22 in stock
Ordered before 10:00 PM, shipped today
The W’eau Full Inverter 10.5 kW swimming pool heat pump is an attractively priced top model that delivers excellent performance. Through a combination of high efficiency and the best materials, you have a highly reliable heater for your swimming pool. Thanks to this heat pump, you can dive into your comfortably heated pool from April through October. This unit can heat a swimming pool of up to 40,000 liters. However, we recommend this heat pump for pools up to 30,000 liters to fully benefit from the advantages of full inverter technology.
High-quality heat pump with substance
The heat pump distinguishes itself from other heat pumps in this price segment through its exceptionally solid materials. The high-quality ABS plastic housing makes the heat pump rust-proof. The Mitsubishi compressor, known for its reliability, works together with the twisted titanium heat exchanger to ensure optimal performance. This is reflected in the excellent efficiency of up to 15.8 COP. To fully utilize the energy benefits, we recommend choosing slightly more capacity than needed. Furthermore, the heat pump operates with a low noise level of up to 29 dB at 10 meters. Thanks to the inverter technology, the heat pump actually runs quieter when it no longer needs to operate at full power.
Heats your pool in a smart way
This W’eau heat pump uses full inverter technology. The heat pump chooses exactly the power it needs to heat your pool or keep it at the desired temperature. The heat pump switches on quickly when the temperature drops, and the device does not consume more energy than necessary. You will certainly notice this on your energy bill.
Integrated Wi-Fi module and 4 programs
Setting up this W’eau heat pump is even easier thanks to the integrated Wi-Fi module. You can use your smartphone to set the temperature, choose the desired program, and receive information about any malfunctions. The heat pump features the following programs: auto, eco, boost, and cooling.
The 'auto' program is a smart mode where the heat pump regulates the power itself. It also switches between heating and cooling. With 'eco', you put the heat pump into an energy-efficient mode similar to the 'auto' mode. However, in this setting, the heat pump does not switch to cooling. You use 'boost' to quickly bring the pool to temperature early in the season. The 'cooling' mode speaks for itself; use this to let the heat pump cool the pool.
Efficiency and consumption of the W’eau Full Inverter 10.5 kW
How much heat (in kW) does the pump extract from 1 kW of energy?
Temperature
Heat output
15°C
4.9 - 7.6 from 1
26°C
6.8 - 15.8 from 1
The efficiency of the W’eau Full Inverter 10.5 kW at high outdoor temperatures (26°C) is very high. This makes the heat pump extremely energy-efficient during the warmest summer months (May through August). The efficiency of this heat pump at lower outdoor temperatures (April, September, October) is excellent compared to other (inverter) heat pumps. This makes this heat pump the perfect choice if you want to extend your swimming season from April through October.
Installation and what you need for it
Ensure the device has 80 cm of free space at the rear. On the side where the air is blown out, it is important to keep at least 250 cm of free space. This allows you to optimally utilize the heat pump's capacity and efficiency. Connect the heat pump using a bypass kit. This is not included as standard. You can find it among the recommended combinations. This bypass regulates the flow to the heat pump. You should therefore install it in the piping before the water flows into the heat pump.
22 in stock
Ordered before 10:00 PM, shipped today
The W’eau Full Inverter 10.5 kW swimming pool heat pump is an attractively priced top model that delivers excellent performance. Through a combination of high efficiency and the best materials, you have a highly reliable heater for your pool. Thanks to this heat pump, you can dive into your pleasantly heated pool from April through October. It can heat a pool of up to 40,000 liters. However, we recommend this heat pump for pools up to 30,000 liters to take full advantage of the full inverter technology.
High-quality heat pump with substance
The heat pump distinguishes itself from other heat pumps in this price segment through its exceptionally solid materials. The high-quality ABS plastic housing makes the heat pump rustproof. The Mitsubishi compressor, known for its reliability, works together with the twisted titanium heat exchanger to ensure optimal performance. This is reflected in the excellent efficiency of up to 15.8. To fully utilize the energy benefits, we recommend opting for some extra capacity. Furthermore, the heat pump operates with a low noise level of up to 29 dB at 10 meters. Thanks to the inverter technology, the heat pump actually runs quieter when it no longer needs to operate at full power.
Heats your pool the smart way
This W’eau heat pump uses full inverter technology. The heat pump selects exactly the power it needs to get your pool up to temperature or keep it there. The heat pump switches on quickly when the temperature drops, and the device does not consume more energy than necessary. You will certainly notice this on your energy bill.
Integrated Wi-Fi module and 4 programs
Setting up this W’eau heat pump is even easier thanks to the integrated Wi-Fi module. You can use your smartphone to set the temperature, choose the desired program, and receive information about any potential errors. The heat pump features the following programs: auto, eco, boost, and cooling.
The 'auto' program is a smart mode where the heat pump regulates the power itself. It also switches between heating and cooling. With 'eco', you put the heat pump into an economical mode similar to the 'auto' mode; however, the heat pump does not switch to cooling in this mode. Use 'boost' to quickly bring the pool up to temperature early in the season. The 'cooling' mode is self-explanatory; use this to let the heat pump cool the pool.
Efficiency and consumption of the W’eau Full Inverter 10.5 kW
How much kW of heat does the pump extract from 1 kW of energy?
Temperature
Heat output
15°C
4.9 - 7.6 from 1
26°C
6.8 - 15.8 from 1
The efficiency of the W’eau Full Inverter 10.5 kW at high outdoor temperatures (26°C) is very high. This makes the heat pump extremely energy-efficient during the warmest summer months (May through August). The efficiency of this heat pump at low outdoor temperatures (April, September, October) is excellent compared to other (Inverter) heat pumps. This makes this heat pump the perfect choice if you want to extend your swimming season from April through October.
Installation and what you need for it
Ensure the device has 80 cm of free space at the rear. On the side where air is exhausted, it is important to maintain at least 250 cm of free space. This way, you optimize the heat pump's capacity and efficiency. Connect the heat pump using a bypass kit. This is not included as standard. You can find it under the recommended combinations. This bypass regulates the flow to the heat pump. You should install it in the piping before the water flows into the heat pump.
20 in stock
Ordered before 10:00 PM, shipped today
The W’eau Full Inverter 17.5 kW pool heat pump is an attractively priced top model that delivers excellent performance. Thanks to a combination of high efficiency and the best materials, you have a highly reliable heater for your pool. This heat pump allows you to dive into your pleasantly heated pool from April through October. It can heat a pool of up to 70,000 liters. However, we recommend this heat pump for pools up to 52,000 liters to take full advantage of the benefits of full inverter technology.
High-quality heat pump with substance
The heat pump stands out from other models in this price segment due to its exceptionally robust materials. The high-quality ABS plastic casing makes the heat pump rust-proof. The Mitsubishi compressor, known for its reliability, works in tandem with the twisted titanium heat exchanger to ensure optimal performance. This is reflected in the excellent efficiency rating of up to 1 to 15.8. To fully utilize the energy benefits, we recommend choosing a model with some excess capacity. Furthermore, the heat pump operates with a low noise level of a maximum of 34 dB at 10 meters. Thanks to the inverter technology, the heat pump actually runs quieter when it no longer needs to operate at full power.
Heats your pool in a smart way
This W’eau heat pump uses full inverter technology. The heat pump chooses exactly the power output it needs to heat your pool or maintain its temperature. The heat pump switches on quickly when the temperature drops, and the unit does not consume more energy than necessary. You will certainly notice this on your energy bill.
Integrated Wi-Fi module and 4 programs
Setting up this W’eau heat pump is even easier thanks to the integrated Wi-Fi module. You can set the temperature, choose the desired program, and receive information about any potential malfunctions via your smartphone. The heat pump features the following programs: auto, eco, boost, and cooling.
The 'auto' program is a smart mode where the heat pump regulates the power itself. It also switches between heating and cooling. With 'eco', you put the heat pump in an economical mode similar to the 'auto' mode; however, in this setting, the heat pump will not switch to cooling. 'Boost' is used to get the pool up to temperature quickly early in the season. The 'cooling' mode is self-explanatory: you use this to let the heat pump cool the pool.
Efficiency and consumption of the W’eau Full Inverter 17.5 kW
How much kW of heat does the pump extract from 1 kW of energy?
Temperature
Heat output
15°C
4.9 - 7.6 per 1
26°C
6.8 - 15.8 per 1
The efficiency of the W’eau Full Inverter 17.5 kW at high outdoor temperatures (26°C) is very high. This makes the heat pump extremely energy-efficient during the warmest summer months (May through August). The efficiency of this heat pump at low outdoor temperatures (April, September, October) is excellent compared to other (inverter) heat pumps. This makes this heat pump the perfect choice if you want to extend the swimming season from April through October.
Installation and what do you need for it?
Ensure that the unit has at least 80 cm of free space at the rear. On the side where the air is blown out, it is important to maintain at least 250 cm of free space. This ensures you make optimal use of the heat pump's capacity and efficiency. Connect the heat pump using a bypass kit. This is not included as standard. You can find it under the recommended combinations. This bypass regulates the flow to the heat pump. You should install it in the piping, before the water flows into the heat pump.
22 in stock
Ordered before 10:00 PM, shipped today
The W’eau Full Inverter 21 kW pool heat pump is an attractively priced top-tier model that delivers excellent performance. Through a combination of high efficiency and the best materials, you have a highly reliable heater for your pool. Thanks to this heat pump, you can dive into your pleasantly heated pool from April through October. It can heat a pool with a maximum volume of 84,000 liters. However, we recommend this heat pump for pools up to 63,000 liters to fully benefit from the advantages of full inverter technology.
High-quality heat pump with substance
The heat pump distinguishes itself from other heat pumps in this price segment due to its exceptionally robust materials. The high-quality ABS plastic housing makes the heat pump rust-proof. The Mitsubishi compressor, known for its reliability, works together with the twisted titanium heat exchanger to ensure optimal performance. This is reflected in the excellent efficiency rating of up to 15.8 COP. To fully utilize the energy benefits, we recommend opting for some excess capacity. Furthermore, the heat pump operates at a low noise level of no more than 35 dB at 10 meters. Thanks to the inverter technology, the heat pump actually runs even quieter when it no longer needs to operate at full capacity.
Heats your pool in a smart way
This W’eau heat pump uses full inverter technology. The heat pump selects exactly the power it needs to get your pool warm or to maintain its temperature. The heat pump switches on quickly if the temperature drops, and the device does not consume more energy than necessary. You will certainly notice this on your energy bill.
Integrated Wi-Fi module and 4 programs
Setting up this W’eau heat pump is even easier thanks to the integrated Wi-Fi module. You can set the temperature, choose the desired program, and receive information about any potential malfunctions via your smartphone. The heat pump features the following programs: auto, eco, boost, and cooling.
The 'auto' program is a smart mode where the heat pump regulates the power itself. It also switches between heating and cooling. With 'eco', you put the heat pump into an economical mode similar to the 'auto' mode; however, the heat pump will not switch to cooling in this setting. You use 'boost' to get the pool up to temperature quickly early in the season. The 'cooling' mode speaks for itself: this is how you let the heat pump cool the pool.
Efficiency and consumption of the W’eau Full Inverter 21 kW
How much kW of heat does the pump extract from 1 kW of energy?
Temperature
Heat output
15°C
4.9 - 7.6 from 1
26°C
6.8 - 15.8 from 1
The efficiency of the W’eau Full Inverter 21 kW at high outdoor temperatures (26°C) is very high. This makes the heat pump extremely energy-efficient during the warmest summer months (May through August). The efficiency of this heat pump at low outdoor temperatures (April, September, October) is excellent compared to other (inverter) heat pumps. This makes this heat pump the perfect choice if you want to extend your swimming season from April through October.
Installation and what do you need for it?
Ensure that the device has 80 cm of clearance at the rear. On the side where the air is exhausted, it is important to maintain at least 250 cm of clearance. This way, you optimally utilize the capacity and efficiency of the heat pump. Connect the heat pump using a bypass kit. This is not included as standard. You can find it under the recommended combinations. This bypass regulates the flow to the heat pump. You place it between the piping, before the water flows into the heat pump.
22 in stock
Ordered before 10:00 PM, shipped today
The W’eau Full Inverter 28 kW swimming pool heat pump (using three-phase power) is an attractively priced top-tier model that delivers excellent performance. Through a combination of high efficiency and the best materials, you have a highly reliable heater for your swimming pool. Thanks to this heat pump, you can dive into your pleasantly heated pool from April through October. With the W’eau Full Inverter 28 kW, you can heat a pool of up to 108,000 liters, but to optimally utilize the benefits of the inverter technology, we recommend this heat pump for pools up to 81,000 liters.
High-quality heat pump with substance
This heat pump distinguishes itself from other models in this price range through its robust materials. The high-quality ABS plastic casing makes the heat pump rustproof. The Mitsubishi compressor, known for its reliability, works together with the twisted titanium heat exchanger to ensure optimal performance. This is reflected in the excellent efficiency ratio of up to 1 to 15.8. To fully utilize the energy benefits, we recommend opting for some overcapacity. Moreover, the heat pump operates with a low noise level of a maximum of 38 dB at 10 meters. Thanks to the inverter technology, the heat pump actually runs quieter when it is no longer operating at full capacity.
Heats your pool in a smart way
This W’eau heat pump uses full inverter technology. The heat pump selects exactly the power it needs to get your pool warm or to maintain it at temperature. The heat pump switches on quickly if the temperature drops, and the device also does not consume more energy than necessary. You will certainly notice this on your energy bill.
Integrated Wi-Fi module and 4 programs
Setting up this W’eau heat pump is even easier thanks to the integrated Wi-Fi module. Use your smartphone to set the temperature, choose the desired program, and receive information about any malfunctions. The heat pump features the following programs: auto, eco, boost, and cooling.
The 'auto' program is a smart mode where the heat pump regulates the power itself. It also switches between heating and cooling. With 'eco', you put the heat pump in an energy-efficient mode similar to the 'auto' mode. However, the heat pump does not switch to cooling in this setting. Use 'boost' to quickly bring the pool up to temperature early in the season. The 'cooling' mode is self-explanatory; in this mode, you let the heat pump cool the pool.
Efficiency and consumption of the W’eau Full Inverter 27.3 kW
How much kW of heat does the pump extract from 1 kW of energy?
