation has been specially designed for swimming pools of up to 48,000 liters and contains only high-quality components that are perfectly matched to one another.
The foundation of this technical set is the W'eau MFV-20 variable sand filter set with a maximum pump capacity of 12 m³/h. Thanks to the energy-efficient variable pool pump, the system always runs at the ideal speed. This means you consume significantly less power than with a traditional pool pump, while the pool water remains continuously clear and clean. The robust sand filter features a durable polyester-reinforced filter vessel and a 6-way valve with all necessary filter functions for easy maintenance and optimal performance. The set is also supplied Plug & Play with connection material for 50, 38, and 32 mm connections.
For a pleasant water temperature, this technical set is equipped with the W'eau Full Inverter 17.5 kW pool heat pump. Thanks to Full Inverter technology, the heat pump automatically adjusts its output based on the pool's heating demand. As a result, the pool is heated more quickly, the temperature remains stable, and energy consumption is significantly lower than with traditional on/off heat pumps.
To complete the installation, this technical set comes with a Bypass Kit, PVC Flex Hose 50 mm, and sufficient filter glass for the sand filter. With the bypass kit, you can easily regulate the ideal water flow through the heat pump, ensuring it always operates at maximum efficiency. The included filter glass provides finer filtration than traditional filter sand, capturing dirt particles more effectively and keeping the pool water crystal clear for longer.
Because all parts are perfectly matched in advance, you do not need to search for individual components yourself. You receive one complete package that allows you to get started immediately. This makes the installation simpler, more reliable, and often more cost-effective than purchasing all the parts separately.
This complete technical set is suitable for both above-ground and inground pools up to 48 m³ and offers years of reliable performance, low energy consumption, and maximum swimming comfort.
Package contents
W'eau MFV-20 Variable Sand Filter Set – 12 m³/h
W'eau Full Inverter pool heat pump – 17.5 kW
Loose cable with plug (from 0.75 kW)
W'eau Full Inverter heat pump protective cover 89 x 42 x 57 cm
W’eau vibration dampers for heat pumps
Bypass kit for basic heat pump
W’eau Heater Cleaner heat pump cleaner
PVC Flex Hose 50 mm – 12 meters
4 × Filter glass fine – 20 kg
This W’eau MFV-24 variable sand filter set is a true breakthrough in pool maintenance. It is the first sand filter set to use a variable speed pool pump. This saves you money and keeps your pool water wonderfully clean! In addition, the sand filter set features all the functions you need thanks to the 6-way valve. Due to its extremely robust material, this fully self-priming sand filter set is suitable for heavier applications. With a capacity of 16 m3 per hour and a maximum content of 85 kg, it removes all dirt from pools up to 64,000 litres. So, go ahead and splash around in a clean pool!Save money with a variable pool pumpWhat makes the W’eau VPP-650 so unique? Sand filter sets from the W’eau VPP series are the first sets on the market to use a variable speed pool pump. This allows you to easily set the speed of the pump, so the W’eau VPP-650 variable sand filter set only performs optimally when it really needs to. As a result, the sand filter set does not consume unnecessary energy. This means lower energy costs for you, keeping more money in your pocket!Use and connection of the sand filter setThere are a few important features you should be aware of when purchasing a W’eau MFV-24 variable sand filter set. The sand filter set is supplied Plug & Play, including a plug and coupling. This makes the set very easy to connect and ready for immediate use. The connection of the sand filter set is 50 mm. You may need additional adapters to make the connection fit your piping. When connecting the W’eau MFV-24, always keep in mind that placing it above the water line provides the best results.
With the W'eau MFV-24 Variable Sand Filter Set 16 m³/h + Full Inverter 21 kW – Up to 64 m³, you are choosing a complete and professionally assembled technical package for swimming pools up to 64,000 liters. This high-quality set combines an energy-efficient variable sand filter system with a powerful Full Inverter heat pump, including all necessary materials for a quick and professional installation. This allows you to enjoy crystal clear and wonderfully heated pool water throughout the entire swimming season.
The foundation of this technical set is the W'eau MFV-24 variable sand filter set with a maximum pump capacity of 16 m³/h. Thanks to the variable speed, the pump never runs harder than necessary. This leads to significant energy cost savings, reduces noise levels, and increases the pump's service life. Furthermore, the sand filter features a robust polyester-reinforced filter vessel and a 6-way valve with all necessary filter functions.
For an optimally heated pool, this technical set is equipped with the W'eau Full Inverter 21 kW swimming pool heat pump. Thanks to Full Inverter technology, the heat pump automatically adjusts its output based on the heating demand. As a result, the pool reaches the desired temperature faster, while energy consumption is significantly lower than with traditional heat pumps. The integrated Wi-Fi module allows for smartphone control, and the titanium heat exchanger is suitable for both chlorine and saltwater pools.
To complete the installation, this technical set is supplied with a Deluxe Bypass Kit, 12 meters of PVC flex hose (50 mm), and sufficient filter glass for the sand filter. Thanks to the bypass kit, you can easily regulate the ideal water flow through the heat pump, ensuring it always operates at maximum efficiency. The included filter glass provides finer filtration than traditional filter sand, keeping the pool water clear for longer and requiring less maintenance.
Because all parts are carefully matched, you don't have to search for individual components yourself. You receive a complete technical set that allows you to get started right away. This makes the installation simpler, more reliable, and often more cost-effective than purchasing all parts separately.
This complete technical set is ideal for both large above-ground pools and inground pools up to 64 m³ and offers years of reliable performance, low energy consumption, and maximum swimming comfort.
Package contents
W'eau MFV-24 Variable Sand Filter Set – 16 m³/h
W'eau Full Inverter swimming pool heat pump – 21 kW
Separate cable with plug (from 0.75 kW)
W'eau Full Inverter heat pump protective cover 89 x 42 x 57 cm
W’eau vibration dampers for heat pumps
Bypass kit for basic heat pump
W’eau Heater Cleaner heat pump cleaner
PVC Flex hose 50 mm – 12 meters
6 × Filter glass fine – 20 kg
2 × Filter glass coarse – 20 kg
The W'eau microfiber pool brush is the ideal choice for safely and effectively cleaning pool walls, the waterline, and other sensitive surfaces. Instead of hard bristles, this brush features soft microfiber strands that absorb dirt, dust, grease, and light deposits without leaving scratches. This makes the brush extremely suitable for pools with a liner, polyester shell, tiles, glass mosaic, and pool covers.
The detachable microfiber cover is easy to remove thanks to the Velcro closure and can be rinsed or washed after use. This keeps the brush clean for a long time and ensures it maintains its excellent cleaning performance. Thanks to the universal connection, the brush is easy to attach to almost any standard telescopic pool pole (not included).
The wide microfiber head makes it possible to clean large surfaces quickly, while the soft fibers also effectively clean hard-to-reach areas and the waterline. Ideal for the weekly maintenance of your swimming pool.
26 in stock
Ordered before 10:00 PM, shipped today
Do you want to enjoy pleasant pool water even on less sunny days? With the W’eau Mini Inverter 2.0 Plus pool heat pump – 3 kW, you can easily extend your swimming season. This compact Full Inverter heat pump is specifically designed for smaller swimming pools and combines high efficiency with low energy consumption, quiet operation, and easy controls.
The 3 kW version is suitable for pools up to approximately 9,000 liters during the normal swimming season. If you want to use the heat pump over a longer season from April to October, a pool volume of up to approximately 6,000 liters is recommended. The heat pump can both heat and cool and operates in outdoor temperatures as low as -7°C.
