The Universal Bypass Kit for heat pumps is the ideal solution for an optimal installation of your swimming pool heat pump. Heat pumps require a specific flow rate and pressure to achieve their maximum efficiency. With this complete bypass kit, you can easily regulate the water pressure and flow passing through the heat pump. This allows you to reduce energy consumption and increase the efficiency of your heat pump.
The kit contains everything you need for a correct installation, including sufficient PVC pipes and pool hoses. This makes connecting the heat pump quick and problem-free. Thanks to this universal kit, you are fully prepared to ensure your heat pump functions optimally.
Set contents:
1x PVC glue
1x PVC cleaner (125 ml)
2x Pool hose (38 mm, 1.5 meters each)
2x PVC elbow (50 mm)
2x PVC T-piece (50 mm)
3x PVC ball valve (50 mm)
6x PVC pipe (50 mm, 10 cm)
6x Stainless steel hose clamp (32 x 44 mm)
6x Hose barb (50 x 38/32 mm)
With this universal bypass kit, you are assured of an effective and user-friendly installation for your heat pump, helping you save energy and keep your pool performance optimal.
The W’eau winterizing liquid is an essential product for protecting your pool during the winter months. This powerful agent prevents the formation of algae and ensures that the pool water does not turn green. In addition, it helps prevent limescale buildup on the pool edges, keeping your pool looking fresh and clean come spring. What makes this winterizing liquid special is that it remains effective even when the pH levels of the water are not perfectly balanced. Proper winter preparation with this liquid ensures you can immediately enjoy clear pool water as soon as temperatures rise again.
The amount of winterizing liquid you need depends on the size of your pool. For powerful performance, we recommend 1 liter of liquid per 10m³ of water, although a standard dosage of 1 liter per 25m³ is often sufficient. For the best protection, perform this treatment twice per winter so that the pool remains well-protected throughout the entire winter season.
The winterizing liquid also has a long shelf life with no expiration date, so you can safely use any remainder the following winter.
Required amount of winterizing liquid (per winter):
15m³ pool: 3 liters
30m³ pool: 6 liters
45m³ pool: 9 liters
60m³ pool: 12 liters
75m³ pool: 15 liters
90m³ pool: 18 liters
Instructions for use of winterizing liquid:
Remove all visible debris from your pool.
Perform a shock treatment with chlorine shock to disinfect the water thoroughly.
Wait 24 hours after the chlorine treatment.
Add 1 liter of winterizing liquid per 10m³ and distribute it evenly throughout the pool.
Midway through winter, add another 1 liter of winterizing liquid per 15m³ of water.
It is not necessary to let the pool pump circulate after adding the liquid. Always follow safety instructions and wear gloves while using the winterizing liquid.
Safety instructions:
Always add the liquid to the water, never the other way around.
Wear protective gloves during use.
Store the liquid in a safe, dry, and cool place.
Rinse empty containers thoroughly with pool water before disposal.
The pool is not suitable for use while the liquid is active.
Features of the winterizing liquid:
Liquid form, easy to add to the pool water.
Suitable for use in all pools, including saltwater pools.
Works well in combination with other chemicals.
Prevents green water and limescale.
Effective even with off-balance pH levels.
With W’eau winterizing liquid, your pool is ready to get through the winter and you are guaranteed clean and clear water in the spring!
This Bypass kit is a must-have for the optimal functioning of your swimming pool heat pump. A heat pump requires specific water pressure and flow to operate efficiently. Without proper bypass control, the flow through the heat pump can be too high or too low, which negatively impacts performance and may even cause damage to the installation. With this Bypass kit, you can precisely regulate the water flow, extending the lifespan of the heat pump and minimizing energy consumption. This results in better efficiency and lower energy costs.
How does a bypass kit work? A bypass kit acts as a regulator between the filtration system and the heat pump. It allows you to adjust the amount of water flowing through the heat pump, depending on pressure and temperature requirements. This is especially useful when the heat pump receives too much or too little water, which can lead to inefficient heating or even technical problems.
Package contents:
1x N-30 PVC glue 125ml: For firmly and watertight bonding of the components.
1x Griffon Cleaner 125ml: For cleaning and degreasing PVC pipes and couplings for optimal adhesion.
2x PVC T-piece 50 mm 16bar: To effectively connect the pipes to the heat pump and the filtration system.
3x PVC ball valve 50 mm 16bar: For precise control of the water flow.
4x PVC pipe 50 mm 10cm 10bar: Pipe sections for connecting the components.
4x Stainless steel hose clamp 32 x 44 mm: For secure attachment of the pipes.
4x ABS hose tail 50 x 32 mm: For a sturdy connection between the pipes and the heat pump.
With the Bypass Kit for Heat Pump - Basic, you ensure that your heat pump performs optimally, allowing you to enjoy efficiently and effectively heated swimming pool water all season long!
Enjoy deliciously warm swimming pool water for longer with the W’eau Mini Inverter 2.0 Plus swimming pool heat pump – 4.5 kW. This compact Full Inverter heat pump is specially developed for small to medium-sized pools and combines powerful performance with low energy consumption, quiet operation, and great ease of use.
With a heating capacity of up to 4.5 kW, this model is a great middle ground within the Mini Inverter 2.0 Plus series. The heat pump is ideal when you need just a bit more power than the 3 kW model offers, but do not want to place a large swimming pool heat pump next to your pool.
The built-in Full Inverter technology ensures that the compressor and fan automatically adjust their output based on the heat demand. As a result, the heat pump operates efficiently when high power is needed and scales back as soon as the pool is close to the desired temperature.
Full Inverter technology for lower energy consumption
A traditional on/off heat pump mainly operates at maximum power and switches off when the desired water temperature is reached. The W’eau Mini Inverter 2.0 Plus operates more intelligently.
When the pool water still needs significant heating, the heat pump can use a large portion of its available power. As the water gets closer to the set temperature, the inverter automatically lowers the speed.
This results in more even heating and has two major advantages: lower energy consumption and less noise.
Especially once the pool is up to temperature, the heat pump can continue to run at a lower capacity for long periods to maintain the temperature efficiently.
Heating capacity of 4.5 kW
Under favorable conditions, the W’eau Mini Inverter 2.0 Plus provides a heating capacity of 1.2 to 4.5 kW. At an outside temperature of 15°C, the heating capacity is approximately 0.84 to 3.2 kW.
This makes the 4.5 kW version suitable for small to medium-sized swimming pools.
For the normal swimming season from approximately May to August, we recommend this model for pools up to approximately 12 m³. If you wish to use the heat pump during the longer season from April to October, a pool of up to approximately 9 m³ is a better guideline.
Actual performance always depends on factors including outside temperature, wind, desired water temperature, pool location, and the use of a good pool cover.
Highly energy-efficient with a COP of up to 10
The W’eau Mini Inverter 2.0 Plus extracts the majority of its heat from the outside air. As a result, it can deliver significantly more heat to the pool water than it consumes in electricity.
Under favorable conditions, the COP can reach up to 10.
This means that under optimal conditions, the heat pump can produce up to approximately 10 kW of heat for every 1 kW of electrical energy used.
At an outside temperature of 26°C, the COP is between approximately 5.5 and 10. At an outside temperature of 15°C, it is between approximately 4.4 and 6.0.
This makes the Mini Inverter 2.0 Plus an attractive solution if you want to heat your pool regularly without using a traditional electric pool heater.
Heating and cooling
The W’eau Mini Inverter 2.0 Plus can not only heat, but also actively cool.
For heating, the desired water temperature can be set between 15°C and 40°C. In cooling mode, the setting range is between 8°C and 28°C.
During spring and autumn, you use the heat pump to keep the pool pleasantly warm. If the pool becomes too warm during a hot summer period, you can use the cooling mode to lower the water temperature.
Built-in Wi-Fi
With the integrated Wi-Fi module, you can easily control the W’eau Mini Inverter 2.0 Plus via your smartphone.
This allows you to, for example, adjust the desired water temperature or manage the heat pump settings without having to walk to the device every time.
Would you prefer to control the heat pump directly? You can of course do that via the control panel on the unit itself.
Quiet operation
A heat pump is often placed close to the pool, terrace, or house. A low noise level is therefore important.
The Full Inverter technology helps with this. As soon as less heating power is required, the compressor and fan can operate at a lower speed.
The noise level of the 4.5 kW version is around 40 to 46 dB(A) at a distance of 1 meter. At a distance of 10 meters, this is approximately 25 to 31 dB(A).
This allows the Mini Inverter 2.0 Plus to combine significant heating power with relatively quiet operation.
Automatic flow switch
The built-in flow switch checks whether enough pool water is flowing through the heat pump.
When the filter pump is switched on and there is sufficient water circulation, the heat pump can operate automatically. If the water circulation stops, the system detects this.
This makes the heat pump particularly user-friendly and ensures that the heat pump's operation can easily be combined with the pool's filter system.
Titanium heat exchanger
The W’eau Mini Inverter 2.0 Plus features a titanium heat exchanger. The pool water flows through this heat exchanger and absorbs the heat from the heat pump.
Titanium is highly resistant to pool water and also makes this heat pump suitable for pools that use a saltwater system or salt electrolysis.
This allows you to use the Mini Inverter 2.0 Plus with both traditionally treated pool water and saltwater pools.