Temperature
Heat output
15°C
4.9 - 7.6 from 1
26°C
6.8 - 15.8 from 1
The efficiency of the W’eau Full Inverter 27.3 kW at high ambient temperatures (26°C) is very high. This makes the heat pump extremely energy-efficient during the warmest summer months (May through August). Compared to other (inverter) heat pumps, the efficiency of this model at low ambient temperatures (April, September, October) is excellent. This makes this heat pump the perfect choice if you want to extend the swimming season from April through October.
Installation and what do you need for it?
Ensure that the device has 80 cm of free space at the rear. On the side where the air is exhausted, it is important to maintain at least 250 cm of free space. This ensures you make optimal use of the heat pump's capacity and efficiency. Connect the heat pump using a bypass kit. This is not included as standard. You can find it among the recommended combinations. This bypass regulates the flow to the heat pump. Therefore, you should install the bypass between the pipes, before the water flows to the heat pump.
21 in stock
Ordered before 10:00 PM, shipped today
The W’eau Full Inverter 35 kW swimming pool heat pump (using three-phase power) is an attractively priced top-tier model that delivers excellent performance. Through a combination of high efficiency and the best materials, you have a highly reliable heater for your pool. Thanks to this heat pump, you can dive into your comfortably heated pool from April through October. With the W’eau Full Inverter 35 kW, you can heat a pool up to a maximum of 140,000 liters, but to make optimal use of the inverter technology's benefits, we recommend this heat pump for pools up to 105,000 liters.
High-quality heat pump with substance
The heat pump distinguishes itself from other heat pumps in this price range due to its extremely robust materials. The housing made of high-quality ABS plastic makes the heat pump rust-proof. The Mitsubishi compressor, known for its reliability, works together with the twisted titanium heat exchanger to provide optimal performance. This is reflected in the excellent efficiency of up to 1 to 15.8. To fully utilize the energy benefits, we recommend choosing some overcapacity. Moreover, the heat pump operates at a low noise level of a maximum of 39 dB at 10 meters. Thanks to the inverter technology, the heat pump actually operates quieter when it is no longer running at full power.
Heats your pool in a smart way
This W’eau heat pump uses full inverter technology. The heat pump selects exactly the power it needs to get your pool warm or to maintain it at temperature. The heat pump switches on quickly when the temperature drops, and the unit also consumes no more energy than necessary. You will certainly notice this on your energy bill.
Integrated Wi-Fi module and 4 programs
Setting up this W’eau heat pump is even easier thanks to the integrated Wi-Fi module. You can set the temperature using your smartphone, choose the desired program, and receive information about any potential malfunctions. The heat pump features the following programs: auto, eco, boost, and cooling.
The 'auto' program is a smart mode where the heat pump manages its own output. It also switches between heating and cooling. With 'eco', you put the heat pump into an economical mode similar to the 'auto' mode. However, in this mode, the heat pump does not switch to cooling. You use 'boost' to quickly bring the pool up to temperature early in the season. The 'cooling' mode is self-explanatory; this allows you to let the heat pump cool the pool.
Efficiency and consumption of the W’eau Full Inverter 35 kW
How much kW of heat does the pump extract from 1 kW of energy?
Temperature
Heat output
15°C
4.9 - 7.6 from 1
26°C
6.8 - 15.8 from 1
The efficiency of the W’eau Full Inverter 35 kW at high outdoor temperatures (26°C) is very high. This makes this heat pump extremely energy-efficient during the hottest summer months (May through August). The efficiency of this heat pump at low outdoor temperatures (April, September, October) is excellent compared to other (Inverter) heat pumps. This makes this heat pump the perfect choice if you want to extend the swimming season from April through October.
Installation and what do you need for it?
Ensure that the unit has 80 cm of free space at the rear. On the side where the air is blown out, it is important to maintain at least 250 cm of free space. This allows you to optimally utilize the capacity and efficiency of the heat pump. Connect the heat pump using a bypass kit. This is not included as standard. You can find it under the recommended combinations. This bypass regulates the flow to the heat pump. You should therefore place the bypass between the piping before the water flows into the heat pump.
22 in stock
Ordered before 10:00 PM, shipped today
The W’eau Full Inverter 5.5 kW swimming pool heat pump is an attractively priced top model that delivers excellent performance. Through a combination of high efficiency and the best materials, you have a highly reliable heater for your pool or spa. Thanks to this heat pump, you can dive into your pleasantly heated pool from April through October. With the W’eau Full Inverter 5.5 kW, you can heat a pool up to a maximum of 22,000 liters, but to optimally utilize the benefits of the inverter technology, we recommend this heat pump for pools up to 16,500 liters.
High-quality heat pump with substance
The heat pump distinguishes itself from other heat pumps in this price range due to its extremely robust materials. The housing made of high-quality ABS plastic makes the heat pump rustproof. The Mitsubishi compressor, known for its reliability, works together with the twisted titanium heat exchanger to ensure optimal performance. This is reflected in the excellent efficiency ratio of up to 1 to 15.6. To fully utilize the energy benefits, we recommend opting for some overcapacity. The heat pump also operates at a low noise level of a maximum of 29 dB at 10 meters. Thanks to the inverter technology, the heat pump actually runs quieter when the pump is no longer operating at full power.
Heats your pool in a smart way
This W’eau heat pump uses full inverter technology. The heat pump chooses exactly the power it needs to get your pool warm or keep it at temperature. The heat pump switches on quickly if the temperature drops, and the device does not consume more energy than necessary. You will certainly notice this on your energy bill.
Integrated Wi-Fi module and 4 programs
Setting up this W’eau heat pump is even easier thanks to the integrated Wi-Fi module. With your smartphone, you can set the temperature, choose the desired program, and receive information about any potential malfunctions. The heat pump features the following programs: auto, eco, boost, and cooling.
The 'auto' program is a smart mode in which the heat pump controls the power itself. It also switches between heating and cooling. With 'eco', you put the heat pump into an economical mode similar to the 'auto' mode. However, in this mode, the heat pump does not switch to cooling. You use 'boost' to get the pool up to temperature quickly early in the season. The 'cooling' mode speaks for itself; in this mode, you let the heat pump cool the pool.
Efficiency and consumption of the W’eau Full Inverter 5.5 kW
How much kW of heat does the pump extract from 1 kW of energy?
Temperature
Heat output
15°C
4.9 - 7.6 from 1
26°C
6.8 - 15.6 from 1
The efficiency of the W’eau Full Inverter 5.5 kW at high outdoor temperatures (26°C) is very high. This makes this heat pump extremely energy-efficient during the warmest summer months (May through August). The efficiency of this heat pump at low outdoor temperatures (April, September, October) is excellent compared to other (inverter) heat pumps. This makes this heat pump the perfect choice if you want to extend the swimming season from April through October.
Installation and what do you need for it?
Ensure that the device has 80 cm of free space at the rear. On the side where the air is blown out, it is important to maintain at least 250 cm of free space. This allows you to optimally utilize the capacity and efficiency of the heat pump. Connect the heat pump using a bypass kit. This is not included as standard. You can find it among the recommended combinations. This bypass regulates the flow to the heat pump. You should place the bypass in the piping, before the water flows to the heat pump. In the case of any automatic disinfection, you should ideally place the heat pump before it. You can read more tips, installation and usage advice here.
22 in stock
Ordered before 10:00 PM, shipped today
The W’eau Full Inverter 7.6 kW pool heat pump is an attractively priced top-tier model that delivers excellent performance. By combining high efficiency with the best materials, you have a highly reliable heater for your pool or spa. Thanks to this heat pump, you can dive into your pleasantly heated pool from April through October. This unit heats a pool of up to 28,000 liters. However, we recommend this heat pump for pools up to 21,000 liters to fully benefit from the advantages of full inverter technology.
High-quality heat pump with substance
This heat pump distinguishes itself from others in this price segment through its robust materials. The high-quality ABS plastic casing makes the heat pump rust-proof. The Mitsubishi compressor, known for its reliability, works together with the twisted titanium heat exchanger to ensure optimal performance. This is reflected in the excellent efficiency of up to 1 to 15.8. To fully utilize the energy benefits, we recommend choosing some overcapacity. Furthermore, the heat pump operates with a low noise level of up to 28 dB at 10 meters. Thanks to the inverter technology, the heat pump actually runs quieter when it no longer needs to operate at full capacity.
Heats your pool in a smart way
This W’eau heat pump uses full inverter technology. The heat pump selects exactly the power it needs to get your pool warm or to maintain its temperature. The heat pump switches on quickly when the temperature drops, and the device does not consume more energy than necessary. You will certainly notice this on your energy bill.
Integrated Wi-Fi module and 4 programs
Setting up this W’eau heat pump is even easier thanks to the integrated Wi-Fi module. Using your smartphone, you can set the temperature, choose the desired program, and receive information regarding any potential errors. The heat pump features the following programs: auto, eco, boost, and cooling.
The 'auto' program is a smart mode in which the heat pump regulates its own power. It also switches between heating and cooling. With 'eco', you put the heat pump in an economical mode similar to the 'auto' mode. However, in this setting, the heat pump does not switch to cooling. 'Boost' is used to quickly bring the pool up to temperature early in the season. The 'cooling' mode is self-explanatory; use this to let the heat pump cool the pool.
Efficiency and consumption of the W’eau Full Inverter 7.6 kW
How much kW of heat does the pump extract from 1 kW of energy?
Temperature
Heat output
15°C
4.9 - 7.6 per 1
26°C
6.8 - 15.8 per 1
The efficiency of the W’eau Full Inverter 7.6 kW at high ambient temperatures (26°C) is very high. This makes the heat pump extremely energy-efficient during the warmest summer months (May through August). Compared to other (inverter) heat pumps, the efficiency of this model at lower ambient temperatures (April, September, October) is excellent. This makes this heat pump the perfect choice if you want to extend the swimming season from April through October.
Installing your heat pump
Ensure that the unit has at least 80 cm of free space at the rear. On the side where air is exhausted, it is important to maintain at least 250 cm of free space. Do you want to optimize your heat pump's efficiency? We recommend using a bypass kit. This regulates the flow to the heat pump and is placed in the plumbing before the water reaches the pump. It ensures you get even more efficiency out of your heat pump. Please note! This bypass kit is not included as standard.
13 in stock
Ordered before 10:00 PM, shipped today
The W'eau Scent Pack contains six delightful fragrances specially designed for use in your spa. This pack is perfect for treating yourself or as a gift for a spa enthusiast. W'eau fragrances are known for their aromatherapeutic properties, which improve your mood and enhance the atmosphere. Whether you want to relax, refresh, or boost your mood, the W'eau scent pack has a suitable fragrance for every occasion.This pack contains six different fragrances, each with a bottle capacity of 250 ml. The fragrances are free from dyes, do not foam, and dissolve completely in the water without damaging the surface or technical components of your spa. The scents are based on essential oils and offer an intensive fragrance experience that supports your well-being.Instructions for use: Pour one capful of W'eau fragrance into your spa and let the aromas work their magic. For a stronger effect, you can optionally add an extra half capful.Conclusion: The W'eau Scent Pack - 6 x 250 ml is the perfect way to enrich your spa experience with high-quality fragrances based on essential oils. It offers a variety of scents suitable for every mood, from relaxation to refreshment. Thanks to the safe, non-foaming formula, this pack is ideal for long-term use in your spa without any harmful effects on the water or equipment.
12 in stock
Ordered before 10:00 PM, shipped today
The W'eau large chlorine tablets of 200 grams each have been specially developed for easy and effective disinfection of swimming pool, spa, and hot tub water. Thanks to the stabilized formula, the tablets dissolve slowly and ensure a constant chlorine release, even when exposed to sunlight. This 1 kg pack is ideal for owners of larger swimming pools, especially in-ground pools, where long-lasting and stable water quality is essential.
Safety warnings
Harmful if swallowed.
Causes serious eye irritation.
May cause respiratory irritation.
Very toxic to aquatic life, with long-lasting effects.
Always keep chlorine products separate from other chemicals.
Always add tablets to the water, never the other way around.
The W’eau HDPE-350 Top Mount sand filter is a compact and reliable solution for keeping small to medium-sized swimming pools clear and clean. With a maximum flow rate of 4.5 m³ per hour and a filter tank with a diameter of 350 mm, this sand filter is perfectly suited for private above-ground and in-ground pools with a volume of up to approximately 16 m³ (16,000 litres).
The filter tank is manufactured from sturdy polyethylene (PE/HDPE). This plastic material is particularly suitable for swimming pool installations thanks to its excellent resistance to moisture, weather conditions, and the pressure that builds up in the tank during the filtration process. This makes the W’eau HDPE-350 a solid foundation for a durable pool installation.
Effective filtration of swimming pool water
Good water circulation and filtration are essential for clear pool water. During filtration, the pool pump pumps water from the pool to the W’eau HDPE-350. The water is then guided through the filter medium in the filter tank.
Dirt particles are trapped by the filter material, after which the filtered water is returned to the pool. The HDPE-350 has a filtration fineness of approximately 25 to 30 microns, which filters small dirt particles, among other things, out of the pool water.
The sand filter therefore continuously helps to remove contamination that would otherwise remain floating in the pool water. In combination with the correct water treatment, this helps to keep the pool water clear and pleasant throughout the swimming season.
Capacity of 4.5 m³ per hour
The W’eau HDPE-350 has a maximum flow rate of 4.5 m³/h, or approximately 4,500 litres of water per hour. The sand filter is suitable for pools up to a maximum of approximately 16,000 litres.
It is important that the connected pool pump matches the capacity of the sand filter. A pump that is too powerful can force water through the filter medium too quickly, which may make filtration less effective and increase the load on the filter tank.
Space-saving Top Mount design
The HDPE-350 is designed as a Top Mount sand filter. This means that the 6-way valve is mounted on top of the filter tank.
The great advantage of this is a compact installation. With a Side Mount sand filter, the valve is located next to the filter tank, requiring more space around the tank. With the HDPE-350, the entire installation remains relatively narrow, making it ideal for placement in a technical room, garden shed, or compact pool setup.
With a diameter of approximately 350 mm and a height of about 750 mm, the filter takes up relatively little space.
Practical 6-way valve
The W’eau HDPE-350 features a multi-functional 6-way valve. This allows you to easily control how the pool water is directed through the installation.
