The Beatbot AquaSense 2 Pro is an advanced, fully cordless pool robot that takes care of almost all pool maintenance. While many pool robots are limited to the floor, walls, and waterline, the AquaSense 2 Pro goes a significant step further. This premium pool robot combines no fewer than 5 cleaning functions in one device: floor cleaning, wall cleaning, waterline cleaning, surface cleaning, and assistance in clarifying pool water.
With a powerful 13,400 mAh battery, 9 motors, 22 sensors, intelligent navigation, and ultrasonic obstacle detection, the AquaSense 2 Pro is designed for thorough and efficient cleaning of both small and very large pools.
And because the robot operates entirely cordlessly, you do not have to deal with a long power cable running through the pool or getting tangled during cleaning.
Complete 5-in-1 pool cleaning
The great advantage of the Beatbot AquaSense 2 Pro is its versatility. One pool robot can perform different types of cleaning.
The AquaSense 2 Pro cleans:
Pool floor: vacuums up dirt, sand, leaves, and other debris from the floor.
Pool walls: climbs up suitable walls and brushes them while cleaning.
Waterline: cleans the zone around the waterline where dirt and residue often accumulate.
Water surface: can also remove floating debris such as leaves and insects from the water surface.
Water clarification: supports the ClearWater™ system in keeping pool water clear.
This allows the AquaSense 2 Pro to combine functions for which multiple devices or additional manual cleaning might normally be required.
Also cleans the water surface
A special advantage of the AquaSense 2 Pro is its active surface cleaning.
Many traditional pool robots move exclusively over the floor and against the walls. Leaves and insects that are still floating on the water must then be removed by the skimmer or with a pool net.
The AquaSense 2 Pro can also move independently at the water surface and collect floating debris there.
As a result, not only is the underwater portion of the pool cleaned, but the surface of the pool is also addressed.
Up to 11 hours of surface cleaning
The AquaSense 2 Pro features a large 13,400 mAh lithium-ion battery.
Depending on the chosen cleaning function, the robot can operate for a remarkably long time.
Surface cleaning: Up to 11 hoursFloor cleaning: Up to 5 hoursWalls and waterline: Up to 9.5 hours
This makes the robot also suitable for larger pools and long cleaning cycles.
The maximum recommended pool area is approximately 300 m², giving the AquaSense 2 Pro more than enough capacity for most private pools.
9 powerful motors
The Beatbot AquaSense 2 Pro features no fewer than 9 motors.
These are used for tasks including propulsion, water circulation, suction power, and precise control of the robot.
The maximum stated water flow/suction capacity is an impressive 5,500 GPH.
The combination of multiple motors ensures that the robot can not only clean powerfully but also maneuver precisely through the pool.
DuoSpeedFlex™ quad-brush system
Just vacuuming up dirt is not always enough. Dirt and residue can become stuck to the floor, walls, and waterline.
That is why the AquaSense 2 Pro features the DuoSpeedFlex™ quad-brush system.
The robot uses four brushes to actively loosen dirt before it is sucked up. This means surfaces are not just vacuumed, but also actively brushed.
This is especially useful for dirt that is not loose on the pool floor.
Dual filtration from 150 microns
The sucked-up dirt is collected in a two-layer filter system.
The AquaSense 2 Pro combines an outer 150-micron filter with an inner 250-micron filter.
This allows the robot to catch various types of debris, including leaves, hair, insects, sand, and other small particles.
The outer filter basket has a capacity of approximately 3.7 liters and the inner filter section approximately 3.5 liters.
Thanks to access from the top, you can easily remove the filter system from the robot after use and rinse it clean.
CleverNav™ intelligent navigation
The AquaSense 2 Pro does not just drive randomly through the pool.
With CleverNav™, the robot analyzes its surroundings and determines an efficient route through the pool.
This allows the robot to treat the available surface systematically and limit unnecessary movements as much as possible.
On the pool floor and against the walls, the robot adapts its navigation to the environment.
This ensures more efficient cleaning and better coverage of the pool.
22 smart sensors
For its navigation, the AquaSense 2 Pro features no fewer than 22 sensors.
Among these are 2 ultrasonic sensors.
With SonicSense™ technology, the robot can detect its surroundings and obstacles. This information is used to adjust the route and navigate more precisely through the pool.
This is especially interesting for pools with unusual shapes, different corners, or other obstacles.
Powerful processor
All information from the various sensors must be processed at lightning speed.
That is why the AquaSense 2 Pro features a quad-core 1.8 GHz Cortex-A7 processor.
This processor works with Beatbot's navigation software to constantly determine the robot's position, route, and movements.
This allows the pool robot to react intelligently to its environment while cleaning.
Suitable for various pool shapes
The Beatbot AquaSense 2 Pro is not intended exclusively for rectangular pools.
The robot can be used in various shapes, including:
Rectangular pools
Round pools
Oval pools
Kidney-shaped pools
Free-form pools
This makes the AquaSense 2 Pro suitable for a wide variety of private pools.
Suitable for various pool surfaces
The AquaSense 2 Pro is also highly versatile regarding pool linings.
The robot can be used in pools with, among others:
ConcreteTilesVinylFiberglass
Actual climbing performance may vary depending on the slipperiness, incline, and construction of the pool walls.
ClearWater™ water clarification
In addition to mechanical cleaning, the AquaSense 2 Pro features ClearWater™ Natural Clarification.
With this function, a special clarifying agent can be used to aggregate fine suspended particles, helping to make the pool water clearer.
The necessary ClearWater™ agent is available separately.
This function does not, of course, replace normal pool filtration and water treatment. A proper filter system, correct pH level, and proper disinfection remain necessary.
Automatic parking at the water surface
Pulling a pool robot up from the floor can be quite inconvenient, especially with a robot weighing over 11 kg.
That is why the AquaSense 2 Pro features a smart parking function.
After cleaning, the robot can return to the pool edge and position itself at the water surface.
This makes it easier to remove from the pool without needing to reach for the floor with a hook or long pole.
SmartDrain™ automatic water drainage
When you take a pool robot out of the water, there is usually still a significant amount of water inside the housing.
The AquaSense 2 Pro therefore features SmartDrain™.
As soon as you remove the robot from the pool, the water inside can quickly drain out of the robot. This makes it lighter and easier to handle faster when taking it out.
This is a welcome feature, as the robot itself weighs approximately 11.38 kg.
Control via the Beatbot app
The AquaSense 2 Pro can be connected to the Beatbot app.
The robot supports both Wi-Fi and Bluetooth.
Through the app, you can manage various functions and adjust settings. During surface cleaning, you can also operate the robot remotely.
This is useful, for example, when you see that there are a lot of leaves floating on the water in one specific spot.
6 different cleaning modes
The AquaSense 2 Pro features 6 cleaning modes.