Full Inverter technology
The most important difference between this heat pump and a traditional mini heat pump is the Full Inverter technology.
A traditional on/off heat pump works largely at full power and then switches off once the desired temperature is reached. In contrast, the W’eau Mini Inverter 2.0 Plus can automatically adjust its power output to the actual heat demand.
When the pool needs to be heated significantly, the heat pump delivers more power. Once the water approaches the set temperature, the power is throttled back.
This prevents the heat pump from working harder than necessary, resulting in lower energy consumption, less noise, and more uniform pool heating.
High efficiency with a COP of up to 9.5
The W’eau Mini Inverter 2.0 Plus extracts heat from the outside air and transfers it to the pool water via the heat exchanger. This allows the heat pump to produce a large amount of heat with relatively little electrical energy.
At an outside temperature of 26°C, the 3 kW model has a COP between 5.5 and 9.5. At 15°C, the COP is between 4.4 and 6.0.
A COP of 9.5 means the heat pump can operate very efficiently under favorable conditions. This energy-efficient operation is especially effective once the pool has reached the desired temperature and the inverter can throttle back.
Ideal for smaller pools
With a maximum heating capacity of 3 kW, this model is primarily intended for smaller pools and above-ground pools.
For the normal swimming season, a pool volume of up to approximately 9 m³ is recommended. If you want to heat the pool over a longer season, for example from April to October, a volume of up to approximately 6 m³ is a better guideline.
Actual performance depends on various factors, including outdoor temperature, desired water temperature, wind, pool placement, and the use of a cover.
A good pool cover is highly recommended. Significant heat can be lost through the water surface, especially at night.
Heating and cooling
The W’eau Mini Inverter 2.0 Plus does not just heat; it also features a cooling function.
Heating can be set between 15°C and 40°C. For the cooling function, the setting range is 8°C to 28°C.
This gives you plenty of control over the desired water temperature throughout the swimming season. You can heat the pool during cooler days and cool the water down during exceptionally hot periods.
Built-in Wi-Fi
The W’eau Mini Inverter 2.0 Plus features built-in Wi-Fi, allowing you to operate the heat pump via your smartphone.
You can, for example, adjust the desired water temperature and check settings without having to walk to the heat pump every time.
Of course, the heat pump can also be set directly via the control panel.
Very quiet operation
A major advantage of inverter technology is quiet operation. Because the compressor and fan can adjust their speed, the heat pump does not have to run at maximum power constantly.
The stated noise level is approximately 39 to 45 dB(A) at a distance of 1 meter. At a distance of 10 meters, this is around 24 to 30 dB(A), depending on the current power output.
This makes the W’eau Mini Inverter 2.0 Plus highly suitable for placement near a pool or patio.
Do you want to further reduce the transmission of vibrations to tiles, concrete, or a wooden surface? Combine the heat pump with W’eau anti-vibration mounts for mini heat pumps.
Suitable for saltwater pools
The heat exchanger of the W’eau Mini Inverter 2.0 Plus is made of titanium.
This makes the heat pump suitable for pools that use a saltwater system or salt electrolysis.
You can therefore use the model with both traditionally treated pool water and saltwater pools, provided that water quality values are correctly maintained.
Practical 32/38 mm connections
The heat pump features 32/38 mm water connections, making it a good fit for the pool hoses commonly used with smaller above-ground pools.
The heat pump is connected after the filtration system. Filtered pool water flows through the heat exchanger, is heated, and then flows back to the pool.
With a more powerful filter pump, a bypass can be used to precisely adjust the amount of water flowing through the heat pump.
Operates on standard 230V
You do not need heavy-duty power for this compact heat pump. The W’eau Mini Inverter 2.0 Plus 3 kW operates on 220-240V / 1 phase / 50 Hz.
The maximum power input is approximately 0.80 kW and the maximum current is approximately 4.1 amperes.
This makes this mini heat pump particularly suitable for private swimming pool installations.
Automatic flow switch
The built-in flow switch monitors water flow through the heat pump.
When the filter pump is running and sufficient water is flowing through the heat pump, the unit can function normally. When water circulation stops or is insufficient, the heat pump detects this.
This ensures extra ease of use and protection of the installation.
Works from -7°C outdoor temperature
The W’eau Mini Inverter 2.0 Plus has a specified operating range of -7°C to 43°C.
This allows the heat pump to be used during cooler periods, significantly extending the swimming season.
Keep in mind that a heat pump has less heating capacity and lower efficiency at very low outside temperatures than during warm summer days. For use in early and late season, good pool insulation and a cover are therefore extra important.
Compact size
The W’eau Mini Inverter 2.0 Plus has a compact design, making it easy to place near smaller pool installations.
With dimensions of approximately 42 x 36 x 49 cm, the heat pump takes up relatively little space. It weighs approximately 27 kg.
Despite its compact size, sufficient free space must be kept around the heat pump. The air intake and air outlet must not be blocked, as proper air circulation is necessary for optimal efficiency.
Enjoy deliciously warm swimming pool water for longer with the W’eau Mini Inverter 2.0 Plus swimming pool heat pump – 4.5 kW. This compact Full Inverter heat pump is specially developed for small to medium-sized pools and combines powerful performance with low energy consumption, quiet operation, and great ease of use.
With a heating capacity of up to 4.5 kW, this model is a great middle ground within the Mini Inverter 2.0 Plus series. The heat pump is ideal when you need just a bit more power than the 3 kW model offers, but do not want to place a large swimming pool heat pump next to your pool.
The built-in Full Inverter technology ensures that the compressor and fan automatically adjust their output based on the heat demand. As a result, the heat pump operates efficiently when high power is needed and scales back as soon as the pool is close to the desired temperature.
Full Inverter technology for lower energy consumption
A traditional on/off heat pump mainly operates at maximum power and switches off when the desired water temperature is reached. The W’eau Mini Inverter 2.0 Plus operates more intelligently.
When the pool water still needs significant heating, the heat pump can use a large portion of its available power. As the water gets closer to the set temperature, the inverter automatically lowers the speed.
This results in more even heating and has two major advantages: lower energy consumption and less noise.
Especially once the pool is up to temperature, the heat pump can continue to run at a lower capacity for long periods to maintain the temperature efficiently.
Heating capacity of 4.5 kW
Under favorable conditions, the W’eau Mini Inverter 2.0 Plus provides a heating capacity of 1.2 to 4.5 kW. At an outside temperature of 15°C, the heating capacity is approximately 0.84 to 3.2 kW.
This makes the 4.5 kW version suitable for small to medium-sized swimming pools.
For the normal swimming season from approximately May to August, we recommend this model for pools up to approximately 12 m³. If you wish to use the heat pump during the longer season from April to October, a pool of up to approximately 9 m³ is a better guideline.
Actual performance always depends on factors including outside temperature, wind, desired water temperature, pool location, and the use of a good pool cover.
Highly energy-efficient with a COP of up to 10
The W’eau Mini Inverter 2.0 Plus extracts the majority of its heat from the outside air. As a result, it can deliver significantly more heat to the pool water than it consumes in electricity.
Under favorable conditions, the COP can reach up to 10.
This means that under optimal conditions, the heat pump can produce up to approximately 10 kW of heat for every 1 kW of electrical energy used.
At an outside temperature of 26°C, the COP is between approximately 5.5 and 10. At an outside temperature of 15°C, it is between approximately 4.4 and 6.0.
