The Hayward AquaRite Pro Low Salt for up to 75 m³ is an advanced salt electrolysis system for the automatic disinfection of swimming pool water. The system combines the convenience of automatic chlorine production with a relatively low salt content of only 1 to 3 grams per liter of water. This allows you to enjoy clear and hygienic pool water without having to constantly dose chlorine tablets or chlorine granules manually.
This model is suitable for swimming pools up to 75 m³ (75,000 liters) and can be combined with the Hayward Sense & Dispense pH and ORP module. This expands the installation into a complete automatic water treatment system that not only disinfects, but also continuously monitors the pH and Redox/ORP value of the pool water.
The AquaRite Pro Low Salt is therefore particularly suitable for pool owners looking for a professional and highly automated solution for their water treatment.
Low Salt: only 1 to 3 grams of salt per liter
The most important difference between the AquaRite Pro Low Salt and traditional salt electrolysis systems is the relatively low salt concentration required.
For proper operation, approximately 1 to 3 grams of salt per liter of pool water is needed. For a 75,000-liter pool, this means approximately 75 to 225 kg of salt, depending on the chosen concentration.
A lower salt content has several advantages. The pool water tastes and feels less salty, and the salt load on the technical equipment remains more limited. As a result, the risk of corrosion to metals and stainless steel components is also reduced compared to systems that operate with a higher salt concentration.
A correct water balance, equipotential bonding, and the use of suitable materials remain important for every saltwater installation.
How does the AquaRite Pro Low Salt work?
The operating principle is simple yet highly effective. The necessary salt is added to the pool water once and dissolves completely.
The water is then pumped from the pool to the filtration system by the circulation pump. After the water has been filtered, it flows through the electrolysis cell of the AquaRite Pro.
In this cell, the dissolved salt is converted into an active disinfectant using an electrical current. This combats bacteria, algae, and other microorganisms.
After the disinfection process, a significant portion is reformed. As a result, the salt does not need to be added again constantly. Replenishing is mainly necessary when actual pool water is lost, for example, due to backwashing the sand filter, splashing, or partial water replacement.
Suitable for swimming pools up to 75 m³
This version of the AquaRite Pro Low Salt is suitable for private swimming pools with a water capacity of up to a maximum of 75,000 liters.
When sizing a salt electrolysis system, it is wise not to look solely at the maximum pool volume. The actual chlorine requirement is also influenced by:
water temperature;
number of swimmers;
daily filtration time;
amount of sunlight;
use of a pool cover;
organic load of the water;
desired swimming season.
A pool that, for example, lies uncovered in full sun all day and is used intensively requires more from an electrolysis system than a well-covered pool with limited use.
Automatic pH and ORP control with Sense & Dispense
In combination with the Hayward Sense & Dispense module, the AquaRite Pro becomes a particularly complete water treatment system.
Sense & Dispense continuously monitors two essential values of the pool water: pH and ORP/Redox.
pH control
A correct pH value is essential for effective disinfection. For most private swimming pools, a pH between approximately 7.2 and 7.6 is maintained.
If the pH becomes too high, the effectiveness of the chlorine produced decreases. A pH that is too low can make the pool water more aggressive to materials and, furthermore, less comfortable for swimmers.
The pH sensor therefore continuously measures the current value. In combination with suitable dosing equipment, pH-correcting agent can then be added automatically.
This keeps the water balance much more constant than when measuring and correcting solely by hand.
ORP / Redox control
The ORP or Redox sensor measures the oxidation potential of the pool water. This gives the system information about the current disinfecting effect of the water.
When sufficient disinfecting capacity is present, the AquaRite Pro does not need to continue producing chlorine unnecessarily. When the demand increases, for example after intensive swimming, the system can react accordingly.
As a result, chlorine production is tuned much more accurately to the current conditions in the pool.
Protection against overproduction of chlorine
The AquaRite Pro features an integrated function that helps prevent excessive chlorine production.
This is particularly interesting when the system is used in combination with ORP control. The installation then does not simply continue producing at a fixed percentage, but can better adjust production to the measured water quality.
This ensures more stable water treatment and prevents unnecessary load on the electrolysis cell.
Self-cleaning salt cell via polarity reversal
During the electrolysis process, lime can deposit on the electrodes of the salt cell. Especially with hard pool water, this can reduce performance over time.
Therefore, the AquaRite Pro Low Salt features automatic polarity reversal. In this process, the electrical polarity of the electrodes is periodically reversed, which limits lime buildup.
The automatic cleaning cycle can be reversed within a maximum of approximately 2 hours.