This allows you to adapt the cleaning to what your pool needs at that moment.
You therefore do not have to perform a full cleaning cycle every time if, for example, only the floor or the water surface needs attention.
This allows you to use the available battery capacity more efficiently.
Fully cordless
One of the biggest practical advantages is that the AquaSense 2 Pro works completely cordlessly.
During cleaning, no power cable runs from the robot to the edge of the pool.
This means:
No cable through the poolNo cable getting tangledNo cable getting stuck on obstaclesMore freedom of movement for the robotA tidier appearance during cleaning
This is a major advantage, especially for large or irregularly shaped pools.
Wireless charging station
After use, the AquaSense 2 Pro is placed on the accompanying wireless charging station.
The large 13,400 mAh battery takes approximately 4.5 hours to fully charge.
After that, the robot is ready for another extensive cleaning cycle.
Suitable for large pools
The combination of the large battery, intelligent navigation, and long runtime makes the AquaSense 2 Pro particularly suitable for larger pools.
The maximum stated pool area is approximately 300 m².
This gives the robot much more capacity than is necessary for most private pools.
Even in a pool of, for example, 8 x 4 or 10 x 5 meters, the robot has more than enough capacity.
IP68 waterproof construction
The pool robot itself has an IP68 rating.
This means the device is designed for long-term use underwater within the prescribed operating conditions.
The charging equipment must, of course, be placed outside the pool and according to the instructions.
The WYBOT M2 Vision is a powerful cordless robotic pool cleaner for cleaning large swimming pools. The robot cleans the floor, walls, and waterline and features a built-in camera with intelligent debris detection. In the special Vision mode, it searches for visible debris on the pool floor and navigates directly toward leaves, pebbles, sand piles, and other observable dirt.
With three motors, a power of 120 watts, and a suction capacity of 15 m³ per hour, the M2 Vision is among the more powerful cordless pool robots from WYBOT. The large 10,000 mAh lithium-ion battery offers a maximum runtime of approximately five hours in a suitable energy-saving program.
The dual filter system consists of a spacious five-liter filter basket with a mesh size of 180 microns and an additional 25-micron fine filter. This allows the robot to collect both leaves and insects as well as finer sand and settled dirt.
Intelligent camera with Vision technology
There is a camera on the front of the WYBOT M2 Vision. This camera is used to recognize visible debris on the pool floor.
In the special Vision or debris-search mode, the robot scans the floor. When the camera detects a buildup of dirt, the robot can adjust its route and suction power and drive directly toward the perceived debris. This means it does not have to cover the entire floor in a fixed pattern during a targeted cleaning.
According to WYBOT, the robot can perform a targeted floor cleaning in debris-search mode in approximately 10 to 15 minutes. This is a quick search run for clearly visible debris. The stated time is not a guarantee that every pool floor will be completely and thoroughly cleaned within 15 minutes. A longer standard program may be required for a complete cleaning.
The camera function works best when:
The pool water is clear
The camera lens is clean
There is sufficient light in the pool
The debris contrasts clearly with the floor
There is little floating debris in the water
Small, transparent, or low-contrast debris particles may be less easily recognized. Murky water, strong reflections, shadows, or deposits on the lens can also affect performance.
Self-learning cleaning
The Vision technology is combined with software that analyzes the observed pool environment. According to the manufacturer, the robot can adjust its movements and suction power based on the conditions in the pool.
The robot does not use the camera to store a permanent three-dimensional map of the pool. The system primarily supports the recognition of visible debris and route selection during the cleaning cycle.
New software versions can be installed via OTA updates. This allows WYBOT to further update features, settings, and navigation behavior.
Floor, walls, and waterline
The M2 Vision can clean different parts of the pool separately or in combination:
Floor: for leaves, sand, hair, insects, and settled debris.
Walls: the robot drives up suitable pool walls.
Waterline: cleans the edge where dirt and deposits collect.
Wall followed by floor: starts with the walls and then switches to floor cleaning.
Full pool: combines floor, wall, and waterline cleaning.
Turbo floor: intensive floor cleaning with extra emphasis on suction power.
Eco: more economical program for a longer runtime.
Vision floor: uses the camera for targeted searching of visible debris.
Expert: offers additional settings for experienced users.
European product information mentions eight cleaning modes, while the selection list contains various overlapping zone and program settings. The exact menu structure may change due to app and firmware versions.
Navigation with multiple sensors
The WYBOT M2 Vision uses several sensors to support its movements:
Camera: recognizes visible debris on the pool floor.
Gyroscope: records movements and changes in direction.
Infrared sensors: support the recognition of walls and obstacles.
Depth sensor: helps the robot determine its position underwater.
Three movement patterns for the floor and three for the walls are available via the WYBOT app. This allows the cleaning behavior to be better aligned with the shape and layout of the pool.
Obstacles such as stairs, drains, sharp corners, and height differences can influence the route. The robot attempts to process these conditions, but manual follow-up may remain necessary around complex objects.
Three motors with 120 watts of power
The M2 Vision features three motors with a combined rated power of 120 watts. The system achieves a water flow rate of up to 15 m³ per hour.
The active brushes loosen debris and guide it toward the suction opening. The tracks provide grip on the floor and help the robot climb suitable walls.
With a travel speed of approximately 10 meters per minute and a long runtime, the M2 Vision is designed for large pools and extensive cleaning cycles.
The actual climbing capability depends on the pool finish, the slope angle, the shape of the transition between floor and wall, and the presence of algae or greasy deposits. Grip may decrease on very smooth walls.
Dual filtration with a five-liter capacity
The WYBOT M2 Vision uses a dual filter system:
A 180-micron filter basket for leaves, insects, hair, and coarser debris.
A cotton fine filter of approximately 25 microns for smaller debris particles.
According to the manufacturer, the filter basket has a capacity of approximately five liters. Due to this large capacity, the basket needs to be emptied less frequently during normal use than a smaller filter system.
The fine filter helps catch small sand particles and settled dust. In a pool with a lot of very fine debris, this filter layer may become saturated more quickly. A full or clogged filter limits water flow and reduces suction power.
The filter basket is accessible from the top. After each cleaning session, the basket and fine filter must be removed from the robot and rinsed with clean water.
Up to five hours of cordless cleaning
The M2 Vision has a 10,000 mAh lithium-ion battery with a rated voltage of 25.5 volts. According to the manufacturer, the robot can operate for a maximum of approximately five hours in a suitable Eco floor program.
The actual runtime depends on:
The selected cleaning program
The number of wall climbs
The use of Turbo or Vision mode
The amount of debris in the filters
The water and ambient temperature
The condition and age of the battery
A full charge takes about three hours according to the current European product page. Some manuals mention a charging time of approximately 3.5 hours. The robot must always be charged outside the pool, and the charging port must be completely dry.