The six positions are:
Filter: the standard operating mode. Pool water is passed through the filter medium and then returned clean to the pool.
Backwash: this reverses the water flow through the filter medium. Accumulated dirt is loosened from the filter bed and removed via the drain.
Rinse: used after backwashing to properly re-position the filter medium and flush out any remaining dirt through the drain.
Waste: pool water is led directly to the drain without passing through the filter medium. Useful when you want to lower the water level, for example.
Circulate: water circulates through the installation without passing through the filter medium.
Closed: shuts off the water flow through the 6-way valve.
Always switch off the pump before changing the position of the 6-way valve.
Easy cleaning through backwashing
A major advantage of a sand filter compared to many cartridge filters is its simple maintenance. The filter medium does not need to be removed from the filter and cleaned manually every time.
When the pressure in the filter tank increases or the water flow noticeably decreases, the filter can be cleaned using the Backwash function. The water then flows in the opposite direction through the filter bed and discharges the accumulated dirt.
After backwashing, use the Rinse setting briefly before setting the installation back to Filter.
Choice of various filter media
The filter tank has room for approximately 25 kg of filter material. When using traditional filter sand, about 25 kg of fine filter sand is required. For filter glass, a smaller amount is needed due to different material properties; for the comparable W’eau 350 filter, approximately 21–21.3 kg of fine filter glass is specified.
Filter glass is an interesting alternative to traditional filter sand. It has a long lifespan and can offer very good filtration depending on the product used. Always pay attention to the prescribed grain size and quantity of the chosen filter medium when filling.
Sturdy polyethylene filter tank
The filter tank of the HDPE-350 is manufactured from polyethylene. The great advantage of plastic is that it cannot rust and is perfectly suited for a humid swimming pool environment. Furthermore, the material is resistant to normal weather influences and the pressure load that occurs during filtration.
This makes the HDPE-350 a good choice for those looking for a solid filter tank without opting directly for a heavier, polyester-reinforced model.
50 mm connections
The W’eau HDPE-350 features a standard 50 mm connection. This allows the sand filter to be easily integrated into many permanent pool installations with 50 mm PVC piping.
For pools using flexible 32 or 38 mm pool hoses, suitable adapters or hose couplings may be required depending on the installation.
Suitable for above-ground and in-ground pools
Thanks to its compact size and capacity, the HDPE-350 is versatile. The sand filter can be used for both above-ground pools and smaller in-ground pools.
Especially for pools up to approximately 16,000 litres, the HDPE-350 offers a great combination of capacity, compact dimensions, and ease of use.
Compact sand filter for reliably clear pool water
The W’eau HDPE-350 Top Mount sand filter 4.5 m³/h is an especially strong choice if you are looking for a compact and user-friendly sand filter for a smaller pool. The sturdy polyethylene filter tank, fine 25–30 micron filtration, and the multifunctional 6-way valve ensure that you have all the important filter and maintenance functions in one installation.
Thanks to the space-saving Top Mount design, standard 50 mm connections, and the ability to use both filter sand and filter glass, the HDPE-350 is easy to integrate into a wide range of pool setups. A practical sand filter for anyone who wants to rely on good circulation and clear pool water throughout the swimming season.
The W’eau HDPE-400 Top Mount sand filter 6.5 m³/h is a powerful and low-maintenance sand filter for keeping small to medium-sized swimming pools clear and clean. With a filter diameter of 400 mm and a maximum flow rate of 6.5 m³ per hour, this model offers more capacity than the HDPE-350 and is ideal when you need just a bit more filtering power.
The filter tank is manufactured from strong HDPE (High Density Polyethylene). This material is excellently suited for pool installations as it does not rust and is highly resistant to moisture and normal weather conditions. In combination with the compact Top Mount 6-way valve, the HDPE-400 forms a practical basis for reliable swimming pool filtration.
Powerful filtration at 6.5 m³ per hour
During the filtration process, pool water is fed to the filter tank by the pool pump. In the tank, the water flows through the filter medium present, such as filter sand or filter glass. Small dirt particles are trapped within the filter material, after which the filtered water is returned to the pool.
With a maximum flow rate of 6.5 m³/h, or approximately 6,500 liters per hour, the HDPE-400 is a great intermediate size for pools where a smaller 350 mm sand filter does not provide sufficient capacity.
For optimal operation, it is important to choose a pool pump whose actual flow rate matches the capacity of the sand filter.
400 mm filter tank for a larger filter surface area
The HDPE-400 has a filter tank with a diameter of 400 mm. The larger filter surface area ensures that more filter medium is available to capture dirt from the pool water.
This offers various advantages. More dirt can be retained before a backwash becomes necessary, and the water can be effectively distributed through the filter bed.
The HDPE-400 is therefore an interesting choice when you want a compact installation but at the same time are looking for sufficient filtering capacity for daily use.
Compact Top Mount design
With this sand filter, the 6-way valve is located on top of the filter tank. This is what we call a Top Mount version.
The great advantage is that the sand filter takes up relatively little floor space. With a Side Mount version, the valve is next to the tank, which means more space is needed beside the sand filter.
This makes the W’eau HDPE-400 particularly suitable for placement in, for example, a technical room, technical box, garden shed, or compact pool installation.
Multifunctional 6-way valve
The integrated 6-way valve makes operating and maintaining the sand filter simple. With one lever, you select the desired function of the filter system.
The most important settings are Filter, Backwash, Rinse, Waste, Circulate and Closed. During normal use, the valve is set to Filter. To clean the filter medium, you use Backwash, after which you briefly rinse with Rinse. With Waste, you can send water directly to the drain, and Circulate lets the water circulate without passing it through the filter bed.
Important: always switch the pool pump off completely before changing the setting of the 6-way valve.
Easy cleaning with Backwash
Over time, more and more dirt collects in the filter medium. This increases the resistance in the filter tank, which can reduce flow.
With the Backwash function, you do not need to open the filter tank every time. The water flow is temporarily reversed, causing accumulated dirt to be loosened from the filter bed and discharged via the drain.
Afterwards, you use the Rinse function briefly to reposition the filter medium properly. Then, set the valve back to Filter and normal filtration can be resumed.
Suitable for filter sand and filter glass
The W’eau HDPE-400 can be filled with traditional filter sand or with suitable filter glass.
Filter sand is the traditional and economical choice for a sand filter. Filter glass is a popular alternative and, depending on the product chosen, can offer finer filtration and a longer service life.
Always use the correct grain size and amount of filter medium prescribed for the filter tank. An incorrect amount or grain size can negatively affect the performance of the sand filter.
Strong HDPE filter tank
The filter tank is manufactured from HDPE, or high-density polyethylene. This strong plastic is particularly suitable for use around swimming pools.
Unlike metal filter tanks, HDPE cannot rust. This is an important advantage in an environment where the material is constantly exposed to moisture and pool water.
The robust construction makes the HDPE-400 suitable for long-term use throughout the swimming season.
Suitable for above-ground and in-ground pools
Thanks to the combination of a 400 mm filter tank and a capacity of 6.5 m³/h, the W’eau HDPE-400 can be used for various types of private swimming pools.
It is, for example, suitable for larger frame pools, steel wall pools, wooden pools, and smaller permanent pools, provided the capacity of the complete installation is correctly matched to the pool volume.
Reliable filtration with extra capacity
The W’eau HDPE-400 Top Mount sand filter 6.5 m³/h is an excellent choice for those looking for a compact sand filter but who need more capacity than a standard 350 mm model can provide. The 400 mm HDPE filter tank, the maximum flow rate of 6.5 m³/h, and the practical 6-way valve make daily filtering and maintenance of the pool simple.
Thanks to the ability to use both filter sand and filter glass and the space-saving Top Mount design, the HDPE-400 is easy to integrate into various pool installations. A solid and user-friendly sand filter for clear pool water throughout the entire swimming season.
The W’eau HDPE-450 side mount sand filter offers a powerful and efficient solution for keeping pool water clean. With its robust polyethylene construction, the sand filter is highly resistant to high pressure and intensive use. This makes it perfectly suited for both above-ground and built-in pools up to 32,000 liters. Thanks to its fine filtration of 25-30 microns, the W’eau HDPE-450 ensures that even the smallest dirt particles are removed, so you can always enjoy clear and clean water.
Effective Filtration thanks to Side-Mount Design
Unlike a top mount filter, the W’eau HDPE-450 has a side mount design, where the 6-way valve is mounted on the side of the filter tank. This ensures that water is distributed more efficiently over the sand bed, resulting in better filtration. Furthermore, a side mount filter is easier to maintain, partly due to the air relief valve and the transparent filter lid, which allow you to easily check the condition of the filter without having to open it.
6-Way Valve for Versatile Functions
The 6-way valve of the W’eau HDPE-450 makes it easy to switch between different functions. This allows you to optimize the filtration process and perform maintenance on your pool water efficiently. The 6 positions are:
Filter: Water flows from top to bottom through the sand bed to remove dirt and impurities.
Backwash: Water flows in the opposite direction to flush the sand bed clean.
Rinse: Flush dirty water away after backwashing, so the filter is ready for use.
Close: Closes all inlets and outlets when the filter is not in use.
Waste: Drain pool water directly to the sewer, for example to lower the water level.
Circulate: Let water circulate without passing through the filter, ideal for chemical treatments such as algae control.
Summary:
The W’eau HDPE-450 side mount sand filter is an excellent choice for pools up to 32,000 liters. With its robust construction, fine filtration, and convenient 6-way valve, it ensures clear pool water and simple maintenance. Thanks to the side mount design, this filter is efficient in use and easy to maintain, making it an ideal choice for pool owners looking for a reliable and powerful filtration solution.
The W’eau HDPE-450 Top Mount sand filter 8 m³/h is a powerful and durable sand filter for efficiently filtering swimming pool water. With a 450 mm filter tank and a maximum flow rate of 8 m³ per hour, this sand filter offers sufficient capacity for medium-sized private swimming pools. The larger filter surface area ensures that pool water is effectively guided through the filter medium, removing dirt particles from the water.
The filter tank is manufactured from strong HDPE (High Density Polyethylene). This material is excellently suited for pool installations: it is sturdy, moisture-resistant, and cannot rust. In combination with the top-mounted 6-way valve, you get a compact and user-friendly filter solution that can be easily integrated into an existing or new pool installation.
Powerful filtration of 8 m³ per hour
With a maximum flow rate of 8 m³/h, the W’eau HDPE-450 can theoretically process approximately 8,000 liters of pool water per hour.
During the filtration process, the pool pump draws water from the swimming pool. The water is then pumped to the filter tank and guided through the filter medium. Dirt particles are trapped within the filter material, after which the filtered water flows back to the pool via the return line.
As a result, small impurities are continuously removed from the pool water. In combination with a proper water balance and correct disinfection, this contributes to clear and clean pool water.
450 mm filter tank for a larger filter surface area
The HDPE-450 features a filter tank with a diameter of 450 mm. Consequently, this version offers a larger filter surface area than, for example, the HDPE-350 and HDPE-400.
A larger filter tank means that more filter medium can be used. This allows more dirt to be trapped before the filter medium needs to be cleaned.
The HDPE-450 is therefore an attractive mid-size option for pool owners who want more filtration capacity without immediately choosing a very large sand filter.
Compact Top Mount design
The W’eau HDPE-450 is designed as a Top Mount sand filter. This means that the 6-way valve is placed directly on top of the filter tank.
An important advantage of this design is that the complete sand filter requires relatively little floor space. In a Side Mount version, the valve is located next to the filter tank, making the installation wider.
This makes the HDPE-450 easy to place in, for example, a technical room, shed, equipment box, or next to the pool.
When placing it, ensure there is sufficient free space above the sand filter for operating and maintaining the 6-way valve.
Multifunctional 6-way valve
With the integrated 6-way valve, you can easily control the various functions of the sand filter. This means you do not need to disconnect pipes for normal maintenance.
The different settings are:
Filter – the normal operating position where pool water flows through the filter medium.
Backwash – reverses the water flow through the filter bed so that accumulated dirt is flushed out via the drain.
Rinse – used after backwashing to properly re-settle the filter medium and discharge any remaining dirt.
Waste – discharges pool water directly to the drain without passing it through the filter medium.
Circulate – circulates the water through the system without filtration.
Closed – closes off the water flow through the valve.
Note: always switch off the pool pump completely before changing the setting of the 6-way valve.
Simple cleaning by backwashing
An important advantage of a sand filter is its simple maintenance. As the pool is used, more and more dirt collects in the filter medium. This increases resistance and can eventually reduce the flow rate.
Instead of opening the filter tank and cleaning the filter material manually, you simply use the Backwash function.
This temporarily reverses the water flow. The accumulated dirt is loosened from the filter bed and discharged via the waste water connection.
Afterward, you run the sand filter on Rinse for a short time and then return the 6-way valve to Filter.
Suitable for filter sand and filter glass
The W’eau HDPE-450 can be filled with various suitable filter media. The most commonly used options are filter sand and filter glass.
Filter sand is the traditional solution and is known for its simple operation and attractive price.
Filter glass is a popular alternative to sand. Depending on the filter glass used, it can offer fine filtration and generally has a long service life.
Always use the prescribed quantity and grain size for the HDPE-450. Too little, too much, or the wrong grain size can affect the filtration and flow rate.
Strong HDPE filter tank
The filter tank is manufactured from HDPE, or high-density polyethylene. This plastic combines a relatively low weight with a sturdy construction.
An important advantage is that HDPE cannot rust. This makes the material highly suitable for pool installations, where components are exposed to moisture and pool water for long periods.
The sturdy construction ensures the sand filter is suitable for years of seasonal use, provided the installation is correctly placed, maintained, and properly protected during the winter period.
Ideal for medium-sized pools
Thanks to its capacity of 8 m³/h, the HDPE-450 is primarily attractive for medium-sized private swimming pools.
Think, for example, of larger frame pools, steel-wall pools, wooden pools, and smaller to medium-sized permanent pools.
When choosing a sand filter, you should not only look at the maximum pool volume. Pipe length, pipe diameter, height differences, bends, heat pumps, and other accessories also cause resistance and can reduce the actual water flow rate.
Therefore, it is important to match the sand filter and pool pump as a single unit.