Handy 32/38 mm connections
The heat pump is equipped with 32/38 mm connections. These are common hose sizes for above-ground pools and compact pool installations.
This makes it easy to incorporate the heat pump into an existing installation.
The heat pump is placed after the filter installation. The filtered pool water flows through the heat exchanger, is heated, and then returns to the pool.
For filter pumps with a high water flow rate, we recommend using a bypass. This allows you to precisely regulate how much water is directed through the heat pump.
Minimum 2 m³ per hour water flow
For proper operation, the 4.5 kW version requires a water flow of approximately 2 m³ per hour.
It is therefore important that the pool pump being used has sufficient capacity.
Insufficient water flow can cause the heat pump to malfunction. With a very powerful filter pump, the flow can be regulated using a bypass.
No heavy-duty power required
Despite the heating capacity of 4.5 kW, you do not need 380V heavy-duty power for this heat pump.
The W’eau Mini Inverter 2.0 Plus operates on 220-240V / 1 phase / 50 Hz and can therefore be connected to a 230V outlet within a suitable electrical installation.
The maximum electrical power consumption is approximately 1.20 kW and the maximum current is approximately 6.2 amperes.
Operates down to -7°C outside temperature
The W’eau Mini Inverter 2.0 Plus has a wide operating temperature range of approximately -7°C to 43°C.
This allows the heat pump to function even at relatively low outside temperatures, making it suitable for significantly extending the swimming season.
Please keep in mind that an air/water heat pump remains dependent on the outside temperature. At 25°C outside air, it can heat more efficiently and powerfully than when it is, for example, 10°C outside.
For use in early and late season, it is therefore extra important to cover the pool well at night.
Ideal in combination with a pool cover
A good heat pump is only one part of an energy-efficient pool installation. A large portion of heat loss occurs via the water surface.
Always use a suitable cover when not swimming.
This keeps the accumulated heat in the pool longer and means the W’eau Mini Inverter needs to run at high power less often. This not only results in lower energy consumption but also helps to get the pool up to temperature faster and keep it there.
Compact size
Despite its heating capacity, the W’eau Mini Inverter 2.0 Plus is a compact heat pump. This makes it particularly suitable for above-ground pools and gardens where you do not want to place a large heat pump installation.
The compact construction makes it easier to find a suitable spot next to the pool installation.
When placing it, always ensure there is sufficient free space around the heat pump. Both the air intake and the horizontal air outlet must remain completely unobstructed.
Smart choice for pools up to approximately 12,000 liters
The W’eau Mini Inverter 2.0 Plus swimming pool heat pump – 4.5 kW is an excellent choice if you want to heat a compact pool in an energy-efficient way while benefiting from modern inverter technology.
With a recommended pool volume of up to approximately 12,000 liters during the normal swimming season, this 4.5 kW version is a great middle ground between the smaller 3 kW version and the more powerful models in the series.
Thanks to the combination of Full Inverter technology, Wi-Fi, a COP of up to 10, a titanium heat exchanger, heating and cooling modes, and a standard 230V connection, you are getting a complete and user-friendly swimming pool heat pump.
This way, you no longer have to wait for those few truly hot summer days, but can enjoy comfortably heated pool water for a much larger part of the swimming season.
If you want to enjoy your above-ground pool for longer, the W’eau Mini Power 4kW heat pump is the solution. It allows you to heat the pool water and extend the swimming season from May through August. A user-friendly plug & play model that can heat your pool up to 16,000 liters. Moreover, this improved model features a lower noise level and higher efficiency.
Perfect for your above-ground pool
This heat pump works very simply. No complicated programs; the heat pump is either on or off. It always operates at the same power level. Less efficient, but it makes it an affordable model for an above-ground pool. The heat pump has a compact size and takes up little space. Want to move it? That’s very easy. Due to the technology used, the heat pump works even with a low flow rate. This makes it ideal for above-ground pools, and it is suitable for pool pumps with a flow rate starting from 2 m³/h.
Convenience thanks to plug & play
You don’t need any technical knowledge to connect the heat pump. This heat pump works on a plug & play basis. Connect the heat pump to your pool and pump using the included 32 or 38 mm couplings. Then, plug it into the power outlet and the heat pump will begin heating your pool. Unlike many other models, you do not need a bypass kit for this heat pump. The 32/38 mm couplings are the standard sizes for above-ground pools from brands like Intex, Bestway, and EXIT.
Reliable operation thanks to flow switch
This Mini Power heat pump is incredibly easy to use with an above-ground pool thanks to the built-in flow switch. As a result, the heat pump automatically starts (or resumes) operating when the pool pump turns on. Along with the W’eau Mini Inverter, the W’eau Mini Power is the only mini heater on the market with this flow switch.
Efficiency and consumption Mini Power 4kW
How much kW of heat does the pump generate from 1 kW of energy?
Temperature
Heat output
15°C
4.20 out of 1
26°C
5.20 out of 1
The vibration dampers for heat pumps are specially designed to minimize the vibrations of your heat pump and ensure quieter operation. These 60 cm mounting beams are made of high-quality vibration-damping rubber and feature a built-in aluminum profile, ensuring stability and durability. With the included mounting bolts and nuts, you can easily mount your heat pump onto these beams. This product is suitable for heat pumps with a maximum depth of 55 cm.The set contains two beams that work together to provide maximum vibration absorption, significantly reducing the noise output of your heat pump. Perfect for anyone looking to reduce the noise disturbance from their heat pump while simultaneously extending the lifespan of the equipment.
The W'eau Spa Eucalyptus Scent offers a refreshing, invigorating fragrance experience that transforms your spa into a wellness paradise. Eucalyptus has been prized for centuries for its purifying and healing properties, especially when it comes to respiratory issues. The invigorating scent works deeply on the airways and helps you breathe more freely, making it ideal for moments when you are feeling less than fit due to a cold, flu, or sinus problems. It purifies the air and provides an energy boost, leaving you feeling refreshed and invigorated after every spa session.
In addition to its benefits for the respiratory system, eucalyptus also has a soothing effect on tired muscles, making it a perfect choice for recovery after exercise or when you are looking for extra vitality. This eucalyptus scent is completely foam-free and contains no dyes, which means it is safe for both the water and the technical components of your spa. The fragrance dissolves completely in the water without leaving any traces behind.
Use: Add a small amount (approximately one capful) to your spa and experience the deep purifying effect of eucalyptus. Ideal for use when you are feeling a bit under the weather or simply want to relax.
Conclusion:
Each of the W'eau scents offers a unique aromatherapy experience specifically designed for spas. Whether you are looking for relaxation, refreshment, romance, or recovery, W'eau fragrances help you make the most of your spa experience. Each of the scents is made from high-quality essential oils, is completely foam-free, and is free of dyes, ensuring a safe and long-lasting fragrance experience without having to worry about water quality or spa equipment.
If you want to enjoy your above-ground pool for longer, the W’eau Mini Power 5kW heat pump offers the perfect solution. It allows you to heat the pool water and extend the swimming season from May through August. A user-friendly plug & play model that can heat your pool up to 20,000 liters. Moreover, this improved model features a lower noise level and higher efficiency.
Perfect for your above-ground pool
This heat pump is wonderfully simple to use. No complex programs; the heat pump is either on or off. It always operates at the same power level. While less efficient, this makes it an affordable model for above-ground pools. The heat pump has a compact design and takes up very little space. Need to move it? It's very easy to do. Due to the technology used, the heat pump works even with low water flow. This makes it ideal for above-ground pools and suitable for pool pumps with a flow rate starting at 2.5 m³/h.
Convenience thanks to plug & play
You don't need any technical knowledge to connect the heat pump. This heat pump works on the plug & play principle. Simply connect the heat pump to your pool and pump using the included 32 or 38 mm couplings. Then, plug it into the power outlet and the heat pump will begin heating your pool. Unlike many other models, you do not need a bypass kit for this heat pump. The 32/38 mm couplings are the standard sizes for above-ground pools from brands such as Intex, Bestway, and EXIT.
Reliable operation thanks to flow switch
This Mini Power heat pump is incredibly easy to use with an above-ground pool thanks to the built-in flow switch. The heat pump automatically starts (or resumes) operation when the pool pump is switched on. Together with the W’eau Mini Inverter, the W’eau Mini Power is the only mini heater on the market with this flow switch.8721202563309
Efficiency and consumption of the Mini Power 5kW
How much kW of heat does the pump extract from 1 kW of energy?
Temperature
Heat output
15°C
4.18 out of 1
26°C
5.17 out of 1
The W'eau TA- Alkalinity 3 kg is an essential product for maintaining the chemical balance of your swimming pool water. This product helps to lower the total alkalinity (TA) of the water, which is important for keeping the pH level stable. A stable pH level ensures that your pool water is less sensitive to external factors such as weather changes and the use of chemicals. This extends the lifespan of your pool and makes it more pleasant to swim in.With this 3 kg package, you can easily adjust the alkalinity by adding the powder to water in a bucket and then distributing it evenly throughout the pool. The product dissolves quickly and ensures that the pH level remains stable for longer.The W'eau TA- Alkalinity 3 kg is a reliable choice for anyone who wants to keep swimming water healthy and clear by maintaining the correct alkalinity.