This makes the Mini Inverter 2.0 Plus an attractive solution if you want to heat your pool regularly without using a traditional electric pool heater.
Heating and cooling
The W’eau Mini Inverter 2.0 Plus can not only heat, but also actively cool.
For heating, the desired water temperature can be set between 15°C and 40°C. In cooling mode, the setting range is between 8°C and 28°C.
During spring and autumn, you use the heat pump to keep the pool pleasantly warm. If the pool becomes too warm during a hot summer period, you can use the cooling mode to lower the water temperature.
Built-in Wi-Fi
With the integrated Wi-Fi module, you can easily control the W’eau Mini Inverter 2.0 Plus via your smartphone.
This allows you to, for example, adjust the desired water temperature or manage the heat pump settings without having to walk to the device every time.
Would you prefer to control the heat pump directly? You can of course do that via the control panel on the unit itself.
Quiet operation
A heat pump is often placed close to the pool, terrace, or house. A low noise level is therefore important.
The Full Inverter technology helps with this. As soon as less heating power is required, the compressor and fan can operate at a lower speed.
The noise level of the 4.5 kW version is around 40 to 46 dB(A) at a distance of 1 meter. At a distance of 10 meters, this is approximately 25 to 31 dB(A).
This allows the Mini Inverter 2.0 Plus to combine significant heating power with relatively quiet operation.
Automatic flow switch
The built-in flow switch checks whether enough pool water is flowing through the heat pump.
When the filter pump is switched on and there is sufficient water circulation, the heat pump can operate automatically. If the water circulation stops, the system detects this.
This makes the heat pump particularly user-friendly and ensures that the heat pump's operation can easily be combined with the pool's filter system.
Titanium heat exchanger
The W’eau Mini Inverter 2.0 Plus features a titanium heat exchanger. The pool water flows through this heat exchanger and absorbs the heat from the heat pump.
Titanium is highly resistant to pool water and also makes this heat pump suitable for pools that use a saltwater system or salt electrolysis.
This allows you to use the Mini Inverter 2.0 Plus with both traditionally treated pool water and saltwater pools.
Handy 32/38 mm connections
The heat pump is equipped with 32/38 mm connections. These are common hose sizes for above-ground pools and compact pool installations.
This makes it easy to incorporate the heat pump into an existing installation.
The heat pump is placed after the filter installation. The filtered pool water flows through the heat exchanger, is heated, and then returns to the pool.
For filter pumps with a high water flow rate, we recommend using a bypass. This allows you to precisely regulate how much water is directed through the heat pump.
Minimum 2 m³ per hour water flow
For proper operation, the 4.5 kW version requires a water flow of approximately 2 m³ per hour.
It is therefore important that the pool pump being used has sufficient capacity.
Insufficient water flow can cause the heat pump to malfunction. With a very powerful filter pump, the flow can be regulated using a bypass.
No heavy-duty power required
Despite the heating capacity of 4.5 kW, you do not need 380V heavy-duty power for this heat pump.
The W’eau Mini Inverter 2.0 Plus operates on 220-240V / 1 phase / 50 Hz and can therefore be connected to a 230V outlet within a suitable electrical installation.
The maximum electrical power consumption is approximately 1.20 kW and the maximum current is approximately 6.2 amperes.
Operates down to -7°C outside temperature
The W’eau Mini Inverter 2.0 Plus has a wide operating temperature range of approximately -7°C to 43°C.
This allows the heat pump to function even at relatively low outside temperatures, making it suitable for significantly extending the swimming season.
Please keep in mind that an air/water heat pump remains dependent on the outside temperature. At 25°C outside air, it can heat more efficiently and powerfully than when it is, for example, 10°C outside.
For use in early and late season, it is therefore extra important to cover the pool well at night.
Ideal in combination with a pool cover
A good heat pump is only one part of an energy-efficient pool installation. A large portion of heat loss occurs via the water surface.
Always use a suitable cover when not swimming.
This keeps the accumulated heat in the pool longer and means the W’eau Mini Inverter needs to run at high power less often. This not only results in lower energy consumption but also helps to get the pool up to temperature faster and keep it there.
Compact size
Despite its heating capacity, the W’eau Mini Inverter 2.0 Plus is a compact heat pump. This makes it particularly suitable for above-ground pools and gardens where you do not want to place a large heat pump installation.
The compact construction makes it easier to find a suitable spot next to the pool installation.
When placing it, always ensure there is sufficient free space around the heat pump. Both the air intake and the horizontal air outlet must remain completely unobstructed.
Smart choice for pools up to approximately 12,000 liters
The W’eau Mini Inverter 2.0 Plus swimming pool heat pump – 4.5 kW is an excellent choice if you want to heat a compact pool in an energy-efficient way while benefiting from modern inverter technology.
With a recommended pool volume of up to approximately 12,000 liters during the normal swimming season, this 4.5 kW version is a great middle ground between the smaller 3 kW version and the more powerful models in the series.
Thanks to the combination of Full Inverter technology, Wi-Fi, a COP of up to 10, a titanium heat exchanger, heating and cooling modes, and a standard 230V connection, you are getting a complete and user-friendly swimming pool heat pump.
This way, you no longer have to wait for those few truly hot summer days, but can enjoy comfortably heated pool water for a much larger part of the swimming season.
Do you want to enjoy pleasantly warm swimming pool water for longer without placing a large heat pump next to the pool? The W’eau Mini Inverter 2.0 Plus swimming pool heat pump – 6 kW is the most powerful model in the Mini Inverter 2.0 Plus series. This compact pool heat pump combines a heating capacity of up to 6 kW with Full Inverter technology, Wi-Fi control, and high efficiency.
The 6 kW version is particularly suitable for small to medium-sized swimming pools. For the normal swimming season from May to August, a pool volume of up to approximately 18 m³ is recommended. If you want to use the heat pump during a longer season from April to October, we recommend a pool of up to approximately 12 m³.
Thanks to inverter technology, the heat pump automatically adjusts its power to the current heat demand. As a result, it does not need to run at maximum power continuously. This ensures lower energy consumption, less noise, and a more uniform water temperature.
Most powerful Mini Inverter 2.0 Plus
With a maximum of 6 kW heating capacity, this model is the most powerful version in the compact W’eau Mini Inverter 2.0 Plus series.
At an outside temperature of 26°C, the heating capacity can vary from approximately 1.5 to 6.0 kW. At an outside temperature of 15°C, the heating capacity is approximately 1.0 to 4.3 kW.
As a result, the 6 kW version offers significantly more capacity than the smaller models and is ideal if you have a larger pool or simply want some extra heating reserve.
Full Inverter technology
The Full Inverter technology ensures that the heat pump does not have to operate at full power continuously.
When the pool needs to be heated up significantly, the heat pump can utilize its full capacity. As soon as the set water temperature is approached, the heat pump automatically reduces the speed of the compressor and fan.
This ensures that exactly the power needed at that moment is used.
The result is efficient operation, fewer fluctuations in water temperature, and a lower noise level when the heat pump runs at partial load.
High efficiency with a COP of up to 9.4
The W’eau Mini Inverter 2.0 Plus extracts the majority of the required heat from the outside air. This allows the heat pump to deliver more heat to the pool water than it consumes in electrical energy.
At an outside temperature of 26°C, the COP can rise up to 9.4. At an outside temperature of 15°C, the COP is between approximately 4.4 and 6.0.