Combinable with a swimming pool heat pump
Do you want to use a pool heat pump in addition to filtration? Then the HDPE-450 can become part of a complete pool installation.
The normal sequence is, for example:
Swimming pool → pool pump → sand filter → bypass/heat pump → return to pool.
The sand filter is positioned before the heat pump so that the water is filtered first before flowing through the heat pump’s heat exchanger.
With a bypass, you can then set how much water is routed through the heat pump.
Powerful and reliable filtration for your pool
The W’eau HDPE-450 Top Mount sand filter 8 m³/h is an excellent choice when you are looking for a sturdy sand filter with sufficient capacity for a medium-sized pool. The 450 mm HDPE filter tank offers a spacious filter surface area, while the maximum flow rate of 8,000 liters per hour ensures powerful water circulation.
The combination of the durable HDPE filter tank, the compact Top Mount construction, and the multifunctional 6-way valve also makes the HDPE-450 easy to use and maintain. Thanks to the ability to use filter sand or filter glass, you can configure the installation according to your own preference.
A powerful, compact, and low-maintenance sand filter for those who want to enjoy clean and clear pool water throughout the entire swimming season.
Enjoy clean and clear pool water with the W’eau HDPE-500 side mount sand filter. This powerful filter is ideal for thoroughly cleaning pool water, so you can cool off in crystal-clear water on warm days. The W’eau HDPE-500 is designed for both above-ground and in-ground pools up to a maximum of 48,000 liters and is resistant to high pressure and heavy loads. Made of high-quality polyethylene, this filter vessel is durable and resistant to weather conditions. Thanks to the fine filtration of 25-30 microns, even the smallest impurities are removed from the pool water.
Effective Filtration thanks to Side-Mount Design
Unlike top-mount filters, the W’eau HDPE-500 features a side-mount design, where the 6-way valve is mounted on the side of the filter. This design ensures better water distribution over the sand bed, making filtration more efficient and thorough. Furthermore, the side-mount design makes maintenance easier. The transparent filter lid and the air vent ensure that you can always easily check the status of the filter without opening it.
Versatile 6-Way Valve
The W’eau HDPE-500 is equipped with a versatile 6-way valve, allowing you to easily switch between different filter functions. The six settings are:
Filter: Water flows from top to bottom through the sand bed, removing dirt and impurities.
Backwash: The sand bed is rinsed clean by letting water flow through the filter in the opposite direction.
Rinse: Dirty water is flushed away after backwashing, so the filter is ready for use.
Close: Closes all inlets and outlets when the filter is not in use.
Waste: Drains pool water directly to the sewer, ideal for lowering the water level.
Circulate: Circulates the water without passing it through the filter, ideal for chemical treatments such as algae control.
Summary:
The W’eau HDPE-500 side mount sand filter is a powerful and reliable solution for keeping pool water clean. With a capacity of 12 m³/h, this filter is suitable for pools up to 48,000 liters and offers efficient and effective filtration. Thanks to the side-mount design, the convenient 6-way valve, and the durable material, this sand filter is ideal for both private and professional pools.
The W’eau HDPE-500 Top Mount sand filter 12 m³/h is a powerful sand filter for medium to larger private swimming pools. With a maximum flow rate of an impressive 12 m³ per hour and a spacious 500 mm filter tank, this model offers significantly more filtering capacity than the smaller models in the W’eau HDPE series.
The filter tank is manufactured from durable HDPE (High Density Polyethylene). This durable plastic is perfectly suited for use around swimming pools: it is moisture-resistant, corrosion-proof, and provides a sturdy base for years of use. Additionally, the top-mounted 6-way valve ensures a compact installation and makes operating and maintaining the sand filter easy.
This makes the HDPE-500 an excellent choice if you are looking for a powerful, reliable, and user-friendly sand filter for a larger above-ground pool, steel-wall pool, wooden pool, or in-ground pool.
Powerful filtration up to 12,000 liters per hour
With a maximum flow rate of 12 m³/h, the W’eau HDPE-500 can process up to approximately 12,000 liters of pool water per hour.
During filtration, the pool pump draws water from the pool and feeds it to the sand filter. Inside the filter tank, the water is passed through the filter medium. Small dirt particles get trapped within the filter sand or filter glass, after which the filtered water flows back to the pool through the return line.
By repeating this process for several hours a day, the entire pool volume is regularly circulated through the filter. In combination with the correct pH level and disinfection, this contributes to clean, clear, and pleasant pool water.
Large 500 mm filter tank
The heart of this sand filter is the spacious 500 mm filter tank.
A larger filter tank provides more room for filter medium, resulting in a greater effective filtering surface. This allows the filter to capture more dirt, making the HDPE-500 ideally suited for installations where a significant amount of pool water is circulated daily.
Compared to, for example, a 350, 400, or 450 mm sand filter, the 500 mm tank offers extra capacity. This makes the HDPE-500 especially attractive for larger pools or situations where you deliberately want a bit of extra filtering capacity.
Compact Top Mount design
Despite the larger filter tank, the W’eau HDPE-500 remains relatively compact thanks to its Top Mount design.
The 6-way valve is located directly on top of the filter tank. This requires less clearance next to the sand filter compared to a Side Mount version, where the valve is positioned on the side.
This makes the HDPE-500 suitable for installation in, for example, a technical room, pump box, pool house, or garden shed.
Do make sure to leave enough room above the sand filter so that the 6-way valve can be operated easily and the filter remains accessible for maintenance.
6-way valve for full control
With the multi-functional 6-way valve, you can easily control what happens with the pool water. The various positions allow for both daily filtration and maintenance.
FilterThe normal operating position. The water is passed through the filter medium and then sent back to the pool.
BackwashThe water flow is reversed. This loosens accumulated dirt from the filter bed and discharges it through the waste line.
RinseUse this after backwashing. The filter medium is re-settled, and remaining dirt is sent to the drain.
WasteThe water goes directly to the drain without passing through the filter medium. This position can be used, for example, to lower the pool water level.
CirculateThe pool water circulates through the system without passing through the filter medium.
ClosedShuts off the water flow through the 6-way valve.
Important: always switch the pool pump off completely before turning the 6-way valve to a different position.
Easy cleaning with Backwash
One of the main advantages of a sand filter is its simple maintenance.
During the swimming season, more and more dirt collects in the filter medium. This increases resistance and can eventually reduce water flow.
With the Backwash function, you can clean the filter bed without having to open the filter tank. The water flow is reversed, loosening dirt between the filter material and flushing it out through the drain.
After backwashing, briefly set the system to Rinse. Then, the valve can be set back to Filter.
This allows the same filter medium to be used for a long time.
Suitable for filter sand
The traditional choice for the HDPE-500 is filter sand.
Filter sand has a specially selected grain size that traps small impurities between the sand grains while allowing pool water to continue flowing through.
Only use filter sand specifically intended for pool filters. Regular construction or play sand is not suitable for this.
A correctly filled filter tank ensures a stable filter bed and proper distribution of the pool water.
Also suitable for filter glass
Would you rather not use traditional filter sand? Then the W’eau HDPE-500 can also be filled with suitable filter glass.
Filter glass is a popular alternative to sand. The material generally has a long lifespan, and, depending on the product used, you need fewer kilograms of it than traditional filter sand.
Additionally, quality filter glass can provide very fine filtration.
Always use the quantity and grain size prescribed by the manufacturer of the filter medium.
Strong HDPE filter tank
HDPE stands for High Density Polyethylene.
This material combines a sturdy construction with a relatively low weight. Moreover, the material cannot rust, which is a major advantage in a technical room where moisture is frequently present.
As a result, the filter tank is perfectly suited for swimming pool applications and, with proper use, can last for many swimming seasons.
Ideal for medium and larger pools
With its capacity of 12 m³/h, the HDPE-500 is especially attractive for medium to larger private swimming pools.
The filter can be used for, among others:
Large frame pools
Steel-wall pools
Wooden pools
Polyester pools
Masonry pools
Other fixed in-ground and above-ground pools
When sizing a filter system, you should not only look at the pool volume. The pump capacity, pipe diameter, pipe length, height differences, and any accessories also play a role.
Combine with a suitable pool pump
The W’eau HDPE-500 is a sand filter and not a complete sand filter set. The pool pump must therefore be selected separately.
It is important that the actual flow rate of the pump matches the filter vessel. A pump that is far too powerful can push water through the filter bed too quickly and exceed the maximum allowed flow rate of the filter.
Conversely, a pump that is too small may not provide sufficient circulation.
Therefore, always match the pump and sand filter to each other.
Excellent to combine with a heat pump
The HDPE-500 can be excellently used in a pool installation with a heat pump.
A commonly used installation order is:
Pool → pool pump → W’eau HDPE-500 sand filter → bypass → heat pump → pool
The water is thus filtered first before flowing through the heat exchanger of the heat pump. This helps prevent dirt from the pool from entering the heat pump directly.
A bypass can subsequently be used to regulate how much of the filtered pool water is directed through the heat pump.
Good choice for longer pipes
In a pool installation, a portion of the theoretical pump capacity is always lost due to resistance.
Bends, valves, pipe length, height differences, a heat pump, and other components can all affect the final water flow.
The higher capacity of the HDPE-500 makes this model attractive for more extensive pool installations. Of course, the connected pool pump must also have sufficient capacity here to overcome the system resistance.
Powerful sand filter for larger pool installations
The W’eau HDPE-500 Top Mount sand filter 12 m³/h is the ideal choice when looking for more capacity than the smaller models in the HDPE series offer. With its spacious 500 mm filter vessel and a maximum flow rate of no less than 12,000 litres per hour, it forms a powerful foundation for the filtration of medium-sized and larger pools.
The practical 6-way valve makes daily use and maintenance simple, while the strong HDPE filter vessel is resistant to the damp conditions around a pool. Moreover, you can choose between filter sand and filter glass yourself.
Combine the HDPE-500 with a well-matched pool pump and optionally a bypass and heat pump, and you have a powerful and complete foundation for clear, clean, and well-circulated pool water throughout the entire swimming season.
12 in stock
Ordered before 10:00 PM, shipped today
The W’eau HDPE-650 side mount sand filter is a powerful and reliable solution for keeping your pool water crystal clear at all times. Whether for an above-ground or in-ground pool, this filter allows your pool water to be thoroughly cleaned so you can always take a refreshing dip. Thanks to its robust polyethylene material, the W’eau HDPE-650 is resistant to high pressure and heavy loads, making it perfect for intensive use and long-term performance. This sand filter is suitable for pools up to 64,000 liters and provides fine filtration down to 25-30 microns, removing even the smallest dirt particles.
Effective Filtration Thanks to Side-Mount Design
The W’eau HDPE-650 is equipped with a side-mount filter. Unlike top-mount filters, the 6-way valve is positioned on the side of the filter tank. This ensures more efficient distribution of the water over the sand bed, resulting in more effective filtration. Moreover, the side-mount design makes maintenance easier. With the air vent and the transparent filter cover, you can easily check the status of the filter without opening it.
Versatile 6-Way Valve
The 6-way valve of the W’eau HDPE-650 offers versatile options for various filtration functions. This allows you to easily switch between different settings, depending on what your pool needs:
Filter: Water flows from top to bottom through the sand bed, removing dirt and impurities.
Backwash: The sand bed is rinsed clean by having the water flow in the opposite direction.
Rinse: Flush out dirty water after backwashing so the filter is ready for use.
Close: Closes all inlets and outlets when the filter is not in use.
Waste: Drains pool water directly to the sewer, useful for lowering the water level.
Circulate: Circulates the water without passing through the filter, ideal for treating water with chemicals such as algaecide.
Summary:
The W’eau HDPE-650 side-mount sand filter is the ideal choice for large pools up to 64,000 liters. With its sturdy construction, efficient side-mount design, and versatile 6-way valve, this filter ensures a thorough cleaning of your pool water. Thanks to the easy maintenance options and fine filtration capacity of 25-30 microns, your pool will always remain clean and clear, ready for a refreshing dip.
The W’eau SPE-HDPE side-mount sand filter is a powerful and reliable solution to keep your pool water crystal clear at all times. Whether for an above-ground or in-ground pool, this filter thoroughly cleans your pool water so you can always take a refreshing dip. Thanks to the robust polyethylene material, the W’eau HDPE-650 is resistant to high pressure and heavy loads, making it perfect for intensive use and long-lasting performance. This sand filter is suitable for pools up to 64,000 liters and provides fine filtration down to 25-30 microns, removing even the smallest dirt particles.
Effective Filtration thanks to Side-Mount Design
The W’eau HDPE-650 features a side-mount filter. Unlike top-mount filters, the 6-way valve is positioned on the side of the filter tank. This ensures a more efficient distribution of water over the sand bed, resulting in more effective filtration. Furthermore, the side-mount design makes maintenance easier. With the air relief valve and the transparent filter lid, you can easily check the status of the filter without opening it.
Versatile 6-Way Valve
The 6-way valve of the W’eau HDPE-650 offers versatile options for various filtration functions. This allows you to easily switch between different settings, depending on what your pool needs:
Filter: Water flows from top to bottom through the sand bed, removing dirt and impurities.
Backwash: The sand bed is rinsed clean by flowing water in the reverse direction.
Rinse: Flush out dirty water after backwashing so the filter is ready for use.
Close: Closes all inlets and outlets when the filter is not in use.
Waste: Drains pool water directly to the sewer, useful for lowering the water level.
Recirculate: Circulates water without passing through the filter, ideal for treating water with chemicals such as algaecides.
Summary:
The W’eau HDPE-650 side-mount sand filter is the ideal choice for large pools up to 64,000 liters. With its sturdy construction, efficient side-mount design, and versatile 6-way valve, this filter ensures a thorough cleaning of your pool water. Thanks to the easy maintenance options and fine filtration capacity of 25-30 microns, your pool will always stay clean and clear, ready for a refreshing dip.
50 in stock
Ordered before 10:00 PM, shipped today
Looking to cover your swimming pool in an energy-efficient and reliable way? With the W'eau Heat Shield, you create an invisible, odorless, and insulating layer on your pool. This insulating layer prevents water evaporation and heat loss. As a result, not only does the water stay at temperature longer, but you also save significantly on water and energy costs. The W'eau Heat Shield is suitable for indoor and outdoor pools and is also a convenient cover for swimming ponds.