This reduces the required manual maintenance and contributes to a longer service life of the electrolysis cell.
However, the cell remains an important wear part. Periodic visual inspection is therefore still recommended, especially with hard water.
Service life of the electrolysis cell
Under the right conditions, the cell has a specified service life of up to approximately 10,000 operating hours.
The actual service life depends on, among other things:
daily operating time;
set production percentage;
salt concentration;
pH value;
calcium hardness;
water temperature;
maintenance;
quality of the water balance.
By correctly sizing the system and maintaining the water values properly, the service life of the cell can be significantly optimized.
Minimum flow of 2.9 m³/h
For safe operation, sufficient water must flow through the electrolysis cell.
The AquaRite Pro Low Salt requires a minimum water flow of approximately 2.9 m³ per hour.
The system therefore includes a flow detector / flow protection. If insufficient water flow is detected, chlorine production is protected.
This prevents the electrolysis cell from remaining active when, for example, the circulation pump is turned off or when the water flow has significantly decreased due to a blockage.
Minimum water temperature of approximately 15°C
The pool water must be at least approximately 15°C before the electrolysis is used.
This is especially important when starting up the pool in the spring. When the water is still very cold, the installation should not immediately be set to normal electrolysis production.
This must also be taken into account when winterizing.
Clear digital control box
The AquaRite Pro is controlled via a professional control box with a clear digital display.
Through the menu structure, the most important settings and current values can be viewed and adjusted. The system also displays the current operating status and any faults or warnings via LED indicators.
Operation is carried out via function keys with a water-resistant membrane, making the control box excellent for mounting in a pool equipment room.
Installation in the return pipe
The electrolysis cell is placed in the return pipe to the pool.
The pool water is filtered first and then flows through the remaining technical equipment before returning to the pool via the electrolysis cell.
A typical technical installation can be set up as follows, for example:
Swimming pool → circulation pump → sand filter → heat pump → measuring and dosing system → electrolysis cell → return to pool
The precise position of the Sense & Dispense sensors, dosing injection, and electrolysis cell must always be carried out according to Hayward's installation instructions.
Less manual chlorine addition
An important practical advantage of the AquaRite Pro Low Salt is that the system produces its own disinfectant.
As a result, you do not have to constantly place chlorine tablets in a chlorine floater or skimmer during normal operation. The regular manual addition of chlorine granules is also greatly reduced.
In combination with Sense & Dispense, a large part of the pH control can also be automated.
Of course, the pool will continue to require maintenance. Regularly checking pH, free chlorine, alkalinity, salt content, and other water values remains wise, even when automatic measuring and dosing equipment is present.
The transparent lid of the pool pump is designed to be easily opened with a quarter-turn and closed the same way. This prevents leaks at the pump’s pre-filter lid. Furthermore, it is very easy to see if there is any debris in the pool pump's pre-filter. In other words, you do not need to open the lid unnecessarily to check if there is dirt in the filter basket.
The pump can also be easily drained at the bottom to prevent damage during freezing weather. You can unscrew the plug from the pump without any tools.
The Hayward K FLO pool pump packaging always includes 50mm and 63mm diameter connections. This makes connecting it to the pool system very easy, unlike most other pool pumps.
In summary, this pool pump has been developed and equipped with the best and most convenient new features for a high-quality pool filtration pump.
Which pool pump do you need?
The power of the pump is determined based on the volume of the pool.
For example: for a 50m³ pool, it is best to circulate the water 3 times in 10 hours = 150m³ / 10h = 15m³/h. It is therefore best to choose a pump that pumps 15m³/h. These flow rates are determined with a certain resistance (pipes, bends, filter, etc.). We express this in head height. For our calculations, we use a 10m head height.
The K Flo 1hp pumps 15 – 18m³/h for a pool up to 60m³
Make sure you choose a pump that matches the filter you have.
For a sand filter up to 700mm, choose the K Flo 1hp
In other words, the right combination of pump and sand filter will ensure you have a proper flow rate for the pool water. In summary, a good flow rate in the sand filter results in crystal-clear water.