Are you looking for an accurate, manual tester for your swimming pool or spa water? Then the W’eau DPD test kit is exactly what you need! This test kit is specially designed for measuring free chlorine, pH level, and alkalinity – something many other DPD kits often don't do. Using tablets and a visual color comparison, you will know the status of your water quality within seconds.
The W’eau DPD test kit works simply: fill the tester with water, add the corresponding test tablets (DPD No.1 for chlorine, Phenol Red for pH, and an alkalinity tablet), close it with the lid, shake well, and read the color after 20 seconds. This way, you immediately know which levels are on target and where you might need to make adjustments with chemicals.
The W’eau DPD test kit is ideal for anyone looking for a reliable, simple, and affordable way to regularly check their swimming pool or spa water. Thanks to the additional alkalinity test and clear reading, this is a step up from standard test strips.
The W'eau Spa Pine Scent brings the fresh, invigorating power of nature to your spa. This powerful pine scent, known for its healing and refreshing properties, is ideal for relieving respiratory issues such as colds, hay fever, and general airway irritation. The pine scent stimulates the respiratory tract, allowing you to breathe more freely and feel fitter. In addition to its respiratory benefits, the pine scent also helps to relieve muscle and joint pain, including rheumatic complaints. This makes it an excellent choice for those looking for relief after intense physical exertion or when experiencing chronic pain.This pine scent is completely foam-free and contains no colorants, making it a safe and hassle-free addition to your spa. It does not foam and dissolves completely in the water, which means it leaves no residue and has no effect on the water quality or the equipment of your spa. Made from high-quality essential oils, this scent offers a deep, pure aromatherapy experience that helps to revitalize body and mind.Use: Pour a small amount (about one capful) into your spa water and let the fresh pine scent stimulate your senses. Perfect for moments of invigoration and healing.Conclusion:The W'eau scents each offer a unique aromatherapy experience specifically designed for spas and hot tubs. Whether you are looking for relaxation, refreshment, romance, or recovery, W'eau scents help you get the most out of your spa experience. Each of the scents is made from high-quality essential oils, is completely foam-free, and is free of colorants, ensuring a safe and long-lasting fragrance experience without having to worry about water quality or spa equipment.
The W'eau Spa Lavender Scent is the ultimate choice for relaxation and tranquility in your spa. Lavender is famous for its calming properties and is often used to relieve stress, reduce anxiety, and combat insomnia. This lavender scent not only helps your body relax but also calms the mind, bringing you into a state of deep rest. Perfect for use after a long, stressful day or when you have trouble falling asleep.
Lavender also has benefits for the skin: it is known for its anti-inflammatory and soothing effects. Using lavender in your spa regularly can help alleviate skin irritation and calm stressed skin. This lavender scent is completely foam-free, meaning it leaves no foam or residue, and is free of dyes, making it completely safe for your spa and equipment.Instructions:Add one capful of lavender scent to your spa and immediately enjoy the relaxing and soothing aromas. Perfect for use after a long day or when you want to promote a deeper night's sleep. It settles both body and mind, making your spa experience seamlessly align with your need for calm and relaxation.
Conclusion:
The scents from W'eau each offer a unique aromatherapy experience specifically designed for spas. Whether you are looking for relaxation, refreshment, romance, or recovery, W'eau scents help you get the most out of your spa experience. Each of the scents is made from high-quality essential oils, is completely foam-free, and is free of dyes, ensuring a safe and long-lasting scent experience without having to worry about water quality or spa equipment.
Are your swimming pool water levels not quite right? With W’eau pH Plus powder, you can easily increase the pH value of your pool, so the water is perfectly balanced again. A correct pH value (between 7.2 and 7.6) ensures that chlorine works better, the water feels more comfortable, and you can enjoy crystal-clear pool water worry-free.
This 1 kg pack is ideal for above-ground pools or smaller built-in pools. Thanks to its powder form, the product dissolves quickly and almost completely in the water.
Instructions for use
Always measure the current pH value of your pool water first.
A good pH value is between 7.2 and 7.6.
Mix the correct amount of powder in a bucket of warm or pool water (see packaging for dosage).
Add the solution slowly and evenly to the pool.
Done – your water is balanced again!
Safety instructions
Always add the powder to water, never the other way around.
Never use simultaneously with other chemicals such as chlorine.
Store in a dry, cool, and safe place.
Always consult the safety instructions on the packaging before use.
👉 With W’eau pH Plus Powder 1 kg, you keep your pool water balanced and ensure optimal swimming comfort.
Do you want to enjoy your above-ground pool for longer and in more comfort? The W’eau Mini Power 20 heat pump – 3 kW is the perfect solution for warm swimming days from May to August. With its Plug & Play installation, compact design, and whisper-quiet operation, this heat pump is perfectly suited for pools up to 12,000 liters.
The Mini Power 20 is designed for simplicity: without complex settings, it reliably heats your pool water, even at a low flow rate starting from 2 m³/h. Thanks to the automatic flow switch, it turns itself on when your filter pump is running – you don't have to worry about a thing!
The pump works with standard 32/38 mm connections and is therefore directly compatible with most above-ground pools from brands like Intex, Bestway, and EXIT. Thanks to the robust titanium heat exchanger, it is even resistant to salt water.
The W'eau Spa Sensual Fragrance offers a luxurious and sensual scent experience that is perfect for romantic spa sessions or moments of self-care. This fragrance combines the relaxing effects of lavender, the refreshing properties of peppermint, and the harmonizing power of ylang-ylang. Together, these ingredients create a stimulating aroma that helps bring body and mind into balance, while simultaneously creating a romantic and serene atmosphere. This scent is ideal for sharing with a partner or for pampering yourself during an invigorating spa session.
The sensual fragrance is completely foam-free and contains no dyes, which means it has no harmful effects on your spa equipment or water quality. Thanks to the essential oils, a profound aromatherapy experience is created that is long-lasting.
Usage:Add a capful of Sensual fragrance to your spa and enjoy the refined and harmonious aromas. Perfect for moments of relaxation, romance, or self-indulgence when you want to stimulate your senses.
Conclusion:
The W'eau fragrances each offer a unique aromatherapy experience specifically designed for spas. Whether you are looking for relaxation, refreshment, romance, or recovery, W'eau fragrances help you get the most out of your spa experience. Each of the fragrances is made from high-quality essential oils, is completely foam-free, and is free of dyes, ensuring a safe and long-lasting scent experience without having to worry about water quality or spa equipment.
The W'eau Spa Relax Fragrance is designed for deep relaxation and recovery, ideal after a stressful day. This unique blend of scents offers a synergy of natural ingredients that help you unwind and reduce stress. Rosemary is known for its stimulating and anti-stress properties, while lavender provides calm and relaxation. Bergamot, cedarwood, and orange oil contribute to purifying your body and mind, giving you an all-encompassing sense of peace and well-being. This fragrance is perfect for those seeking a holistic spa experience that is restorative both physically and mentally.
This relaxing fragrance is completely foam-free and contains no dyes, meaning it has no negative impact on the water quality or the technical components of your spa. Thanks to the essential oils, it offers an intensive aromatherapy experience that is immediately noticeable.
Usage:Pour a capful of Relax fragrance into your spa or hot tub and let the combination of soothing and purifying aromas work on you. Ideal for moments of deep relaxation, especially after a stressful workday or if you are feeling overwhelmed.
Conclusion:
The W'eau fragrances each offer a unique aromatherapy experience specifically designed for spas and hot tubs. Whether you are looking for relaxation, refreshment, romance, or recovery, W'eau fragrances help you get the most out of your spa experience. Each of the scents is made from high-quality essential oils, is completely foam-free, and is free of dyes, ensuring a safe and long-lasting scent experience without you having to worry about water quality or spa equipment.
The W’eau Full Inverter heat pump protective cover is the ideal solution to extend the lifespan of your heat pump. This high-quality protective cover offers optimal protection against various weather conditions such as rain, snow, sleet, and freezing cold. By protecting your heat pump from dirt, dust, and other external influences, it remains in top condition, allowing you to enjoy wonderfully warm pool water for longer.
The protective cover is specially designed for the W’eau Full Inverter heat pumps with a capacity of 13.5 kW, 17.5 kW, and 21 kW. Thanks to its dimensions of 92 x 43 x 62 cm, the cover fits these models perfectly, protecting the pump against damage and wear. This protective cover is made of sturdy and durable material, making it resistant to the elements and ensuring a long lifespan.
It is important to remember that the heat pump must not be turned on while the cover is over it. This can damage both the heat pump and the protective cover. The cover is intended only as protection when the heat pump is not in use, especially during the winter months or when you are not using the pump for an extended period.
The W’eau Full Inverter heat pump protective cover is an essential accessory for protecting your heat pump against the effects of the weather. Thanks to the perfect fit for the W’eau Full Inverter models and the robust, weather-resistant materials, this cover ensures that your heat pump lasts longer and stays in top condition. The only thing you need to keep in mind is that the heat pump must be switched off when the cover is over it, and that you must properly prepare the heat pump before placing the cover.
Do you want to enjoy pleasant pool water even on less sunny days? With the W’eau Mini Inverter 2.0 Plus pool heat pump – 3 kW, you can easily extend your swimming season. This compact Full Inverter heat pump is specifically designed for smaller swimming pools and combines high efficiency with low energy consumption, quiet operation, and easy controls.