A COP of 9.4 means that under favorable conditions, the heat pump can deliver up to approximately 9.4 kW of heat for every kW of electrical energy used.
Especially when the pool is up to temperature and the inverter can reduce power, the heat pump can operate very efficiently.
Ideal for pools up to approx. 18,000 liters
For the normal swimming season from approximately May to August, we recommend the 6 kW version for pools up to approximately 18,000 liters.
Do you want to extend the swimming season from April to October? Then we recommend a pool volume of up to approximately 12,000 liters.
Under ideal conditions, the heat pump can be used for pools up to approximately 24 m³, but for a comfortable and realistic heating performance, we always advise taking the season and conditions into account.
The final performance is influenced by, among other things:
Outside temperature
Desired water temperature
Wind
Location of the pool
Nighttime temperatures
Pool insulation
Use of a pool cover
A good cover is therefore strongly recommended.
Heating and cooling
The W’eau Mini Inverter 2.0 Plus features both a heating and cooling function.
During cooler days, you can heat the pool to a comfortable temperature. If the water becomes warmer than desired during a hot summer, the heat pump can also be used to lower the water temperature.
For heating, the temperature is adjustable between approximately 15°C and 40°C. In cooling mode, a temperature between approximately 8°C and 28°C can be set.
This gives you control over the temperature of your pool water throughout the entire swimming season.
Built-in Wi-Fi
The W’eau Mini Inverter 2.0 Plus 6 kW comes standard with integrated Wi-Fi.
This allows you to operate the heat pump via your smartphone. For example, you can easily adjust the desired water temperature without having to walk to the heat pump.
Of course, the heat pump can also be set directly via the control panel.
Silent operation
Despite its heating capacity, the 6 kW version remains relatively quiet.
Because the compressor and fan do not run at maximum power continuously thanks to the inverter technology, the noise level can be significantly reduced as soon as less heat is needed.
The stated noise level is approximately 41 to 47 dB(A) at a distance of 1 meter and approximately 26 to 32 dB(A) at a distance of 10 meters.
For even less transmission of vibrations to tiles, concrete, or other hard surfaces, you can combine the heat pump with W’eau vibration dampers for mini heat pumps.
Titanium heat exchanger
The W’eau Mini Inverter 2.0 Plus features a titanium heat exchanger.
The filtered pool water is passed through this heat exchanger, where it absorbs heat from the heat pump.
Titanium is highly resistant to pool water and also makes the heat pump suitable for use in combination with a saltwater system.
As a result, this heat pump can be used with both traditionally treated pool water and pools with salt electrolysis.
Handy 32/38 mm connections
The heat pump is equipped with 32/38 mm connections. This makes it particularly suitable for many above-ground pools and compact pool installations.
The heat pump is placed after the filter system. The water is filtered first, then flows through the heat pump, and is then returned to the pool heated.
For a powerful filter pump, we recommend using a bypass kit. This allows you to precisely regulate how much water flows through the heat exchanger.
Water flow
For proper operation, the heat pump requires sufficient water circulation. For the 6 kW model, a water flow rate of approximately 2.5 m³ per hour is specified.
In practice, some applications require a higher flow rate, depending on the installation used.
The built-in flow switch monitors whether there is sufficient water circulation. This allows the heat pump to detect when the filter pump is running and when the water flow stops.
Just on 230V
The W’eau Mini Inverter 2.0 Plus 6 kW does not require three-phase power.
The heat pump operates on 220-240V / 1 phase / 50 Hz. The maximum power consumption is approximately 1.60 kW and the maximum current is approximately 7.5 amperes.
This model combines a heating capacity of up to 6 kW with the convenience of a regular 230V installation.
Works down to -7°C outside temperature
The W’eau Mini Inverter 2.0 Plus has a wide operating temperature range of approximately -7°C to 43°C.
This allows you to use the heat pump not only during warm summer days but also during colder periods in the early and late season.
Keep in mind that the capacity of every air-source heat pump depends on the outside temperature. At lower outside temperatures, less heat is available from the outside air, and efficiency decreases.
Therefore, for use in April, September, and October, it is extra important to cover the pool well.
Automatic defrost function
When used at low outside temperatures, ice can form on the evaporator. The W’eau Mini Inverter 2.0 Plus therefore features an automatic defrost function via a 4-way valve.
This allows the heat pump to defrost itself if necessary and then resume the heating process.
This is especially important if you want to use the heat pump during colder periods of the swimming season.
Compact size, powerful performance
The strength of the W’eau Mini Inverter 2.0 Plus lies not only in its performance but also in its compact design.
With a size of approximately 47 x 43 x 51 cm, the heat pump takes up relatively little space. This makes it ideal if you are looking for a powerful heat pump without placing a large device next to the pool.
Always ensure sufficient free space around the heat pump during installation. The air intake and horizontal air outlet must not be blocked.
Powerful mini heat pump for a longer swimming season
The W’eau Mini Inverter 2.0 Plus swimming pool heat pump – 6 kW is an excellent choice if you are looking for a powerful yet compact heat pump.
With a recommended pool volume of up to approximately 18,000 liters during the normal swimming season and approx. 12,000 liters for a longer season, the 6 kW version offers significantly more possibilities than the smaller Mini Inverter models.
Thanks to the combination of Full Inverter technology, a COP up to 9.4, built-in Wi-Fi, titanium heat exchanger, heating and cooling function, automatic flow switch, and 230V connection, you get a remarkably complete pool heat pump.
This makes it easy to extend the swimming season and enjoy comfortably heated pool water, even when the Dutch or Belgian summer isn't cooperating.
10 in stock
Ordered before 10:00 PM, shipped today
Do you want to enjoy your above-ground pool for longer and in more comfort? The W’eau Mini Power 20 heat pump – 3 kW is the perfect solution for warm swimming days from May to August. With its Plug & Play installation, compact design, and whisper-quiet operation, this heat pump is perfectly suited for pools up to 12,000 liters.
The Mini Power 20 is designed for simplicity: without complex settings, it reliably heats your pool water, even at a low flow rate starting from 2 m³/h. Thanks to the automatic flow switch, it turns itself on when your filter pump is running – you don't have to worry about a thing!
The pump works with standard 32/38 mm connections and is therefore directly compatible with most above-ground pools from brands like Intex, Bestway, and EXIT. Thanks to the robust titanium heat exchanger, it is even resistant to salt water.
14 in stock
Ordered before 10:00 PM, shipped today
If you want to enjoy your above-ground pool for longer, the W’eau Mini Power 5kW heat pump offers the perfect solution. It allows you to heat the pool water and extend the swimming season from May through August. A user-friendly plug & play model that can heat your pool up to 20,000 liters. Moreover, this improved model features a lower noise level and higher efficiency.
Perfect for your above-ground pool
This heat pump is wonderfully simple to use. No complex programs; the heat pump is either on or off. It always operates at the same power level. While less efficient, this makes it an affordable model for above-ground pools. The heat pump has a compact design and takes up very little space. Need to move it? It's very easy to do. Due to the technology used, the heat pump works even with low water flow. This makes it ideal for above-ground pools and suitable for pool pumps with a flow rate starting at 2.5 m³/h.
Convenience thanks to plug & play
You don't need any technical knowledge to connect the heat pump. This heat pump works on the plug & play principle. Simply connect the heat pump to your pool and pump using the included 32 or 38 mm couplings. Then, plug it into the power outlet and the heat pump will begin heating your pool. Unlike many other models, you do not need a bypass kit for this heat pump. The 32/38 mm couplings are the standard sizes for above-ground pools from brands such as Intex, Bestway, and EXIT.