Technical specifications of the K Flo filter pump
Quarter-turn transparent screw lid – no hand tools required to open
Impeller and diffuser made of ultra-strong Noryl, resulting in highly resistant and corrosion-free material
This pool pump is compatible with chlorine and saltwater pools
Additionally, the K Flo can replace the Kripsol pump 1-on-1 without any modifications
Connection pieces included with the pump, in other words, easy to connect
BRAND
Hayward
PUMP FLOW RATE
Fixed
ELECTRICAL CONNECTION
Single Phase
POWER
1 hp
POOL VOLUME M³
60
The Hayward Aquarite Flo is a latest-generation salt electrolysis system. Specially developed by Hayward as a robust bridge between entry-level models and absolute top-of-the-range models, this salt electrolysis system is suitable for permanent in-ground or above-ground pools up to 75 m3. This salt electrolysis system is very simple and effective to use, and allows for automatic chlorine production. The salt production is adjustable to nine settings, so you will always find the perfect setting for your situation. When the system is set to 100%, the output is 16 grams per hour.
For which pools?
This Hayward Aquarite Flo is suitable for almost all types of swimming pools up to a maximum of 75 m3. However, in water warmer than 25ºC, the capacity decreases. In this case, add 25% to the volume of your pool. So, if you have a 75 m3 pool with warm water, for example due to a heat pump, it is best to choose a larger model.
Automated and safe
This salt electrolysis system features a self-cleaning titanium cell. In addition, the Hayward Aquarite Flo is equipped with a gas detector that automatically stops production if there is no flow. Finally, the Hayward Aquarite Flo includes a pool cover mode. This allows you to set a different production level when the pool is not in use, thus preventing overproduction.
Other features
Equipped with an alarm for low salt levels
Switches off automatically in the event of no flow or insufficient flow
Made in Europe
Equipped with 63 mm connections
Minimum flow: 3 m3/h
Maximum water temperature: 40 degrees
Minimum water temperature: 5 degrees
Dimensions of the device: 40 x 40 x 21 cm (LxHxD)
Power supply: 220-240 W (power cord with plug)
Optional extensions
And this is where it gets really interesting! The Hayward Aquarite Flo is equipped with extra options for full disinfection automation. The options below are available and compatible with the system, giving you everything you need for complete automation of your pool.
The Hayward floor drain helps drain water from the deepest point of your pool to the filtration system. By also incorporating water from the lower water layers into the circulation, the floor drain supports a more even distribution of heat and water treatment chemicals.
This version is suitable for underground pools with a concrete or liner construction. The housing is made of ABS and has an anthracite-colored finish. With a specified flow rate range of 5 to 15 m³/h, the floor drain can be incorporated into a correspondingly designed pool system.
Supports circulation from the floor
Good water circulation involves both the surface water and the deeper water layers in the filtration. The floor drain drains water from underneath the pool, after which it returns via the system and the return jets.
This helps reduce temperature differences between the lower and upper water layers and supports the distribution of water treatment chemicals. The final performance depends on the cooperation between the floor drain, skimmers, return jets, and pool pump.
Suitable for concrete and liner pools
The floor drain is built into the deepest point of the pool during construction. This version is suitable for concrete and liner constructions. A correct connection and sealing are important, because the drain is less easily accessible after the pool floor has been finished.
Therefore, take the position and the pipe route into account in the pool design beforehand. Check which installation and sealing components are required for your pool floor construction.
Also usable for draining
In addition to the daily circulation, the floor drain can be used to drain pool water when emptying the pool. For this, the pipework must be properly designed.
The floor drain forms the suction point; the actual draining of the water is controlled via the connected system. The possibilities depend on the pump, valves, and drainage route.
ABS housing with two connection positions
The floor drain is made of ABS and has an anthracite color that matches dark or gray pool liners well. The side outlet has a 2″ female thread connection. On the underside, there is a 1½″ female thread connection.
These connection positions offer options for the pipe installation. When connecting and optionally sealing off an unused connection, follow the manufacturer's installation instructions. The safe execution of the suction must also be coordinated with the entire pool system.
The Hayward floor drain helps drain water from the deepest point of your pool to the filtration system. By also circulating water from the lower layers, the floor drain supports a more even distribution of heat and water treatment chemicals.
This version is suitable for underground pools with a concrete or liner construction. The housing is made of ABS and has an anthracite finish. With a specified flow rate range of 5 to 15 m³/h, the floor drain can be incorporated into a suitably designed pool system.
Supports circulation from the pool floor
Good water circulation involves both the surface water and the deeper layers of water in the filtration process. The floor drain draws water from underneath the pool, after which it returns through the system and the return inlets.
This helps reduce temperature differences between the lower and upper layers of water and supports the distribution of water treatment chemicals. The final performance depends on the interaction between the floor drain, skimmers, return inlets, and pool pump.
Suitable for concrete and liner pools
The floor drain is installed at the deepest point of the pool during construction. This version is suitable for concrete and liner constructions. Proper connection and sealing are important, as the drain is less easily accessible after the pool floor has been finished.
