The W’eau SPO-650 polyester side mount sand filter is one of the best in its class and a popular choice for efficiently and thoroughly cleaning swimming pool water. This sand filter ensures that the water in your pool remains clear and clean, thanks to its fine filtration of 25-30 microns, which removes even the smallest impurities from the water. The filter vessel is made of high-quality polyester and finished with a smooth gelcoat fiberglass, ensuring a long service life and excellent resistance to various weather conditions. The SPO-650 sand filter is equipped with a side mount connection, meaning the 6-way valve is mounted on the side of the filter. This type of mounting ensures better distribution of water over the sand bed, resulting in more efficient and thorough filtration. Moreover, the side mount construction makes maintenance easier, partly thanks to the air vent and transparent lid, which allow you to look into the filter without having to open it. With a flow rate of 16 m³ per hour, the W’eau SPO-650 is suitable for larger swimming pools with a capacity of up to 64,000 liters. This makes the filter ideal for both private and commercial pools that require powerful and durable filtration. Functions of the 6-way valve: Filter: Water flows from top to bottom through the filter bed, removing dirt and impurities. Backwash: Water flows from bottom to top through the filter bed to clean the filter material and remove accumulated dirt. Rinse: Flushes away dirt after backwashing, so the filter is ready for the next use. Close: Closes all filter inlets and outlets when not in use. Waste: Drains pool water directly to the sewer, for example, to lower the water level. Recirculate: Circulates the water without filtering it, useful for chemical treatments such as algae control. Scope of delivery: Polyester sand filter vessel 6-way valve with all functions Connection materials for 50 mm glue connection and 38 mm threaded connection Manual for easy installation The W’eau SPO-650 is the perfect choice for those looking for a durable and efficient sand filter for larger swimming pools. With its robust polyester construction, precise filtration, and simple maintenance, this sand filter ensures clear and clean water, allowing you to optimally enjoy your swimming pool.

Read more less

Enjoy clean and clear pool water with the W’eau HDPE-500 side mount sand filter. This powerful filter is ideal for thoroughly cleaning pool water, so you can cool off in crystal-clear water on warm days. The W’eau HDPE-500 is designed for both above-ground and in-ground pools up to a maximum of 48,000 liters and is resistant to high pressure and heavy loads. Made of high-quality polyethylene, this filter vessel is durable and resistant to weather conditions. Thanks to the fine filtration of 25-30 microns, even the smallest impurities are removed from the pool water. Effective Filtration thanks to Side-Mount Design Unlike top-mount filters, the W’eau HDPE-500 features a side-mount design, where the 6-way valve is mounted on the side of the filter. This design ensures better water distribution over the sand bed, making filtration more efficient and thorough. Furthermore, the side-mount design makes maintenance easier. The transparent filter lid and the air vent ensure that you can always easily check the status of the filter without opening it. Versatile 6-Way Valve The W’eau HDPE-500 is equipped with a versatile 6-way valve, allowing you to easily switch between different filter functions. The six settings are: Filter: Water flows from top to bottom through the sand bed, removing dirt and impurities. Backwash: The sand bed is rinsed clean by letting water flow through the filter in the opposite direction. Rinse: Dirty water is flushed away after backwashing, so the filter is ready for use. Close: Closes all inlets and outlets when the filter is not in use. Waste: Drains pool water directly to the sewer, ideal for lowering the water level. Circulate: Circulates the water without passing it through the filter, ideal for chemical treatments such as algae control. Summary: The W’eau HDPE-500 side mount sand filter is a powerful and reliable solution for keeping pool water clean. With a capacity of 12 m³/h, this filter is suitable for pools up to 48,000 liters and offers efficient and effective filtration. Thanks to the side-mount design, the convenient 6-way valve, and the durable material, this sand filter is ideal for both private and professional pools.

Read more less

The W'eau S-500 fiberglass-reinforced side mount sand filter is a powerful and durable pool filter for medium to large private swimming pools. With a maximum flow rate of 12 m³ per hour, this filter is suitable for pools up to 48,000 liters and forms the ideal basis for a professional and efficient pool installation. Thanks to the fine filtration of 25 to 30 microns, dirt particles such as sand, dust, leaves, insects, and other contaminants are effectively removed from the pool water, ensuring you can always enjoy clear and hygienic swimming water. The filter tank is manufactured from high-quality polyethylene (PE) reinforced with fiberglass/polyester, making it exceptionally resistant to high pressure, UV radiation, and weather conditions. This reinforced construction ensures a long service life and makes the filter suitable for intensive use for many years. The side mount design offers significant advantages over a top mount filter. Because the 6-way valve is located on the side of the filter tank, water is distributed more evenly across the entire filter bed. This allows for optimal utilization of the filter media, results in less pressure loss, and provides more efficient filtration. Furthermore, the top of the filter remains completely unobstructed, making maintenance and replacing the filter media significantly easier. The W'eau S-500 is equipped with a professional 6-way valve that allows you to easily switch between the various filter functions: Filter – normal filtration of the pool water. Backwash – cleans the filter media by sending water through the filter in reverse. Rinse – flushes away remaining dirt after backwashing. Waste – drains pool water directly. Recirculate – circulates water without passing through the filter bed. Close – shuts off all water flows. For added ease of use, the filter features a transparent filter lid, an automatic air vent, a sight glass, and a pressure gauge. This allows you to easily monitor the filter pressure and see immediately when a backwash is needed. The filter is suitable for use with filter sand, filter glass, and glass beads. Filter glass in particular offers finer filtration, lower water consumption during backwashing, and a longer lifespan than traditional filter sand. With the standard 50 mm connections, the W'eau S-500 is easy to combine with almost any pool pump, heat pump, UV-C system, or saltwater system.

Read more less

The W’eau SPO-900 polyester side mount sand filter is a powerful and efficient solution for filtering large swimming pools. With a maximum flow rate of 32 m³ per hour, this sand filter is perfect for pools up to 128,000 liters. The filtration capacity of 25-30 microns ensures that even the smallest impurities are filtered out of the water, so your pool water always remains clean and clear. This makes the W’eau SPO-900 ideal for intensive use in large in-ground and above-ground pools. The side mount filter differs from other sand filters in that the 6-way valve is located on the side of the filter instead of the top. This ensures a more efficient distribution of water over the sand bed, leading to better filtration. The filter is made of laminated polyester, making it resistant to heavy loads and long-term use. Furthermore, the transparent filter lid is equipped with an air bleeder, so you can easily check the condition of the filter without having to open it. With a capacity of 400 kg of filter media and standard 63 mm connections, the W’eau SPO-900 is easy to install and offers maximum performance for large pools. The filter vessel has a height of 110 cm and a diameter of 90 cm, which provides sufficient capacity to filter large volumes of water. Main features: Maximum flow rate: 32 m³/h Maximum pool volume: Suitable for pools up to 128,000 liters (128 m³) Filtration capacity: 25-30 microns (for fine filtration) Filter vessel material: Laminated polyester Sand filter type: Side Mount for more efficient water distribution Filter vessel capacity: 400 kg of filter media (filter sand or filter glass) Standard connection: 63 mm Functions of the 6-way valve: Filter: Water flows from top to bottom through the sand bed, removing dirt and impurities. Backwash: Water flows in reverse to flush the sand bed and remove accumulated dirt. Rinse: Flushes out dirt after backwashing so the filter is ready for use. Close: Closes all filter inlets and outlets when not in use. Waste: Drains pool water directly to the sewer, for example, to lower the water level. Recirculate: Circulates the water without passing through the sand bed, useful for chemical treatments such as algae control. The W’eau SPO-900 is an ideal solution for large pools that require efficient and sustainable filtration. With its robust construction and powerful filtration capacity, this side mount sand filter is perfect for intensive use and simple maintenance, allowing you to enjoy clear and clean pool water for years to come.

Read more less

The W'eau V-650 fiberglass-reinforced top mount sand filter is a powerful and durable sand filter, designed for medium to large private swimming pools. With a maximum filter capacity of 16 m³ per hour, this filter is suitable for pools up to 64,000 litres and ensures excellent water quality throughout the entire swimming season. Thanks to the filtration fineness of 25 to 30 microns, dirt particles such as sand, dust, leaves, insects, and other suspended contaminants are efficiently removed from the pool water. The filter tank is manufactured from high-quality polyethylene (PE) reinforced with fiberglass/polyester. This robust construction offers high pressure resistance, excellent UV resistance, and a long service life. As a result, the filter tank remains dimensionally stable and reliable for years, even with intensive use and changing weather conditions. Thanks to the Top Mount design, the 6-way valve is mounted on top of the filter tank. This keeps the installation compact, making the filter ideal for technical rooms with limited installation space. The internal diffuser ensures water is distributed evenly over the filter bed, allowing for optimal use of the filter material and efficient filtration. The professional 6-way valve features all the functions required for optimal pool maintenance: Filter – normal filtration of the swimming pool water. Backwash – cleans the filter material by reversing the water flow. Rinse – flushes away dirt residues after backwashing. Waste – drains swimming pool water directly. Recirculate – circulates the water without filtration. Close – shuts off all water flows. The W'eau V-650 is suitable for filter sand, filter glass, glass beads, and filter balls, allowing you to choose the filter medium that best suits your pool and maintenance preference. For extra ease of use, the filter features a built-in pressure gauge, a large drain plug, and a sturdy clamp ring that allows the 6-way valve to be easily removed for maintenance or replacing the filter material.