Reliable operation thanks to flow switch
This Mini Power heat pump is incredibly easy to use with an above-ground pool thanks to the built-in flow switch. The heat pump automatically starts (or resumes) operation when the pool pump is switched on. Together with the W’eau Mini Inverter, the W’eau Mini Power is the only mini heater on the market with this flow switch.8721202563309
Efficiency and consumption of the Mini Power 5kW
How much kW of heat does the pump extract from 1 kW of energy?
Temperature
Heat output
15°C
4.18 out of 1
26°C
5.17 out of 1
If you want to enjoy your above-ground pool for longer, the W’eau Mini Power 4kW heat pump is the solution. It allows you to heat the pool water and extend the swimming season from May through August. A user-friendly plug & play model that can heat your pool up to 16,000 liters. Moreover, this improved model features a lower noise level and higher efficiency.
Perfect for your above-ground pool
This heat pump works very simply. No complicated programs; the heat pump is either on or off. It always operates at the same power level. Less efficient, but it makes it an affordable model for an above-ground pool. The heat pump has a compact size and takes up little space. Want to move it? That’s very easy. Due to the technology used, the heat pump works even with a low flow rate. This makes it ideal for above-ground pools, and it is suitable for pool pumps with a flow rate starting from 2 m³/h.
Convenience thanks to plug & play
You don’t need any technical knowledge to connect the heat pump. This heat pump works on a plug & play basis. Connect the heat pump to your pool and pump using the included 32 or 38 mm couplings. Then, plug it into the power outlet and the heat pump will begin heating your pool. Unlike many other models, you do not need a bypass kit for this heat pump. The 32/38 mm couplings are the standard sizes for above-ground pools from brands like Intex, Bestway, and EXIT.
Reliable operation thanks to flow switch
This Mini Power heat pump is incredibly easy to use with an above-ground pool thanks to the built-in flow switch. As a result, the heat pump automatically starts (or resumes) operating when the pool pump turns on. Along with the W’eau Mini Inverter, the W’eau Mini Power is the only mini heater on the market with this flow switch.
Efficiency and consumption Mini Power 4kW
How much kW of heat does the pump generate from 1 kW of energy?
Temperature
Heat output
15°C
4.20 out of 1
26°C
5.20 out of 1
15 in stock
Ordered before 10:00 PM, shipped today
The W’eau Muro stainless steel pool ladder with 3 steps is the perfect choice for in-ground pools with a depth between 100 and 125 cm. Thanks to the durable AISI 304 stainless steel, the ladder is resistant to various weather conditions, while the anti-slip profiles on the steps ensure optimal grip – even with wet feet.Installation is simple: you secure the ladder firmly to the pool edge, and the protective caps on the bottom prevent damage to your pool liner. An ideal combination of comfort, safety, and durability for your pool.
27 in stock
Ordered before 10:00 PM, shipped today
The W’eau Muro stainless steel pool ladder with 3 steps is the perfect choice for in-ground pools with a depth between 100 and 125 cm. Thanks to the durable AISI 316 stainless steel, the ladder is resistant to various weather conditions, while the anti-slip profiles on the steps ensure optimal grip – even with wet feet.
Installation is simple: you secure the ladder firmly to the pool edge, and the protective caps on the bottom prevent damage to your pool liner. An ideal combination of comfort, safety, and durability for your pool.
20 in stock
Ordered before 10:00 PM, shipped today
The W’eau Muro stainless steel pool ladder with 4 steps is the perfect choice for in-ground pools with a depth between 125 and 155 cm. Thanks to the durable AISI 304 stainless steel, the ladder is resistant to various weather conditions, while the anti-slip profiles on the steps ensure optimal grip – even with wet feet.Installation is simple: you secure the ladder firmly to the pool edge, and the protective caps on the bottom prevent damage to your pool liner. An ideal combination of comfort, safety, and durability for your pool.
The W’eau Muro stainless steel pool ladder with 4 steps is the perfect choice for in-ground pools with a depth between 125 and 155 cm. Thanks to the durable AISI 316 stainless steel, the ladder is resistant to various weather conditions, while the anti-slip profiles on the steps ensure optimal grip – even with wet feet.
Installation is simple: you secure the ladder firmly to the pool edge, and the protective caps on the bottom prevent damage to your pool liner. An ideal combination of comfort, safety, and durability for your pool.
75 in stock
Ordered before 10:00 PM, shipped today
Protect the base of your pool with these floor tiles. The set consists of 8 floor tiles, each with a length and width of 50 cm and a thickness of 0.4 cm. This provides enough tiles for 1.9 m². It is slightly less than 2 m² because the tiles have to be interlocked. A base of pool tiles provides better insulation than a ground sheet. The floor tiles have a puzzle-piece design. This is great, as it makes it very easy to expand the set with multiple packs. In addition, these floor tiles come with a nice finishing edge. This ensures the floor tiles look neat and tidy with no gaps visible.
The number of tile packs you need
How many packs of floor tiles do you need for your pool? We are here to help! In the overview below, you can see exactly how many packs of floor tiles you need for various pool sizes.
Please note! With the recommended number of packs, it is not always possible to create a perfect square or rectangular shape. The recommended number is exactly enough to cover the surface area of your pool. For example: for a round pool of 305 cm, a set of 6 packs is sufficient. You will then have 48 tiles. Would you prefer a perfect square for a sleek look? Then add an extra pack of tiles. Below, we indicate when you need an extra pack to create a proper square or rectangular shape.
Round pool size:
Ø183 cm: 2 packsØ244 cm: 4 packs (+1)Ø300 cm: 6 packs (+1)Ø305 cm: 6 packs (+1)Ø360 cm: 8 packsØ366 cm: 8 packsØ396 cm: 10 packs (+1)
Ø427 cm: 10 packs (+1)Ø450 cm: 12 packs (+1)Ø457 cm: 12 packs (+1)Ø478 cm: 15 packs (+1)Ø488 cm: 15 packs (+1)Ø549 cm: 17 packs (+1)Ø610 cm: 21 packs (+1)
Oval pool size:
305 x 200 cm: 4 packs (+1)427 x 250 cm: 6 packs (+1)488 x 305 cm: 8 packs (+1)503 x 274 cm: 8 packs (+1)
549 x 274 cm: 8 packs (+1)610 x 305 cm: 12 packs (+1)610 x 366 cm: 13 packs (+1)732 x 366 cm: 15 packs (+1)
Rectangular pool size:
220 x 150 cm: 2 packs (+1)221 x 150 cm: 2 packs (+1)259 x 170 cm: 3 packs260 x 160 cm: 3 packs282 x 196 cm: 3 packs300 x 175 cm: 4 packs (+1)300 x 200 cm: 4 packs (+1)300 x 201 cm: 4 packs (+1)400 x 200 cm: 5 packs (+1)400 x 207 cm: 5 packs (+1)400 x 300 cm: 7 packs (+1)
404 x 201 cm: 5 packs (+1)412 x 201 cm: 5 packs (+1)450 x 220 cm: 6 packs (+1)488 x 244 cm: 7 packs (+1)540 x 250 cm: 8 packs (+1)549 x 274 cm: 8 packs (+1)549 x 305 cm: 9 packs (+1)640 x 274 cm: 10 packs732 x 366 cm: 15 packs956 x 488 cm: 25 packs975 x 488 cm: 27 packs (+1)
The W’eau inflatable ice bath is the ultimate tool for athletes and anyone looking to benefit from the health advantages of an ice bath. With a compact size of 80 cm in diameter and 75 cm in height, the bath is ideal for individual users up to 210 cm tall. This bath offers an optimal experience for recovery and relaxation after intense physical exertion, but it is also an excellent choice for those wanting to improve their general health. An ice bath boosts the immune system, improves circulation, promotes metabolism, accelerates muscle recovery, ensures a better night's sleep, and can even improve your mood!