Less evaporation, lower costs
Thanks to the insulating layer of the W'eau Heat Shield, you can enjoy a warm pool for longer. Water evaporation caused by the sun is reduced by up to 50% with the W'eau Heat Shield. This keeps the water temperature constant for much longer, meaning you don't have to run your pool heater as often. Additionally, the water level remains stable for longer. A win-win!
Invisible, odorless, and safe
W'eau Heat Shield can be added directly to the water. The liquid is invisible, odorless, and biodegradable. Furthermore, the liquid does not leave any residue on your swimwear. You can therefore continue to swim while the W'eau Heat Shield is being added to the pool.
Instructions for W'eau Heat Shield
Check the packaging to see how much W'eau Heat Shield you need for your situation. As a general rule, you can follow this guideline: 0.8 ml per m² for swimming pools and 4 - 6 ml per m² for spas. For the best results, it is recommended to add the W'eau Heat Shield daily.
Looking to cover your pool in an energy-efficient and reliable way? With the W'eau Heat Shield, you create an invisible, odorless, and insulating layer on your pool. The insulating layer prevents water evaporation and heat loss. As a result, the water not only stays warm for longer, but you also save significantly on water and energy costs. The W'eau Heat Shield is suitable for indoor and outdoor pools and is also a convenient cover for swimming ponds.Less evaporation, lower costsThanks to the insulating layer of the W'eau Heat Shield, you can enjoy a warm pool for longer. Water evaporation caused by the sun is reduced by up to 50% with the W'eau Heat Shield. This keeps the water temperature constant for much longer, meaning your pool heater doesn't have to run as often. Additionally, the water level remains stable for longer. Win-win!Invisible, odorless, and safeW'eau Heat Shield can be added directly to the water. The liquid is invisible, odorless, and biodegradable. It also does not leave any residue on your swimwear. You can therefore continue swimming normally while W'eau Heat Shield is being added to the pool.Instructions for W'eau Heat ShieldCheck the packaging to see how much W'eau Heat Shield you need for your situation. In general, you can follow this rule: 0.8 ml per m² for pools and 4 - 6 ml per m² for spas. For the best results, it is recommended to add the W'eau Heat Shield daily.
Keep your pool heat pump clean and ensure it continues to perform optimally with the W'eau Heater Cleaner Heat Pump Cleaner - 1 liter. This special cleaner has been developed for maintaining important parts of the heat pump, including the evaporator, condenser, and the fin grille.
While using a heat pump, large amounts of outside air are drawn through the unit. As a result, dust, pollen, leaves, and other debris can accumulate between the fins over time. When the fin grille becomes clogged, air cannot flow through the heat pump as easily. This can impair performance.
With the W'eau Heater Cleaner, you can remove this dirt in a safe and simple way. Spray the cleaner onto the fins, let it soak for about 10 minutes, and then carefully rinse it off with a normal garden hose.
Specially developed for heat pumps
A pool heat pump extracts heat from the outside air. To do this, sufficient air must be able to flow through the evaporator continuously.
However, the fine fins at the back of the heat pump can easily become clogged with substances such as dust, pollen, sand, and other environmental debris.
The W'eau Heater Cleaner is specifically intended to clean these parts without the need for aggressive mechanical cleaning methods.
For optimal air circulation
A clean fin grille is important for proper air intake.
When there is a layer of dirt between the fins, the heat pump has to work harder to draw sufficient air through the evaporator. By cleaning the grille regularly, you ensure that air can continue to flow through the heat pump easily.
This helps the heat pump to continue operating as efficiently as possible.
Cleans the evaporator, condenser, and fin grille
The W'eau Heater Cleaner can be used to clean key components of the heat pump, including:
Evaporator
Condenser
Fin grille
The fins in particular require extra attention. They are thin and relatively fragile, and can easily be damaged if cleaned incorrectly.
That is why it is important to use a suitable cleaner for this and to rinse the fins gently.
Easy to apply with spray nozzle
The bottle is equipped with a practical spray nozzle that allows you to distribute the cleaner evenly over the fins.
Spray the product from top to bottom over the surface to be cleaned until an even layer is formed.
This means you do not need to use brushes or other hard materials between the fragile fins.
Let it soak for just 10 minutes
After application, let the W'eau Heater Cleaner soak in for about 10 minutes.
During this time, the product can loosen the accumulated dirt. Then, gently rinse the treated parts clean with a normal garden hose.
Do not use a high-pressure water jet.
Leaves a protective layer
The W'eau Heater Cleaner not only cleans but also leaves a protective layer on the fins.
This protective layer helps prevent new contamination, allowing the parts to stay clean longer.
For optimal results, it is recommended to repeat the treatment a few times throughout the year.
Helps maintain the efficiency of your heat pump
A dirty evaporator can reduce airflow through a heat pump. This can make the unit function less efficiently.
Regular cleaning is therefore important, not only to keep the heat pump tidy but also as part of proper technical maintenance.
With the W'eau Heater Cleaner, you help ensure that the heat pump can continue to draw in sufficient air and perform as well as possible.
Can contribute to a longer lifespan
A pool heat pump is a significant investment. Good maintenance is therefore important.
By removing dirt regularly, you prevent the evaporator and the fin grille from remaining heavily soiled for long periods.
A clean heat pump can function more efficiently, and regular cleaning can thus contribute to preserving and extending the lifespan of the unit.
How to use W'eau Heater Cleaner?
Switch off the heat pump completely before you begin maintenance.
Then spray the W'eau Heater Cleaner evenly from top to bottom over the fins. Ensure the product is well distributed.
Let the cleaner soak in for about 10 minutes.
Then gently rinse the treated parts clean with a normal garden hose. Do not use a high-pressure water jet and be careful with the fragile fins.
Allow the heat pump to drain and dry sufficiently after cleaning before using it normally again.
For proper maintenance, you can repeat this treatment a few times a year. How often cleaning is necessary depends on the environment where the heat pump is located. If there are many trees, dust, pollen, or other debris, more frequent cleaning may be needed.
Never use a high-pressure cleaner
For cleaning the fins, never use a high-pressure cleaner.
The fins of a heat pump are thin and can easily bend or become damaged due to the high water pressure. Damaged fins can subsequently impede airflow through the evaporator.
A normal garden hose with a gentle water stream is sufficient to rinse off the Heater Cleaner and the loosened dirt.
Using a vacuum cleaner on or between fragile parts is also not recommended.
Ideal for maintenance before and after the swimming season
A practical time to clean the heat pump thoroughly is at the beginning and end of the swimming season.
After an entire season, quite a bit of dust, pollen, and other contamination can have accumulated.
By letting the heat pump enter the winter clean and checking it upon restarting, you keep the unit well maintained.
Depending on the environment, an extra cleaning during the season may be wise.
1 liter content
The W'eau Heater Cleaner is supplied in a generous 1 liter package.
Thanks to the spray nozzle, you can apply the agent specifically to the parts that need cleaning.This makes the product suitable for periodic maintenance of your pool heat pump.Keep your pool heat pump in optimal conditionWith the W'eau Heater Cleaner Heat Pump Cleaner - 1 Liter, periodic maintenance of your pool heat pump becomes simple. The cleaner removes dirt from the evaporator, condenser, and finned grid, allowing the heat pump to continue drawing in sufficient air.Spray the Heater Cleaner onto the fins, let it soak for approximately 10 minutes, and then rinse carefully with a garden hose. This helps maintain the heat pump's efficiency and ensures your system remains well-maintained season after season.
Protect your spa optimally against all weather conditions with the W'eau Hudson Spa Protective Cover 185 x 110 x 85 cm. This high-quality protective cover is specially designed to protect both the spa cover and the entire spa surround from rain, snow, UV radiation, leaves, dust, and other debris. Thanks to the extra-high 85 cm design, not only does the cover stay clean, but the entire exterior of the spa is also protected. This extends the lifespan of your spa and keeps it looking like new for years to come.
The protective cover is made of high-quality, water-resistant, and breathable polyester. This prevents the spa cover from absorbing rainwater and becoming heavy. At the same time, the breathable material allows moisture to escape, reducing condensation and mold formation. This ensures that both the spa cover and the surround remain in optimal condition.
With dimensions of 185 x 110 x 85 cm, this protective cover is perfectly suited for spas with an outer dimension of 185 x 110 cm. The cover has an overlap of approximately 10 cm all around and is equipped with a sturdy drawstring, so it can be easily secured tightly around the spa. This ensures the protective cover stays firmly in place, even during strong winds.
In addition to protection against dirt and weather, the cover also prevents discoloration of the spa surround caused by UV radiation and reduces wear and tear from rain, frost, and temperature fluctuations. As a result, you spend less time on maintenance and enjoy a well-maintained spa for longer.
For the best results, it is recommended to create sufficient ventilation under the cover. For example, place a bucket or ball under the cover so that rainwater runs off easily and no water pockets form. Additionally, remove the cover regularly so the spa cover can air out properly.
The W'eau Hudson Spa Protective Cover is the ideal choice for spa owners who want to optimally protect their investment against the elements and dirt.
At Azzura Pool, we believe in affordable luxury, and this spa is the perfect example of it. The Hudson spa is an affordable, high-quality hot tub. It is made of thick acrylic, making it highly resistant to weather conditions and scratches. This 3-person spa is compact, allowing it to fit well in smaller gardens. All seats and loungers are equipped with their own unique massage pattern and setting. So, do the spa dance—err, musical chairs—and switch spots for a full massage experience. Will you claim one of the two loungers, or do you prefer to sit upright during your hydromassage?
Ultimate enjoyment in your own spa
The 22 jets of this W'eau spa provide a powerful hydromassage. Do you prefer an extra firm massage or a more relaxing one? You can easily adjust the pressure of the jets with the dial on the jets themselves. You can set this individually for each seat; handy, right? While it is incredibly cozy and fun to sit in the W'eau Hudson spa with 3 people, you have more space and are even more comfortable when there are two of you or when you're alone.
High-quality systems
This spa is equipped with the Balboa control system, which means that the highest quality materials are used under the hood of this spa. The spa water is disinfected using an ozone generator. The ozone gas is dispersed into the water via the jets, which keeps the water fresh and clear for longer compared to using chlorine alone. This also allows for slightly less chlorine usage, resulting in less chlorine odor and less eye irritation. Furthermore, the spa features a powerful 2-speed massage pump. Thanks to the special design of the pump, the noise level is low, which keeps your neighbors happy even when they aren't joining you for a soak.
Heat pump connection
This spa is equipped with a built-in heat pump connector, allowing you to easily connect a heat pump. It features a convenient 50mm connection that lets you connect almost any heat pump. This gives you the option to heat your spa in the most efficient way possible.
Easy installation, plus free cover and spa filter
This is a plug-and-play spa, which means it is easy to install. Plug it into the outlet, put the garden hose in the spa, and start filling! Of course, just make sure you can get the spa into your garden. Help from a pair of strong hands is definitely recommended for that. With the purchase of this spa, you will also receive a free cover and spa filter. This keeps the spa clean from leaves, sand, or other debris. The thick cover has excellent insulation properties. This ensures the spa doesn't lose heat to the cold environment, and you can neatly lock it up after use with the straps and buckles.
Do you want to enjoy your spa all year round, regardless of the weather? Then this W’eau Hybrid spa heat pump is exactly what you are looking for. It heats the water on cold days and provides cooling during hot summers. Super energy-efficient and suitable for spas up to 1300 litres.
Extra economical thanks to Full Inverter technology
The power of this heat pump lies in its Full Inverter technology. This means it automatically adjusts its output based on what your spa needs at any given moment. And that provides significant benefits. For example, it converts 1 kW of energy consumption into 5 to even 12.5 kW of heating capacity, depending on the outside temperature. Good for the environment and for your energy bill.
Smart protection with the built-in relay kit
Cold weather? No worries. Thanks to the built-in relay kit, the pump switches on automatically as soon as the temperature outside drops below freezing. This keeps your spa protected against freezing. Is your water back up to temperature? Then the pump switches itself off. Handy and efficient!
Always in control with built-in Wi-Fi
Need to quickly adjust the temperature or check if everything is working properly? You can do that easily with your smartphone. This heat pump has an integrated Wi-Fi module, allowing you to manage everything from the accompanying app.
Easy to install
When installing, it is important to keep enough space clear around the pump: at least 80 cm at the back and 250 cm at the front (where the air comes out). You connect the pump using a bypass kit (sold separately), which allows you to properly regulate the water flow.
Heating and cooling
This hybrid heat pump does its job all year round. In winter, you heat the water up to 40 °C, and in summer, you can cool it down to a pleasant temperature. With a range of 15-40 °C for heating and 8-35 °C for cooling, you are always set. And an added bonus: you can also use it for your swimming pool.
Are you looking for a powerful heat pump that not only heats your spa but also cools it down? The W’eau Hybrid Spa Heat Pump - 7.3 kW offers you the flexibility to enjoy your spa optimally all year round, regardless of the weather. With this pump, you can easily regulate the temperature, whether you are seeking warmth during colder months or need cooling in the summer.
Optimal Performance and Capacity This heat pump is designed to heat spas with a capacity of up to 29,000 liters, although we recommend using it for spas up to 22,000 liters for the best results. At 15 °C, the pump delivers an output of 5.2 kW, and when the outdoor temperature rises to 26 °C, it can deliver as much as 7.3 kW. A 50 mm connection is required for proper installation.
Heating and Cooling for Every Season Whether it is winter or summer, you can always enjoy your ideal water temperature with the W’eau Hybrid Spa Heat Pump. Heat the water to a pleasant 40 °C in the colder months, or cool it down to 8 °C on hot summer days. Thanks to its hybrid nature, this heat pump can also be used for swimming pools, making it even more versatile.
Built-in Relay Kit for Automatic Protection The W’eau Hybrid heat pump features a built-in relay kit, a smart function that protects your spa against freezing. This technology automatically switches on the heater when the temperature drops below 0 °C, and switches it off again once the desired temperature has been reached. This keeps your spa protected and prevents energy waste.
Full Inverter Technology for Energy-Efficient Use Thanks to Full Inverter technology, the W’eau heat pump automatically adjusts its power based on demand. This ensures that only the necessary energy is consumed to keep the water at the desired temperature, resulting in lower energy costs and more efficient consumption.