Therefore, take the position and pipe route into account when designing the pool. Check which installation and sealing components are required for your pool floor construction.
Also suitable for draining the pool
In addition to daily circulation, the floor drain can be used to drain pool water when emptying the pool. For this purpose, the piping system must be appropriately configured.
The floor drain serves as the suction point; the actual draining of the water is controlled via the connected system. The possibilities depend on the pump, valves, and drainage route.
ABS housing with two connection positions
The floor drain is made of ABS and has an anthracite color that blends well with dark or gray pool liners. The side outlet has a 2″ female thread connection. On the underside, there is a 1½″ female thread connection.
These connection positions offer flexibility for pipe installation. When connecting and, if necessary, sealing off an unused connection, follow the manufacturer's installation instructions. The safe operation of the suction must also be coordinated with the entire pool system.
The Hayward floor drain helps drain water from the deepest point of your pool to the filtration system. By also incorporating water from the lower water layers into the circulation, the floor drain supports a more even distribution of heat and water treatment chemicals.
This version is suitable for underground pools with a concrete or liner construction. The housing is made of ABS and has an anthracite-colored finish. With a specified flow rate range of 5 to 15 m³/h, the floor drain can be incorporated into a correspondingly designed pool system.
Supports circulation from the floor
Good water circulation involves both the surface water and the deeper water layers in the filtration. The floor drain drains water from underneath the pool, after which it returns via the system and the return inlets.
This helps to limit temperature differences between the lower and upper water layers and supports the distribution of water treatment chemicals. The final performance depends on the cooperation between the floor drain, skimmers, return inlets, and pool pump.
Suitable for concrete and liner pools
The floor drain is built into the deepest point of the pool during construction. This version is suitable for concrete and liner constructions. A correct connection and sealing are important, because the drain is less easily accessible after the pool floor has been finished.
Therefore, take the position and the pipe route into account in the pool design beforehand. Check which installation and sealing components are required for your pool floor construction.
Also usable for draining
In addition to the daily circulation, the floor drain can be used to drain pool water when emptying the pool. For this, the pipework must be properly configured.
The floor drain forms the suction point; the actual draining of the water is managed via the connected system. The possibilities depend on the pump, valves, and drainage route.
ABS housing with two connection positions
The floor drain is made of ABS and has an anthracite color that blends nicely with dark or gray pool liners. The side outlet has a 2″ female thread connection. On the underside, there is a 1½″ female thread connection.
These connection positions offer options for the pipe installation. When connecting and optionally sealing off an unused connection, follow the manufacturer's installation instructions. The safe execution of the suction must also be coordinated with the entire pool system.
The Hayward floor drain helps drain water from the deepest point of your pool to the filtration system. By also incorporating water from the lower water layers into the circulation, the floor drain supports a more even distribution of heat and water treatment chemicals.
This version is suitable for underground pools with a concrete or liner construction. The housing is made of ABS and has an anthracite-colored finish. With a specified flow rate range of 5 to 15 m³/h, the floor drain can be incorporated into a correspondingly designed pool system.
Supports circulation from the floor
Good water circulation involves both the surface water and the deeper water layers in the filtration. The floor drain drains water from underneath the pool, after which it returns via the system and the return jets.
This helps to reduce temperature differences between the lower and upper water layers and supports the distribution of water treatment chemicals. The final performance depends on the cooperation between the floor drain, skimmers, return jets, and pool pump.
Suitable for concrete and liner pools
The floor drain is built into the deepest point of the pool during construction. This version is suitable for concrete and liner constructions. A correct connection and sealing are important, because the drain is less easily accessible after the pool floor has been finished.
Therefore, take the position and the pipe route into account in the pool design beforehand. Check which installation and sealing components are required for your floor construction.
Also usable for draining
In addition to the daily circulation, the floor drain can be used to drain pool water when emptying the pool. For this, the pipework must be appropriately designed.
The floor drain forms the suction point; the actual draining of the water is controlled via the connected system. The possibilities depend on the pump, valves, and drainage route.
ABS housing with two connection positions
The floor drain is made of ABS and has an anthracite color that blends nicely with dark or gray pool liners. The side outlet has a 2″ female thread connection. On the underside, there is a 1½″ female thread connection.
These connection positions offer options for the pipe installation. When connecting and optionally sealing off an unused connection, follow the manufacturer's installation instructions. The safe execution of the suction must also be coordinated with the entire pool system.