Timer for multiple cleaning sessions
The available timer duration can be divided over several shorter cleaning cycles. The European product documentation mentions the following settings:
1 cycle of 180 minutes
2 cycles of 90 minutes
3 cycles of 60 minutes
4 cycles of 45 minutes
These settings are primarily intended for regular floor maintenance. The robot can use them to distribute its available energy over multiple cleaning moments.
Although the maximum battery life in Eco floor mode can be approximately five hours, the timer function uses a maximum of 180 minutes divided into one to four cycles. Therefore, runtime and adjustable timer time are not the same.
After the available battery capacity is exhausted, the robot must be removed from the pool, cleaned, and recharged.
Control via the WYBOT app
The M2 Vision is configured via the WYBOT app. Using the app, you can, among other things:
Select the desired cleaning zone
Activate the Vision debris-search mode
Select a floor or wall route
Choose Turbo, Eco, or Expert mode
Set a timer program
View battery status
Adjust cleaning settings
Install OTA software updates
The wireless connection works best when the robot is out of the water or close to the water surface. Bluetooth and other radio signals have limited range underwater.
The M2 Vision does not have a full-fledged live underwater remote control. Therefore, select the desired program before the robot is fully submerged.
Suitable for large pools
The long runtime, powerful motors, and five-liter filter basket make the M2 Vision suitable for large pools. Some official manuals state a maximum pool surface area of up to 400 m².
This is a technical maximum specification. The surface area that can actually be thoroughly cleaned during one cycle depends on:
The shape of the pool
The selected cleaning zone
The depth of the pool
The number of obstacles
The degree of contamination
The selected route pattern
The cleaning mode used
According to the manufacturer, the robot is suitable for rectangular, round, oval, and free-form pools. It can be used on common pool surfaces such as liner, tiles, concrete, and polyester shells.
Automatic stop at the edge
When the cleaning cycle is complete or the battery is nearly empty, the robot drives to the edge of the pool. It can then be brought to an accessible spot using the included retrieval hook.
Afterward, use the handle to lift the robot out of the water. Hold it as vertically as possible so that the water can drain from the housing.
The retrieval hook is intended to pull the robot toward you. Do not lift the full weight by the hook, cable, or any other loose part for an extended period.
Package contents
WYBOT M2 Vision pool robot
180-micron filter basket
25-micron cotton fine filter
Charger
Floating components
Retrieval hook
User manual
Quick start guide
Difference between the M2 and M2 Vision
The WYBOT M2 Vision has a camera and a special debris-search mode. This allows it to recognize visible debris and approach it in a targeted manner. An M2 version without the Vision function follows its set navigation patterns without visual debris recognition.
The main reason to choose the Vision version is therefore the ability to quickly track down clearly visible debris on the floor.
Difference with the S2 Vision
The M2 Vision is larger and more powerful than the S2 Vision:
The M2 Vision has a power of 120 watts; the S2 Vision, 90 watts.
The M2 Vision has a suction capacity of 15 m³/h; the S2 Vision, 14 m³/h.
The M2 Vision has a 10,000 mAh battery; the S2 Vision, 7,800 mAh.
The M2 Vision operates for a maximum of about five hours; the S2 Vision for about 3.5 hours.
The M2 Vision has a filter basket of about five liters.
The M2 Vision weighs about 11 kg; the S2 Vision about 8.5 kg.
The M2 Vision is therefore particularly interesting for large pools and heavy-duty cleaning. The S2 Vision is lighter and easier to handle.
Conclusion
The WYBOT M2 Vision is a powerful cordless pool robot for large pools and intensive maintenance. The combination of a camera with debris recognition, three motors, 120 watts of power, 15 m³/h suction capacity, and a 10,000 mAh battery provides extensive cleaning capabilities.
The Vision mode is especially suitable for quickly tracking down clearly visible debris on the floor. For a complete cleaning, the robot can also treat the floor, walls, and waterline. The dual filtration and five-liter filter basket make it suitable for both coarser debris and finer sand and dust.
The WYBOT S2 Vision is a powerful cordless robotic pool cleaner with an integrated camera and intelligent dirt detection. The robot cleans the floor, walls, and waterline and uses a combination of camera images, a gyroscope, infrared sensors, and a depth sensor to navigate through the pool.
In the special Vision mode, the camera searches for visible dirt on the pool floor. When the robot detects dirt, it adjusts its route to specifically clean that area. This makes the S2 Vision particularly suitable for pools where leaves, insects, and other clearly visible dirt particles regularly end up on the floor.
With three motors, a power of 90 watts, a suction capacity of 14 m³ per hour, and a dual filter system, the robot delivers powerful cleaning performance. The built-in 7,800 mAh battery offers a maximum runtime of approximately 3.5 hours, depending on the selected program.
Cleaning of floor, walls, and waterline
The WYBOT S2 Vision can clean different parts of the pool separately or in combination:
Floor cleaning: for leaves, sand, hair, insects, and settled dirt.
Wall cleaning: the robot drives up suitable pool walls.
Waterline cleaning: removes dirt and grime along the water's edge.
Walls and floor: combines both cleaning zones in a single program.
Full pool: cleans the floor, walls, and waterline.
Vision floor mode: uses the camera to specifically look for visible dirt.
Turbo mode: more intensive cleaning for a heavily soiled pool.
Eco mode: reduces energy consumption and distributes battery capacity more efficiently.
Expert mode: provides more extensive settings via the app.
Three basic programs can be selected directly using the button on the robot: floor, walls, or floor and walls. The other settings and route options are available via the WYBOT app.
Camera with intelligent dirt detection
There is a camera on the front of the S2 Vision. This camera is activated underwater and helps the robot recognize visible dirt on the pool floor.
In Vision mode, the robot scans the floor. As soon as the system detects a dirt particle, the robot can adjust its direction of movement and drive to that spot. This means it doesn't just follow a pre-selected route, but can also respond specifically to detected debris.
The camera function works best when:
The pool water is clear
The camera lens is clean and undamaged
There is sufficient light in the pool
The dirt has sufficient contrast with the pool floor
There is not too much floating debris in the water
Very small, transparent, or low-contrast dirt can be less easily recognized by a camera system. Shadows, reflections, and cloudy water can also affect performance.
Smart navigation with multiple sensors
The WYBOT S2 Vision uses multiple sensors to support its movements:
Camera: for visual recognition of dirt on the floor.
Gyroscope: registers movements and changes in direction.
Infrared sensors: support recognition of the environment and obstacles.
Depth sensor: helps the robot determine its position underwater.
By combining data from these sensors, the robot can adjust its route to the shape and depth of the pool. Several movement patterns are available via the app, including three routes for the floor and three routes for the walls.
The S2 Vision does not create a permanent three-dimensional map of the pool. The camera and sensors support navigation during the active cleaning cycle.