Controllable via your Smartphone With the integrated Wi-Fi module, you have full control over your heat pump wherever you are. Via your smartphone, you can set the temperature, choose programs, and receive direct notifications in case of any malfunctions. This way, you are always informed about the status of your spa and heat pump.
Energy-Efficient and High Performance At a temperature of 26 °C, the heat pump offers an impressive efficiency of 2.6 - 6.9 kW from just 1 kW of energy. This makes the W’eau Hybrid Spa Heat Pump not only powerful but also highly energy-efficient during warm months. It also performs efficiently at lower temperatures, making it a reliable choice all year round.
Installation Requirements Ensure there is sufficient space around the heat pump for optimal operation: at least 80 cm at the rear and 250 cm at the front (air outlet side). A bypass kit is required for proper flow, which must be purchased separately.
Choose the W’eau Hybrid Spa Heat Pump and enjoy ultimate comfort in your spa all year round!
10 in stock
Ordered before 10:00 PM, shipped today
Complete your ice bath with the W’eau ice bath chiller! No more lugging around ice cubes, but always the perfect temperature between -5 °C and 43 °C, fully adjustable to your preference. This chiller is ideal for athletes who want to recover faster, as well as for those who want to reduce stress or simply enjoy the benefits of cold therapy. Thanks to the Tuya App, you can easily control the chiller with your smartphone, so your ice bath is always ready whenever you want.
Plug & Play convenience
The W’eau ice bath chiller is delivered ready to use. Place it next to your ice bath, connect the 20 mm fitting, plug it into the socket, and set the desired temperature. A 100-liter bath is cooled in approx. 1 hour and 20 minutes, and a 500-liter bath in approximately 6 hours and 40 minutes.
User-friendly and mobile
Thanks to its smart design, handles, and included wheels, you can move the chiller easily. With a noise level of less than 49 dB (at a distance of 1m), it is also quieter than a normal conversation – ideal for relaxing in peace.
Stylish and low-maintenance
The neat finish and compact design ensure a sleek look in your garden or gym. For maintenance, the chiller has convenient service access on the side, so you can easily replace filters or parts.
The W’eau Iseo Spa is a compact, luxurious permanent spa specifically developed for two people. With two full-sized loungers, no fewer than 22 powerful massage jets, atmospheric LED lighting, and a reliable Balboa control system, you can bring a complete wellness experience to your own garden or terrace. Thanks to its external dimensions of only 210 x 110 x 74 cm, the Iseo also takes up significantly less space than many traditional permanent spas.
The Iseo stands out primarily for its combination of compact size and full-fledged spa comfort. Both people can relax lying down, meaning you don't have to sit upright next to each other. The ergonomically shaped shell supports the body while the various massage jets specifically target relaxation for your back, shoulders, legs, and feet, among other areas.
Powerful hydromassage with 22 jets
Despite its compact size, the W’eau Iseo features a serious massage system. A total of 22 hydromassage jets are distributed across the two loungers:
16 powerful 50 mm massage jets
4 powerful 2-inch massage jets
2 large 3-inch massage jets
Powerful 2 HP two-speed massage pump
By combining different sizes of jets, a varied massage is created. The smaller jets provide a more targeted water stream, while the larger jets massage a wider area of the body. This makes the Iseo not only suitable for relaxing quietly in warm water, but also provides the powerful hydromassage you expect from a permanent spa.
Two comfortable loungers
An important advantage of the Iseo is its layout. The spa is truly designed around two loungers and does not have traditional seats. This optimizes the use of the available space.
With a capacity of approximately 510 liters, the amount of water remains relatively limited. This is favorable for heating, maintaining, and refreshing the spa water. At the same time, the shell offers enough room for two people to relax comfortably.
Balboa control system
For technology and operation, the Iseo uses the well-known Balboa BP200/TP500S control system. You can easily manage the spa’s most important functions via the control panel.
The integrated Balboa heater has an output of 2 kW and can heat the water up to a maximum of 40 °C. Under suitable conditions, a heating rate of approximately 1.5 to 2.5 °C per hour is specified.
For extra convenience, the spa can optionally be expanded with a Balboa ControlMySpa WiFi module. This allows compatible spa functions to be controlled remotely.
Prepared for an external heat pump
An interesting advantage of the W’eau Iseo is the option to connect an external spa heat pump. The spa is prepared for this with a 50 mm heat pump connection.
For people who use the spa frequently, a suitable heat pump can be an interesting addition. Instead of heating exclusively with electricity using the built-in heater, a heat pump can use heat from the outside air to warm the water.
UVC water treatment
The Iseo is equipped with a UVC unit. This involves treating water flowing past a UV lamp with ultraviolet light. This supports water maintenance by helping to inactivate microorganisms.
UVC does not, however, fully replace normal spa water maintenance. The pH value and disinfectant level of the water must still be maintained correctly.
Additionally, the spa uses a replaceable W’eau spa filter type 14 filter cartridge to remove suspended contaminants from the water.
Atmospheric LED lighting
The W’eau Iseo also comes into its own in the evening. The spa features atmospheric lighting in the shell. The combination of warm water, hydromassage, and lighting ensures that the spa can be used both during the day and in the evening as a compact wellness spot.
Well-insulated permanent spa
The Iseo has a sturdy acrylic shell and an insulated construction. Good insulation is important for a permanent spa, as the water is kept at temperature for long periods.
After use, you place the included insulating cover over the spa. This helps limit heat loss at the top while simultaneously preventing leaves, dust, and other debris from easily getting into the water.
Compact size
With external dimensions of 210 x 110 cm, the Iseo is particularly interesting if you want a real permanent spa but do not have the space for a large square model.
The spa is only 74 cm high, while the water line is approximately 67 cm. When empty, the spa weighs about 167 kg. When filled, the total weight is approximately 677 kg, so placement on a sufficiently sturdy, level, and load-bearing surface is important.
Plug & Play on 230 volts
The W’eau Iseo runs on 230 V and is offered as a Plug & Play spa. This makes installation easier than with many larger permanent spas that require a heavier electrical installation.
However, you must always take electrical regulations and the requirements in the installation manual into account, especially since electricity and water are in close proximity here.
Compact private wellness for two
The W’eau Iseo Spa – 2 person is particularly interesting for those who do not want a huge jacuzzi in their garden, but are looking for the comfort and technology of a real permanent spa. The combination of two loungers, 22 hydromassage jets, Balboa technology, UVC water treatment, atmospheric lighting, and the option to connect an external heat pump makes the Iseo remarkably complete.
With only 510 liters of water and dimensions of 210 x 110 cm, you can create a full-fledged wellness spot even in a relatively limited area where you can relax together all year round.
12 in stock
Ordered before 10:00 PM, shipped today
Protect your spa optimally against weather influences with the W'eau Iseo Spa Protective Cover 210 x 110 x 85 cm. This high-quality protective cover has been specially developed to protect both the spa cover and the entire spa cabinet against rain, snow, UV radiation, leaves, dust, and other dirt. Thanks to the extra-high design, not only does the cover stay clean, but the entire exterior of the spa is also protected. This significantly extends the lifespan of both the spa and the cover.
The protective cover is made of strong, water-resistant, and breathable polyester. This high-quality material prevents rainwater from soaking into the spa cover, which helps keep the cover from becoming heavy. At the same time, the breathable material ensures that moisture can escape, limiting condensation and mold formation.
With dimensions of 210 x 110 x 85 cm, this protective cover is perfectly suited for spas with an outer dimension of 210 x 110 cm. The cover has an overlap of approximately 10 cm all around and is equipped with a sturdy drawstring, making it easy to fasten tightly around the spa. This keeps the cover neatly in place, even in strong winds.
In addition to protection against dirt, the cover also prevents the spa cabinet from discoloring due to sunlight and reduces wear and tear caused by rain, frost, and temperature fluctuations. This keeps your spa looking like new for longer and means you have to spend less time on maintenance.
For optimal results, it is recommended to create sufficient ventilation under the cover. For example, place a bucket or ball under the cover so that rainwater runs off easily and no water pockets form. Additionally, remove the cover regularly so that the spa cover can air out properly.
The W'eau Iseo Spa Protective Cover is the ideal choice for spa owners who want to optimally protect their investment and enjoy a neat, clean, and well-maintained spa for years to come.
The W'eau Iseo Spa with heat pump – 2-person is a compact and luxurious hard-sided spa for two people, combined with an energy-efficient external spa heat pump. This allows you not only to enjoy powerful hydromassage and wonderfully warm water, but also to heat the water and maintain its temperature more efficiently.
With its compact dimensions of 210 x 110 x 74 cm, the W'eau Iseo is ideal for smaller gardens, terraces, and covered areas. The spa features two comfortable loungers, allowing both people to relax completely.
With 22 massage jets, a powerful 2 HP massage pump, Balboa control, UVC water treatment, and atmospheric LED lighting, the Iseo offers a complete wellness experience despite its compact size.
Includes energy-efficient spa heat pump
This version of the W'eau Iseo comes in combination with an external spa heat pump.
A heat pump extracts a large portion of the required heat from the outside air and then transfers it to the spa water. As a result, the built-in electric heater has to do less work.
Especially when you use the spa regularly and want to keep the water at temperature for longer periods, a heat pump can significantly reduce energy consumption for heating.
The Iseo features a 50 mm connection for an external heat pump, allowing it to be neatly integrated into the water circuit.
Two comfortable loungers
The W'eau Iseo is specifically designed for two people and features two full-size loungers.
This allows both users to relax fully stretched out instead of having to sit upright. The design of the shell supports the body while the various massage jets provide the hydromassage.
The spa has a capacity of approximately 510 liters. This is relatively low for a fixed two-person spa and means that less water needs to be heated, filtered, and treated than with a larger spa.
22 powerful massage jets
The W'eau Iseo features no fewer than 22 hydrotherapy jets.
These are divided into different sizes:
16 massage jets of 50 mm
4 massage jets of 2 inches
2 large massage jets of 3 inches
By combining different jet sizes, a varied massage is created. The larger jets provide a more powerful, targeted water stream, while the smaller jets distribute the massage over different body zones.
Powerful 2 HP massage pump
The massage jets are powered by a 2 HP dual-speed massage pump.
This gives the compact Iseo enough power for a vigorous hydromassage. You can relax wonderfully while the warm water and water jets massage different parts of the body.
Balboa control system
For technical control, the Iseo is equipped with a Balboa BP200/TP500S control system.
Via the control panel, you can easily manage the main functions of the spa, such as water temperature, massage pump, and lighting.
Balboa is a widely used system for hard-sided spas and is known for its clear and user-friendly operation.
Built-in 2 kW heater
In addition to the external heat pump, the spa remains equipped with its own 2 kW Balboa heater.
This gives you two options for heating the water. The heat pump can be used for energy-efficient heating and temperature maintenance, while the integrated heater remains part of the original spa installation.
The maximum water temperature is 40°C.
Lower heating costs with a heat pump
A traditional electric spa heater converts electrical energy directly into heat. A heat pump works differently: it extracts a large portion of the heat from the outside air.
This allows a heat pump to deliver several kWh of heat to the water for every kWh of electricity consumed.
The actual efficiency depends on factors such as:
Outside temperature
Desired water temperature
Insulation of the spa
Use of the insulating cover
Usage frequency
Settings of the heat pump
The combination of the Iseo with a heat pump can be particularly attractive for long-term temperature maintenance.
UVC water treatment
The W'eau Iseo features an integrated UVC system.
During circulation, the water is guided past the UVC system. This supports regular water treatment and helps reduce the microbiological load of the water.
UVC does not replace normal water treatment. The pH value and disinfectant level must still be checked and corrected regularly.
Filter cartridge for clean spa water
For mechanical filtration, the Iseo uses a replaceable filter cartridge.
The filter captures small dirt particles from the circulating spa water. By rinsing the cartridge regularly and replacing it in a timely manner, the flow through the filter system remains optimal.
For the Iseo, the W'eau Spa Filter Type 14 (e.g., SC714 / 6CH-940) can be used.
Atmospheric LED lighting
Relaxing in the Iseo is also wonderful in the evening.
The spa features LED floor lighting and several small LED light points that provide an atmospheric wellness look.
Combined with the warm water and massage jets, you can easily create your own wellness environment in the garden.
Compact size
A key advantage of the Iseo is its size.
With dimensions of approximately 210 x 110 x 74 cm, the spa is only 110 cm wide. This allows it to fit in places where a traditional square 5- or 6-person spa is often too large.
This makes the Iseo particularly interesting for a smaller garden, terrace, or covered area.
Includes insulating spa cover
An insulating protective cover is included with the spa.
This helps reduce heat loss through the water surface when the spa is not in use. Additionally, the cover keeps leaves, dust, and other debris out of the water.
For a spa with a heat pump, a good insulating cover is extra important. The less heat the spa loses, the less energy is needed to keep the water at temperature.
W'eau Jet Clean - 500 ml is a powerful cleaner specially designed to remove oils, dirt, and mineral deposits from the pipes and jets of your spa. This 'invisible cleaner' targets the parts of the spa you don't see, but which are essential for proper water flow and the maintenance of your equipment. By cleaning the pipes and jets, W'eau Jet Clean prevents the buildup of dirt that can restrict water circulation and cause potential damage to the equipment. We recommend using the product every three months, just before changing the water, to ensure your spa continues to function optimally.
Safety instructions:
Causes skin irritation and serious eye damage.
Very toxic to aquatic life with long-lasting effects.
Always wear protective gloves and keep the product out of reach of children.
Store the product in a well-ventilated area and in a tightly closed container.
W'eau Jet Clean is the ideal solution to ensure that your spa always functions properly and remains free from harmful buildups of dirt, oils, and minerals.
The W'eau 20-gram small chlorine tablets are specially designed for disinfecting water in swimming pools, spas, and hot tubs. In a 1 kg pack, these tablets offer an easy and effective way to keep your pool clean and hygienic. The tablets are stabilized, which means they are resistant to degradation by sunlight and therefore have a long-lasting effect. They dissolve slowly and ensure a continuous release of chlorine, making them ideal for maintaining smaller pools, spas, or above-ground pools.
Ideal Dosage for Small Pools The smaller 20-gram chlorine tablets are perfectly suited for above-ground pools or other smaller water features, where large tablets might be too strong. Due to their stabilized action, the tablets offer a long-lasting, consistent chlorine release without the need for constant adjustment. This makes maintenance simpler and more cost-effective.