The 3 kW version is suitable for pools up to approximately 9,000 liters during the normal swimming season. If you want to use the heat pump over a longer season from April to October, a pool volume of up to approximately 6,000 liters is recommended. The heat pump can both heat and cool and operates in outdoor temperatures as low as -7°C.
Full Inverter technology
The most important difference between this heat pump and a traditional mini heat pump is the Full Inverter technology.
A traditional on/off heat pump works largely at full power and then switches off once the desired temperature is reached. In contrast, the W’eau Mini Inverter 2.0 Plus can automatically adjust its power output to the actual heat demand.
When the pool needs to be heated significantly, the heat pump delivers more power. Once the water approaches the set temperature, the power is throttled back.
This prevents the heat pump from working harder than necessary, resulting in lower energy consumption, less noise, and more uniform pool heating.
High efficiency with a COP of up to 9.5
The W’eau Mini Inverter 2.0 Plus extracts heat from the outside air and transfers it to the pool water via the heat exchanger. This allows the heat pump to produce a large amount of heat with relatively little electrical energy.
At an outside temperature of 26°C, the 3 kW model has a COP between 5.5 and 9.5. At 15°C, the COP is between 4.4 and 6.0.
A COP of 9.5 means the heat pump can operate very efficiently under favorable conditions. This energy-efficient operation is especially effective once the pool has reached the desired temperature and the inverter can throttle back.
Ideal for smaller pools
With a maximum heating capacity of 3 kW, this model is primarily intended for smaller pools and above-ground pools.
For the normal swimming season, a pool volume of up to approximately 9 m³ is recommended. If you want to heat the pool over a longer season, for example from April to October, a volume of up to approximately 6 m³ is a better guideline.
Actual performance depends on various factors, including outdoor temperature, desired water temperature, wind, pool placement, and the use of a cover.
A good pool cover is highly recommended. Significant heat can be lost through the water surface, especially at night.
Heating and cooling
The W’eau Mini Inverter 2.0 Plus does not just heat; it also features a cooling function.
Heating can be set between 15°C and 40°C. For the cooling function, the setting range is 8°C to 28°C.
This gives you plenty of control over the desired water temperature throughout the swimming season. You can heat the pool during cooler days and cool the water down during exceptionally hot periods.
Built-in Wi-Fi
The W’eau Mini Inverter 2.0 Plus features built-in Wi-Fi, allowing you to operate the heat pump via your smartphone.
You can, for example, adjust the desired water temperature and check settings without having to walk to the heat pump every time.
Of course, the heat pump can also be set directly via the control panel.
Very quiet operation
A major advantage of inverter technology is quiet operation. Because the compressor and fan can adjust their speed, the heat pump does not have to run at maximum power constantly.
The stated noise level is approximately 39 to 45 dB(A) at a distance of 1 meter. At a distance of 10 meters, this is around 24 to 30 dB(A), depending on the current power output.
This makes the W’eau Mini Inverter 2.0 Plus highly suitable for placement near a pool or patio.
Do you want to further reduce the transmission of vibrations to tiles, concrete, or a wooden surface? Combine the heat pump with W’eau anti-vibration mounts for mini heat pumps.
Suitable for saltwater pools
The heat exchanger of the W’eau Mini Inverter 2.0 Plus is made of titanium.
This makes the heat pump suitable for pools that use a saltwater system or salt electrolysis.
You can therefore use the model with both traditionally treated pool water and saltwater pools, provided that water quality values are correctly maintained.
Practical 32/38 mm connections
The heat pump features 32/38 mm water connections, making it a good fit for the pool hoses commonly used with smaller above-ground pools.
The heat pump is connected after the filtration system. Filtered pool water flows through the heat exchanger, is heated, and then flows back to the pool.
With a more powerful filter pump, a bypass can be used to precisely adjust the amount of water flowing through the heat pump.
Operates on standard 230V
You do not need heavy-duty power for this compact heat pump. The W’eau Mini Inverter 2.0 Plus 3 kW operates on 220-240V / 1 phase / 50 Hz.
The maximum power input is approximately 0.80 kW and the maximum current is approximately 4.1 amperes.
This makes this mini heat pump particularly suitable for private swimming pool installations.
Automatic flow switch
The built-in flow switch monitors water flow through the heat pump.
When the filter pump is running and sufficient water is flowing through the heat pump, the unit can function normally. When water circulation stops or is insufficient, the heat pump detects this.
This ensures extra ease of use and protection of the installation.
Works from -7°C outdoor temperature
The W’eau Mini Inverter 2.0 Plus has a specified operating range of -7°C to 43°C.
This allows the heat pump to be used during cooler periods, significantly extending the swimming season.
Keep in mind that a heat pump has less heating capacity and lower efficiency at very low outside temperatures than during warm summer days. For use in early and late season, good pool insulation and a cover are therefore extra important.
Compact size
The W’eau Mini Inverter 2.0 Plus has a compact design, making it easy to place near smaller pool installations.
With dimensions of approximately 42 x 36 x 49 cm, the heat pump takes up relatively little space. It weighs approximately 27 kg.
Despite its compact size, sufficient free space must be kept around the heat pump. The air intake and air outlet must not be blocked, as proper air circulation is necessary for optimal efficiency.
These mounting rails are made of vibration-damping rubber and feature an integrated aluminium profile. With the included mounting bolts and nuts, you can easily install your heat pump on these mounting rails. This set is suitable for heat pumps with a maximum depth of 40 cm. Using these mounting rails absorbs vibrations (more effectively) and will make the heat pump operate (even) more quietly.
Supplied as a complete set of 2 rails
Includes 4 bolts and nuts
Dimensions: 450 x 160 x 90 mm
This special connector is designed for a perfect connection between your W’eau Mini Inverter heat pump and the pool hose. With this connector, you can easily and leak-free connect your heating system to your pool, allowing the water to flow efficiently through the heat pump.
The connector is manufactured from durable and weather-resistant plastic, making it resistant to chlorine and salt water, UV radiation, and changing weather conditions. Thanks to the user-friendly design, you can attach the connector quickly and without special tools. Ideal for anyone who wants to install their heat pump safely, efficiently, and without leaks.
Enjoy crystal-clear pool water, hassle-free.W'eau Pool Salt is the ideal solution for those with a saltwater system, such as the popular Intex system. This convenient 20 kg bag contains high-quality granular pool salt with a purity of no less than 99.8% NaCl. Perfect for use with salt electrolysis and developed for the efficient, long-lasting operation of your pool equipment.
Thanks to the fine grain structure, the salt dissolves quickly in the water, giving you immediate results. Adding it once per season is usually sufficient – ideal for a carefree summer full of swimming fun.
Usage tips:
✅ Turn on the filtration system before adding the salt.✅ Sprinkle it evenly into the water, not on the bottom.✅ Use this formula to calculate your dosage:Pool capacity (liters) ÷ 250 = kilos of salt required.
For example:10,000 liter pool = 40 kg of salt required → 2 bags of W’eau Pool Salt of 20 kg.
With W’eau TA- Alkalinity - 5 kg, you can easily and effectively lower the total alkalinity of your pool water. Proper alkalinity ensures a stable pH level, which is essential for a healthy water balance. This powder helps make the pH level less susceptible to external influences, such as the weather or an excess of chemicals. W’eau TA- is quickly soluble and easy to dose manually, keeping your pool water in top condition. Thanks to the large 5 kg packaging, this product is ideal for larger pools or long-term use. Ensure a safe and stable pH level and prevent problems such as corrosion or skin irritation.The W’eau TA- Alkalinity - 5 kg is a reliable solution for lowering the alkalinity of your pool water and thereby stabilizing the water balance. Ideal for a safe and pleasant swimming environment!
Keep your pool heat pump clean and ensure it continues to perform optimally with the W'eau Heater Cleaner Heat Pump Cleaner - 1 liter. This special cleaner has been developed for maintaining important parts of the heat pump, including the evaporator, condenser, and the fin grille.
While using a heat pump, large amounts of outside air are drawn through the unit. As a result, dust, pollen, leaves, and other debris can accumulate between the fins over time. When the fin grille becomes clogged, air cannot flow through the heat pump as easily. This can impair performance.
With the W'eau Heater Cleaner, you can remove this dirt in a safe and simple way. Spray the cleaner onto the fins, let it soak for about 10 minutes, and then carefully rinse it off with a normal garden hose.
Specially developed for heat pumps
A pool heat pump extracts heat from the outside air. To do this, sufficient air must be able to flow through the evaporator continuously.
However, the fine fins at the back of the heat pump can easily become clogged with substances such as dust, pollen, sand, and other environmental debris.
The W'eau Heater Cleaner is specifically intended to clean these parts without the need for aggressive mechanical cleaning methods.
For optimal air circulation
A clean fin grille is important for proper air intake.
When there is a layer of dirt between the fins, the heat pump has to work harder to draw sufficient air through the evaporator. By cleaning the grille regularly, you ensure that air can continue to flow through the heat pump easily.
This helps the heat pump to continue operating as efficiently as possible.
Cleans the evaporator, condenser, and fin grille
The W'eau Heater Cleaner can be used to clean key components of the heat pump, including:
Evaporator
Condenser
Fin grille
The fins in particular require extra attention. They are thin and relatively fragile, and can easily be damaged if cleaned incorrectly.
That is why it is important to use a suitable cleaner for this and to rinse the fins gently.