Powerful motors and high suction capacity
The S2 Vision features three motors with a total specified power of 90 watts. The filter system processes up to approximately 14 m³ of water per hour. This allows the robot to powerfully pull dirt into the filter basket.
An active scrubbing brush loosens stuck-on dirt and directs it toward the intake. The tracks provide grip on the floor and help the robot climb suitable pool walls.
The average travel speed is approximately 10 meters per minute. The combination of powerful motors, a wide intake, and intelligent navigation makes the robot suitable for regular full cleaning cycles.
Dual filtration of 180 and 25 microns
The WYBOT S2 Vision uses a dual filter system:
A 180-micron filter basket for leaves, insects, hair, and coarser debris.
A cotton fine filter of approximately 25 microns for smaller dirt particles.
The first filter layer prevents coarser debris from immediately saturating the fine filter. The second layer catches smaller particles, such as fine sand and settled dust. This allows the S2 Vision to provide finer filtration than robots equipped only with a coarse filter basket.
The filter basket is accessible from the top. After use, the basket can be removed from the robot and rinsed out with clean water. The fine filter must also be cleaned regularly.
When the pool contains a lot of fine dirt, the 25-micron filter may clog faster. A saturated filter reduces water flow and thus the suction power. Therefore, check the filters after every cleaning session.
Up to 3.5 hours of cordless cleaning
The built-in lithium-ion battery has a capacity of 7,800 mAh and a voltage of 25.2 volts. According to European product information, the S2 Vision can operate for up to approximately 3.5 hours.
The actual runtime depends on:
The chosen cleaning program
The number of walls climbed
The use of Vision or Turbo mode
The water temperature
The age and condition of the battery
The amount of dirt in the filters
A full charge takes about three hours. The robot must be charged outside the pool and with a dry charging connection.
Because the robot operates without a cable, it has great freedom of movement. During cleaning, there is no floating power cable in the pool that can get tangled or limit the route.
Operation via the WYBOT app
The S2 Vision can be configured directly on the device and via the WYBOT app. In the app, you can, among other things:
Select the desired cleaning zone
Activate Vision mode
Choose a floor or wall route
Select Turbo or Eco cleaning
Set timer programs
Check battery status
Adjust cleaning settings
Install software updates
The robot supports OTA updates. This allows WYBOT to make improvements to the software, navigation, or user settings available.
The wireless app connection has a limited range underwater. It is therefore wise to choose the program before the robot is fully submerged. The standard S2 Vision does not have an underwater remote control.
Timer for multiple cleaning cycles
The available battery life can be divided into multiple shorter maintenance sessions. The European product specification mentions the following settings:
1 cycle of 200 minutes
2 cycles of 100 minutes
3 cycles of approximately 66 minutes
4 cycles of 50 minutes
This allows the robot to distribute its available battery capacity over multiple moments. This is useful for regular maintenance where a full intensive cleaning session is not required every time.
The timer function does not replace charging. Once the available battery capacity is used up, the robot must be removed from the pool and recharged.
Automatic stop at the pool edge
When a cleaning program is finished or the battery is nearly empty, the robot seeks the edge of the pool. It can then be pulled to the waterline with the included retrieval hook.
Afterwards, the robot must be lifted out of the water by its handle. Keep it as upright as possible so that any water inside can drain quickly from the housing.
The robot should not be lifted by the retrieval hook or a loose part for long periods. Use the hook only to bring it within reach.
Suitable for various pools
The WYBOT S2 Vision is suitable for a wide range of pool types and shapes:
Rectangular pools
Round pools
Oval pools
Free-form pools
In-ground pools
Suitable above-ground pools with sturdy walls
According to the manufacturer, the robot can be used on common pool surfaces, including:
Liner
Tiles
Concrete
Fiberglass pools
The European product information recommends the S2 Vision for pools up to approximately 10 × 5 meters, or about 50 m². The actual coverage depends on the shape, depth, number of obstacles, and the degree of dirt in the pool.
Difference between S2 and S2 Vision
The WYBOT S2 Vision adds a camera and targeted dirt detection to the features of the standard S2. In Vision mode, the robot searches for visible dirt and adjusts its route accordingly.
The base performance is otherwise comparable, including cleaning the floor, walls, and waterline, dual filtration, powerful motors, and operation via the WYBOT app.
Difference from the S2 Solar Vision
The standard S2 Vision is charged with a separate mains charger. It has no floating solar panel or automatic charging station.
The S2 Solar Vision comes with a separate charging station and solar panel and supports additional communication for underwater control. Therefore, carefully check whether you are purchasing the S2 Vision or the S2 Solar Vision.
Conclusion
The WYBOT S2 Vision is a powerful robotic pool cleaner for users who want to combine long cordless cleaning cycles with camera-guided dirt detection. Thanks to the 7,800 mAh battery, the robot can work for up to approximately 3.5 hours. The suction capacity of 14 m³ per hour and dual filtration of 180 and 25 microns make it suitable for both leaves and finer settled dirt.
The Vision mode is especially useful when clearly visible dirt is regularly present on the floor. For general pool maintenance, the robot can also clean the floor, walls, and waterline using various fixed route patterns.
The WYBOT C2 Pro Vision is an advanced cordless robotic pool cleaner featuring a built-in camera, artificial intelligence, sonar, and gyroscopic navigation. The robot cleans the floor, walls, and waterline and can, thanks to its special Vision mode, recognize visible debris on the pool floor and target it directly.
With a suction capacity of 11.5 m³ per hour, three motors, and a dual filtration system, the C2 Pro Vision removes leaves, insects, hair, sand, and fine dirt. The combination of a 180-micron filter basket and an ultra-fine filter ensures that both coarse debris and small particles are captured.
The C2 Pro Vision operates on a built-in battery and therefore does not require a power cable during cleaning. Via the WYBOT app, you can select cleaning programs, path patterns, and timer settings. The robot is designed for various shapes, sizes, and pool surfaces and, according to European product information, can be used in pools up to approximately 200 m².
Camera with artificial intelligence
The main difference between the C2 Pro Vision and the regular C2 Pro is the front-facing camera. This camera is used to visually recognize debris on the pool floor.
In the special Vision or dirt-search mode, the robot scans its surroundings and looks for visible debris. As soon as the camera recognizes dirt, the robot can adjust its route and drive directly to the specific area. This means it does not have to rely solely on a fixed pattern and can pay extra attention to spots where there is actual debris.
The camera is only activated underwater. According to the manufacturer, the system uses artificial intelligence and machine learning software to further improve recognition and route selection. Software enhancements can be installed via OTA updates in the WYBOT app.
The camera's performance can be affected by water clarity, lighting, shadows, the color of the pool floor, and the visibility of the debris. A clean and undamaged camera lens is therefore important for good debris recognition.
Cleaning the floor, walls, and waterline
The WYBOT C2 Pro Vision can clean various parts of the pool separately or in combination:
Floor cleaning: removes leaves, sand, hair, insects, and other settled debris.