User-Friendly and Reliable Because the tablets can easily be placed in a chlorine floater or skimmer, they are very convenient to use. They dissolve slowly in the water, providing constant, uniform disinfection. This helps to keep bacteria and algae under control and ensures clear, hygienic swimming water. The tablets are also safer and more precise to use than powder, as they dissolve gradually and do not release their active ingredients abruptly.
Safety and Usage Instructions When using chlorine tablets, it is essential to follow the safety regulations strictly. Always add the tablets to the water and never the other way around. Keep chlorine tablets separate from other chemicals to prevent dangerous reactions. Read the instructions on the packaging carefully and always wear protective gloves when handling chemicals.With W'eau small chlorine tablets, you can maintain clear and clean water in your pool or spa with minimal maintenance.
PLEASE NOTE: Packaging damaged, CONTENTS OK.Ships in original packaging, but the lid and exterior are damaged.The W'eau 20-gram small chlorine tablets are specially designed for disinfecting water in swimming pools, spas, and hot tubs. In a 5 kg pack, these tablets offer an easy and effective way to keep your pool clean and hygienic. The tablets are stabilized, meaning they are resistant to degradation by sunlight and therefore have a long-lasting effect. They dissolve slowly and ensure a continuous release of chlorine, which is ideal for maintaining smaller pools, spas, or above-ground pools.
Ideal Dosage for Small Pools The smaller 20-gram chlorine tablets are perfectly suited for above-ground pools or other smaller bodies of water where large tablets might be too strong. Thanks to their stabilized action, the tablets offer long-lasting, consistent chlorine release without the need for constant adjustment. This makes maintenance simpler and more cost-effective.
User-Friendly and Reliable Because the tablets can easily be placed in a chlorine floater or skimmer, they are very easy to use. They dissolve slowly in the water, providing constant, even disinfection. This helps keep bacteria and algae under control and ensures clear, hygienic swimming water. The tablets are also safer and more precise to use than powder, as they dissolve gradually and do not release their active ingredients all at once.
Safety and Instructions for Use When using chlorine tablets, it is essential to strictly follow safety regulations. Always add the tablets to the water, never the other way around. Keep chlorine tablets separate from other chemicals to prevent dangerous reactions. Read the instructions on the packaging carefully and always wear protective gloves when handling chemicals.With W'eau small chlorine tablets, you can maintain clear and clean water in your pool or spa with minimal maintenance.
Experience ultimate relaxation in the luxurious W’eau Lagune spa with seating for six – perfect for cozy moments with family or friends. This high-quality spa combines powerful hydromassage, atmospheric lighting, and energy efficiency in one stylish design. Thanks to the included hybrid heat pump, you can enjoy comfort and wellness without the high energy bill.
Whether you want to unwind after a long day or let your muscles be pampered by the powerful jets, the W'eau Lagune offers a complete wellness experience, right in your own home.
The 40 jets of this W'eau spa provide a powerful hydromassage. Do you prefer an extra firm or a more relaxing massage? You can easily adjust the jet pressure with the dial on the jets. This can be set individually for each seat—convenient, right? While the W'eau Lagune spa is incredibly cozy and snug for 6 people, you'll have more space and be even more comfortable with four.
High-quality systems
This spa is equipped with the Balboa control system, meaning that the highest quality materials are used under the hood. The spa water is disinfected using an ozone generator. The ozone gas is dispersed into the water via the jets, keeping the water fresh and clear for longer compared to using chlorine alone. This also allows for slightly less chlorine usage, resulting in less chlorine smell and less eye irritation. In addition, the spa features a powerful 2-speed massage pump. Thanks to the pump's special design, the noise level is low, which helps keep your neighbors happy when they aren't joining in for a soak.
Heat pump connection
This spa is equipped with a built-in heat pump connector, allowing you to easily connect a heat pump. It features a convenient 50mm connection that lets you connect almost any heat pump, giving you the ability to heat your spa in the most efficient way possible.
Easy to install
Installation service? Forget it! With a little help from a few pairs of strong hands and some technical knowledge, you can easily connect the W'eau spa yourself. The only thing you still need to do is plug it in. After that, just put in the garden hose and fill it up. It shouldn't take longer than an hour. Of course, just make sure you can easily get the spa into your garden. Help from a few strong hands is definitely useful for that.
11 in stock
Ordered before 10:00 PM, shipped today
The W'eau Slat Cleaner has been specially developed to effectively remove limescale and dirt from pool slats and other surfaces. This powerful cleaning formula ensures your pool slats remain clean and shiny, and prevents unnecessary wear and tear. Regular use of this slat cleaner extends the lifespan of your cover and keeps your pool hygienic and fresh.
Simple and effective to use The W'eau Slat Cleaner is easy to use and provides effective results. It is recommended to use the cleaner approximately twice a year for optimal maintenance of your pool slats. The cleaner is suitable for all types of slats and pool covers. Using it is simple: dampen the slats, apply the diluted cleaner, let it soak in, and then rinse thoroughly with a pressure sprayer. After treatment, it is important to restore the pH level of the pool water by backwashing the filter well.
How do you use the W'eau Slat Cleaner?
First, dampen the slats with water.
Dilute the cleaner: use 1 liter of W'eau Slat Cleaner to 3 liters of water per 10 m² and apply with a mist sprayer.
Let the cleaner soak in for 1 to 2 hours to effectively loosen limescale and dirt.
Rinse the slats thoroughly with a pressure sprayer to remove the residue.
Don't forget to backwash the filter and increase the pH level of the pool water after treatment.
Conclusion The W'eau Slat Cleaner is an essential cleaner for pool owners who want to keep their slats clean, shiny, and in good condition. With its powerful formula, it is the perfect solution for removing stubborn limescale and dirt. This cleaner ensures a longer lifespan for your cover and makes maintenance simple and effective.
25 in stock
Ordered before 10:00 PM, shipped today
A leaking pool or spa? Don't panic! With W’eau Leak Sealer, you have a powerful and effective liquid at your fingertips that automatically detects and seals small leaks up to approx. 3 mm – without any demolition or dismantling. Whether it involves a leak in a pipe, fitting, liner, or tiled wall, this smart liquid actively searches for the leak and hardens there within 48 hours.
User-friendly and efficient, suitable for both indoor and outdoor pools and even spas. Add it to the water, let it circulate, and leave the rest to the sealer. This way, you will be back to enjoying a leak-free pool in no time.
⚙️ Instructions for use
PreparationEnsure the water is clean and all filters have been cleaned. Remove active carbon or UV systems if present.
Dosage
For spas: Add 1 ml of Leak Sealer per 60 liters of water.
For swimming pools: Pour the contents directly into the water, preferably via the skimmer or near the suspected leak.
CirculationAllow the system to circulate for 24 hours without the heat pump. Is a heat pump connected? Then temporarily close the bypass to prevent damage.
CuringAfterwards, let the water rest for at least 48 hours so the sealer can cure. Avoid using the pool during this period.
⚠️ Important warnings
Only use when water temperatures are above 6 °C
Do not mix with other chemicals
Keep out of reach of children
Wear protective gear when dosing
With W’eau Leak Sealer, you can resolve small leaks in your pool or spa quickly, safely, and easily – without having to dig, drill, or open up pipes. Add it, let it circulate, and enjoy your pool worry-free again.
The W’eau Maxi pool pump is a robust and reliable pump for swimming pools up to a maximum of 36 m³. This model operates at a fixed speed and offers excellent performance with low resistance. The pump is ideal for pools with a limited distance between the pump and the pool (less than 3 meters) and situations where intensive use of a pool vacuum is not required. Thanks to its quiet operation and energy efficiency, this is a smart choice for pool owners looking for a durable pump.
For which pools?
The W’eau Maxi pool pump is most suitable for pools with a volume of up to 36 m³ with low resistance and up to 32 m³ with medium resistance. The pump functions best in situations where pipe length and height differences are limited. Pools with high resistance, such as long pipes or height differences, should consider a different pump.
Easy to use and maintain
The pump is self-priming, which means it can work trouble-free with shorter distances and small height differences. It features a large filter basket with a transparent lid, making it easy to check when it needs to be emptied. In addition, the pump can be connected to a frequency controller, allowing you to adjust the speed and save energy.With the W’eau Maxi pool pump, you can enjoy a stable and efficient pool pump that helps you keep your pool water clean and clear, with minimal effort and cost!
The W’eau Maxi swimming pool pump 15 m³ is a powerful and efficient pool pump designed to keep your pool water clean and fresh. This standard pump runs at a fixed speed and is suitable for pools with a capacity of up to 56,000 liters. The pump performs best in pools with low resistance, meaning the distance between the pump and the pool should be short (less than 3 meters) and the height differences in the piping should be kept to a minimum. This pump is less suitable for pools with higher resistance. The W’eau Maxi swimming pool pump is a quiet and energy-efficient option, which is ideal for those seeking efficiency and comfort.
For which pools?
The W’eau Maxi swimming pool pump 15 m³ is suitable for both above-ground and in-ground pools with a capacity of up to a maximum of 60,000 liters. This pump is perfect for situations with short piping and low to medium resistance, where the distance between the pool and the pump is small. For pools with high resistance (long distances or significant height differences), the pump offers less than optimal performance.
Functions and features
This swimming pool pump is equipped with various features that contribute to the convenience and efficiency of its operation:
Self-priming: The pump can easily handle short distances and minor height differences, ensuring stable operation.
Frequency controller (optional): The pump is compatible with a frequency controller, which allows you to adjust the speed of the pump, helping to save energy.
Large filter basket: The pump includes a spacious filter basket with a transparent lid, making it easy to check whether the basket needs to be emptied.
Saltwater resistant: This pump is resistant to saltwater, making it suitable for pools that use salt instead of chlorine.
Thermal protection: The pump is equipped with thermal protection, which switches the pump off in the event of excessive temperatures or voltage, ensuring extra safety and a longer service life.
Connection and installation
The W’eau Maxi swimming pool pump 15 m³ is easy to connect with a 50 mm fitting. The set comes with a standard plug, making installation quick and simple. Thanks to its robust construction, this pump is durable and resistant to heavy loads and various weather conditions.
The W’eau Maxi swimming pool pump 18 m³ is a powerful, reliable pool pump perfectly suited for swimming pools with a capacity of up to 72,000 liters. This pump operates at a fixed speed and is designed for installation below the water level, ensuring simple and efficient operation. The W’eau Maxi swimming pool pump is built with high-quality materials, ensuring a long service life and excellent performance. The pump is particularly suitable for pools with low to medium resistance and is equipped with a self-priming function, meaning it can operate effectively even with slight height differences and short distances.
For which pools is the W’eau Maxi suitable?
This pool pump performs best in pools with low to medium resistance. This means the distance between the pump and the pool should be short (less than 3 meters), and the piping should have minimal height differences. The W’eau Maxi pool pump is ideal for pools up to 72,000 liters, and thanks to its large capacity of 18 m³ per hour, the pool water remains consistently clean and fresh.
Maximum pool capacity:
Low resistance: 72,000 liters
Medium resistance: 60,000 liters
High resistance: 36,000 liters
Functions of the W’eau Maxi 18 m³ pool pump
The W’eau Maxi 18 m³ pool pump offers several features that significantly facilitate the maintenance of your pool:
Self-priming: This allows the pump to easily handle short distances and small height differences.
Frequency controller: The pump can be connected to a frequency controller, meaning the pump speed can be easily adjusted to save energy and increase efficiency.
Large filter basket: The pump is equipped with a spacious filter basket, meaning you have to empty it less often. The transparent lid of the filter basket makes it easy to see when it is full and needs emptying.
Thermal protection: The pump is equipped with thermal protection, meaning it shuts off automatically if the voltage or temperature becomes too high.
Saltwater resistant: This pool pump is also suitable for saltwater pools.
Simple installation
The W’eau Maxi pool pump 18 m³ comes with a standard plug and has a 50 mm connection, making it easy to connect. The Plug & Play installation makes it very user-friendly. This pump is ready for immediate use after installation and can be connected to existing piping without much effort.
The W’eau Maxi swimming pool pump 18 m³ is a reliable and efficient choice for your swimming pool, designed to ensure clean and fresh water effortlessly while keeping your energy costs low.
The W’eau Maxi swimming pool pump 8 m³ is a reliable and efficient choice for maintaining smaller swimming pools. This pump is designed for pools up to a maximum of 24,000 liters and offers fixed-speed performance, perfect for pools with low to medium resistance. Thanks to its robust construction and efficient operation, the W’eau Maxi swimming pool pump ensures that the water in your pool remains continuously fresh and clean, without compromising on energy consumption.
For which pools?
The W’eau Maxi 8 m³ swimming pool pump is ideal for pools up to a maximum of 24 m³. The unit is designed for pools with low resistance, which means the pump performs best when the distance between the pool and the pump is short (less than 3 meters) and there are no significant height differences. This makes the pump perfect for compact and well-designed pool installations where resistance is minimal.
Maximum pool volume:
Low resistance: 28 m³
Medium resistance: 24 m³
High resistance: 0 m³
Features of the W’eau Maxi 8 m³ swimming pool pump
The W’eau Maxi 8 m³ offers various features that make pool maintenance simple:
Self-priming: This feature allows the pump to operate efficiently even with small height differences and short distances.
Large filter basket: With the spacious filter basket, you need to empty it less often, and thanks to the transparent lid, you can easily check when the filter basket is full.
Frequency controller: The pump can be connected to a frequency controller to allow the pump to operate at different speeds, which contributes to energy savings and increased efficiency.
Thermal protection: The pump is equipped with thermal protection that automatically shuts off the motor in the event of overheating or excessive voltage load.
Saltwater resistant: Suitable for use in saltwater pools, which further increases the durability and versatility of this pump.
Installation and connection
The W’eau Maxi 8 m³ swimming pool pump comes with a standard 50 mm connection and a plug, making the pump easy to connect. This Plug & Play pump can be used immediately after installation, without any hassle with complex connections or additional equipment.
The W’eau Maxi 8 m³ swimming pool pump is a powerful and energy-efficient solution for filtering and maintaining smaller swimming pools, designed for ease of use and operational efficiency.