Read more less

The W'eau S-650 fiberglass-reinforced side-mount sand filter is a professional sand filter for medium-sized and large private swimming pools. With a maximum flow rate of 16 m³ per hour, this filter is suitable for pools up to 64,000 liters and offers an excellent combination of powerful filtration, durability, and ease of use. Thanks to the fine filtration of 25 to 30 microns, dirt particles such as sand, leaves, insects, dust, and other contaminants are effectively removed from the pool water, allowing you to enjoy crystal-clear swimming water all season long. The filter vessel is manufactured from high-quality polyethylene (PE) reinforced with fiberglass/polyester. This reinforced construction ensures high pressure resistance, excellent UV resistance, and a long service life. This makes the W'eau S-650 resistant to intensive use and varying weather conditions. The side-mount design offers several advantages over a top-mount sand filter. Because the 6-way valve is mounted on the side of the filter vessel, the water is distributed evenly over the entire filter bed. This ensures optimal use of the filter material, results in less pressure loss, and achieves more efficient filtration. Furthermore, the top of the filter remains clear, making it easier to replace filter material and perform maintenance. The W'eau S-650 is equipped with a professional 6-way valve, which allows you to easily switch between the various filter functions: Filter – normal filtration of the pool water. Backwash – cleans the filter material by flushing water through the filter vessel in reverse direction. Rinse – flushes away remaining dirt after backwashing. Waste – drains pool water directly without filtering. Circulate – circulates water without passing through the filter bed. Close – shuts off all water flows. For added convenience, the filter features a transparent filter lid, an automatic air release valve, a pressure gauge, and a sight glass. This allows you to easily check the filter pressure and see immediately when it is time to perform a backwash. The filter is suitable for filter sand, filter glass, glass beads, and filter balls, allowing you to choose the filter medium that best suits your pool installation. Thanks to the standard 50 mm connections, the W'eau S-650 is easy to combine with almost any pool pump, heat pump, UV-C system, or saltwater system.

Read more less

The W’eau SPO-750 polyester side mount sand filter is a high-quality solution for effectively filtering large swimming pools. This powerful sand filter has a maximum flow rate of 22 m³ per hour, making it ideal for cleaning pools with a capacity of up to 88,000 liters. With a fine filtration of 25-30 microns, this sand filter ensures that even the smallest impurities are filtered out of the water, keeping the pool water clear and clean. The side mount filter is equipped with a 6-way valve, which is located on the side of the filter. This design ensures better distribution of water over the sand bed, resulting in more efficient and effective filtration compared to a top mount filter. Furthermore, the side mount filter is easier to maintain thanks to the transparent filter lid with an air vent, allowing you to easily check the condition of the filter without opening the system. The filter vessel is made of laminated polyester, which provides a robust and durable construction that can withstand high loads. This makes the W’eau SPO-750 suitable for intensive use with large pools, both above-ground and in-ground. The filter vessel has a height of 98 cm and a diameter of 75 cm, and offers space for as much as 230 kg of filter media. Functions of the 6-way valve: Filter: Water flows from top to bottom through the sand bed, removing dirt and impurities. Backwash: Water flows in the opposite direction to rinse the sand bed clean and remove accumulated dirt. Rinse: Flushes away dirt after backwashing so that the filter is ready for use. Close: Closes all inlets and outlets of the filter when it is not in use. Waste: Drains pool water directly to the sewer, for example, to lower the water level. Circulate: Allows water to circulate without passing it through the sand bed, useful for chemical treatments such as algae control. The W’eau SPO-750 is one of the best choices for large swimming pools that need powerful, efficient, and durable filtration. With its robust polyester construction, efficient side mount design, and user-friendly features, this sand filter offers everything you need for crystal-clear pool water.

Read more less

The W’eau HDPE-450 side mount sand filter offers a powerful and efficient solution for keeping pool water clean. With its robust polyethylene construction, the sand filter is highly resistant to high pressure and intensive use. This makes it perfectly suited for both above-ground and built-in pools up to 32,000 liters. Thanks to its fine filtration of 25-30 microns, the W’eau HDPE-450 ensures that even the smallest dirt particles are removed, so you can always enjoy clear and clean water. Effective Filtration thanks to Side-Mount Design Unlike a top mount filter, the W’eau HDPE-450 has a side mount design, where the 6-way valve is mounted on the side of the filter tank. This ensures that water is distributed more efficiently over the sand bed, resulting in better filtration. Furthermore, a side mount filter is easier to maintain, partly due to the air relief valve and the transparent filter lid, which allow you to easily check the condition of the filter without having to open it. 6-Way Valve for Versatile Functions The 6-way valve of the W’eau HDPE-450 makes it easy to switch between different functions. This allows you to optimize the filtration process and perform maintenance on your pool water efficiently. The 6 positions are: Filter: Water flows from top to bottom through the sand bed to remove dirt and impurities. Backwash: Water flows in the opposite direction to flush the sand bed clean. Rinse: Flush dirty water away after backwashing, so the filter is ready for use. Close: Closes all inlets and outlets when the filter is not in use. Waste: Drain pool water directly to the sewer, for example to lower the water level. Circulate: Let water circulate without passing through the filter, ideal for chemical treatments such as algae control. Summary: The W’eau HDPE-450 side mount sand filter is an excellent choice for pools up to 32,000 liters. With its robust construction, fine filtration, and convenient 6-way valve, it ensures clear pool water and simple maintenance. Thanks to the side mount design, this filter is efficient in use and easy to maintain, making it an ideal choice for pool owners looking for a reliable and powerful filtration solution.

Read more less

The W'eau S-700 fiberglass-reinforced side mount sand filter is the top model in the W'eau S-series and is designed for pool owners who demand maximum filtration performance and a long service life. With a maximum flow rate of 20 m³ per hour, this powerful sand filter is suitable for large private pools up to 80,000 liters and forms the perfect foundation for a professional pool installation. Thanks to the fine filtration of 25 to 30 microns, dirt particles such as sand, dust, leaves, insects, and other contaminants are effectively removed from the pool water, ensuring you can always enjoy clear and hygienic swimming water. The filter tank is manufactured from high-quality polyethylene (PE) reinforced with fiberglass/polyester. This makes the filter exceptionally strong and resistant to high operating pressures, UV radiation, and varying weather conditions. The reinforced construction prevents deformation of the filter tank and guarantees reliable performance for years, even with intensive use. The side mount design offers significant advantages over a top mount sand filter. Because the 6-way valve is positioned on the side of the filter tank, the pool water is distributed evenly over the entire filter bed. This ensures optimal use of the filter medium, increases filtration efficiency, and reduces pressure loss. In addition, the top of the filter remains clear, making maintenance and changing the filter medium easier. The W'eau S-700 is equipped with a professional 6-way valve, allowing you to easily switch between all necessary filter functions: Filter – normal filtration of the pool water. Backwash – cleans the filter medium by sending the water through the filter tank in reverse. Rinse – flushes away remaining dirt after backwashing. Waste – drains pool water directly. Circulate – circulates water without passing through the filter bed. Close – shuts off all water flow. For extra ease of use, the filter features a transparent filter lid, an automatic air bleeder, a sight glass, and a pressure gauge. This allows you to easily check the filter pressure and see immediately when a backwash is needed. The filter is suitable for filter sand, filter glass, glass beads, and filter balls, allowing you to choose the filter medium that best suits your pool installation. Thanks to the standard 50 mm connections, the W'eau S-700 is easily combined with powerful pool pumps, heat pumps, UV-C units, and saltwater systems.