Designed for durability and comfort
The W’eau inflatable ice bath is crafted from five layers of robust material, making it highly puncture-resistant and ensuring the water stays cold for longer, even on warm days. Thanks to the included inflatable lid, the water temperature is maintained for longer, making the experience even more pleasant. Moreover, the interior is UV-resistant, which protects the bath from sunlight and extends its lifespan.
Easy to use and maintain
Weighing only 3.5 kg, the bath is easy to move when empty. Once you have found the perfect spot, you simply need to add water and ice, and you are ready to enjoy. After use, the water can be easily drained thanks to the convenient drain valve and pipe. Its compact size and material make cleaning simple and efficient.
Complete with accessories for an optimal experience
This ice bath comes with a number of useful accessories, including an inflatable lid, cushion, dust cover, storage bag, support rod, rubber ring, and a hand pump for easy inflation. Thanks to the drain valve and drain pipe, the bath can be emptied quickly, making it immediately ready for cleaning and storage.
26 in stock
Ordered before 10:00 PM, shipped today
The W’eau Opti pool pump 14 m³ is an excellent choice for anyone looking for a powerful yet affordable pool pump. This pump runs at a fixed speed and is designed for installation below the water level, making it perfect for built-in pools. For above-ground pools, the W’eau Opti is an ideal solution, especially for pools with low resistance. This pump performs best when the distance between the pool and the pump is limited to less than 3 meters. Thanks to its quiet operation and energy-efficient performance, the W’eau Opti offers a reliable solution for circulating and filtering pool water.
Which pools is the W’eau Opti suitable for?
The W’eau Opti pool pump is designed for pools with a maximum capacity of 44 m³ at medium resistance and up to 56 m³ at low resistance. This means the pump performs optimally in pools with short piping and minimal height differences. For pools with high resistance (large height differences and long piping distances), this pump is less suitable, but it will work excellently for most above-ground and built-in pools.
Maximum pool capacity:
Low resistance: 56 m³
Medium resistance: 44 m³
High resistance: 8 m³
Features of the W’eau Opti pool pump
The W’eau Opti is a self-priming pump that can handle short distances and small height differences. Thanks to its convenient features, this pump offers both efficiency and ease of use:
Frequency controller: The pump can be connected to a frequency controller, allowing the pump speed to be adjusted as desired to save energy.
Filter basket: The pump features a filter basket that catches debris and prevents it from ending up in the pool water. The basket is easy to check thanks to a transparent lid, though it needs to be emptied slightly more often than with larger models.
Thermal protection: The pump is equipped with thermal protection, meaning it shuts off automatically if the temperature or voltage becomes too high, preventing overload.
Saltwater resistant: This pump is suitable for use in saltwater pools, meaning it is resistant to the corrosive effects of salt water.
Simple installation and connection
The W’eau Opti 14 m³ pool pump is easy to install and comes with a standard plug, so you do not need to make any extra modifications. The pump is equipped with a 50 mm connection, which is compatible with most pool piping. This makes installation quick and easy, so you can soon enjoy clean pool water.
The W’eau Opti pool pump 14 m³ is an affordable and reliable solution for medium-sized pools, with quiet operation, energy efficiency, and easy maintenance as its major strengths.
The W’eau Opti pool pump 16 m³ is an excellent and affordable option for keeping your swimming pool clean. This standard pool pump operates at a fixed speed and is designed to be placed below the water level, making it an ideal choice for both above-ground and built-in pools. With a capacity of 16 m³ per hour, the W’eau Opti pool pump is very suitable for pools up to 64 m³. The pump works best at low resistance, which means the distance between the pool and the pump should be small (less than 3 meters). In addition, the pump is recommended for pools that do not require intensive vacuuming. Thanks to its quiet operation and energy-efficient nature, the W’eau Opti is an excellent solution for efficient pool maintenance.
For which pools is the W’eau Opti suitable?
The W’eau Opti pool pump 16 m³ is suitable for pools up to 64 m³ at low resistance, and up to 56 m³ at medium resistance. For pools with high resistance, such as those with long pipes or large height differences, the pump is less suitable. However, for smaller and medium-sized above-ground and built-in pools, this pump is an ideal solution.
Maximum pool volume:
Low resistance: 64 m³
Medium resistance: 56 m³
High resistance: 20 m³
Key features and benefits:
The W’eau Opti pool pump is equipped with several useful features that facilitate pool maintenance and increase efficiency:
Frequency controller: The pump can be connected to a frequency controller, allowing you to adjust the speed and ensure the pump performs optimally without unnecessary energy consumption.
Thermal protection: The built-in thermal protection ensures that the pump automatically shuts off if the temperature or voltage becomes too high, which extends the lifespan of the pump and guarantees safety.
Saltwater resistant: Suitable for saltwater pools, ensuring the pump can withstand the corrosive effects of salt water.
Filter basket with transparent lid: The pump features a filter basket that catches debris, with a transparent lid so you can easily see when the basket needs to be emptied.
Connecting the pool pump
The W’eau Opti 16 m³ pool pump is easy to install and comes with a plug, so you don’t need to make any extra connections. The pump has a standard 50 mm connection, which is compatible with most pool pipes. This makes installation quick and easy, allowing you to enjoy clean pool water in no time at all.The W’eau Opti pool pump 16 m³ offers an excellent balance between performance, efficiency, and affordability. With its quiet operation, energy-efficient motor, and simple installation, it is an ideal choice for pool owners looking for reliable and durable pool maintenance solutions.
The W’eau Opti 6m³ pool pump is an excellent and affordable choice for small to medium-sized above-ground pools. This fixed-speed pool pump provides reliable and efficient operation, ideal for pools up to 16 m³. The pump is designed for low-resistance situations, meaning the distance between the pump and the pool should be limited (less than 3 meters). This model is relatively quiet and energy-efficient, making it perfect for households looking for a cost-effective pump with minimal noise disturbance.
Thanks to the option to connect the pump to a frequency controller, you can save on energy costs by running the pump at lower speeds. Additionally, the W’eau Opti is equipped with a transparent filter basket for easy maintenance and thermal protection for added safety. If the pump overheats, it switches off automatically to prevent damage.
For which pools?
The W’eau Opti is suitable for pools up to 16 m³, performing optimally in low-resistance pools, such as those with short piping and minimal height differences. This pump is not suitable for pools with high resistance.
Maximum pool volume per resistance level:
Low resistance: 24 m³
Average resistance: 16 m³
High resistance: 0 m³
Features and Specifications
Capacity: The pump has a normal pumping capacity of 4 m³ per hour and can reach a maximum capacity of 6 m³ per hour according to manufacturer specifications.
Frequency controller: Can be connected to a frequency controller for more efficient energy consumption.
Filter basket: Features a transparent lid, making it easy to see when the basket needs to be emptied.
Saltwater resistant: Suitable for saltwater pools.