Wall cleaning: the robot climbs up suitable pool walls.
Waterline cleaning: cleans the edge where grease, dirt, and deposits can accumulate.
Floor and walls: combined program for a complete cleaning cycle.
Full pool: cleans the floor, walls, and waterline within a single program.
Vision mode: uses the camera to search for visible debris on the floor and target it for suction.
Turbo floor program: focuses on powerful and intensive floor cleaning.
Eco program: extends the operating time by using available energy more efficiently.
Expert settings: provide additional options to customize cleaning behavior.
Actual performance on walls and at the waterline depends on the pool lining, slope angle, pool shape, and surface grip. Very slippery walls, sharp transitions, and complex steps can affect climbing ability.
Navigation with camera, sonar, and gyroscope
The C2 Pro Vision combines three navigation techniques:
Camera: recognizes visible debris on the pool floor.
Sonar sensors: help detect walls and obstacles.
Gyroscope: registers movements and changes in direction.
By combining these systems, the robot can adjust its route to the pool environment. Three movement patterns for the floor and three for the walls are available via the app. This allows the route to be better tailored to the shape and layout of the pool.
The robot does not create a permanent 3D map like some household robot vacuums. The sensors and camera are used to support movements during cleaning and to target visible debris.
Dual filtration system down to approx. 10 microns
The WYBOT C2 Pro Vision features a dual filtration system:
A removable 180-micron filter basket for leaves, insects, hair, and other coarser debris.
An ultra-fine filter for smaller debris particles.
According to European product information, the combined filtration system can capture debris particles down to approximately 10 microns. This makes the robot suitable for finer dust and small debris that might otherwise flow through the system with only a coarse filter basket.
The filter basket is accessible from the top. After each cleaning session, the filter basket and the ultra-fine filter can be removed and rinsed with clean water. A clean filter ensures better water flow and maintains suction power.
The ultra-fine filter may become saturated more quickly with very fine dirt. In a heavily soiled pool, it may therefore be necessary to thoroughly clean the filters during or after each cycle.
Cordless operation with built-in battery
The C2 Pro Vision is completely cordless. During use, there is no power cable in the pool, and no connection to the skimmer or filter system is required.
The built-in battery has a capacity of 4,600 mAh and a voltage of 21.6 volts. In a standard program, the runtime is approximately two hours. In the energy-efficient Eco floor program, the runtime can reach up to approximately three hours according to the manual.
When the program is finished or the battery is nearly empty, the robot automatically drives to the edge of the pool. It can then be guided to the waterline using the included retrieval hook. Afterward, lift the robot vertically out of the water by the handle so that any water inside can drain out.
A full charge takes approximately three to three and a half hours. The robot must always be charged outside the pool with a dry charging port.
Operation with the WYBOT app
You can manage cleaning settings via the WYBOT app. The available options include:
Choosing a cleaning program
Selecting floor, wall, or waterline cleaning
Activating Vision dirt-search mode
Choosing a movement pattern
Splitting the available battery life across multiple cycles
Checking battery status
Adjusting settings
Installing OTA software updates
The wireless connection works best when the robot is out of the water or close to the water surface. Wireless signals are severely limited underwater. The app is therefore primarily intended for pre-selecting settings and does not function as a full live remote control.
Distributed timer programs
The available cleaning time can be divided into several shorter sessions. The European product information lists the following options:
1 cycle of 120 minutes
2 cycles of 60 minutes
3 cycles of 40 minutes
4 cycles of 30 minutes
This function can be used to perform multiple short maintenance sessions. The robot remains in the pool between the set cycles for this purpose. Afterward, it must be removed from the water, cleaned, and charged.
Available timer functions may change due to software updates or different product versions.
Suitable for various pools
The WYBOT C2 Pro Vision is designed for in-ground and suitable above-ground pools of various shapes:
Rectangular pools
Round pools
Oval pools
Free-form pools
According to the manufacturer, the robot can be used on common pool surfaces, including:
Liner
Tiles
Concrete
Polyester or pool shell
The current European product page specifies a recommended pool surface area of up to approximately 200 m². Some manuals mention a range of approximately 150 to 180 m². Practical capacity depends on the shape, amount of debris, selected cleaning mode, and the number of obstacles in the pool.
Package contents
WYBOT C2 Pro Vision robotic pool cleaner
Charger
180-micron filter basket
Ultra-fine filter
Floating components
Retrieval hook
User manual
Quick start guide
Difference between the C2 Pro and C2 Pro Vision
The main difference is the camera. The standard WYBOT C2 Pro uses a gyroscope and sonar for its navigation. The WYBOT C2 Pro Vision adds a camera and AI-driven dirt recognition.
The Vision version can therefore recognize visible debris on the floor and drive directly toward it in the special dirt-search mode. The remaining basic performance, such as motor power, suction capacity, battery power, and dual filtration, is largely similar.
Conclusion
The WYBOT C2 Pro Vision is suitable for pool owners looking for a cordless pool robot with extensive cleaning capabilities and targeted debris recognition. The robot combines floor, wall, and waterline cleaning with a camera, artificial intelligence, sonar, and gyroscopic navigation.
The Vision mode is particularly advantageous when leaves or other clearly visible debris particles are frequently present on the floor. The dual filtration, powerful water flow, and extensive app settings make the robot suitable for thorough and regular pool maintenance.
The WYBOT C2 Pro is a powerful cordless pool robot for cleaning the floor, walls and waterline. Thanks to the built-in battery, the robot works in the pool without a power cable. This gives it a great deal of freedom of movement and ensures that no cable is left lying around the pool while cleaning.
The pool robot is equipped with three motors, a suction power of 11.5 m³ per hour, and a dual filter system. The first filter captures leaves, insects, hair, and other larger debris. The additional ultra-fine filter traps smaller particles, so that fine dust and settled dirt are also better removed from the pool water.
Using its gyroscope and ultrasonic sonar technology, the C2 Pro determines its position and adapts its route to the shape of the pool. Via the WYBOT app, you get access to additional settings, cleaning programs, and path selections. The robot is suitable for pools with various shapes and common linings.
Cordless cleaning without a cable in the pool
The WYBOT C2 Pro runs entirely on a rechargeable lithium-ion battery. You therefore do not need to connect a floating power cable. This simplifies use and prevents a cable from tangling during cleaning or restricting the robot's freedom of movement.
Depending on the selected cleaning mode, the robot can run for approximately 2 hours in a standard program. In an economical floor program, the maximum runtime according to the product documentation can reach up to approximately 3 hours. As a result, the C2 Pro is suitable for both a full cleaning session and several shorter maintenance cycles.
After use, the robot is removed from the water and charged on dry land. A full charge takes approximately three hours.