Read more less

The W’eau SPO-500 polyester side mount sand filter offers a high-quality solution for thoroughly cleaning pool water. With its durable construction and effective filtration, this sand filter is an excellent choice for swimming pools up to 40,000 liters. The SPO-500 filters the water with extreme precision, with a filtration rating of 25-30 microns, ensuring clear and clean swimming water. The robust construction of the filter tank is made of polyester and finished with a smooth gelcoat fiberglass, making it resistant to long-term use and weather conditions. This side mount sand filter is equipped with a 6-way valve, which, in addition to the standard filtering function, also supports backwashing, rinsing, circulating, and other convenient functions. A side mount filter like the SPO-500 ensures that the water is better distributed over the sand bed, resulting in more efficient filtration and easier maintenance. Additionally, the filter features a handy air release valve and a transparent lid, allowing you to easily look inside the filter without opening it. The W’eau SPO-500 is suitable for swimming pools with a maximum water capacity of 40,000 liters and can handle a flow rate of 10 m³ per hour. The standard connections are a 50 mm glue connection and a 38 mm threaded connection, which simplifies installation. The set comes complete with all necessary connections to carry out the installation quickly and easily. Functions of the 6-way valve: Filter: Water flows from top to bottom through the filter for standard water filtration. Backwash: Water flows in the opposite direction (from bottom to top) to rinse the sand clean and remove accumulated dirt. Rinse: Flushes out dirty water after backwashing, making the filter ready for use again. Close: Closes all inlets and outlets of the filter when not in use. Waste: Drains pool water directly to the sewer, for example to lower the water level. Circulate: Circulates the water without filtering it, useful for chemical treatments such as algae control. Scope of delivery: Polyester sand filter tank 6-way valve with all functions Connection material for 50 mm glue connection and 38 mm threaded connection Manual for easy installation The W’eau SPO-500 is the ideal choice for pool owners looking for a powerful, durable, and user-friendly sand filter. With its high-quality materials and efficient filtration, this set ensures clean and clear swimming pool water throughout the entire summer.

Read more less

The Zodiac MS 650 sand filter is designed for those who want to combine reliable pool filtration with a robust design and efficiency. With a fiberglass-reinforced polyester tank, this sand filter is highly resistant to pressure, temperature, UV radiation, and corrosive pool chemicals such as chlorine and salt. The Zodiac MS 650 comes complete, including a side-mount 6-way valve, transparent inspection lid, pressure gauge, air release valve, filler cap, and mounting kit. This filter is suitable for pools up to approx. 80 m³ (depending on pump capacity) and guarantees a maximum flow rate of 15.8 m³/h. 📐 Dimensions (in millimeters) Tank diameter: 645 mmTotal height with valve: 815 mmConnection size: 1.5" (threaded)Weight: 21 kg Due to its compact size and durable construction, this sand filter is highly popular among pool owners who want powerful filtration without compromising on space or maintenance ease.

Read more less

The W’eau HDPE-500 Top Mount sand filter 12 m³/h is a powerful sand filter for medium to larger private swimming pools. With a maximum flow rate of an impressive 12 m³ per hour and a spacious 500 mm filter tank, this model offers significantly more filtering capacity than the smaller models in the W’eau HDPE series. The filter tank is manufactured from durable HDPE (High Density Polyethylene). This durable plastic is perfectly suited for use around swimming pools: it is moisture-resistant, corrosion-proof, and provides a sturdy base for years of use. Additionally, the top-mounted 6-way valve ensures a compact installation and makes operating and maintaining the sand filter easy. This makes the HDPE-500 an excellent choice if you are looking for a powerful, reliable, and user-friendly sand filter for a larger above-ground pool, steel-wall pool, wooden pool, or in-ground pool. Powerful filtration up to 12,000 liters per hour With a maximum flow rate of 12 m³/h, the W’eau HDPE-500 can process up to approximately 12,000 liters of pool water per hour. During filtration, the pool pump draws water from the pool and feeds it to the sand filter. Inside the filter tank, the water is passed through the filter medium. Small dirt particles get trapped within the filter sand or filter glass, after which the filtered water flows back to the pool through the return line. By repeating this process for several hours a day, the entire pool volume is regularly circulated through the filter. In combination with the correct pH level and disinfection, this contributes to clean, clear, and pleasant pool water. Large 500 mm filter tank The heart of this sand filter is the spacious 500 mm filter tank. A larger filter tank provides more room for filter medium, resulting in a greater effective filtering surface. This allows the filter to capture more dirt, making the HDPE-500 ideally suited for installations where a significant amount of pool water is circulated daily. Compared to, for example, a 350, 400, or 450 mm sand filter, the 500 mm tank offers extra capacity. This makes the HDPE-500 especially attractive for larger pools or situations where you deliberately want a bit of extra filtering capacity. Compact Top Mount design Despite the larger filter tank, the W’eau HDPE-500 remains relatively compact thanks to its Top Mount design. The 6-way valve is located directly on top of the filter tank. This requires less clearance next to the sand filter compared to a Side Mount version, where the valve is positioned on the side. This makes the HDPE-500 suitable for installation in, for example, a technical room, pump box, pool house, or garden shed. Do make sure to leave enough room above the sand filter so that the 6-way valve can be operated easily and the filter remains accessible for maintenance. 6-way valve for full control With the multi-functional 6-way valve, you can easily control what happens with the pool water. The various positions allow for both daily filtration and maintenance. FilterThe normal operating position. The water is passed through the filter medium and then sent back to the pool. BackwashThe water flow is reversed. This loosens accumulated dirt from the filter bed and discharges it through the waste line. RinseUse this after backwashing. The filter medium is re-settled, and remaining dirt is sent to the drain. WasteThe water goes directly to the drain without passing through the filter medium. This position can be used, for example, to lower the pool water level. CirculateThe pool water circulates through the system without passing through the filter medium. ClosedShuts off the water flow through the 6-way valve. Important: always switch the pool pump off completely before turning the 6-way valve to a different position. Easy cleaning with Backwash One of the main advantages of a sand filter is its simple maintenance. During the swimming season, more and more dirt collects in the filter medium. This increases resistance and can eventually reduce water flow. With the Backwash function, you can clean the filter bed without having to open the filter tank. The water flow is reversed, loosening dirt between the filter material and flushing it out through the drain. After backwashing, briefly set the system to Rinse. Then, the valve can be set back to Filter. This allows the same filter medium to be used for a long time. Suitable for filter sand The traditional choice for the HDPE-500 is filter sand. Filter sand has a specially selected grain size that traps small impurities between the sand grains while allowing pool water to continue flowing through. Only use filter sand specifically intended for pool filters. Regular construction or play sand is not suitable for this. A correctly filled filter tank ensures a stable filter bed and proper distribution of the pool water. Also suitable for filter glass Would you rather not use traditional filter sand? Then the W’eau HDPE-500 can also be filled with suitable filter glass. Filter glass is a popular alternative to sand. The material generally has a long lifespan, and, depending on the product used, you need fewer kilograms of it than traditional filter sand. Additionally, quality filter glass can provide very fine filtration. Always use the quantity and grain size prescribed by the manufacturer of the filter medium. Strong HDPE filter tank HDPE stands for High Density Polyethylene. This material combines a sturdy construction with a relatively low weight. Moreover, the material cannot rust, which is a major advantage in a technical room where moisture is frequently present. As a result, the filter tank is perfectly suited for swimming pool applications and, with proper use, can last for many swimming seasons. Ideal for medium and larger pools With its capacity of 12 m³/h, the HDPE-500 is especially attractive for medium to larger private swimming pools. The filter can be used for, among others: Large frame pools Steel-wall pools Wooden pools Polyester pools Masonry pools Other fixed in-ground and above-ground pools When sizing a filter system, you should not only look at the pool volume. The pump capacity, pipe diameter, pipe length, height differences, and any accessories also play a role. Combine with a suitable pool pump The W’eau HDPE-500 is a sand filter and not a complete sand filter set. The pool pump must therefore be selected separately. It is important that the actual flow rate of the pump matches the filter vessel. A pump that is far too powerful can push water through the filter bed too quickly and exceed the maximum allowed flow rate of the filter. Conversely, a pump that is too small may not provide sufficient circulation. Therefore, always match the pump and sand filter to each other. Excellent to combine with a heat pump The HDPE-500 can be excellently used in a pool installation with a heat pump. A commonly used installation order is: Pool → pool pump → W’eau HDPE-500 sand filter → bypass → heat pump → pool The water is thus filtered first before flowing through the heat exchanger of the heat pump. This helps prevent dirt from the pool from entering the heat pump directly. A bypass can subsequently be used to regulate how much of the filtered pool water is directed through the heat pump. Good choice for longer pipes In a pool installation, a portion of the theoretical pump capacity is always lost due to resistance. Bends, valves, pipe length, height differences, a heat pump, and other components can all affect the final water flow. The higher capacity of the HDPE-500 makes this model attractive for more extensive pool installations. Of course, the connected pool pump must also have sufficient capacity here to overcome the system resistance. Powerful sand filter for larger pool installations The W’eau HDPE-500 Top Mount sand filter 12 m³/h is the ideal choice when looking for more capacity than the smaller models in the HDPE series offer. With its spacious 500 mm filter vessel and a maximum flow rate of no less than 12,000 litres per hour, it forms a powerful foundation for the filtration of medium-sized and larger pools. The practical 6-way valve makes daily use and maintenance simple, while the strong HDPE filter vessel is resistant to the damp conditions around a pool. Moreover, you can choose between filter sand and filter glass yourself. Combine the HDPE-500 with a well-matched pool pump and optionally a bypass and heat pump, and you have a powerful and complete foundation for clear, clean, and well-circulated pool water throughout the entire swimming season.