Thermal protection: Switches off automatically in case of overheating.
Noise level: With a noise level between 60 and 70 dB, this pump is relatively quiet, which increases comfort in the surrounding area.
Connections: The pump comes standard with a 50 mm connection and a plug, allowing for easy installation.
All in all, the W’eau Opti 6m³ pool pump is an excellent choice for pool owners looking for a quiet, energy-efficient, and affordable solution for small to medium-sized pools with low resistance.
23 in stock
Ordered before 10:00 PM, shipped today
The W’eau Opti pool pump 8m³ is an excellent and affordable choice for maintaining your swimming pool. This standard pool pump runs at a fixed speed and is designed for underwater installation, making it perfect for above-ground pools. With a maximum capacity of 8 m³ per hour, this pump is ideal for pools up to 28 m³. The W’eau Opti performs best at low resistance, which means the distance between the pump and the pool should be limited (less than 3 meters). The pump is not designed for intensive use, such as vacuuming pools, but is very quiet and energy-efficient, making it a smart choice for daily pool maintenance.
For which pools?
The W’eau Opti pool pump 8 m³ is suitable for pools up to a maximum of 28 m³. This pump performs optimally with low resistance, such as in pools with short piping and minimal height differences. This pump is less suitable for pools with high resistance, long pipes, or significant height differences.
Maximum pool volume:
Low resistance: 32 m³
Medium resistance: 28 m³
High resistance: 0 m³
Functions and features:
One of the biggest advantages of the W’eau Opti 8 m³ is the ability to connect the pump to a frequency controller, which allows you to run the pump at different speeds. This increases efficiency and saves energy, lowering your pool maintenance costs. Furthermore, the pump features thermal protection, which means the power is automatically cut off if the pump gets too hot. This extends the lifespan of the pump and makes it safe to use.
Simple connection:
The pump comes with a standard 50 mm connection and an included plug, ensuring easy installation. With this Plug & Play functionality, you don't have to worry about complicated connections, and you can use the pump immediately.
Specific benefits:
Energy-efficient and quiet: Compared to traditional pool pumps, the W’eau Opti is much more economical to use and produces little noise.
Frequency controller option: Connection to a frequency controller makes it possible to run the pump at variable speeds, ensuring energy efficiency.
Thermal protection: The pump shuts off automatically if the temperature gets too high, which benefits both safety and durability.
Saltwater resistant: The pump is suitable for use in saltwater pools, making it versatile.
Pool pump capacity and use:
Pump capacity under normal conditions: 7 m³ per hour
Pump capacity (factory specification): 8 m³ per hour
Pump capacity at high resistance: 0 m³ per hour
The W’eau Opti pool pump 8 m³ offers a perfect balance between price, performance, and efficiency. Thanks to its quiet operation, easy installation, and energy savings, this pump is a reliable and affordable choice for keeping your pool clean daily.
Experience ultimate relaxation with the W'eau Orta spa, a beautiful round spa suitable for up to 4 people. This spacious and stylish spa features 20 massage jets that provide targeted massage streams, perfect for relieving muscle tension and promoting relaxation. The atmospheric lighting in the shell adds an extra dimension to your wellness moment, while the 80 cm height ensures optimal comfort and a deep, relaxing seat. The W'eau Orta spa is the ideal choice for a cozy moment of rest and rejuvenation with friends or family.
Powerful massage and smart filter pump
The W'eau Orta spa provides a wonderful, powerful massage that pampers your body from head to toe. With 12 strong 2-inch jets and 8 strong 3-inch jets, you will feel the tension in your muscles simply disappear. The smaller massage jets are designed for a targeted, deep massage on specific areas. The larger jets provide extra power to the major muscle groups, such as those in your back. Whether you prefer a gentle massage or want a bit more power; this spa has the perfect setting for everyone.In addition, the spa is equipped with the reliable LX WTS50M filter pump. While other spas use the main massage pump for filtration, this separate circulation pump does so whisper-quietly and continuously. This ensures crystal-clear water, saves a significant amount of electricity, and ensures your spa components last much longer.
Suitable for heat pump
With the 50 mm connection, this spa is easily compatible with a heat pump. The advantage of a heat pump is that energy consumption is significantly reduced, as the system uses ambient air to heat the water. This makes the spa not only more sustainable but also cost-effective in the long run.
Simple installation: Plug & Play
Installing this spa is easy thanks to the Plug & Play system. You only need to connect the spa to a power supply, fill the spa with water, and you can immediately enjoy the warm water and soothing massages. No complicated installation is required, making the process quick and hassle-free.
Reliable Balboa control system
This W'eau spa is equipped with the reliable Balboa control system, a user-friendly and energy-efficient system for optimal control over temperature, jets, and lighting. The system offers simple operation and ensures reliable, cost-effective operation, with quick and precise adjustments for a perfect spa experience.
Includes cover and spa filter
With the purchase of this spa, you also receive a free cover and spa filter. This keeps the spa nice and clean from leaves, sand, or other debris. The thick cover has good insulation value. This prevents the spa from losing heat to the cold environment, and you can neatly secure it after use with the straps and buckles.
22 in stock
Ordered before 10:00 PM, shipped today
Give the exterior of your spa or hot tub a thorough refresh with the W’eau Outside Cleaner. This powerful liquid cleaner has been specially developed for cleaning the synthetic exterior of spas. Whether it concerns stubborn dirt caused by weather conditions, grease stains, deposits, or other daily grime: this cleaner removes it quickly and effectively, without damaging the surface.
The W’eau Outside Cleaner not only ensures a visibly clean surface, but also restores the natural shine of the plastic. Your spa will look like new again! Use the product undiluted for intensive cleaning or dilute it (5%) for weekly maintenance. This way, you combine power with efficiency.
✅ Application & Ease of Use
The cleaner is easy to apply with a dry cloth. Use circular motions to loosen the dirt and make the plastic casing shine again. Due to the simple user instructions and safe formula, this product is also suitable for regular application.
For weekly maintenance, the cleaner can be diluted with water (5%), which makes usage even more sustainable and cost-efficient.
Instructions for use:
Ensure the surface to be cleaned is dry.
Apply the W’eau Outside Cleaner to a dry cloth.
Clean the synthetic exterior of the spa using circular motions, until the dirt has been removed and the shine returns.
For weekly maintenance: dilute the cleaner to 5% with water (e.g., 50 ml per 1 liter of water).
10 in stock
Ordered before 10:00 PM, shipped today
The W’eau winterizing fluid is an essential product for protecting your swimming pool during the winter months. This powerful agent prevents algae formation and ensures the pool water does not turn green. Furthermore, it helps prevent limescale buildup on the pool walls, so your pool looks fresh and clean again in the spring. What makes this winterizing fluid special is that it remains effective even when the pH levels of the water are not perfectly balanced. Proper winter preparation with this fluid ensures that you can enjoy clear swimming water as soon as temperatures rise again.
The amount of winterizing fluid you need depends on the size of your pool. For a powerful effect, we recommend 1 liter of fluid per 10m³ of water, although a standard dosage of 1 liter per 25m³ is often sufficient. For the best protection, perform this treatment twice per winter so that the pool remains well protected throughout the entire winter season.
The winterizing fluid also has a long shelf life with no expiration date, so you can safely use whatever is left over the following winter.