Cleaning of floor, walls and waterline
The C2 Pro can clean several parts of the pool:
Floor cleaning: for sand, leaves, hair, and settled dirt on the pool floor.
Wall cleaning: the robot climbs up suitable pool walls.
Waterline cleaning: removes dirt that accumulates along the edge of the water.
Combined cleaning: cleans the floor and walls during the same cycle.
Targeted programs: additional programs and movement patterns can be selected via the app.
Three basic programs can be selected on the robot itself: floor, walls, or floor and walls. For more extensive settings, the WYBOT app is used.
Actual climbing capability depends on the shape of the pool, the incline angle, the lining, water quality, and the amount of dirt on the surface.
Navigation with gyroscope and sonar
The pool robot combines a gyroscope with ultrasonic sensors. This technology helps the robot to recognize distances, walls, and changes in the pool environment. Based on this, it adjusts its driving direction and cleaning route.
Different movement patterns for the floor and walls can be chosen via the app. This helps to tailor the route to the shape of the pool. The manufacturer lists several route patterns, though the number available may vary by software version.
The navigation makes the cleaning more systematic, but does not form a complete three-dimensional map like some robots with a camera system. The C2 Pro has no AI camera; that feature belongs to the separate C2 Pro Vision model.
Dual filter system
The WYBOT C2 Pro has a dual filter system:
A filter basket with a mesh size of 180 microns for coarser dirt.
An additional ultra-fine filter for smaller dirt particles.
This combination makes the robot suitable for daily debris like leaves and insects, but also for finer dust that settles on the pool floor.
The filter basket is accessible from the top. After a cleaning session, the basket can be removed from the robot and rinsed out with clean water. Regular cleaning of the filters is important to maintain suction power and water flow.
Operation with the WYBOT app
Via the WYBOT app, you can set the available cleaning options. Depending on the installed software, the following programs are available, among others:
Floor
Walls
Waterline
Walls and floor
Full pool
Turbo floor cleaning
Eco
Expert
The app also provides access to additional settings, route patterns, and software updates. Thanks to OTA updates, the robot's software can be updated whenever the manufacturer makes improvements available.
The wireless connection is primarily intended for configuring the robot before it enters the water or while out of the water. Radio signals have only a limited range underwater. Therefore, the C2 Pro does not feature full live remote control that would allow you to steer it manually anywhere underwater.
Distributed cleaning cycles
The available battery capacity can be divided over multiple cleaning sessions. European product information mentions, among others, the following settings:
1 cycle of 120 minutes
2 cycles of 60 minutes
3 cycles of 40 minutes
4 cycles of 30 minutes
This allows the robot to perform maintenance at various times without you having to reselect a program for every short cycle. The exact timer settings may differ per firmware version or product series.
Suitable for various pools
According to the manufacturer, the WYBOT C2 Pro is suitable for diverse pool types and common pool linings. It can be used in rectangular, round, oval, and free-form pools.
The European product page mentions a recommended pool surface area of up to approximately 200 m². Other document versions mention lower surface areas. For the best result, the robot must have sufficient time to reach the entire pool. In the case of a very large pool, many obstacles, or a lot of dirt, multiple cleaning sessions may be required.
Contents of the packaging
WYBOT C2 Pro pool robot
Charger
180-micron filter basket
Ultra-fine filter
Floating components
Retrieval hook
User manual
Quick start guide
Conclusion
The WYBOT C2 Pro is a versatile pool robot for pool owners who want to have the floor, walls, and waterline cleaned cordlessly. The combination of three motors, a suction capacity of 11.5 m³ per hour, sonar-assisted navigation, and dual filtration makes it suitable for regular maintenance of medium and large pools.
The app offers more configuration options than the controls on the device itself, while the timer function makes multiple short maintenance sessions possible. Those looking for a model with a built-in camera and visual dirt recognition should specifically choose the WYBOT C2 Pro Vision.
The WYBOT S2 Solar is a cordless pool robot that cleans the pool floor, walls, and waterline. The system consists of a powerful pool robot and a magnetic solar charging station that is permanently installed on the edge of the pool.
After a cleaning program, the robot can automatically return to the charging station. Once the remaining battery charge drops below approximately 20 percent, it will attempt to reach the station to recharge wirelessly. The solar panel provides energy to the charging station. As a result, for regular maintenance, you do not need to remove the robot from the pool after every cycle and charge it manually.
For situations where there is insufficient sunlight, a power adapter is also included. This allows the battery to be charged in approximately three hours. The combination of solar energy and mains power makes the S2 Solar suitable for daily maintenance and more intensive cleaning after a period with a lot of debris.
Cleaning of floor, walls, and waterline
The WYBOT S2 Solar vacuums up loose debris from the pool floor and uses a high-speed front brush to loosen stubborn dirt. The robot can climb suitable pool walls and move along the waterline.
It is suitable for various pool surfaces, including:
Cement and concrete
Pool liner
Mosaic
Tiles
Other common hard pool finishes
Performance on walls and at the waterline depends on the pool's finish, shape, slope, and smoothness. Very slippery walls, sharp corners, high steps, or irregular transitions can affect grip and routing.
Seven cleaning programs
Via the WYBOT app, you can choose from seven programs:
Full pool: cleans the floor, walls, and waterline
Floor only: targeted program for the pool floor
Walls only: cleans the vertical pool walls
Waterline only: moves along the top edge of the water
Walls then floor: one combined cleaning cycle
Eco-floor mode: energy-efficient cleaning of the floor
Turbo-floor mode: more intensive floor cleaning with extra suction power
By choosing a program that matches the debris levels, the available battery capacity is used more efficiently. For example, when there is mostly sand and leaves on the floor, the robot does not need to waste energy cleaning the walls.
Scheduled cleaning
In the app, you can set a cleaning schedule. The robot will then start automatically at the chosen times. Afterward, it will attempt to return to the solar charging station.
This allows the S2 Solar to remain in the pool for extended periods and perform periodic maintenance. The filter basket still needs to be emptied and cleaned manually. Additionally, if there is insufficient sunlight, intermediate charging using the included power adapter may be necessary.
Automatic return and charging
When the battery is low, the robot searches for the charging station. The magnetic connection helps it get into place for wireless charging. The success of this process depends on the correct installation of the station and the shape of the pool.
According to the manual, the charging station requires a level location with a water depth of at least 1.2 meters. Directly below the station, there should be no stairs, seating areas, lighting, or other obstacles. The solar panel must receive sufficient direct sunlight.
Dual filtration
The 3D filtration system consists of two layers:
A 180-micron filter basket for leaves, insects, twigs, sand, and other visible debris
A fine 40 PPI filter sponge for smaller dirt particles
The dirt remains in the removable filter basket. After cleaning, open the robot, remove the basket, and rinse both filter layers with clean water. Regular cleaning is important to maintain suction power and water flow.