Read more less

The GRE FS500 sand filter set is a powerful and complete filtration solution for medium to large above-ground swimming pools. With a filter capacity of 8,000 liters per hour and suitable for pools up to 65 m³, this sand filter system ensures excellent water circulation and long-lasting clear pool water. The complete monoblock system is supplied with a powerful filter pump, filter vessel, 5-way selector valve, pressure gauge and all necessary piping components, mounted on a sturdy plastic base. This makes installation quick and easy. Thanks to the 5-way selector valve, you can easily switch between different functions, such as filtering, backwashing, rinsing, emptying, and closing. The integrated pressure gauge continuously displays the filter pressure, so you can easily determine when maintenance or a backwash is required. The filter vessel with a diameter of 500 mm accommodates approximately 85 kg of filter sand and is also suitable for filter glass or Aqualoon as a filter medium. Due to the large filter capacity, dirt is captured more efficiently and you need to backwash less frequently. The GRE FS500 complies with European safety standards and is designed for years of reliable use.

Read more less

The W'eau V-450 fiberglass-reinforced top mount sand filter is a high-quality sand filter that combines excellent filtration performance with a compact design and a long service life. With a maximum flow rate of 8 m³ per hour, this filter is ideal for above-ground and in-ground swimming pools up to 32,000 liters. Thanks to the filtration fineness of 25 to 30 microns, the V-450 effectively removes dirt particles such as sand, dust, leaves, insects, and other suspended contaminants, keeping your pool water clear and hygienic. The filter tank is manufactured from fiberglass-reinforced polyester with a polyethylene inner layer, making it resistant to high operating pressure, UV radiation, and intensive use. This robust construction ensures a significantly longer service life than standard plastic filter tanks and makes the filter suitable for years of trouble-free use. The Top Mount design means that the 6-way valve is placed on top of the filter tank. This keeps the installation compact, making the filter ideal for technical rooms where there is limited installation space available. The internal water diffuser ensures that the pool water flows evenly through the filter bed, allowing for optimal utilization of the filter medium. The professional 6-way valve offers all the functions required for efficient maintenance of your swimming pool: Filter – normal filtration of the pool water. Backwash – cleans the filter material by reversing the water flow. Rinse – flushes away remaining dirt after backwashing. Waste – drains pool water directly. Circulate – allows water to circulate without filtering. Close – shuts off all water flows. The W'eau V-450 is suitable for filter sand, filter glass, glass pearls, and filter balls, allowing you to choose the filter medium that best suits your pool installation and maintenance preference. For extra convenience, the filter features a built-in pressure gauge, a large drain plug, and a sturdy clamp ring for easy assembly and maintenance.

Read more less

The W'eau V-400 fiberglass-reinforced top mount sand filter is a compact, powerful, and durable sand filter that is ideal for medium-sized above-ground and in-ground swimming pools. With a maximum flow rate of 6 m³ per hour, this filter is suitable for pools up to 24,000 liters and ensures efficient filtration of pool water. Thanks to a filtration fineness of 25 to 30 microns, dirt particles such as sand, leaves, insects, dust, and other contaminants are effectively removed from the water. The filter vessel is manufactured from high-quality fiberglass-reinforced polyester with a polyethylene inner layer, making it exceptionally resistant to high pressure, UV radiation, and varying weather conditions. This robust construction makes the W'eau V-400 more durable than standard plastic sand filters and ensures years of reliable performance. Thanks to the Top Mount 6-way valve, the installation remains compact. The valve is positioned on top of the filter vessel, allowing the filter to take up less space than a side mount version. This makes the V-400 ideal for technical rooms where available space is limited. The pool water flows evenly through the filter bed via an internal diffuser, ensuring optimal use of the filter medium. The filter is suitable for filter sand, filter glass, glass beads, and filter balls, so you can choose the filter medium that best suits your pool and maintenance preference. The professional 6-way valve features all necessary functions: Filter – normal filtration of the pool water. Backwash – cleans the filter material. Rinse – flushes away dirt residues after backwashing. Waste – drains water directly. Circulate – circulates water without filtration. Close – shuts off all water flows. For extra convenience, the W'eau V-400 features a built-in pressure gauge, a large drain plug, and a sturdy clamp ring that allows the 6-way valve to be easily mounted or removed for maintenance.

Read more less

The W'eau V-350 fiberglass-reinforced top mount sand filter is a compact, durable, and efficient sand filter specifically designed for smaller above-ground and in-ground swimming pools. With a maximum flow rate of 4 m³ per hour, this filter is suitable for pools up to approximately 16,000 liters and ensures excellent water quality thanks to a filtration fineness of 25 to 30 microns. Unlike standard plastic sand filters, the W'eau V-350 features a fiberglass-reinforced filter tank. This construction offers higher pressure resistance, extra sturdiness, and a longer lifespan. The filter tank is highly resistant to UV radiation, corrosion, high temperatures, and intensive use, ensuring reliable performance for years. Thanks to the Top Mount 6-way valve, the installation remains compact. The valve is positioned on top of the filter tank, allowing the filter to take up less space than a side-mount version. This makes the V-350 ideal for technical areas where available space is limited. Water is evenly distributed over the filter bed by the internal diffuser, efficiently removing debris such as sand, leaves, insects, dust, and other contaminants. The filter is suitable for use with filter sand, filter glass, or glass beads, allowing you to choose the filter medium that best suits your pool installation. For easy maintenance, the W'eau V-350 is equipped with a pressure gauge, a large drain plug, a sturdy clamping ring for the 6-way valve, and high-quality internal components. This makes both replacing the filter material and performing a backwash quick and easy. Why choose the W'eau V-350? The W'eau V-350 fiberglass-reinforced top mount sand filter is the perfect choice for pool owners looking for a compact, durable, and reliable filtration system. Thanks to the fiberglass-reinforced filter tank, the professional 6-way valve, and efficient filtration, you will enjoy clear and clean pool water with minimal maintenance. Due to its high-quality materials and excellent resistance to weather conditions, the W'eau V-350 is an investment you will enjoy for years to come.

Read more less

The GRE FS320 sand filter set is a compact and complete filtration solution for above-ground swimming pools. With a filtering capacity of 4,000 liters per hour, this sand filter system ensures clear and clean pool water. Thanks to its compact design, the unit is easy to install and maintain, making it ideal for small to medium-sized above-ground pools. The complete set comes with a filter tank, filter pump, 5-way selector valve, pressure gauge, and a sturdy plastic base on which all components are pre-assembled. This makes the installation process quick and easy. The 5-way selector valve allows you to easily switch between different functions such as filtering, backwashing, rinsing, emptying, and closed. The integrated pressure gauge displays the filter pressure, so you always know when maintenance or a backwash is needed. The GRE FS320 is suitable for various filter media, including filter sand, filter glass, and Aqualoon, allowing you to choose the filter medium that best suits your needs. This sand filter set complies with European safety standards and guarantees reliable and durable operation.