The Astral ABS high-level skimmer is suitable for installation in all types of swimming pools, such as wooden pools, liner pools, and prefabricated pools.
With this model, you can achieve a water level that is on average 5 to 10 cm higher than when using standard skimmers.
Astral high-level skimmers are of the highest quality, ensuring there are no leakage issues when the skimmers are installed correctly.
Tip: we recommend installing one skimmer per 25 m³, with a maximum flow of 7.5 m³/hour.
What does a pool skimmer do?
A skimmer in a swimming pool handles the suction of water from the pool.An absolute must for your pool, as 80% of contamination occurs on the surface.By installing a skimmer, surface contaminants are immediately carried away to the filter.
Inside the skimmer housing is the skimmer basket, which catches large debris such as twigs and leaves so that they do not pass through your filter pump.The skimmer basket must be checked regularly and cleaned when necessary to ensure proper water flow.
The Hayward High-Water Line Skimmer is a high-quality, universal skimmer suitable for installation in swimming pools with liner finishes and concrete walls. This design makes it possible to bring the water level 5 to 10 cm higher than with standard skimmers, which ensures a sleeker water surface and a more aesthetically pleasing pool.
The skimmer is manufactured from UV-resistant, impact-resistant white ABS plastic, and designed to withstand chlorine, sunlight, and temperature fluctuations for years. Thanks to a precisely sealing weir, a spacious skimmer basket, and various connection options, this skimmer offers excellent performance in any type of pool configuration.
🔧 What does a pool skimmer do?
A skimmer continuously draws in surface water – where up to 80% of all contaminants are found. Think of leaves, insects, pollen, sunscreen residue, and dust.The contaminants are transported via the skimmer to the filtration system, while the skimmer basket catches larger debris to prevent damage to the pump or clogging of pipes.
Regular cleaning of the basket is essential to ensure proper water flow and maintain filtration efficiency.
The Hayward adjustable return inlet dark grey is a high-quality swimming pool inlet that ensures efficient water circulation in your pool. This inlet is made from durable ABS material and is suitable for installation in the pool wall. Thanks to the adjustable (directional) nozzle, you can determine the direction of the water flow yourself, which ensures optimal water distribution.
The Hayward adjustable return inlet light grey is a high-quality pool inlet that ensures efficient water circulation in your swimming pool. This inlet is made of durable ABS material and is suitable for installation in the pool wall. Thanks to the adjustable (directional) nozzle, you can determine the direction of the water flow yourself, which ensures optimal water distribution.
The Hayward adjustable white inlet nozzle is a high-quality pool inlet that ensures efficient water circulation in your swimming pool. This inlet is manufactured from durable ABS material and is suitable for installation in the pool wall. Thanks to the adjustable (directional) nozzle, you can determine the direction of the water flow yourself, which ensures optimal water distribution.
The transparent lid of the pool pump is designed to be easily opened with a quarter-turn and closed the same way. This prevents leaks at the pump’s pre-filter lid. Furthermore, it is very easy to see if there is any dirt in the pool pump’s pre-filter. In other words, you do not need to open the lid unnecessarily to check if there is dirt in the filter basket.
You can also easily empty the pump at the bottom to prevent damage during freezing weather. You can unscrew the plug from the pump without tools.
The packaging of the Hayward K FLO pool pump always includes 50mm and 63mm diameter connections. This makes the connection to the pool installation very simple, unlike most other pool pumps.
In summary, this pool pump has been developed and equipped with the best and most convenient new features for a good pool filtration pump.
Which pool pump do you need?
The power of the pump is determined based on the volume of the pool.
For example: for a 50m³ pool, it is best to circulate the water 3 times in 10h = 150m³ / 10h = 15m³/h. You should therefore choose a pump that pumps 15m³/h. These flow rates are determined with a certain resistance (pipes, bends, filter, etc.). We express this in head height. For this calculation, we use 10m head height.
The K Flo 0.33hp pumps 7 – 10 m³/h for a pool up to 20m³
Make sure you choose a pump that matches the filter you have.
If you have a sand filter up to 400mm, choose the K Flo 0.33 – 0.5hp
In other words, the right combination of pump and sand filter will ensure that you have a good flow rate for the pool water. In short, a good flow rate in the sand filter will ensure crystal clear water.