The pool robot does not replace the circulation pump, water treatment, or fixed pool filter. Dissolved substances, algae, and very fine contaminants must still be addressed by the regular pool system and proper water treatment.
Powerful, brushless drive
The brushless motor has a stated average water displacement of 3,962 gallons per hour, approximately 15 m³ per hour. The brushless construction is designed for high efficiency and less mechanical wear.
The robot moves at approximately 10 meters per minute and uses various route patterns to clean the selected zone. Actual coverage depends on the pool shape, obstacles, pollution level, and selected program.
Wireless control via the WYBOT app
The S2 Solar can be connected to the WYBOT app via Bluetooth. The app provides access to features including:
Choice of seven cleaning programs
Setting a cleaning schedule
Manual control
Checking status and battery charge
Returning to the charging station
Software and firmware updates
Because communication underwater is more limited than above water, the connection may be temporarily interrupted. To adjust certain settings or perform updates, it may be necessary for the robot to be in the charging station or taken out of the pool.
Package contents
WYBOT S2 Solar pool robot: 1 piece
Solar charging station: 1 set
Solar panel and associated floating components: 1 set
Floating blocks: 2 pieces
180-micron filter basket: 1 piece
Fine filter sponge: 1 piece
Power adapter: 1 piece
Retrieval hook: 1 piece
User manual: 1 piece
The WYBOT F1 is a cordless robotic skimmer that cruises independently across the surface of your pool. While navigating, it collects leaves, insects, hair, pollen, and other floating debris before it can sink to the bottom. This reduces the need for frequent manual skimming and lessens the load on your pool's primary skimmer and filtration system.
The robot is equipped with a solar panel boasting a rated output of 33 watts. When used in an outdoor pool, the battery can be recharged by sunlight. According to the manufacturer, a fully depleted battery requires approximately six hours of sunlight under ideal conditions to charge via the solar panel. For pools with limited direct sunlight or for indoor use, a separately sold power adapter is available. This adapter is not included as standard.
Two cleaning programs
The WYBOT F1 features two programs:
Smart Mode: the robot operates for up to 24 hours, following a cycle of ten minutes of cleaning followed by ten minutes of resting. This mode is designed to keep the water surface clean regularly throughout the day.
Standard Mode: the robot cleans continuously for up to eight hours. This program is suitable when large amounts of leaves or other debris need to be removed from the pool in a short time.
Actual runtime depends on battery charge, sunlight intensity, water temperature, and the resistance the robot encounters while moving.
Automatic navigation and edge cleaning
The robot moves independently across the water using a planned V-shaped route. Sensors help it detect obstacles and change direction, allowing it to maneuver around ladders, walls, and other objects.
With EdgeMaster edge cleaning, the F1 automatically finds the pool edge to collect accumulated surface debris there as well. An anti-stuck feature helps prevent the robot from beaching in shallow areas.
Suitability around ladders, cables, pool toys, and very narrow sections depends on your pool's layout. It is therefore best to remove loose objects from the water before the robot begins.
7-liter collection basket
Floating debris is captured in a removable basket with a capacity of 7 liters. Due to the large capacity, the basket needs to be emptied less frequently under normal conditions. The filter has a mesh size of 180 microns and is suitable for leaves, insects, hair, and smaller particles.
The F1 does not replace standard pool filtration and water treatment. Very fine dust, algae, and dissolved contaminants are not fully removed. A circulation pump, pool filter, and proper water treatment remain necessary for clear and healthy water.
No backflow of debris
The design helps prevent captured debris from flowing back out of the robot while turning or stopping. After use, the F1 can be brought to the pool edge using the included hook. You can then remove the filter basket from the device to empty it into a bin and rinse it with clean water.
Operation via the WYBOT app
The robot can be connected to the WYBOT app via Bluetooth. In the app, you can:
Choose between Smart or Standard mode
Check operating status
Control the robot manually
Navigate directly to local debris
Install available software updates
Manual control is especially useful when debris has gathered in one spot or when you want to steer the robot to the pool edge. Because the connection is via Bluetooth, your phone must be within range of the robot.
Suitable for various pools
The WYBOT F1 can be used in both inground and above-ground pools of various shapes. The device operates exclusively on the water surface. It does not clean the pool floor, walls, stairs, or waterline. A separate floor cleaner or manual pool vacuum is required for those tasks.
According to the manufacturer, the housing is resistant to UV radiation, high temperatures, rain, and normally chlorinated pool water. The robot has an IPX8 rating, meaning it is designed for use in water. This does not mean the charging port should be connected while wet. Let the connection dry completely before using an optional power adapter.
Package contents
WYBOT F1 robotic skimmer: 1 piece
Retrieval hook: 1 piece
User manual: 1 piece
Quick start guide: 1 piece
Power adapter: not included as standard
The Poolex Spawer O’SPA Flow combines heating, cooling, and water circulation in one compact heat pump. It has been developed for spas and Scandinavian hot tubs and is available in three versions: 3 kW, 5 kW, and 7 kW.
Its distinguishing feature is the integrated circulation pump. This ensures a regulated water flow through the titanium heat exchanger. As a result, the O’SPA Flow can be connected directly to the spa without a separate bypass for the heat pump. This makes the hydraulic installation more straightforward.
The O’SPA Flow has three operating modes. With heating, you can set a water temperature between 10 and 40 °C. With cooling, you can set the water between 2 and 30 °C, for example for a cold plunge or to cool the spa in warm weather. The automatic mode uses heating or cooling to maintain the set temperature. How quickly the water reaches the desired temperature depends on factors such as spa volume, weather, insulation, and cover.
Remote operation is also possible. You can adjust the temperature and operating mode via the built-in Wi-Fi and the Poolex app. The connection to the Poolex Cloud allows for remote software updates. In addition, a relay can control the electric heating of a suitable spa system when extra heating is needed.
Efficiency in practice
At an air temperature of 26 °C and a water temperature of 26 °C, the 7 kW version achieves a COP of 5.55. Under these test conditions, the heat pump delivers 5.55 kW of heat per kW of electricity consumed. At 15 °C air and 38 °C water, the COP is between 2.75 and 3.40, depending on the version. Efficiency and power consumption therefore change with the conditions.
According to the included product sheet, items such as hydraulic connectors, hose clamps, a relay, and a residual current device with cable are included. An external touch screen and an additional hydraulic connection kit are listed as optional accessories.
The Poolex Spawer O’SPA Flow combines heating, cooling, and water circulation in one compact heat pump. It has been developed for spas and Scandinavian baths and is available in three versions: 3 kW, 5 kW, and 7 kW.
Its distinguishing feature is the integrated circulation pump. This ensures an optimized water flow through the titanium heat exchanger. As a result, the O’SPA Flow can be connected directly to the spa without a separate bypass for the heat pump, which makes the hydraulic installation less complex.