Read more less

The W’eau HDPE-450 Top Mount sand filter 8 m³/h is a powerful and durable sand filter for efficiently filtering swimming pool water. With a 450 mm filter tank and a maximum flow rate of 8 m³ per hour, this sand filter offers sufficient capacity for medium-sized private swimming pools. The larger filter surface area ensures that pool water is effectively guided through the filter medium, removing dirt particles from the water. The filter tank is manufactured from strong HDPE (High Density Polyethylene). This material is excellently suited for pool installations: it is sturdy, moisture-resistant, and cannot rust. In combination with the top-mounted 6-way valve, you get a compact and user-friendly filter solution that can be easily integrated into an existing or new pool installation. Powerful filtration of 8 m³ per hour With a maximum flow rate of 8 m³/h, the W’eau HDPE-450 can theoretically process approximately 8,000 liters of pool water per hour. During the filtration process, the pool pump draws water from the swimming pool. The water is then pumped to the filter tank and guided through the filter medium. Dirt particles are trapped within the filter material, after which the filtered water flows back to the pool via the return line. As a result, small impurities are continuously removed from the pool water. In combination with a proper water balance and correct disinfection, this contributes to clear and clean pool water. 450 mm filter tank for a larger filter surface area The HDPE-450 features a filter tank with a diameter of 450 mm. Consequently, this version offers a larger filter surface area than, for example, the HDPE-350 and HDPE-400. A larger filter tank means that more filter medium can be used. This allows more dirt to be trapped before the filter medium needs to be cleaned. The HDPE-450 is therefore an attractive mid-size option for pool owners who want more filtration capacity without immediately choosing a very large sand filter. Compact Top Mount design The W’eau HDPE-450 is designed as a Top Mount sand filter. This means that the 6-way valve is placed directly on top of the filter tank. An important advantage of this design is that the complete sand filter requires relatively little floor space. In a Side Mount version, the valve is located next to the filter tank, making the installation wider. This makes the HDPE-450 easy to place in, for example, a technical room, shed, equipment box, or next to the pool. When placing it, ensure there is sufficient free space above the sand filter for operating and maintaining the 6-way valve. Multifunctional 6-way valve With the integrated 6-way valve, you can easily control the various functions of the sand filter. This means you do not need to disconnect pipes for normal maintenance. The different settings are: Filter – the normal operating position where pool water flows through the filter medium. Backwash – reverses the water flow through the filter bed so that accumulated dirt is flushed out via the drain. Rinse – used after backwashing to properly re-settle the filter medium and discharge any remaining dirt. Waste – discharges pool water directly to the drain without passing it through the filter medium. Circulate – circulates the water through the system without filtration. Closed – closes off the water flow through the valve. Note: always switch off the pool pump completely before changing the setting of the 6-way valve. Simple cleaning by backwashing An important advantage of a sand filter is its simple maintenance. As the pool is used, more and more dirt collects in the filter medium. This increases resistance and can eventually reduce the flow rate. Instead of opening the filter tank and cleaning the filter material manually, you simply use the Backwash function. This temporarily reverses the water flow. The accumulated dirt is loosened from the filter bed and discharged via the waste water connection. Afterward, you run the sand filter on Rinse for a short time and then return the 6-way valve to Filter. Suitable for filter sand and filter glass The W’eau HDPE-450 can be filled with various suitable filter media. The most commonly used options are filter sand and filter glass. Filter sand is the traditional solution and is known for its simple operation and attractive price. Filter glass is a popular alternative to sand. Depending on the filter glass used, it can offer fine filtration and generally has a long service life. Always use the prescribed quantity and grain size for the HDPE-450. Too little, too much, or the wrong grain size can affect the filtration and flow rate. Strong HDPE filter tank The filter tank is manufactured from HDPE, or high-density polyethylene. This plastic combines a relatively low weight with a sturdy construction. An important advantage is that HDPE cannot rust. This makes the material highly suitable for pool installations, where components are exposed to moisture and pool water for long periods. The sturdy construction ensures the sand filter is suitable for years of seasonal use, provided the installation is correctly placed, maintained, and properly protected during the winter period. Ideal for medium-sized pools Thanks to its capacity of 8 m³/h, the HDPE-450 is primarily attractive for medium-sized private swimming pools. Think, for example, of larger frame pools, steel-wall pools, wooden pools, and smaller to medium-sized permanent pools. When choosing a sand filter, you should not only look at the maximum pool volume. Pipe length, pipe diameter, height differences, bends, heat pumps, and other accessories also cause resistance and can reduce the actual water flow rate. Therefore, it is important to match the sand filter and pool pump as a single unit. Combinable with a swimming pool heat pump Do you want to use a pool heat pump in addition to filtration? Then the HDPE-450 can become part of a complete pool installation. The normal sequence is, for example: Swimming pool → pool pump → sand filter → bypass/heat pump → return to pool. The sand filter is positioned before the heat pump so that the water is filtered first before flowing through the heat pump’s heat exchanger. With a bypass, you can then set how much water is routed through the heat pump. Powerful and reliable filtration for your pool The W’eau HDPE-450 Top Mount sand filter 8 m³/h is an excellent choice when you are looking for a sturdy sand filter with sufficient capacity for a medium-sized pool. The 450 mm HDPE filter tank offers a spacious filter surface area, while the maximum flow rate of 8,000 liters per hour ensures powerful water circulation. The combination of the durable HDPE filter tank, the compact Top Mount construction, and the multifunctional 6-way valve also makes the HDPE-450 easy to use and maintain. Thanks to the ability to use filter sand or filter glass, you can configure the installation according to your own preference. A powerful, compact, and low-maintenance sand filter for those who want to enjoy clean and clear pool water throughout the entire swimming season.

Read more less

The W’eau HDPE-400 Top Mount sand filter 6.5 m³/h is a powerful and low-maintenance sand filter for keeping small to medium-sized swimming pools clear and clean. With a filter diameter of 400 mm and a maximum flow rate of 6.5 m³ per hour, this model offers more capacity than the HDPE-350 and is ideal when you need just a bit more filtering power. The filter tank is manufactured from strong HDPE (High Density Polyethylene). This material is excellently suited for pool installations as it does not rust and is highly resistant to moisture and normal weather conditions. In combination with the compact Top Mount 6-way valve, the HDPE-400 forms a practical basis for reliable swimming pool filtration. Powerful filtration at 6.5 m³ per hour During the filtration process, pool water is fed to the filter tank by the pool pump. In the tank, the water flows through the filter medium present, such as filter sand or filter glass. Small dirt particles are trapped within the filter material, after which the filtered water is returned to the pool. With a maximum flow rate of 6.5 m³/h, or approximately 6,500 liters per hour, the HDPE-400 is a great intermediate size for pools where a smaller 350 mm sand filter does not provide sufficient capacity. For optimal operation, it is important to choose a pool pump whose actual flow rate matches the capacity of the sand filter. 400 mm filter tank for a larger filter surface area The HDPE-400 has a filter tank with a diameter of 400 mm. The larger filter surface area ensures that more filter medium is available to capture dirt from the pool water. This offers various advantages. More dirt can be retained before a backwash becomes necessary, and the water can be effectively distributed through the filter bed. The HDPE-400 is therefore an interesting choice when you want a compact installation but at the same time are looking for sufficient filtering capacity for daily use. Compact Top Mount design With this sand filter, the 6-way valve is located on top of the filter tank. This is what we call a Top Mount version. The great advantage is that the sand filter takes up relatively little floor space. With a Side Mount version, the valve is next to the tank, which means more space is needed beside the sand filter. This makes the W’eau HDPE-400 particularly suitable for placement in, for example, a technical room, technical box, garden shed, or compact pool installation. Multifunctional 6-way valve The integrated 6-way valve makes operating and maintaining the sand filter simple. With one lever, you select the desired function of the filter system. The most important settings are Filter, Backwash, Rinse, Waste, Circulate and Closed. During normal use, the valve is set to Filter. To clean the filter medium, you use Backwash, after which you briefly rinse with Rinse. With Waste, you can send water directly to the drain, and Circulate lets the water circulate without passing it through the filter bed. Important: always switch the pool pump off completely before changing the setting of the 6-way valve. Easy cleaning with Backwash Over time, more and more dirt collects in the filter medium. This increases the resistance in the filter tank, which can reduce flow. With the Backwash function, you do not need to open the filter tank every time. The water flow is temporarily reversed, causing accumulated dirt to be loosened from the filter bed and discharged via the drain. Afterwards, you use the Rinse function briefly to reposition the filter medium properly. Then, set the valve back to Filter and normal filtration can be resumed. Suitable for filter sand and filter glass The W’eau HDPE-400 can be filled with traditional filter sand or with suitable filter glass. Filter sand is the traditional and economical choice for a sand filter. Filter glass is a popular alternative and, depending on the product chosen, can offer finer filtration and a longer service life. Always use the correct grain size and amount of filter medium prescribed for the filter tank. An incorrect amount or grain size can negatively affect the performance of the sand filter. Strong HDPE filter tank The filter tank is manufactured from HDPE, or high-density polyethylene. This strong plastic is particularly suitable for use around swimming pools. Unlike metal filter tanks, HDPE cannot rust. This is an important advantage in an environment where the material is constantly exposed to moisture and pool water. The robust construction makes the HDPE-400 suitable for long-term use throughout the swimming season. Suitable for above-ground and in-ground pools Thanks to the combination of a 400 mm filter tank and a capacity of 6.5 m³/h, the W’eau HDPE-400 can be used for various types of private swimming pools. It is, for example, suitable for larger frame pools, steel wall pools, wooden pools, and smaller permanent pools, provided the capacity of the complete installation is correctly matched to the pool volume. Reliable filtration with extra capacity The W’eau HDPE-400 Top Mount sand filter 6.5 m³/h is an excellent choice for those looking for a compact sand filter but who need more capacity than a standard 350 mm model can provide. The 400 mm HDPE filter tank, the maximum flow rate of 6.5 m³/h, and the practical 6-way valve make daily filtering and maintenance of the pool simple. Thanks to the ability to use both filter sand and filter glass and the space-saving Top Mount design, the HDPE-400 is easy to integrate into various pool installations. A solid and user-friendly sand filter for clear pool water throughout the entire swimming season.