Technical specifications of the K Flo filter pump
Quarter-turn transparent screw lid – no hand tools required to open
Impeller and diffuser made of extremely strong Noryl, resulting in very highly resistant and corrosion-free material
This pool pump is compatible with chlorine water and salt water pools
Additionally, the K Flo can replace the Kripsol pump 1-on-1 without any modifications
Connection pieces included with the pump, in other words, easy to connect
BRAND
Hayward
PUMP FLOW RATE
Fixed
ELECTRICAL CONNECTION
Single Phase
POWER
0.33 hp
POOL VOLUME M³
20
The transparent lid of the pool pump is designed to be easily opened with a quarter-turn and closed in the same way. This prevents leaks at the lid of the pump's pre-filter. On the other hand, it makes it very easy to see if there is dirt in the pre-filter of the swimming pool pump. In other words, you do not need to open the lid unnecessarily to check if there is dirt in the filter basket.
At the bottom of the pump, you can also easily empty it to prevent damage during freezing weather. You can unscrew the plug from the pump without tools.
The Hayward K FLO swimming pool pump comes with fittings in 50mm and 63mm diameters included. This ensures that the connection to the pool installation is very simple, unlike most other pool pumps.
In summary, this swimming pool pump has been developed and equipped with the best and most convenient new features for a high-quality swimming pool filtration pump.
Which swimming pool pump do you need?
The power of the pump is determined based on the volume of the pool.
For example: for a 50m³ pool, it is best to circulate the water 3 times in 10 hours = 150m³ / 10h = 15m³/h. It is therefore best to choose a pump that pumps 15m³/h. These flow rates are determined with a certain resistance (pipes, elbows, filter, etc.). We express this in head pressure. For calculations, we use 10m head pressure.
A K Flo 0.5HP pumps 10 – 12m³/h for a pool up to 30m³
Make sure you choose a pump that matches the filter you have.
For a sand filter up to 500mm, choose the K Flo 0.5HP
In other words, the right combination of pump and sand filter will ensure that you have a good flow rate for the pool water. In summary, a good flow rate in the sand filter ensures crystal clear water.
Technical features of the K Flo filter pump
Quarter-turn transparent screw lid – this means no hand tools are needed to open it
Impeller and diffuser made of extremely strong Noryl, resulting in a very durable, resistant, and corrosion-free material
This pool pump is compatible with chlorine and saltwater pools
Additionally, the K Flo can replace the Kripsol pump 1-on-1 without any modifications
Connection fittings included with the pump, in other words, easy to connect
BRAND
Hayward
PUMP FLOW RATE
Fixed
ELECTRICAL CONNECTION
Single Phase
POWER
0.50 HP
POOL VOLUME M³
30
The transparent lid of the pool pump is designed to be easily opened with a quarter-turn and closed the same way. This prevents leaks at the pump’s pre-filter lid. Furthermore, it makes it very easy to see if there is any dirt in the pool pump’s pre-filter. In other words, you do not need to unnecessarily open the lid to check if there is dirt in the filter basket.
You can also easily empty the pump at the bottom to prevent damage during freezing weather. You can unscrew the plug from the pump without any tools.
The Hayward K FLO pool pump packaging always includes connections in 50mm and 63mm diameters. This makes connecting to the pool system very simple, unlike most other pool pumps.
In summary, this pool pump is developed and equipped with the best and most convenient new features for a high-quality pool filtration pump.
Which pool pump do you need?
The power of the pump is determined based on the volume of the pool.
For example: for a 50m³ pool, it is best to circulate the water 3 times in 10 hours = 150m³ / 10h = 15m³/h. It is therefore best to choose a pump that pumps 15m³/h. These flow rates are determined with a certain resistance (pipes, bends, filter, etc.). We express this in terms of head height. For calculation purposes, we use a 10m head height.
The K Flo 0.33HP pumps 7 – 10 m³/h for a pool up to 20m³
A K Flo 0.5HP pumps 10 – 12m³/h for a pool up to 30m³
K Flo 0.75HP pumps 13 – 15m³/h for a pool up to 45m³
The K Flo 1HP pumps 15 – 18m³/h for a pool up to 60m³
And a K Flo 1.5HP pumps 22 – 25m³/h for a pool up to 75m³
Make sure you choose a pump that matches your existing filter. If you have a sand filter up to 400mm, choose the K Flo 0.33 – 0.5HP
With a sand filter up to 600mm, choose the K Flo 0.75HPIn other words, the right combination of pump and sand filter will ensure you have a good flow rate for your pool water. In summary, a good flow rate in the sand filter ensures crystal clear water.