Easy to apply with spray nozzle
The bottle is equipped with a practical spray nozzle that allows you to distribute the cleaner evenly over the fins.
Spray the product from top to bottom over the surface to be cleaned until an even layer is formed.
This means you do not need to use brushes or other hard materials between the fragile fins.
Let it soak for just 10 minutes
After application, let the W'eau Heater Cleaner soak in for about 10 minutes.
During this time, the product can loosen the accumulated dirt. Then, gently rinse the treated parts clean with a normal garden hose.
Do not use a high-pressure water jet.
Leaves a protective layer
The W'eau Heater Cleaner not only cleans but also leaves a protective layer on the fins.
This protective layer helps prevent new contamination, allowing the parts to stay clean longer.
For optimal results, it is recommended to repeat the treatment a few times throughout the year.
Helps maintain the efficiency of your heat pump
A dirty evaporator can reduce airflow through a heat pump. This can make the unit function less efficiently.
Regular cleaning is therefore important, not only to keep the heat pump tidy but also as part of proper technical maintenance.
With the W'eau Heater Cleaner, you help ensure that the heat pump can continue to draw in sufficient air and perform as well as possible.
Can contribute to a longer lifespan
A pool heat pump is a significant investment. Good maintenance is therefore important.
By removing dirt regularly, you prevent the evaporator and the fin grille from remaining heavily soiled for long periods.
A clean heat pump can function more efficiently, and regular cleaning can thus contribute to preserving and extending the lifespan of the unit.
How to use W'eau Heater Cleaner?
Switch off the heat pump completely before you begin maintenance.
Then spray the W'eau Heater Cleaner evenly from top to bottom over the fins. Ensure the product is well distributed.
Let the cleaner soak in for about 10 minutes.
Then gently rinse the treated parts clean with a normal garden hose. Do not use a high-pressure water jet and be careful with the fragile fins.
Allow the heat pump to drain and dry sufficiently after cleaning before using it normally again.
For proper maintenance, you can repeat this treatment a few times a year. How often cleaning is necessary depends on the environment where the heat pump is located. If there are many trees, dust, pollen, or other debris, more frequent cleaning may be needed.
Never use a high-pressure cleaner
For cleaning the fins, never use a high-pressure cleaner.
The fins of a heat pump are thin and can easily bend or become damaged due to the high water pressure. Damaged fins can subsequently impede airflow through the evaporator.
A normal garden hose with a gentle water stream is sufficient to rinse off the Heater Cleaner and the loosened dirt.
Using a vacuum cleaner on or between fragile parts is also not recommended.
Ideal for maintenance before and after the swimming season
A practical time to clean the heat pump thoroughly is at the beginning and end of the swimming season.
After an entire season, quite a bit of dust, pollen, and other contamination can have accumulated.
By letting the heat pump enter the winter clean and checking it upon restarting, you keep the unit well maintained.
Depending on the environment, an extra cleaning during the season may be wise.
1 liter content
The W'eau Heater Cleaner is supplied in a generous 1 liter package.
Thanks to the spray nozzle, you can apply the agent specifically to the parts that need cleaning.This makes the product suitable for periodic maintenance of your pool heat pump.Keep your pool heat pump in optimal conditionWith the W'eau Heater Cleaner Heat Pump Cleaner - 1 Liter, periodic maintenance of your pool heat pump becomes simple. The cleaner removes dirt from the evaporator, condenser, and finned grid, allowing the heat pump to continue drawing in sufficient air.Spray the Heater Cleaner onto the fins, let it soak for approximately 10 minutes, and then rinse carefully with a garden hose. This helps maintain the heat pump's efficiency and ensures your system remains well-maintained season after season.
The W'eau Spa Rosemary Scent is a powerful, refreshing fragrance specially formulated to give you a boost when you feel tired or listless. Rosemary is known for its stimulating and uplifting properties, which improve your mood and provide a sense of freshness and vitality. This scent is ideal for use during moments when you feel a bit 'down' or need extra energy. It promotes blood circulation and has a positive effect on your mental clarity and focus, making you feel completely reborn after your spa session.
This rosemary scent is completely foam-free and contains no dyes, which means it does not affect the water quality of your spa and does not damage the technical components of your spa. The scent dissolves completely in the water, so you only have to enjoy the positive effects of the fragrance without worrying about residue.
Usage:Add a capful of Rosemary scent to your spa or hot tub to experience an instant refreshing boost. Perfect for moments when you want to feel more energetic and improve your well-being.
Conclusion:
The W'eau fragrances each offer a unique aromatherapy experience specially designed for spas and hot tubs. Whether you are looking for relaxation, refreshment, romance, or recovery, W'eau fragrances help you get the most out of your spa experience. Each of the scents is made from high-quality essential oils, is completely foam-free, and free of dyes, ensuring a safe and long-lasting scent experience without having to worry about water quality or spa equipment.
The W'eau Skye Spa is a luxurious 4-person spa designed to offer you and your guests the ultimate relaxation. This spa features a modern and stylish design that fits perfectly into any outdoor space, whether it's your garden, terrace, or patio. The spa is crafted from high-quality materials and offers a fantastic spa experience with its powerful jets and comfortable seating.
Optimal Massage Experience
Thanks to the 12 powerful hydrotherapy jets, the W'eau Skye Spa offers a deeply relaxing massage experience. These jets are strategically placed to optimally massage your muscles and help your body relax. Whether you are looking for relief from tense muscles or just seeking a moment of peace, this spa offers it all.
Advanced Technological Features
The spa is equipped with the reliable Balboa BP200 control system, allowing you to easily adjust the temperature and jets to your preference. The integrated 2KW heating element ensures that you can quickly increase the water temperature, with a capacity of 1.5-2.5°C per hour. The spa can be heated to a maximum of 40°C, ideal for a relaxing session, even on colder days.
Durable and Low-Maintenance
The maintenance-free synthetic exterior of the spa is resistant to UV radiation and rain, making it perfect for outdoor use all year round. The stainless steel frame provides stability and durability. The ozone disinfection system keeps the water clean and reduces the use of chemicals, while the included filter system is easy to maintain.
Extra Luxury Features
The W'eau Skye Spa comes with RGB LED lighting in various colors, allowing you to create a soothing atmosphere during your spa session. Additionally, there is a built-in waterfall, which contributes to overall relaxation. This spa comes with a spa filter and free cover included, so you can get started right away.
Key features:
Suitable for 4 people, ideal for relaxing with friends or family.
12 hydrotherapy jets for an optimal massage experience.
Balboa control system for easy operation and temperature control.
Ozone disinfection system for crystal clear water.
RGB LED lighting for a relaxing atmosphere.
Low-maintenance design with a durable, weather-resistant exterior.
Includes free cover and spa filter.
With the W'eau Skye Spa, you can create a relaxing wellness experience in your own garden. Enjoy luxury and comfort while your muscles are massaged and you unwind.
To ensure that your spa water remains as clean and clear as possible, a good filter cartridge is indispensable. The Spa Filter Type 14 is a replacement filter with a diameter of 15 cm and a length of 21 cm. This filter is known, among other things, by the references SC714 and 6CH-940.
The cartridge features an external threaded connection at the bottom and has a closed top. Because of this, it is important to not only look at the dimensions before ordering, but also to verify that the connection matches your current spa filter.
Dimensions of 21 x 15 cm
The Spa Filter Type 14 has the following dimensions:
Length: 21 cmDiameter: 15 cm
When checking the dimensions, you should measure the filter from edge to edge, without including any connections, threads, or other protruding parts.
Always compare these measurements with your existing filter. A small difference in dimensions or connection can mean that the cartridge will not fit properly in the filter housing.
External thread at the bottom
At the bottom of this spa filter, there is an external threaded connection. This is used to screw the cartridge into the designated connection of the spa.
The top of the filter is closed.
Therefore, always check these three important characteristics before purchasing:
Dimension: 21 x 15 cmBottom: External threadTop: Closed
When these specifications match your current cartridge, you can determine much more accurately if Type 14 is the correct replacement filter.
Pleated filter material for a large filter surface area
The pleated filter material provides a large effective filter surface area. During circulation, the spa water flows through the cartridge, where hair, dust, and other small dirt particles are captured.
This allows the filter to support the filter system in keeping the water clean and clear, and prevents as much dirt as possible from circulating further through the spa's technical system.
Clean the filter regularly
During use, dirt builds up between the pleats. This can cause the water flow to decrease over time.
Therefore, remove the cartridge from the spa regularly and rinse the dirt carefully out from between the pleats. For a more thorough periodic cleaning, you can use a suitable spa filter cleaner.
When the filter material is damaged or heavily worn, or if the filter clogs quickly even after thorough cleaning, it is advisable to replace the cartridge.
Check your current filter before ordering
The Spa Filter Type 14 – SC714 / 6CH-940 is 21 cm long and 15 cm in diameter, features external thread at the bottom, and has a closed top.
Always measure your current cartridge from edge to edge, without including the thread or other connections. Then also check the connection and the top. This way, you prevent ordering a spa filter that does not fit your spa.