Required amount of winterizing fluid (per winter):
15m³ pool: 3 liters
30m³ pool: 6 liters
45m³ pool: 9 liters
60m³ pool: 12 liters
75m³ pool: 15 liters
90m³ pool: 18 liters
Instructions for use of winterizing fluid:
Remove all visible dirt from your pool.
Perform a shock treatment with chlorine shock to disinfect the water thoroughly.
Wait 24 hours after the chlorine treatment.
Add 1 liter of winterizing fluid per 10m³ and distribute it evenly across the pool.
Halfway through the winter, add another 1 liter of winterizing fluid per 15m³ of water.
It is not necessary to let the pool pump circulate after adding the fluid. Always follow the safety regulations and wear gloves when using the winterizing fluid.
Safety regulations:
Always add the fluid to the water, never the other way around.
Wear protective gloves during use.
Store the fluid in a safe, dry, and cool place.
Rinse empty packaging well with pool water before disposal.
The pool is not suitable for use while the fluid is active.
Features of the winterizing fluid:
Liquid form, easy to add to the pool water.
Suitable for use in all pools, including saltwater pools.
Works well in combination with other chemicals.
Prevents green water and limescale buildup.
Works effectively at fluctuating pH levels.
With the W’eau winterizing fluid, your pool is ready to get through the winter and you are assured of clean and clear water in the spring!
25 in stock
Ordered before 10:00 PM, shipped today
The W’eau winterizing liquid is an essential product for protecting your pool during the winter months. This powerful agent prevents the formation of algae and ensures that the pool water does not turn green. In addition, it helps prevent limescale buildup on the pool edges, keeping your pool looking fresh and clean come spring. What makes this winterizing liquid special is that it remains effective even when the pH levels of the water are not perfectly balanced. Proper winter preparation with this liquid ensures you can immediately enjoy clear pool water as soon as temperatures rise again.
The amount of winterizing liquid you need depends on the size of your pool. For powerful performance, we recommend 1 liter of liquid per 10m³ of water, although a standard dosage of 1 liter per 25m³ is often sufficient. For the best protection, perform this treatment twice per winter so that the pool remains well-protected throughout the entire winter season.
The winterizing liquid also has a long shelf life with no expiration date, so you can safely use any remainder the following winter.
Required amount of winterizing liquid (per winter):
15m³ pool: 3 liters
30m³ pool: 6 liters
45m³ pool: 9 liters
60m³ pool: 12 liters
75m³ pool: 15 liters
90m³ pool: 18 liters
Instructions for use of winterizing liquid:
Remove all visible debris from your pool.
Perform a shock treatment with chlorine shock to disinfect the water thoroughly.
Wait 24 hours after the chlorine treatment.
Add 1 liter of winterizing liquid per 10m³ and distribute it evenly throughout the pool.
Midway through winter, add another 1 liter of winterizing liquid per 15m³ of water.
It is not necessary to let the pool pump circulate after adding the liquid. Always follow safety instructions and wear gloves while using the winterizing liquid.
Safety instructions:
Always add the liquid to the water, never the other way around.
Wear protective gloves during use.
Store the liquid in a safe, dry, and cool place.
Rinse empty containers thoroughly with pool water before disposal.
The pool is not suitable for use while the liquid is active.
Features of the winterizing liquid:
Liquid form, easy to add to the pool water.
Suitable for use in all pools, including saltwater pools.
Works well in combination with other chemicals.
Prevents green water and limescale.
Effective even with off-balance pH levels.
With W’eau winterizing liquid, your pool is ready to get through the winter and you are guaranteed clean and clear water in the spring!
With the W’eau peristaltic dosing pump, you can always enjoy clean and clear pool water without having to worry about it yourself. This pump ensures that the right amounts of pH and chlorine are automatically added to your pool. You simply set how much pH and chlorine should be dosed at any given time, and the pump takes care of the rest. Thanks to the dosing protection, waste is prevented and the water remains in perfect balance. With a maximum dosing capacity of 1.5 litres per hour, this dosing pump is perfect for medium-sized pools.Installation of the W’eau Peristaltic Dosing PumpInstallation is simple: attach the pump to the wall near your pool's equipment and connect the pH and chlorine supply to the water circuit. The W’eau dosing pump mixes the chemicals evenly with the water and offers you complete control thanks to the digital display. This allows you to easily adjust the dosage to the specific needs of your pool water.With the W’eau peristaltic dosing pump, you never have to worry about the right chemical balance in your pool again. Thanks to its automatic operation and precise settings, your water will always remain fresh and clear.
The W’eau peristaltic dosing pump is the ideal solution to keep your pool water clean and perfectly balanced at all times. Thanks to the automatic dosing of pH and chlorine levels, you no longer need to worry about manual additions. With an adjustable dosage of up to 1.5 liters per hour, pool maintenance becomes easier and more efficient than ever. The digital display provides a clear overview and allows you to easily adjust settings. Moreover, the built-in dosing protection ensures that excessive chlorine or pH is not added, minimizing waste.
The W’eau peristaltic dosing pump is easy to install and can be securely mounted to the wall near your pool's equipment. By connecting it directly to your pump's water line, the chemicals are evenly mixed with the pool water. This guarantees stable and safe water quality without the need for constant monitoring.
Installation of the W’eau peristaltic dosing pump
Installing the W’eau peristaltic dosing pump is straightforward and requires only a few steps:
Mounting: Securely mount the dosing pump to the wall in your pool's equipment room.
Connection: Connect the pH and/or chlorine supply hoses to the water line leading to the pump so that the chemicals are properly mixed with the pool water.
Setting up: Configure the pump via the digital display based on your desired pH and chlorine levels.
Monitoring: Keep an eye on the dosage via the display and adjust the settings if necessary.
With the W’eau peristaltic dosing pump, your pool water stays clean and perfectly balanced at all times, hassle-free!
p>
24 in stock
Ordered before 10:00 PM, shipped today
Are you experiencing cloudy pool water, limescale deposits, or is your chlorine not working as well as it should? Then there is a good chance that your pH level is too high. With W’eau pH Minus powder, you can lower the pH level quickly, easily, and effectively, so that your pool water feels clear, fresh, and comfortable again.
A correct pH level (between 7.2 and 7.6) is essential for the optimal functioning of water treatment products. By regularly adjusting the levels with this powerful pH-minus powder, you prevent unnecessary chemical consumption and skin and eye irritation, while ensuring a pleasant swimming experience for the whole family.
The fine-grained powder form ensures that the product dissolves quickly when pre-mixed with water. This allows it to be evenly distributed throughout the pool, helping you achieve the desired result quickly. Thanks to the convenient 1.5 kg packaging, this product is ideal for above-ground pools and small to medium-sized swimming pools.
With W’eau pH Minus, you choose reliable water balance, clearer pool water, and greater swimming comfort all season long.
With the W’eau pH Minus powder 5 kg, you can easily and effectively lower the pH value of your swimming pool or spa water. A correct pH value is essential for good water balance and is ideally between 7.2 and 7.6. When the pH value is too high, it can cause cloudy water, limescale, and irritation to the skin and eyes. With this powerful powder, you can quickly bring the water back into optimal condition.
Thanks to its rapid solubility, the product is immediately absorbed into the water, ensuring a quick effect. This makes it ideal for both regular maintenance and correcting an unbalanced pH value. Moreover, a correct pH value ensures that other water treatment products, such as chlorine, work better and are used more efficiently.
The generous 5 kg package is perfectly suited for both small and large swimming pools and lasts a long time. This makes it an economical choice for anyone who wants to maintain their pool water professionally.