Read more less

The Poolex HDPE-450 Opti Side Mount sand filter 7.8 m³/h is a durable and powerful sand filter for the efficient filtration of medium-sized swimming pools. With a maximum flow rate of 7.8 m³/h and a filter tank with a diameter of 450 mm, this filter offers an excellent combination of capacity, reliability, and ease of use. The filter tank is manufactured from strong and recyclable HDPE (High Density Polyethylene). This material is excellently suited for long-term use in pool installations. The side-mounted 6-way valve (Side Mount) makes operation and maintenance simple while keeping the top of the filter tank clear. According to Poolex, the HDPE-450 has a maximum capacity of 7.8 m³/h, a filter surface area of 0.16 m², and is designed for pools up to approximately 45 m³, assuming a filtration cycle of about 6 hours. Side Mount 6-way valve In this version, the 6-way valve is located on the side of the filter tank. This offers a practical setup for technical rooms and makes the top of the tank more accessible. The main functions of the pool filtration can be set via the 6-way valve: Filter – normal filtration of the pool water Backwash – backwashing and cleaning the filter medium Rinse – rinsing after a backwash Waste – discharging water directly to the drain Recirculate – circulating water without filtration Closed – shutting off the water flow In addition, the filter features a pressure gauge, which allows for easy monitoring of the pressure in the filter system. Strong HDPE filter tank The filter tank is made of recyclable high-density polyethylene (HDPE). The OPTI series has been developed with an emphasis on reliability, durability, and easy maintenance. The tank has a diameter of 450 mm and a height of approximately 730 mm. Due to its compact dimensions, the filter can also be used in technical rooms where available space is limited. For the HDPE-450, Poolex specifies a pool volume of up to approximately 45 m³ at a theoretical filtration time of about six hours. For the best performance, it is important to match the capacity of the pool pump with the sand filter. Also, take into account pipe length, height differences, and other components that cause resistance. Suitable for both filter sand and filter glass The Poolex HDPE-450 can be filled with traditional filter sand or with suitable filter glass. For this model, Poolex specifies the following quantities: Filter sand: approximately 45 kgFilter glass: approximately 35 kg Filter medium is not included as standard. 50 mm connections The HDPE-450 is equipped with 1½″ / 50 mm connections. This makes the filter particularly suitable for pool installations with 50 mm PVC pipes, and it can be combined with various compatible pool pumps. Why choose the Poolex HDPE-450 Opti Side Mount? The Poolex HDPE-450 Opti Side Mount sand filter 7.8 m³/h is an excellent choice for those looking for a solid filter tank for a permanent or high-quality pool installation. The combination of a Ø450 mm HDPE tank, 7.8 m³/h capacity, 50 mm connections, 6-way valve, and pressure gauge makes this model both practical and durable. With space for 45 kg of filter sand or approximately 35 kg of filter glass and a pool capacity of up to approximately 45,000 liters, this Poolex sand filter provides a reliable basis for clear and clean pool water.

Read more less

The GRE FA6100 sand filter set is a powerful and professional filtration solution for large above-ground swimming pools of up to 75 m³. Thanks to a filtration capacity of 10,000 liters per hour, this sand filter system efficiently removes dirt and impurities, allowing you to enjoy clean and crystal-clear pool water. The complete monoblock system consists of a powerful filter pump, large filter tank, integrated pre-filter, 6-way selector valve, pressure gauge, and all essential components for reliable filtration. The integrated pre-filter captures leaves, hair, and other coarse debris before it reaches the pump. This protects the pump and extends the lifespan of the system. Thanks to the 6-way selector valve, you can easily switch between the various functions: filtration, backwash, rinse, recirculate, drain, and closed. This makes maintenance simple and ensures the filter continues to perform optimally. The large filter tank with a diameter of 600 mm holds approximately 130 kg of filter sand and is also suitable for filter glass or Aqualoon as a filter medium. The large filter capacity ensures excellent dirt absorption and longer filter cycles. The GRE FA6100 complies with European safety standards and is designed for years of reliable use.

Read more less

The W’eau SPE-HDPE side-mount sand filter is a powerful and reliable solution to keep your pool water crystal clear at all times. Whether for an above-ground or in-ground pool, this filter thoroughly cleans your pool water so you can always take a refreshing dip. Thanks to the robust polyethylene material, the W’eau HDPE-650 is resistant to high pressure and heavy loads, making it perfect for intensive use and long-lasting performance. This sand filter is suitable for pools up to 64,000 liters and provides fine filtration down to 25-30 microns, removing even the smallest dirt particles. Effective Filtration thanks to Side-Mount Design The W’eau HDPE-650 features a side-mount filter. Unlike top-mount filters, the 6-way valve is positioned on the side of the filter tank. This ensures a more efficient distribution of water over the sand bed, resulting in more effective filtration. Furthermore, the side-mount design makes maintenance easier. With the air relief valve and the transparent filter lid, you can easily check the status of the filter without opening it. Versatile 6-Way Valve The 6-way valve of the W’eau HDPE-650 offers versatile options for various filtration functions. This allows you to easily switch between different settings, depending on what your pool needs: Filter: Water flows from top to bottom through the sand bed, removing dirt and impurities. Backwash: The sand bed is rinsed clean by flowing water in the reverse direction. Rinse: Flush out dirty water after backwashing so the filter is ready for use. Close: Closes all inlets and outlets when the filter is not in use. Waste: Drains pool water directly to the sewer, useful for lowering the water level. Recirculate: Circulates water without passing through the filter, ideal for treating water with chemicals such as algaecides. Summary: The W’eau HDPE-650 side-mount sand filter is the ideal choice for large pools up to 64,000 liters. With its sturdy construction, efficient side-mount design, and versatile 6-way valve, this filter ensures a thorough cleaning of your pool water. Thanks to the easy maintenance options and fine filtration capacity of 25-30 microns, your pool will always stay clean and clear, ready for a refreshing dip.

Read more less

The W’eau HDPE-650 side mount sand filter is a powerful and reliable solution for keeping your pool water crystal clear at all times. Whether for an above-ground or in-ground pool, this filter allows your pool water to be thoroughly cleaned so you can always take a refreshing dip. Thanks to its robust polyethylene material, the W’eau HDPE-650 is resistant to high pressure and heavy loads, making it perfect for intensive use and long-term performance. This sand filter is suitable for pools up to 64,000 liters and provides fine filtration down to 25-30 microns, removing even the smallest dirt particles. Effective Filtration Thanks to Side-Mount Design The W’eau HDPE-650 is equipped with a side-mount filter. Unlike top-mount filters, the 6-way valve is positioned on the side of the filter tank. This ensures more efficient distribution of the water over the sand bed, resulting in more effective filtration. Moreover, the side-mount design makes maintenance easier. With the air vent and the transparent filter cover, you can easily check the status of the filter without opening it. Versatile 6-Way Valve The 6-way valve of the W’eau HDPE-650 offers versatile options for various filtration functions. This allows you to easily switch between different settings, depending on what your pool needs: Filter: Water flows from top to bottom through the sand bed, removing dirt and impurities. Backwash: The sand bed is rinsed clean by having the water flow in the opposite direction. Rinse: Flush out dirty water after backwashing so the filter is ready for use. Close: Closes all inlets and outlets when the filter is not in use. Waste: Drains pool water directly to the sewer, useful for lowering the water level. Circulate: Circulates the water without passing through the filter, ideal for treating water with chemicals such as algaecide. Summary: The W’eau HDPE-650 side-mount sand filter is the ideal choice for large pools up to 64,000 liters. With its sturdy construction, efficient side-mount design, and versatile 6-way valve, this filter ensures a thorough cleaning of your pool water. Thanks to the easy maintenance options and fine filtration capacity of 25-30 microns, your pool will always remain clean and clear, ready for a refreshing dip.

Read more less

The W'eau V-700 fiberglass-reinforced top mount sand filter is the largest and most powerful model in the W'eau V-series. This professional sand filter is designed for large private swimming pools and offers an excellent combination of high filtration capacity, durability, and ease of use. With a maximum flow rate of 20 m³ per hour, the V-700 is suitable for swimming pools up to 80,000 liters and forms the ideal basis for a high-quality pool installation. Thanks to the filtration fineness of 25 to 30 microns, dirt particles such as sand, dust, leaves, insects, and other suspended impurities are efficiently removed from the pool water. The filter tank is manufactured from high-quality polyethylene (PE) reinforced with fiberglass/polyester. This makes the filter tank significantly stronger than standard plastic filter tanks and excellently resistant to high operating pressure, UV radiation, corrosion, and long-term intensive use. This robust construction guarantees years of reliable performance and a long lifespan. Thanks to the top mount design, the 6-way valve is positioned on top of the filter tank. This keeps the installation compact and makes the filter ideal for technical rooms where space is limited. The internal diffuser distributes the pool water evenly across the entire filter bed, ensuring that the filter medium is utilized optimally and efficient filtration is achieved. The professional 6-way valve features all necessary filter functions: Filter – normal filtration of the pool water. Backwash – cleans the filter medium by reversing the water flow. Rinse – flushes away dirt residues after backwashing. Waste – drains pool water directly. Recirculate – circulates the water without filtration. Closed – shuts off all water flows. The W'eau V-700 is suitable for filter sand, filter glass, glass beads, and filter balls, allowing you to choose the filter medium that best suits your pool and maintenance preference. For extra ease of use, the filter is equipped with a built-in pressure gauge, a large drain plug, and a sturdy clamp ring that allows the 6-way valve to be easily removed for maintenance or replacing the filter medium.