Technical features of the K Flo filter pump
Quarter-turn transparent screw lid – no hand tools required to open
Impeller and diffuser made of ultra-strong Noryl, resulting in highly resistant and corrosion-free material
This pool pump is compatible with chlorine and saltwater pools
Additionally, the K Flo can replace the Kripsol pump 1-to-1 without any modifications
Connection fittings included with the pump, in other words, easy to connect
BRAND
Hayward
PUMP FLOW RATE
Fixed
ELECTRICAL CONNECTION
Single Phase
POWER
0.75 HP
POOL VOLUME M³
45
The transparent lid of the pool pump is designed to be easily opened with a quarter-turn and closed the same way. This prevents leaks at the pump’s pre-filter lid. Furthermore, it makes it very easy to see if there is any debris in the pool pump's pre-filter. In other words, you do not need to open the lid unnecessarily to check if there is dirt in the filter basket.
You can also easily empty the pump from the bottom to prevent damage during freezing weather. You can unscrew the plug from the pump without any tools.
The Hayward K FLO pool pump package always includes connections in 50mm and 63mm diameters. This makes connecting to the pool installation very simple, unlike most other pool pumps.
In summary, this pool pump has been developed and equipped with the best and most convenient new features for a high-quality pool filtration pump.
Which pool pump do you need?
The power of the pump is determined based on the volume of the pool.
For example: for a 50m³ pool, it is best to circulate the water 3 times in 10 hours = 150m³ / 10h = 15m³/h. Therefore, it is best to choose a pump that pumps 15m³/h. These flow rates are determined with a certain resistance (pipes, elbows, filter, etc.). We express this as head height. For the sake of calculation, we use 10m head height.
A K Flo 1.5HP pump 22 – 25m³/h for a pool up to 75m³
Ensure that you choose a pump that matches the filter you have.
For sand filters larger than 700mm, choose the K Flo 1.5HP pool pump
In other words, the right combination of pump and sand filter will ensure that you have a good flow rate for the pool water. In summary, a good flow rate in the sand filter results in crystal-clear water.
Technical features of the K Flo filter pump
Quarter-turn transparent screw lid – no hand tools required to open
Impeller and diffuser made of ultra-strong Noryl, resulting in highly resistant and corrosion-free material
This pool pump is compatible with chlorine and saltwater pools
Additionally, the K Flo can replace the Kripsol pump 1-to-1 without modifications
Connection pieces included with the pump, in other words, easy to connect
BRAND
Hayward
PUMP FLOW RATE
Fixed
ELECTRICAL CONNECTION
Single Phase
POWER
1.5 HP
POOL VOLUME M³
75
The Hayward K-Flo VSTD Swimming Pool Pump is an innovative and energy-efficient solution for circulating and filtering pool water. With its classic and robust design, this pump delivers a high flow rate, making it suitable for pools up to 80m³. Thanks to the variable speed (VSTD), you determine how much water is filtered, which drastically reduces energy consumption – by up to 90% compared to standard pool pumps. This makes the K-Flo VSTD not only efficient, but also environmentally friendly and kind to your energy bill.The extra-large pre-filter minimizes the need for frequent cleaning, while the corrosion- and salt-resistant materials ensure durability, even in the most challenging pool conditions. The pump offers whisper-quiet operation, programmable settings, and advanced features such as a skimming option and digital connectivity for external devices.With the Hayward K-Flo VSTD Swimming Pool Pump, you get a reliable, quiet, and energy-efficient pump that is ideal for small to medium-sized pools. Choose quality, durability, and a lower energy bill with this advanced ECO model.
The Hayward Powerline side mount sand filter is a high-quality solution for filtering the water in your swimming pool or spa. With its durable construction and premium materials, this sand filter offers years of trouble-free use.The side-mount design ensures easy installation and maintenance, allowing you to spend more time in the water and less time maintaining your filter. The filter is equipped with a transparent cover for easy inspection of the filter media and a removable strainer basket for catching large debris.The Hayward Powerline side mount sand filter is available in various sizes, so you can choose the right filter for your specific pool or spa. The filter is designed to provide maximum flow and filtration with minimal pressure drop, resulting in efficient operation and a longer lifespan for your pool pump.With the Hayward Powerline side mount sand filter, you are assured of clean and clear water in your pool or spa, while enjoying your time in the water without having to worry about water quality. The filter is easy to operate and maintain, so you can always enjoy a perfect swimming experience.