Fine glass beads - 20 kg are the ultimate filter medium for your swimming pool, offering superior filtration compared to other filter materials. These smooth glass beads have a fine structure (0.6 - 0.8 mm) and are specially designed to filter even the smallest dirt particles from the water, making them ideal for smaller swimming pools. With an exceptional lifespan of over 25 years, you almost never need to replace the glass beads, which ensures long-lasting clarity of your pool water. Furthermore, glass beads are more efficient than other media, as you need less of them. Thanks to the smooth surface structure, dirt particles do not stick to the beads, allowing them to be cleaned quickly and easily during backwashing.
Determining the quantity of glass beads: Based on the filter capacity of your sand filter pump, you use 25% fewer glass beads than indicated for other filter media. For example, if you need 100 kg of filter medium, you only use 75 kg of glass beads, which saves you both material and costs.
With Fine glass beads - 20 kg, you are investing in a durable, efficient, and low-maintenance filter medium that guarantees you years of clear swimming pool water.
With W’eau TA+ Alkalinity - 1 kg you ensure that the alkalinity of your pool water remains optimal, which is essential for a stable pH value. By increasing the total alkalinity with TA+ powder, the pH value becomes less sensitive to fluctuations caused by weather conditions or the use of chemicals. This helps maintain a safe and comfortable water balance, which improves both the lifespan of your pool and your swimming comfort. The dosage of the powder is easy to adjust to the size of your pool, and with a few simple steps, you ensure that the water is back to the right level. Ideal for anyone who wants to keep their pool water healthy and balanced.The W’eau TA+ Alkalinity helps keep your pool water in top condition by ensuring a stable pH value, which is crucial for a safe and comfortable swimming environment.
The W’eau Vertical Full Inverter 8 kW is a compact, energy-efficient pool heat pump specifically designed for small to medium-sized swimming pools and spas. Thanks to its vertical air outlet, this heat pump is ideal for gardens with limited space. With excellent energy efficiency and smart Full Inverter technology, you can heat your pool in a reliable, quiet, and cost-effective way. Suitable for pools up to a maximum of 32,000 liters (recommended up to 24,000 liters), this heat pump easily extends your swimming season from April through October.
Key features
Extremely energy-efficient: Maximum COP of 1 to 15.6 at 26°C.
Compact design: Ideal for smaller gardens due to the vertical air outlet.
Versatile: Suitable for both swimming pools and spas.
Full Inverter technology: Automatically adjusts power for efficient energy usage.
User-friendly: Easily control the heat pump via the integrated Wi-Fi module or the display.
High-quality materials: Features a rust-proof ABS housing and is saltwater-resistant.
Quiet operation: Noise level of only 22 - 31 dB at 10 meters.
Dual functionality: Heating and cooling possible.
Conclusion
The W’eau Vertical Full Inverter 8 kW is the perfect solution for pool and spa owners looking for a compact, quiet, and energy-efficient heat pump. Thanks to its smart Full Inverter technology, simple operation, and excellent performance, this heat pump is an ideal choice for a comfortable swimming season.
Are you experiencing cloudy pool water, limescale deposits, or is your chlorine not working as well as it should? Then there is a good chance that your pH level is too high. With W’eau pH Minus powder, you can lower the pH level quickly, easily, and effectively, so that your pool water feels clear, fresh, and comfortable again.
A correct pH level (between 7.2 and 7.6) is essential for the optimal functioning of water treatment products. By regularly adjusting the levels with this powerful pH-minus powder, you prevent unnecessary chemical consumption and skin and eye irritation, while ensuring a pleasant swimming experience for the whole family.
The fine-grained powder form ensures that the product dissolves quickly when pre-mixed with water. This allows it to be evenly distributed throughout the pool, helping you achieve the desired result quickly. Thanks to the convenient 1.5 kg packaging, this product is ideal for above-ground pools and small to medium-sized swimming pools.
With W’eau pH Minus, you choose reliable water balance, clearer pool water, and greater swimming comfort all season long.
Prepare your pool better for winter with a Winter Pool Cover Pillow. This practical inflatable pillow is placed under the winter cover and ensures that the cover is raised in the middle.
This creates a slight slope in the cover. Rainwater, meltwater, leaves, and other debris can thus be directed more easily towards the outside of the pool and are less likely to remain in a large puddle in the middle of the winter cover.
A winter pillow is a particularly handy addition for above-ground pools that remain outside during the winter and are covered with a winter cover.
Why use a winter pillow?
When you lay a large winter cover completely flat over a pool, rainwater can collect in the lowest part of the cover.
As more water remains on top, the cover is pushed down further and further. This causes extra strain on both the cover and the attachments.
By placing an inflated winter pillow under the cover, you create a raised center point. This means the cover lies less flat and water can be directed towards the sides more easily.
Placement under the winter pool cover
The winter pillow is placed on the pool water and under the winter pool cover.
Inflate the pillow first and then position it as much as possible in the desired spot in the pool. Then, the winter pool cover is applied over the pool as usual.
The pillow supports the cover from below and thus creates a raised area.
For larger pools, multiple winter pillows can optionally be used to support the cover over a larger surface area.
Helps reduce rainwater accumulation
One of the most important functions of a winter pillow is limiting large amounts of standing rainwater on the cover.
The raised center section ensures that the cover slopes towards the sides.
This does not mean that no water at all can remain on the winter cover. The exact performance depends on the shape of the pool, the tension of the cover, the position and size of the winter pillow, and the amount of precipitation.
Checking the winter cover therefore remains necessary throughout the winter.
Less stress on the winter pool cover
Water is heavy. When dozens or even hundreds of liters of rainwater collect on a winter cover, considerable stress is created.
A winter pillow helps support the shape of the cover and reduces the chance that all the rainwater gathers at one low point.
This can contribute to protecting the winter pool cover and the attachment points around the pool.
Also useful against leaves and debris
Not only rainwater can collect on a flat winter cover. Leaves and other debris also accumulate easily in puddles of water.
By giving the cover more slope with a winter pillow, coarse debris can move more easily towards the edges.
This makes maintaining the winter cover during autumn and winter simpler.
Inflatable and easy to position
A winter pillow is easy to use.
Before placement, the pillow is filled with air. Then you lay it on the pool water and position it under the winter pool cover.
After winter, you let the air out. This means the pillow takes up significantly less space during storage and can be stored easily until the next winter season.
Do not inflate fully hard
Do not inflate a winter pillow to its maximum firmness.
Due to temperature differences, the air pressure in the pillow can change. When the pillow is fully tightly inflated, there is less room to absorb these changes.
The pillow must be sufficiently filled to support the winter cover, but it does not need to be rock hard.
Suitable for various types of above-ground pools
The winter pillow can be used with various above-ground pools that are covered with a suitable winter cover.
For example:
Steel pools
Frame pools
Round pools
Oval pools
Rectangular pools
Always check whether the winter pillow and the cover used are suitable for your specific pool and winter setup.
Ideal addition to a winter pool cover
A winter pillow does not replace the winter pool cover. Both products have a different function.
The winter pool cover protects the pool against leaves, debris, and weather influences. The winter pillow is placed underneath and helps to keep the cover raised.
Together, they form a practical combination for winterizing an above-ground pool.
Practical support for your winter cover
With a Winter Pool Cover Pillow, you provide the winter cover with extra support during the cold months. The pillow is placed under the cover and creates a raised area, making it harder for rainwater and debris to remain in the middle of the cover.
A simple yet handy addition for winterizing an above-ground pool, especially when the pool remains covered outdoors for the entire winter.
The Winter Float is designed to protect your pool from freeze damage during the winter months. These floats absorb the pressure caused by expanding ice, keeping your pool wall intact. You should always place them in a horseshoe or diagonal shape, depending on the size of your pool. One winter float is 50 cm long, and depending on the dimensions of your pool, you will need multiple floats to provide optimal protection.
How many winter floats do you need?
The number of winter floats required is determined by the length or diameter of your pool. Since each float is 50 cm, divide the total length or diameter of your pool by 50 to calculate the number needed. Below are some guidelines:
Conclusion: The length or diameter x 2 is the number of winter floats required.
With the right number of winter floats, you effectively protect your pool against winter conditions!
The W'eau large chlorine tablets of 200 grams each have been specially developed for easy and effective disinfection of swimming pool, spa, and hot tub water. Thanks to the stabilized formula, the tablets dissolve slowly and ensure a constant chlorine release, even when exposed to sunlight. This 1 kg pack is ideal for owners of larger swimming pools, especially in-ground pools, where long-lasting and stable water quality is essential.
Safety warnings
Harmful if swallowed.
Causes serious eye irritation.
May cause respiratory irritation.
Very toxic to aquatic life, with long-lasting effects.
Always keep chlorine products separate from other chemicals.
Always add tablets to the water, never the other way around.
Very strong suction power, combined with a long runtime and a large debris capacity. That is the W’eau Kokido Voltera 60 electric spa and pool vacuum cleaner! This makes the vacuum perfect for very large pools and spas. And with a runtime of 75 minutes, you can clean your pool or spa completely in one go. Afterward, place the vacuum on the charger and it will be fully charged within 5 to 6 hours. This way, you are ready for the next cleaning adventure and you will never again dive into a spa or pool filled with dirt!
Unique dual filtration
The Kokido Voltera 60 vacuums up both coarse and very fine dirt during a single cleaning session. This is due to the dual filtration in the pool vacuum. Inside the vacuum is a filter that catches coarse debris such as leaves. The rest of the water passes through a very fine filter that removes the remaining dirt from the water. The result? Super clean and clear pool water!