Read more less

The W'eau V-500 fiberglass-reinforced top mount sand filter is a powerful and durable filtration system for medium to large above-ground and built-in swimming pools. With a maximum filtration capacity of 12 m³ per hour, this sand filter is suitable for pools up to 48,000 liters. Thanks to its fine filtration of 25 to 30 microns, the filter effortlessly removes sand, dust, leaves, insects, and other suspended particles, ensuring you can enjoy clear and hygienic pool water throughout the season. The filter vessel is manufactured from high-quality polyethylene (PE) reinforced with fiberglass/polyester. This makes the filter vessel significantly stronger than standard plastic filter tanks and highly resistant to high operating pressures, UV radiation, and various weather conditions. This ensures a long lifespan and reliable performance, even with intensive use. Thanks to the top mount design, the 6-way valve is mounted on top of the filter vessel. This keeps the installation compact and makes it ideal for technical rooms where space is limited. The internal diffuser distributes water evenly across the entire filter bed, ensuring optimal utilization of the filter medium and efficient water filtration. The professional 6-way valve features all the functions necessary for optimal pool maintenance: Filter – normal filtration of the swimming pool water. Backwash – cleans the filter material by reversing the water flow. Rinse – flushes away dirt residues after backwashing. Waste – drains swimming pool water directly. Recirculate – allows water to circulate without filtering. Close – shuts off all water flows. The W'eau V-500 is suitable for various filter media, including filter sand, filter glass, glass beads, and filter balls. This allows you to choose the filter medium that best suits your pool and maintenance preferences. For extra ease of use, the filter is equipped with a built-in pressure gauge, a large drain plug, and a sturdy clamp ring, allowing the 6-way valve to be easily removed for maintenance or for replacing the filter medium.

Read more less

The W'eau S-450 fiberglass-reinforced side mount sand filter is a high-quality pool filter specifically developed for pool owners seeking maximum reliability, efficient filtration, and a long service life. Thanks to the combination of a fiberglass-reinforced filter tank, a side mount 6-way valve, and a filter capacity of 8 m³ per hour, this sand filter is perfectly suited for both above-ground and in-ground pools up to 32,000 liters. The filter tank is manufactured from high-quality polyethylene reinforced with fiberglass/polyester, making it excellently resistant to high operating pressure, UV radiation, and changing weather conditions. As a result, the filter retains its strength and shape for years, even with intensive use. Compared to standard plastic filter tanks, the fiberglass-reinforced construction offers extra stability and a longer service life. The side mount version stands out because the 6-way valve is positioned on the side of the filter tank. This ensures that the pool water is evenly distributed over the entire filter bed, resulting in more efficient filtration and better utilization of the filter media. In addition, the top of the filter remains clear, making maintenance easier and the filter medium easy to replace. With a filtration fineness of 25 to 30 microns, the W'eau S-450 effortlessly removes sand, dust, insects, leaves, and other suspended dirt particles from the pool water. In combination with high-quality filter glass, the filtration performance can be improved even further, keeping the water clear for longer and reducing the use of pool chemicals. The sand filter features a professional 6-way valve with all necessary functions for optimal pool maintenance: Filter – normal filtration of the pool water. Backwash – cleans the filter bed by sending the water in the reverse direction through the filter. Rinse – flushes away remaining dirt after backwashing. Waste – drains pool water directly without filtering. Recirculate – lets the water flow around without going through the filter. Close – shuts off all water flows. For extra ease of use, the W'eau S-450 is equipped with a transparent filter lid, an automatic air bleeder, and a built-in pressure gauge, allowing you to check at a glance when the filter needs cleaning. The filter is suitable for both filter sand and filter glass. While filter sand is an affordable choice, filter glass offers finer filtration, less water consumption during backwashing, and a significantly longer service life. Thanks to the standard 50 mm connections, the W'eau S-450 is easy to combine with virtually all pool pumps, heat pumps, UV-C systems, and salt water systems. Why choose the W'eau S-450? The W'eau S-450 fiberglass-reinforced side mount sand filter is an excellent choice for pool owners seeking a durable, low-maintenance, and powerful filter system. Thanks to the robust fiberglass-reinforced construction, the efficient side mount technology, and the professional 6-way valve, this sand filter provides reliable performance for years. In combination with high-quality filter glass and a suitable pool pump, the W'eau S-450 ensures crystal-clear pool water with minimal maintenance, allowing you to enjoy a clean and healthy pool without any worries.

Read more less

The Flowdians Caraibes II 30 m³/h sand filter is the most powerful model in this series and is suitable for large swimming pools and demanding applications. This filter combines a large filter surface area with a high flow rate, resulting in maximum filtration performance and crystal-clear water. The robust tank is manufactured from polyester laminate with fiberglass reinforcement, making it resistant to heavy loads and long-term use. The design is focused on efficiency and ease of use, with a wide filling opening, low drain, and a transparent lid for quick inspection. This model is the perfect choice for those looking for a professional filtration solution with maximum performance and reliability.

Read more less

The Flowdians Caraibes II 18 m³/h sand filter has been developed for swimming pools with a higher load or more intensive use. Thanks to the larger filter surface area and increased flow rate, this filter ensures faster and more efficient water purification.The tank is manufactured from reinforced polyester laminate, which ensures excellent durability and resistance to high pressure. The combination of a wide filling opening, low drain, and transparent lid makes this filter particularly user-friendly.This model is ideal for pool owners looking for a powerful and reliable filtration solution without compromising on quality and ease of use.

Read more less

The Flowdians Caraibes II 22 m³/h is designed for larger private swimming pools and offers a perfect combination of power, capacity, and durability. Thanks to the high-quality polyester construction with fiberglass reinforcement, the tank is resistant to intensive use and high pressure.The filter is equipped with a practical and low-maintenance design. The wide opening makes filling filter media easy, while the low drain ensures quick and efficient cleaning. The transparent lid provides extra control and safety.With its high filtration capacity, this filter ensures constant water quality, even with intensive use of the swimming pool.

Read more less

The Flowdians Caraibes II 15 m³/h is a powerful and versatile sand filter that is ideally suited for medium-sized swimming pools. Thanks to its robust construction made of polyester laminate with fiberglass reinforcement, this filter offers excellent resistance to pressure and wear, even with intensive use.The smart design ensures easy installation and maintenance-friendly operation. The wide opening makes filling quick and practical, while the low drain simplifies cleaning and replacing the filter medium. The sturdy and transparent lid ensures a secure seal and direct monitoring.With its higher capacity, this filter offers better water circulation and filtration, which results in clear and hygienic swimming pool water.

Read more less

The Flowdians Caraibes II 9 m³/h sand filter is the ideal choice for smaller private pools where reliability and ease of use are paramount. This filter is constructed from high-quality polyester laminate, reinforced with fiberglass through the simultaneous projection of resin and fibers. This ensures an extremely strong, pressure-resistant, and durable tank that will last for years.The design is fully focused on ease of use. The extra-wide filling opening makes adding filter sand or glass simple and quick, while the low drain significantly facilitates the emptying of water and filter media. The transparent bolt-on lid ensures a perfect seal and allows for a quick visual inspection of the filter without disassembly.With an efficient filtration capacity and a compact design, this model is perfect for smaller pools where stable water quality is important.

Read more less

The Hayward Powerline side mount sand filter is a high-quality solution for filtering water in your swimming pool or spa. With its durable construction and premium materials, this sand filter offers years of trouble-free use.The side-mount design ensures easy installation and maintenance, allowing you to spend more time in the water and less time maintaining your filter. The filter features a transparent cover for easy inspection of the filter media and a removable strainer basket for catching large debris.The Hayward Powerline side mount sand filter is available in various sizes, so you can choose the right filter for your specific pool or spa. The filter is designed to provide maximum flow and filtration with minimal pressure drop, resulting in efficient operation and a longer lifespan for your pool pump.With the Hayward Powerline side mount sand filter, you are assured of clean and clear water in your pool or spa, allowing you to enjoy your time in the water without having to worry about water quality. The filter is easy to operate and maintain, so you can always enjoy a perfect swimming experience.

Read more less

The Hayward Powerline side mount sand filter is a high-quality solution for filtering the water in your swimming pool or spa. With its durable construction and premium materials, this sand filter offers years of trouble-free use.The side-mount design ensures easy installation and maintenance, allowing you to spend more time in the water and less time maintaining your filter. The filter is equipped with a transparent cover for easy inspection of the filter media and a removable strainer basket for catching large debris.The Hayward Powerline side mount sand filter is available in various sizes, so you can choose the right filter for your specific pool or spa. The filter is designed to provide maximum flow and filtration with minimal pressure drop, resulting in efficient operation and a longer lifespan for your pool pump.With the Hayward Powerline side mount sand filter, you are assured of clean and clear water in your pool or spa, while enjoying your time in the water without having to worry about water quality. The filter is easy to operate and maintain, so you can always enjoy a perfect swimming experience.