The Hayward Powerline side mount sand filter is a high-quality solution for filtering water in your swimming pool or spa. With its durable construction and premium materials, this sand filter offers years of trouble-free use.The side-mount design ensures easy installation and maintenance, allowing you to spend more time in the water and less time maintaining your filter. The filter features a transparent cover for easy inspection of the filter media and a removable strainer basket for catching large debris.The Hayward Powerline side mount sand filter is available in various sizes, so you can choose the right filter for your specific pool or spa. The filter is designed to provide maximum flow and filtration with minimal pressure drop, resulting in efficient operation and a longer lifespan for your pool pump.With the Hayward Powerline side mount sand filter, you are assured of clean and clear water in your pool or spa, allowing you to enjoy your time in the water without having to worry about water quality. The filter is easy to operate and maintain, so you can always enjoy a perfect swimming experience.
The Hayward Powerline side mount sand filter is a high-quality solution for filtering the water in your swimming pool or spa. With its durable construction and high-grade materials, this sand filter offers years of trouble-free use.The side-mount design ensures easy installation and maintenance, allowing you to spend more time in the water and less time maintaining your filter. The filter features a transparent lid for easy inspection of the filter media and a removable strainer basket for catching large debris.The Hayward Powerline side mount sand filter is available in various sizes, so you can choose the right filter for your specific pool or spa. The filter is designed to provide maximum flow and filtration with minimal pressure drop, resulting in efficient operation and a longer lifespan for your pool pump.With the Hayward Powerline side mount sand filter, you are assured of clean and clear water in your pool or spa, while you enjoy your time in the water without having to worry about water quality. The filter is easy to operate and maintain, so you can always enjoy a perfect pool experience.
The Hayward Powerline side mount sand filter is a high-quality solution for filtering water in your swimming pool or spa. With its durable construction and premium materials, this sand filter offers years of trouble-free use.The side-mount design ensures easy installation and maintenance, allowing you to spend more time in the water and less time maintaining your filter. The filter features a transparent cover for easy inspection of the filter media and a removable strainer basket to catch large debris.The Hayward Powerline side mount sand filter is available in various sizes, so you can choose the right filter for your specific pool or spa. The filter is designed to provide maximum flow and filtration with minimal pressure drop, resulting in efficient operation and a longer service life for your pool pump.With the Hayward Powerline side mount sand filter, you are assured of clean and clear water in your pool or spa, while you enjoy your time in the water without having to worry about water quality. The filter is easy to operate and maintain, so you can always enjoy a perfect swimming pool experience.
The Hayward Powerline side mount sand filter is a high-quality solution for filtering water in your swimming pool or spa. With its durable construction and premium materials, this sand filter offers years of trouble-free use.The side-mount design ensures easy installation and maintenance, allowing you to spend more time in the water and less time maintaining your filter. The filter is equipped with a transparent cover for easy inspection of the filter media and a removable strainer basket to catch large debris.The Hayward Powerline side mount sand filter is available in various sizes, so you can choose the right filter for your specific pool or spa. The filter is designed to provide maximum flow and filtration with minimal pressure drop, resulting in efficient operation and a longer service life for your pool pump.With the Hayward Powerline side mount sand filter, you are assured of clean and clear water in your pool or spa, allowing you to enjoy your time in the water without having to worry about water quality. The filter is easy to operate and maintain, so you can always enjoy a perfect swimming experience.
The Hayward Powerline top mount sand filter is a reliable and efficient solution for filtering the water in your pool or spa. With its durable construction and high-quality materials, this sand filter offers years of trouble-free use.The top-mount design ensures easy installation and maintenance, allowing you to spend more time in the water and less time maintaining your filter. The sand filter features a transparent cover for easy inspection of the filter media and a removable strainer basket to catch large debris.The Hayward Powerline top mount sand filter is available in various sizes, so you can choose the right filter for your specific pool or spa. The filter is designed to provide maximum flow and filtration with minimal pressure drop, resulting in efficient operation and a longer service life for your pool pump.With the Hayward Powerline top mount sand filter, you are assured of clean and clear water in your pool or spa, while enjoying your time in the water without having to worry about water quality.
The Hayward Powerline top mount sand filter is a reliable and efficient solution for filtering water in your swimming pool or spa. With its durable construction and high-quality materials, this sand filter offers years of trouble-free use.The top-mount design ensures easy installation and maintenance, allowing you to spend more time in the water and less time maintaining your filter. The sand filter is equipped with a transparent valve for easy inspection of the filter media and a removable strainer basket to collect large debris.The Hayward Powerline top mount sand filter is available in various sizes, so you can choose the right filter for your specific pool or spa. The filter is designed to provide maximum flow and filtration with minimal pressure drop, resulting in efficient operation and a longer service life for your pool pump.With the Hayward Powerline top mount sand filter, you are assured of clean and clear water in your pool or spa, while you enjoy your time in the water without having to worry about water quality.