Note: Always keep the pool vacuum underwater when in use. If you hold it above the water, the motor will break.
The W’eau Full Inverter 20 pool heat pump with a capacity of 7.6 kW is not your average pool heater, but a new generation of heat pump that brings technology, comfort, and efficiency together. The heat pump features smart functions such as a power module for insight into your daily power consumption, a convenient touchscreen display, and customized weekly schedules! This gives you complete control over your pool's heating process, without any hassle or wasted energy.
It is suitable for pools up to 28,000 liters, but for optimal performance, we recommend using the heat pump for pools up to 24,000 liters. Ideal for those who want to start swimming early in the season, or enjoy it until late in the autumn!
Renewed design
The housing has been completely updated: no more clunky air conditioning look, but a sleek, compact design with a sturdy metal cabinet and durable plastic coating. Under the hood, this heat pump is equipped with a reliable Mitsubishi compressor and a twisted titanium heat exchanger, good for top performance under various weather conditions.
Improved performance
The W'eau Full Inverter 20 is not just better looking, but also more resistant to UV radiation, temperature fluctuations, and long-term outdoor use. And thanks to the new Better Defrost function, ice formation in colder outdoor temperatures is detected and resolved more quickly. This is crucial for proper operation in the early spring or late autumn.
Smarter energy management
One of the biggest innovations of this model is the integrated power module. This allows you to see exactly how much energy the heat pump consumes daily. These real-time insights make it easier to adjust your energy usage, for example by cleverly scheduling heating moments during off-peak hours. This is complemented by the weekly time setting. This is a function that allows you to set how the pump should perform for each day of the week separately.
External control possible
Additionally, the heat pump is now equipped with a linkage switch, making it very easy to connect to an external system such as a home automation installation or pool controller. So, whether you want to switch manually or automate everything completely, this heat pump moves along effortlessly.
Operation via touchscreen and Wi-Fi
No more complicated menus; the new interactive touchscreen display makes everything just that little bit easier. And with the built-in Wi-Fi module, you can set everything from your smartphone. You can adjust the temperature, switch between programs, and receive notifications if something is wrong, wherever you are.
The four smart programs are:
Auto: automatic control with heating and cooling
Eco: extra economical mode without cooling function
Boost: rapid heating early in the season
Cooling: active cooling during hot summer days
Excellent efficiency, even at lower temperatures
How much kW of heat the pump extracts from 1 kW of energy
Temperature
Heat output
15°C
4.9 – 7.6 from 1
26°C
6.8 – 15.8 from 1
Where other heat pumps still struggle with efficiency in April or October, the W'eau Full Inverter 20 heat pump keeps doing its job. Even at an outdoor temperature of 15°C, it still delivers 4.9 to 7.6 times the energy used as heat. And at summer temperatures, the efficiency even rises to 15.8 to 1, exceptionally efficient for a model in this class.
Installation advice for optimal use
Proper placement is important to get the most out of this heat pump. Keep at least 80 cm of free space at the rear and 250 cm at the air discharge side. Connect the pump using a bypass kit (sold separately), so you can precisely control the water flow. Do you use automatic dosing or a chlorine installation? Then install the heat pump before these systems in the circuit.
The W’eau Vertical Full Inverter heat pump protective cover is the ideal solution to extend the lifespan of your heat pump. This high-quality protective cover offers optimal protection against various weather conditions such as rain, snow, sleet, and freezing temperatures. By protecting your heat pump from dirt, dust, and other external influences, it stays in top condition, allowing you to enjoy wonderfully warm pool water for longer.
The protective cover is specially designed for W’eau Full Inverter heat pumps with capacities of 13.5 kW, 17.5 kW, and 21 kW. Thanks to its dimensions of 92 x 43 x 62 cm, the cover fits these models perfectly and protects the pump from damage and wear. This protective cover is made of sturdy and durable material, ensuring it can withstand the elements and has a long service life.
It is important to remember that the heat pump must not be turned on while the cover is on. This can damage both the heat pump and the protective cover. The cover is only intended for protection when the heat pump is not in use, especially during the winter months or when you are not using the pump for an extended period.
The W’eau Full Inverter heat pump protective cover is an essential accessory for protecting your heat pump against the elements. Thanks to the perfect fit for W’eau Full Inverter models and robust, weather-resistant materials, this cover ensures that your heat pump lasts longer and remains in top condition. The only thing you need to keep in mind is that the heat pump must be switched off when the cover is on, and that you must properly prepare the heat pump before placing the cover.
The W’eau Full Inverter heat pump protective cover is the ideal solution to extend the lifespan of your heat pump. This high-quality protective cover offers optimal protection against various weather conditions such as rain, snow, sleet, and freezing temperatures. By protecting your heat pump from dirt, dust, and other external influences, it remains in top condition, allowing you to enjoy wonderfully warm pool water for longer.
The protective cover is specially designed for W’eau Full Inverter heat pumps with a capacity of 27.3 kW and 35 kW. Thanks to its dimensions of 112 x 48 x 73 cm, the cover fits these models perfectly and protects the pump from damage and wear. This protective cover is made of sturdy and durable material, making it resistant to the elements and ensuring a long service life.
It is important to remember that the heat pump must not be turned on while the cover is over it. This can damage both the heat pump and the protective cover. The cover is intended only as protection when the heat pump is not in use, especially during the winter months or when you are not using the pump for an extended period.
The W’eau Full Inverter heat pump protective cover is an essential accessory for protecting your heat pump against the elements. Thanks to the perfect fit for W’eau Full Inverter models and robust, weather-resistant materials, this cover ensures your heat pump lasts longer and stays in top condition. The only thing to keep in mind is that the heat pump must be turned off when the cover is on, and that you must properly prepare the heat pump before placing the cover.
Are your swimming pool water levels not quite right? W’eau pH plus powder easily increases the pH level of your pool so you can go back to doing cannonballs without a care! This extra-large 5 kg package is suitable for even the largest above-ground or built-in pools, and its powder form means it dissolves almost instantly in the pool water.Instructions for use W’eau pH plus powderTo know how much pH minus or pH plus you need to add to your water, always measure the current pH level first. An ideal pH level is between 7.2 and 7.6. Mix the correct amount of pH powder in a bucket with warm or pool water. You can read exactly how much to add on the packaging. Spread it evenly over the pool and you're all set!Safety instructions W’eau pH plus powderNever use W’eau pH plus powder at the same time as other chemicals like chlorine, and always add the powder to the water, never the other way around. Always store the powder in a safe, dry, and cool place. Also, always read the safety instructions on the packaging before use!
W'eau Jet Clean - 500 ml is a powerful cleaner specially designed to remove oils, dirt, and mineral deposits from the pipes and jets of your spa. This 'invisible cleaner' targets the parts of the spa you don't see, but which are essential for proper water flow and the maintenance of your equipment. By cleaning the pipes and jets, W'eau Jet Clean prevents the buildup of dirt that can restrict water circulation and cause potential damage to the equipment. We recommend using the product every three months, just before changing the water, to ensure your spa continues to function optimally.
Safety instructions:
Causes skin irritation and serious eye damage.
Very toxic to aquatic life with long-lasting effects.
Always wear protective gloves and keep the product out of reach of children.
Store the product in a well-ventilated area and in a tightly closed container.
W'eau Jet Clean is the ideal solution to ensure that your spa always functions properly and remains free from harmful buildups of dirt, oils, and minerals.
The white pool hose 38 mm – 2 meters is the ideal solution for connecting a filter pump, sand filter set, heat pump, or other pool equipment to your above-ground pool. Thanks to the standard 38 mm diameter, this hose fits virtually all pools and matching accessories that have the same connection.
The hose has a total length of 2 meters and is easy to shorten per meter thanks to special recesses. This allows you to customize the hose for your specific situation and even create multiple shorter hoses from one roll. The white color gives the hose a fresh and neutral look, matching most swimming pools.
With this flexible and durable hose, you ensure a reliable connection and optimal water circulation in your pool system.
The W’eau FPP-350 sand filter set is designed for the efficient cleaning and filtering of both above-ground and inground swimming pools with a capacity of up to 16,000 liters. This powerful filter set, with a design flow rate of 4 m³/h, is suitable for low to medium resistance, meaning the piping can be up to 10 meters long and you can connect the filter set to a pool vacuum. The filter set is supplied as a complete kit, including a pool pump, 6-way valve, base plate, connection hose, and installation materials.
Thanks to the Top Mount sand filter with a 6-way valve, you can easily operate and maintain the filtration. The six different positions on the valve provide maximum flexibility for filtering, rinsing, and keeping your pool water clean. The powerful, self-priming pump in this set is designed for heavier tasks, such as processing dirty pool water, and is also energy-efficient.
The filter vessel of the W’eau FPP-350 is made of polyethylene reinforced with polyester, making it resistant to a working pressure of up to 2.5 bar. This makes the filter set extremely durable and suitable for intensive use. The filter vessel can be filled with filter sand or filter glass (not included), depending on your preference for the type of filter medium.
Functions of the 6-way valve:
Filter: Water flows from the top to the bottom of the filter vessel to filter dirt and impurities out of the pool.
Backwash: Water flows from the bottom to the top to rinse the filter material clean and remove accumulated dirt.