13 in stock
Ordered before 10:00 PM, shipped today
With W'eau Metal Clean, you prevent deposits of iron, copper, and other minerals in your spa. Use W'eau Metal Clean with every spa water change to neutralize minerals and prevent staining. The product reacts with any metal contamination before it has a chance to form unsightly stains.
Instructions for use W'eau Metal Clean
Turn off the filter system
Add 250 ml of W'eau Metal Clean to the water (per tub) and distribute evenly
Turn on the filter system and let it run for at least 30 minutes
Safety instructions W'eau Metal Clean
Never add the product while people are in the spa. Always use gloves. Keep the product out of the reach of children and store it in a closed container in a well-ventilated area. Always read the safety instructions on the packaging.
Features W'eau Metal Clean
Liquid form
Content: 500 ml
20 in stock
Ordered before 10:00 PM, shipped today
With W'eau Metal Clean, you prevent the buildup of iron, copper, and other minerals in your spa. Use W'eau Metal Clean every time you refresh your spa water to neutralize minerals and prevent staining. The product reacts with any metal contamination before it has the chance to form unsightly marks.
Instructions for W'eau Metal Clean
Turn off the filter system
Add 250 ml of W'eau Metal Clean (per tub) to the water and distribute evenly
Turn on the filter system and let it run for at least 30 minutes
Safety instructions for W'eau Metal Clean
Never add the product while people are in the spa. Always wear gloves. Keep the product out of reach of children and store it in a closed container in a well-ventilated area. Always read the safety instructions on the packaging.
Features of W'eau Metal Clean
Liquid form
Content: 500 ml
30 in stock
Ordered before 10:00 PM, shipped today
W’eau Metal Net is a powerful liquid product specially developed to effectively remove iron, lime, and other metals such as rust from pool water. It is ideal for swimming pools filled with groundwater, where an increased concentration of metals often occurs. By using Metal Net, you prevent discoloration of the pool water and keep the water clear and inviting. The product can be used both when first filling the pool and preventively throughout the season.
The W’eau MFV-17 variable sand filter set is an innovative solution for pool maintenance. This filter set is equipped with a variable speed pool pump, meaning you can easily adjust the speed of the pump to the needs of your pool. This ensures that the pump only runs at full power when necessary, which saves energy and results in lower costs. With a maximum capacity of 8 m³ per hour, the VPP-450 is perfectly suited for swimming pools up to 36,000 liters, effectively removing all dirt particles for clean and clear water.
The 6-way valve makes it easy to switch between different functions, such as filtering, backwashing, and rinsing. The filter vessel is made of sturdy polyethylene (PE) reinforced with polyester, making it resistant to high pressure and intensive use. This sand filter set comes with a self-priming pump, which means the pump automatically draws in water for optimal operation. The VPP-450 is ideal for both above-ground and built-in pools and is delivered Plug & Play, complete with plug and coupling for easy installation.
Saving costs with a variable pump
The W’eau MFV-17 uses a variable speed pool pump, allowing you to adjust the pump speed yourself. This ensures that the pump only operates at full power when truly necessary, which saves energy and reduces operating costs. The pump consumes less power and provides efficient filtration of the pool water.
Functions of the 6-way valve:
Filter: Water flows from top to bottom through the sand bed, removing dirt and impurities.
Backwash: Clean the sand bed by reversing the water flow to remove accumulated dirt.
Rinse: Flush out dirty water after backwashing, so the filter is ready for use.
Close: Closes all inlets and outlets when the filter is not in use.
Waste: Drains pool water directly into the sewer, for example to lower the water level.
Recirculate: Allows water to circulate without passing through the filter, ideal for chemical treatments such as algae control.
Summary:
The W’eau MFV-17 variable sand filter set offers a smart and energy-efficient solution for maintaining your pool. With its variable pump, generous capacity, and convenient 6-way valve, this set ensures efficient cleaning for pools up to 36,000 liters. This set is easy to install and ideal for intensive use in both above-ground and built-in swimming pools.
With the W'eau MFV-17 Variable Sand Filter Set 8 m³/h + Full Inverter 13.5 kW – Up to 36 m³, you choose a complete and professionally curated technical package that allows you to efficiently filter and energy-efficiently heat your swimming pool. This complete installation is specifically designed for swimming pools up to 36,000 liters and includes all essential components for reliable, durable, and easy-to-install pool technology.
The foundation of this technical set is the W'eau MFV-17 variable sand filter set with a design flow rate of 8 m³/h. Thanks to the variable pool pump, the system always operates at the most efficient speed. This allows you to save significantly on energy costs while the pool water remains continuously clear and clean. The powerful self-priming pump is suitable for both above-ground and built-in pools and performs excellently, even in installations with higher resistance. The sand filter features a durable 6-way valve that allows you to easily filter, backwash, rinse, circulate, drain, and close.
For a pleasant water temperature, this technical set is equipped with the W'eau Full Inverter 13.5 kW swimming pool heat pump. Thanks to Full Inverter technology, the heat pump automatically adjusts its compressor and fan speed to the heat demand of the pool. As a result, the pool heats up faster, the temperature remains stable, and energy consumption is significantly reduced compared to traditional on/off heat pumps.
To complete the installation, this technical set comes with a Deluxe Bypass Kit, 12 meters of 50 mm PVC flexible hose, and sufficient filter glass for the sand filter. With the bypass, you can easily regulate the ideal water flow through the heat pump, ensuring it always performs optimally. Furthermore, the filter glass provides finer filtration than traditional filter sand, capturing dirt particles more effectively and keeping the pool water crystal clear for longer.
All components are carefully matched, so you do not have to search for individual parts yourself. You receive one complete package that allows you to get started immediately. This makes the installation simpler, more reliable, and often more cost-effective than purchasing all components separately.
This complete technical set is ideal for both above-ground and inground pools up to 36 m³ and offers years of reliable performance, low energy consumption, and optimal swimming comfort.
Package contents
W'eau MFV-20 Variable Sand Filter Set – 8 m³/h
W'eau Full Inverter swimming pool heat pump – 13.5 kW
Loose cable with plug (from 0.75 kW)
W'eau Full Inverter heat pump protective cover
W’eau vibration dampers for heat pumps
Bypass kit for heat pump basic
W’eau Heater Cleaner heat pump cleaner
PVC Flexible hose 50 mm – 12 meters
2 × Filter glass fine – 20 kg
The W’eau MFV-20 variable sand filter set is an advanced solution for pool maintenance, designed to be both efficient and energy-saving. This filter set is equipped with a variable pool pump, allowing you to easily adjust the pump speed to suit your pool's needs. This means the pump only performs optimally when necessary, which significantly reduces energy consumption and costs. The VPP-500 offers a maximum capacity of 12 m³ per hour, making it ideal for pools up to 48,000 liters. This powerful system effortlessly removes dirt particles from the water, ensuring a fresh and clean pool.
The sand filter set is equipped with a 6-way valve, which allows you to switch between different functions, such as filtering, backwashing, and rinsing. The filter tank is made of sturdy polyester-reinforced polyethylene (PE), making it resistant to high pressure and demanding conditions. The VPP-500 is fully self-priming, making it suitable for heavier applications and effortless to set up thanks to its Plug & Play design.
Cost savings thanks to the variable pool pump
The W’eau MFV-20 distinguishes itself through its variable pool pump, allowing you to optimize energy consumption. By adjusting the pump to the required capacity, unnecessary energy use is avoided and you save significantly on energy costs.
6-way valve functions:
Filter: Water flows from top to bottom through the sand bed, removing dirt and impurities.
Backwash: The sand bed is rinsed in the opposite direction to remove accumulated dirt.
Rinse: Flushes away dirty water after backwashing to prepare the filter for reuse.
Close: Closes all filter inlets and outlets when not in use.
Waste: Drains pool water directly into the sewer.
Circulate: Allows water to circulate without passing through the filter, ideal for chemical treatments such as algae control.
Summary:
The W’eau MFV-20 variable sand filter set offers an advanced and energy-efficient solution for pools up to 48,000 liters. With its variable pump, generous capacity, and efficient filtration via the 6-way valve, this set is ideal for intensive use in both above-ground and built-in pools. Thanks to the Plug & Play design, installation is simple, allowing you to quickly enjoy clean and clear pool water.
With the W'eau MFV-20 Variable Sand Filter Set 12 m³/h + Full Inverter 17.5 kW – Up to 48 m³, you are choosing a complete and professionally assembled technical package that optimally filters and efficiently heats your pool. This complete installation has been specially designed for swimming pools of up to 48,000 liters and contains only high-quality components that are perfectly matched to one another.
The foundation of this technical set is the W'eau MFV-20 variable sand filter set with a maximum pump capacity of 12 m³/h. Thanks to the energy-efficient variable pool pump, the system always runs at the ideal speed. This means you consume significantly less power than with a traditional pool pump, while the pool water remains continuously clear and clean. The robust sand filter features a durable polyester-reinforced filter vessel and a 6-way valve with all necessary filter functions for easy maintenance and optimal performance. The set is also supplied Plug & Play with connection material for 50, 38, and 32 mm connections.
For a pleasant water temperature, this technical set is equipped with the W'eau Full Inverter 17.5 kW pool heat pump. Thanks to Full Inverter technology, the heat pump automatically adjusts its output based on the pool's heating demand. As a result, the pool is heated more quickly, the temperature remains stable, and energy consumption is significantly lower than with traditional on/off heat pumps.
To complete the installation, this technical set comes with a Bypass Kit, PVC Flex Hose 50 mm, and sufficient filter glass for the sand filter. With the bypass kit, you can easily regulate the ideal water flow through the heat pump, ensuring it always operates at maximum efficiency. The included filter glass provides finer filtration than traditional filter sand, capturing dirt particles more effectively and keeping the pool water crystal clear for longer.
Because all parts are perfectly matched in advance, you do not need to search for individual components yourself. You receive one complete package that allows you to get started immediately. This makes the installation simpler, more reliable, and often more cost-effective than purchasing all the parts separately.
This complete technical set is suitable for both above-ground and inground pools up to 48 m³ and offers years of reliable performance, low energy consumption, and maximum swimming comfort.
Package contents
W'eau MFV-20 Variable Sand Filter Set – 12 m³/h
W'eau Full Inverter pool heat pump – 17.5 kW
Loose cable with plug (from 0.75 kW)
W'eau Full Inverter heat pump protective cover 89 x 42 x 57 cm
W’eau vibration dampers for heat pumps
Bypass kit for basic heat pump
W’eau Heater Cleaner heat pump cleaner
PVC Flex Hose 50 mm – 12 meters
4 × Filter glass fine – 20 kg
This W’eau MFV-24 variable sand filter set is a true breakthrough in pool maintenance. It is the first sand filter set to use a variable speed pool pump. This saves you money and keeps your pool water wonderfully clean! In addition, the sand filter set features all the functions you need thanks to the 6-way valve. Due to its extremely robust material, this fully self-priming sand filter set is suitable for heavier applications. With a capacity of 16 m3 per hour and a maximum content of 85 kg, it removes all dirt from pools up to 64,000 litres. So, go ahead and splash around in a clean pool!Save money with a variable pool pumpWhat makes the W’eau VPP-650 so unique? Sand filter sets from the W’eau VPP series are the first sets on the market to use a variable speed pool pump. This allows you to easily set the speed of the pump, so the W’eau VPP-650 variable sand filter set only performs optimally when it really needs to. As a result, the sand filter set does not consume unnecessary energy. This means lower energy costs for you, keeping more money in your pocket!Use and connection of the sand filter setThere are a few important features you should be aware of when purchasing a W’eau MFV-24 variable sand filter set. The sand filter set is supplied Plug & Play, including a plug and coupling. This makes the set very easy to connect and ready for immediate use. The connection of the sand filter set is 50 mm. You may need additional adapters to make the connection fit your piping. When connecting the W’eau MFV-24, always keep in mind that placing it above the water line provides the best results.
With the W'eau MFV-24 Variable Sand Filter Set 16 m³/h + Full Inverter 21 kW – Up to 64 m³, you are choosing a complete and professionally assembled technical package for swimming pools up to 64,000 liters. This high-quality set combines an energy-efficient variable sand filter system with a powerful Full Inverter heat pump, including all necessary materials for a quick and professional installation. This allows you to enjoy crystal clear and wonderfully heated pool water throughout the entire swimming season.
The foundation of this technical set is the W'eau MFV-24 variable sand filter set with a maximum pump capacity of 16 m³/h. Thanks to the variable speed, the pump never runs harder than necessary. This leads to significant energy cost savings, reduces noise levels, and increases the pump's service life. Furthermore, the sand filter features a robust polyester-reinforced filter vessel and a 6-way valve with all necessary filter functions.
For an optimally heated pool, this technical set is equipped with the W'eau Full Inverter 21 kW swimming pool heat pump. Thanks to Full Inverter technology, the heat pump automatically adjusts its output based on the heating demand. As a result, the pool reaches the desired temperature faster, while energy consumption is significantly lower than with traditional heat pumps. The integrated Wi-Fi module allows for smartphone control, and the titanium heat exchanger is suitable for both chlorine and saltwater pools.
To complete the installation, this technical set is supplied with a Deluxe Bypass Kit, 12 meters of PVC flex hose (50 mm), and sufficient filter glass for the sand filter. Thanks to the bypass kit, you can easily regulate the ideal water flow through the heat pump, ensuring it always operates at maximum efficiency. The included filter glass provides finer filtration than traditional filter sand, keeping the pool water clear for longer and requiring less maintenance.
Because all parts are carefully matched, you don't have to search for individual components yourself. You receive a complete technical set that allows you to get started right away. This makes the installation simpler, more reliable, and often more cost-effective than purchasing all parts separately.
This complete technical set is ideal for both large above-ground pools and inground pools up to 64 m³ and offers years of reliable performance, low energy consumption, and maximum swimming comfort.
Package contents
W'eau MFV-24 Variable Sand Filter Set – 16 m³/h
W'eau Full Inverter swimming pool heat pump – 21 kW
Separate cable with plug (from 0.75 kW)
W'eau Full Inverter heat pump protective cover 89 x 42 x 57 cm
W’eau vibration dampers for heat pumps
Bypass kit for basic heat pump
W’eau Heater Cleaner heat pump cleaner
PVC Flex hose 50 mm – 12 meters
6 × Filter glass fine – 20 kg
2 × Filter glass coarse – 20 kg