Read more less

The Hayward Powerline side mount sand filter is a high-quality solution for filtering water in your swimming pool or spa. With its durable construction and premium materials, this sand filter offers years of trouble-free use.The side-mount design ensures easy installation and maintenance, allowing you to spend more time in the water and less time maintaining your filter. The filter is equipped with a transparent cover for easy inspection of the filter media and a removable strainer basket to catch large debris.The Hayward Powerline side mount sand filter is available in various sizes, so you can choose the right filter for your specific pool or spa. The filter is designed to provide maximum flow and filtration with minimal pressure drop, resulting in efficient operation and a longer service life for your pool pump.With the Hayward Powerline side mount sand filter, you are assured of clean and clear water in your pool or spa, allowing you to enjoy your time in the water without having to worry about water quality. The filter is easy to operate and maintain, so you can always enjoy a perfect swimming experience.

Read more less

The Hayward Powerline side mount sand filter is a high-quality solution for filtering water in your swimming pool or spa. With its durable construction and premium materials, this sand filter offers years of trouble-free use.The side-mount design ensures easy installation and maintenance, allowing you to spend more time in the water and less time maintaining your filter. The filter features a transparent cover for easy inspection of the filter media and a removable strainer basket to catch large debris.The Hayward Powerline side mount sand filter is available in various sizes, so you can choose the right filter for your specific pool or spa. The filter is designed to provide maximum flow and filtration with minimal pressure drop, resulting in efficient operation and a longer service life for your pool pump.With the Hayward Powerline side mount sand filter, you are assured of clean and clear water in your pool or spa, while you enjoy your time in the water without having to worry about water quality. The filter is easy to operate and maintain, so you can always enjoy a perfect swimming pool experience.

Read more less

The Hayward Powerline side mount sand filter is a high-quality solution for filtering the water in your swimming pool or spa. With its durable construction and high-grade materials, this sand filter offers years of trouble-free use.The side-mount design ensures easy installation and maintenance, allowing you to spend more time in the water and less time maintaining your filter. The filter features a transparent lid for easy inspection of the filter media and a removable strainer basket for catching large debris.The Hayward Powerline side mount sand filter is available in various sizes, so you can choose the right filter for your specific pool or spa. The filter is designed to provide maximum flow and filtration with minimal pressure drop, resulting in efficient operation and a longer lifespan for your pool pump.With the Hayward Powerline side mount sand filter, you are assured of clean and clear water in your pool or spa, while you enjoy your time in the water without having to worry about water quality. The filter is easy to operate and maintain, so you can always enjoy a perfect pool experience.

Read more less

The Hayward Powerline top mount sand filter is a reliable and efficient solution for filtering water in your swimming pool or spa. With its durable construction and high-quality materials, this sand filter offers years of trouble-free use.The top-mount design ensures easy installation and maintenance, allowing you to spend more time in the water and less time maintaining your filter. The sand filter is equipped with a transparent valve for easy inspection of the filter media and a removable strainer basket to collect large debris.The Hayward Powerline top mount sand filter is available in various sizes, so you can choose the right filter for your specific pool or spa. The filter is designed to provide maximum flow and filtration with minimal pressure drop, resulting in efficient operation and a longer service life for your pool pump.With the Hayward Powerline top mount sand filter, you are assured of clean and clear water in your pool or spa, while you enjoy your time in the water without having to worry about water quality.

Read more less

The Hayward Powerline top mount sand filter is a reliable and efficient solution for filtering the water in your pool or spa. With its durable construction and high-quality materials, this sand filter offers years of trouble-free use.The top-mount design ensures easy installation and maintenance, allowing you to spend more time in the water and less time maintaining your filter. The sand filter features a transparent cover for easy inspection of the filter media and a removable strainer basket to catch large debris.The Hayward Powerline top mount sand filter is available in various sizes, so you can choose the right filter for your specific pool or spa. The filter is designed to provide maximum flow and filtration with minimal pressure drop, resulting in efficient operation and a longer service life for your pool pump.With the Hayward Powerline top mount sand filter, you are assured of clean and clear water in your pool or spa, while enjoying your time in the water without having to worry about water quality.

Read more less

The Hayward Powerline top-mount sand filter is a reliable and efficient solution for filtering water in your swimming pool or spa. With its durable construction and high-quality materials, this sand filter offers years of trouble-free use.The top-mount design ensures easy installation and maintenance, allowing you to spend more time in the water and less time maintaining your filter. The sand filter is equipped with a transparent cover for easy inspection of the filter media and a removable strainer basket to catch large debris.The Hayward Powerline top-mount sand filter is available in various sizes, so you can choose the right filter for your specific pool or spa. The filter is designed to provide maximum flow and filtration with minimal pressure drop, resulting in efficient operation and a longer lifespan for your pool pump.With the Hayward Powerline top-mount sand filter, you are assured of clean and clear water in your pool or spa, allowing you to enjoy your time in the water without having to worry about water quality.

Read more less

The Hayward Powerline top mount sand filter is a reliable and efficient solution for filtering water in your swimming pool or spa. With its durable construction and high-quality materials, this sand filter offers years of trouble-free use.The top-mount design ensures easy installation and maintenance, allowing you to spend more time in the water and less time maintaining your filter. The sand filter is equipped with a transparent valve for easy inspection of the filter media and a removable strainer basket to catch large debris particles.The Hayward Powerline top mount sand filter is available in different sizes, so you can choose the right filter for your specific pool or spa. The filter is designed to provide maximum flow and filtration with minimal pressure drop, resulting in efficient operation and a longer lifespan for your pool pump.With the Hayward Powerline top mount sand filter, you are assured of clean and clear water in your pool or spa, while you enjoy your time in the water without having to worry about the quality of the water.

Read more less

The Hayward Powerline top-mount sand filter is a reliable and efficient solution for filtering the water in your pool or spa. With its durable construction and high-quality materials, this sand filter offers years of trouble-free use.The top-mount design ensures easy installation and maintenance, allowing you to spend more time in the water and less time maintaining your filter. The sand filter is equipped with a transparent cover for easy inspection of the filter media and a removable strainer basket to catch large debris.The Hayward Powerline top-mount sand filter is available in various sizes, so you can choose the right filter for your specific pool or spa. The filter is designed to provide maximum flow and filtration with minimal pressure drop, resulting in efficient operation and a longer service life for your pool pump.With the Hayward Powerline top-mount sand filter, you are assured of clean and clear water in your pool or spa, allowing you to enjoy your time in the water without having to worry about water quality.

Read more less

The Zodiac MS 950 sand filter is supplied with a 6-way valve, filler cap, screw set, pressure gauge kit, and air purge. The tank of the Zodiac sand filter is made of fiberglass-reinforced polyester. The diameter of the tank is 950 mm. Features of the Zodiac MS 950 max. flow rate: 30.0 m³/h threaded connection: 2" filtration surface area: 0.66 m² maximum pressure: 2.5 bar weight: 60 kg

Read more less

The Zodiac MS 800 sand filter comes complete with a 6-way valve, filler cap, screw set, pressure gauge kit, and air vent. The tank of the Zodiac sand filter is made of fiberglass-reinforced polyester. The diameter of the tank is 798 mm. Features of the Zodiac MS 800 max. flow rate 23.3 m³/h Ø 798 mm x 984 mm (H) threaded connection: 2" filtration surface area: 0.47m² maximum pressure: 2.5 bar weight: 37kg

Read more less

The Zodiac MS 530 sand filter is supplied with a 6-way valve, filling cap, screw set, pressure gauge kit, and air vent. The tank of the Zodiac sand filter is made of fiberglass-reinforced polyester. The diameter of the tank is 532 mm. Zodiac MS 530 features max. flow rate 10.2 m³/h Ø 532 mm x 745 mm (H) thread connection: 1.5" filtration area: 0.2m² maximum pressure: 2.5 bar weight: 18kg

Read more less

The Zodiac MS filter offers a very solid filtration system for all types of swimming pools with a capacity of up to 170 m³. The durable polyester filters are designed to work with both filter sand and filter glass.The filter is easy to maintain. Specifications: – Fiberglass-reinforced polyester filter tank.– Pressure gauge on the lid via threaded connection.– Threaded connections for easy maintenance (multiport valve and piping). Included accessories:– Multiport valve (side-mount).-Pressure relief valve and air bleed set.– Filter media filler cap.– 3/8’’ (water) / 2½’’ (filter media except for type MS 470).

Read more less