Rinse: Flushes away dirty water after backwashing to keep the filter material clean.
Close: Closes all inlets and outlets when the pump is not in use.
Waste: Drains pool water directly into the sewer, for example when the water level needs to be lowered.
Circulate: Circulates the water without filtering it, which is useful when treating water, such as for algae control.
Filter medium:
The filter vessel of the W’eau FPP-350 can be filled with filter sand or filter glass, depending on your preference. Filter sand is a cost-effective option and only needs to be replaced every 5 years. Filter glass, on the other hand, is more durable, lasts up to 15 years, and has higher filtration efficiency, meaning you need less of it.
Required amount of filter sand: 18 kg
Required amount of filter glass: 15.3 kg
Required glass beads: 13.5 kg
Warranty:
Pool pump warranty: 2 years
Filter vessel warranty: 5 years
Valve warranty: 1 year
Scope of delivery:
Sand filter vessel
Pool pump with RCD plug (residual current device)
Base plate
6-way valve
Connection hose
Connection materials (50 mm)
Manual
The W'eau Volta V7 pool vacuum cleaner makes daily maintenance of your pool a lot easier. Thanks to the pivoting vacuum head, you can easily clean your entire pool with this vacuum cleaner. The Volta V7 pool vacuum cleaner from W’eau is ideal for large pools.
Battery-powered pool vacuum
This vacuum cleaner runs on a rechargeable battery. With a runtime of 75 minutes, the battery has enough operating time to clean your entire pool on a single charge. Is the battery empty? You can easily recharge it within 5 to 6 hours using the included charger.
Easy to use
The body and nozzle of the W’eau Volta V7 pool vacuum cleaner ensure strong suction power. This allows you to easily remove heavier dirt from your pool as well. Furthermore, thanks to its cone shape, this pool vacuum has a large capacity for collecting all the dirt from your pool. Because the vacuum head is transparent, you always have a clear view of the surface you are cleaning. Handy, right?
Dual filtration
The dual filtration of the W’eau Volta V7 makes this vacuum cleaner unique. Because the Volta V7 pool vacuum is equipped with a standard internal filter and an additional filter cartridge, dirt is filtered twice. Since the dirt passes through the internal filter first and then through the filter cartridge, dirt particles, both large and small, are captured even more effectively. This vacuum cleaner truly removes all dirt particles from your pool!
Please note: A telescopic pole is not included as standard with this pool vacuum cleaner. You can order one directly below under "frequently bought together."
Features of the W’eau Volta V7
Standard and fine cleaning in one pool cleaner
Easily adjustable pleated cartridge filter with two settings
Filter capacity of 75 liters per minute
Can be used up to a depth of 3 meters
Can be used with an adjustable telescopic pole
The filter is easy to disassemble and empty
The fine pleated filter has a large surface area for excellent filtration performance
The suction heads feature brushes to scrub off stubborn dirt
Included as standard
Electric W’eau V7
Battery pack
Battery charger
Standard filter; 250 microns
Fine filter; 50 microns
Pivoting transparent suction head with brushes
Narrow suction head with attachment brush
1 swivel suction head
2 clip-on side brushes
3 clip-on bottom brushes
Make your mini heat pump run quieter and more stably with the W’eau vibration dampers. These four sturdy mounting beams help absorb the vibrations of the heat pump, so they are less easily transmitted to the surface. This limits annoying resonance and contact noise.
Vibration-damping rubber with aluminium reinforcement
The mounting beams are made of vibration-damping rubber and feature an integrated aluminium profile. The rubber absorbs some of the vibrations that occur during heat pump operation. At the same time, the aluminium profile provides extra rigidity and stable support.
This combination makes the vibration dampers ideal for placement on a hard surface, such as tiles or concrete. The heat pump stands firmly, while the transfer of vibrations to the surface is reduced.
Simple installation
Thanks to the included mounting bolts and nuts, you can easily install your mini heat pump on the mounting beams. The set consists of four beams, so you can properly support the heat pump and secure it stably.
The vibration dampers are suitable for mini heat pumps with a maximum depth of 40 cm. Always check the dimensions and mounting points of your heat pump before purchasing.
Package contents
4 W’eau vibration-damping mounting beams
Mounting bolts
Nuts
With these W’eau vibration dampers, you place your mini heat pump on a firm, stable, and low-vibration base. A practical accessory for those who want to limit the transmission of vibrations and enjoy a quieter pool environment.
The W’eau Controller 5GHz is the essential component for the optimal operation of your W’eau Full Inverter pool heat pump. With this advanced controller, you can easily manage the temperature and other functions of your heat pump, thanks to reliable and fast 5GHz wireless technology. This makes it possible to efficiently manage your pool's energy consumption and performance, regardless of the conditions.
Suitable for:
W’eau Full Inverter pool heat pump 5.5 kW
W’eau Full Inverter pool heat pump 7.6 kW
W’eau Full Inverter pool heat pump 10.5 kW
W’eau Full Inverter pool heat pump 13.5 kW
W’eau Full Inverter pool heat pump 17.5 kW
W’eau Full Inverter pool heat pump 21 kW
This controller is a crucial part of your W’eau heat pump and can be easily replaced by yourself when your device is out of warranty. This way, you ensure that your heat pump always remains in top condition and you can enjoy a perfectly heated pool without any interruptions.
The W’eau Vertical Full Inverter 10 kW is an innovative swimming pool heat pump, specifically designed for efficient and flexible heating of swimming pools in compact spaces. With a unique vertical air outlet system, high-quality materials, and Full Inverter technology, this heat pump offers optimal efficiency, ease of use, and durability. Suitable for pools up to a maximum of 40,000 liters (ideally up to 30,000 liters), this pump is perfect for extending your swimming season from April through October.
Key features
Vertical air outlet: Ideal for small gardens; no cold air directed toward the patio or plants.
High efficiency: Maximum 1 to 16 at 26°C and 7.6 at 15°C.
Very quiet: Noise level of just 24 - 32 dB at 10 meters.
Full Inverter technology: Energy saving by adjusting to optimal output.
Versatile functions: Heating, cooling, and smart control via smartphone.
Durable design: Rust-resistant ABS housing and saltwater resistant.
Applications and use
With the W’eau Vertical Full Inverter 10 kW, you can enjoy a comfortably heated swimming pool, even during cooler months. This heat pump is suitable for both private swimming pools and spas, with functions that are easy to adjust via the app. The device is particularly energy-efficient, even at lower outdoor temperatures, allowing you to extend the swimming season effortlessly.
Conclusion
The W’eau Vertical Full Inverter 10 kW is an excellent choice for those looking for an energy-efficient, quiet, and durable heat pump. The compact design with vertical air outlet makes the unit particularly suitable for smaller gardens, without compromising on performance or comfort. Combine this with smart technology and versatile features, and you have the perfect heat pump for long-lasting swimming enjoyment.
The W'eau TA- Alkalinity 1 kg is an essential product for maintaining the chemical balance of your pool water. This product helps to lower the total alkalinity (TA) of the water, which is important for keeping the pH value stable. A stable pH value ensures that your pool water is less sensitive to external factors such as weather changes and the use of chemicals. This extends the lifespan of your pool and makes it more pleasant to swim in.
With this 1 kg package, you can easily adjust the alkalinity by adding the powder to water in a bucket and then distributing it evenly throughout the pool. The product dissolves quickly and ensures that the pH value remains stable for longer.The W'eau TA- Alkalinity 1 kg is a reliable choice for anyone who wants to keep their swimming water healthy and clear by maintaining the correct alkalinity levels.
The W'eau Scent Pack contains six delightful fragrances specially designed for use in your spa. This pack is perfect for treating yourself or as a gift for a spa enthusiast. W'eau fragrances are known for their aromatherapeutic properties, which improve your mood and enhance the atmosphere. Whether you want to relax, refresh, or boost your mood, the W'eau scent pack has a suitable fragrance for every occasion.This pack contains six different fragrances, each with a bottle capacity of 250 ml. The fragrances are free from dyes, do not foam, and dissolve completely in the water without damaging the surface or technical components of your spa. The scents are based on essential oils and offer an intensive fragrance experience that supports your well-being.Instructions for use: Pour one capful of W'eau fragrance into your spa and let the aromas work their magic. For a stronger effect, you can optionally add an extra half capful.Conclusion: The W'eau Scent Pack - 6 x 250 ml is the perfect way to enrich your spa experience with high-quality fragrances based on essential oils. It offers a variety of scents suitable for every mood, from relaxation to refreshment. Thanks to the safe, non-foaming formula, this pack is ideal for long-term use in your spa without any harmful effects on the water or equipment.
With W’eau TA+ Alkalinity - 3 kg, you ensure that the alkalinity of your pool water remains optimal, which is essential for a stable pH value. By increasing the total alkalinity with TA+ powder, the pH value becomes less susceptible to fluctuations caused by weather conditions or the use of chemicals. This helps maintain a safe and comfortable water balance, which improves both the lifespan of your pool and swimming comfort. The dosage of the powder is easy to adjust to the size of your pool, and with a few simple steps, you ensure the water is back to the correct level. Ideal for anyone who wants to keep their pool water healthy and balanced.The W’eau TA+ Alkalinity helps keep your pool water in top condition by guaranteeing a stable pH value, which is crucial for a safe and comfortable swimming environment.