The O’SPA Flow has three operating modes. With heating, you can set a water temperature between 10 and 40 °C. With cooling, you can set the water between 2 and 30 °C, for example for a cold plunge or to cool the spa during hot weather. The automatic mode uses heating or cooling to maintain the set temperature. How quickly the water reaches the desired temperature depends on factors such as spa volume, the weather, insulation, and the cover.
Remote control is also possible. Via the built-in Wi-Fi and the Poolex app, you can adjust the temperature and operating mode. The connection to the Poolex Cloud enables remote software updates. Additionally, a relay can control the electric heating of a suitable spa installation when extra heating is needed.
Efficiency in practice
At an air temperature of 26 °C and a water temperature of 26 °C, the 7 kW model achieves a COP of 5.55. Under these test conditions, the heat pump delivers 5.55 kW of heat per kW of electricity consumed. At 15 °C air and 38 °C water, the COP is between 2.75 and 3.40, depending on the model. Efficiency and power consumption therefore change with the conditions.
According to the included product sheet, items such as hydraulic connectors, hose clamps, a relay, and a residual-current device with cable are included. An external touchscreen and an additional hydraulic connection kit are listed as optional accessories.
The Poolex Spawer O’SPA Flow combines heating, cooling, and water circulation in one compact heat pump. It has been developed for spas and Scandinavian baths and is available in three versions: 3 kW, 5 kW, and 7 kW.
Its distinguishing feature is the integrated circulation pump. This ensures an optimized water flow through the titanium heat exchanger. Consequently, the O’SPA Flow can be connected directly to the spa without requiring a separate bypass for the heat pump, which simplifies the hydraulic installation.
The O’SPA Flow has three operating modes. With heating, you can set a water temperature between 10 and 40 °C. With cooling, you can set the water temperature between 2 and 30 °C, for example for a cold plunge or to cool the spa during hot weather. The automatic mode uses heating or cooling to maintain the set temperature. How quickly the water reaches the desired temperature depends on factors such as spa volume, the weather, insulation, and the cover.
Remote control is also possible. Via the built-in Wi-Fi and the Poolex app, you can adjust the temperature and operating mode. The connection to the Poolex Cloud allows for remote software updates. Additionally, a relay can control the electric heating of a suitable spa installation when extra heating is needed.
Efficiency in practice
At an air temperature of 26 °C and a water temperature of 26 °C, the 7 kW version achieves a COP of 5.55. Under these test conditions, the heat pump provides 5.55 kW of heat per kW of electricity consumed. At 15 °C air and 38 °C water, the COP, depending on the version, is between 2.75 and 3.40. Efficiency and power consumption therefore change with the conditions.
According to the included product sheet, items such as hydraulic connectors, hose clamps, a relay, and a residual current device with cable are included. An external touch screen and an additional hydraulic connection kit are listed as optional accessories.
The BIG-Bobby-Car-Classic is a red ride-on car for children aged 12 months and up. Its recognizable design, sturdy construction, and child-friendly shape make this classic suitable for a child's first independent rides. Children sit behind the wheel and move the car forward by pushing off with their feet.
From a lap around the room to an imaginary car ride: the Bobby-Car invites children to go exploring on their own. The horn in the steering wheel completes the driving fun.
Ergonomically designed for young drivers
The body of the BIG-Bobby-Car-Classic is tailored to the needs of young children. The ergonomic shape provides a seating position that allows children to push off with their feet. The steering wheel is easy to grip, allowing little drivers to practice steering and maneuvering themselves.
While driving, children combine different movements: pushing off, steering, and stopping. They set their own pace and playfully discover how to move the ride-on car in the desired direction.
Agile thanks to the Ackermann steering system
The Bobby-Car is equipped with a stepless Ackermann steering system. The front wheels turn at coordinated angles when steering, giving the car a small turning circle. This makes it easier to take corners and change direction.
The steering wheel moves without fixed steering positions, allowing children to make both small corrections and tighter turns during their ride.
Four sturdy wheels and a low center of gravity
The ride-on car stands on four sturdy wheels and has a low center of gravity. This combination contributes to stability while driving. The robust body provides a solid foundation for daily play.
The Bobby-Car is powered entirely by the child's own movements. There is no engine: the driver provides the speed by pushing off and can place their feet back on the ground to stop.
Knee recess for older children
The knee recess offers older children an extra way to play with the Bobby-Car. They can place one knee on the car and push off with the other foot.
This makes the ride-on car usable in different ways as the child grows. In addition to riding while sitting, it creates an alternative playing position for children who are tall and skilled enough for it.
Coupling options at the front and back
The BIG-Bobby-Car-Classic has a coupling option at both the front and the back. This allows the ride-on car to be combined with compatible accessories.
A matching trailer, for example, offers the ability to carry toys along on a ride. This turns the Bobby-Car into part of a delivery service, moving truck, or any other self-imagined adventure. Always check that accessories are suitable for this model.
Classic red version with horn
The red body gives the Bobby-Car its recognizable look. There is a horn in the steering wheel, allowing children to announce their arrival and add an extra dimension to their car ride.
The combination of driving, steering, and honking offers plenty of room for imaginative play. One moment the child is driving to an imaginary store, the next they are parking or transporting toys.
With the PVC suction lance for a 25-liter tank, you can safely and neatly connect a container of liquid pool chemicals to an automatic dosing pump. The lance is placed into the chemical tank and draws the dosing liquid through the connected hose to the dosing system.
This suction lance is suitable for, among other things, automatic pH control and other dosing installations that work with liquid pool chemicals. Thanks to its fixed placement, the suction hose remains correctly positioned in the container, and the liquid is drawn from the appropriate height.
Neat connection to a chemical tank
A loose suction hose can shift, curl up, or rise above the liquid level in the container. The PVC suction lance ensures a more stable and professional connection, allowing the dosing pump to reliably draw liquid from the tank.
The lance is intended for use in a tank or jerrycan with a capacity of 25 liters. Always check in advance whether the length of the lance, the connection, and the seals used are suitable for your chemical tank and dosing system.
For automatic pool water treatment
The suction lance can be used with various automatic dosing systems, for example for:
Liquid pH-minus
Liquid pH-plus
Liquid chlorine
Other permitted dosing liquids
Use the lance exclusively with chemicals for which the PVC and the seals present are suitable. Never combine different chemicals using the same lance and dosing hose.
Reliable dosing
By connecting the suction lance to the dosing pump, the liquid is guided from the tank to the injection point in the pool installation. The dosing pump then determines how much liquid is added.
The suction lance does not dose independently. A suitable dosing pump or automatic dosing system is always required for this.
Safe use
Always place the tank upright in a chemical-resistant drip tray and in a well-ventilated technical room. Wear suitable gloves and eye protection when connecting and replacing chemicals.
Always use separate suction lances, dosing hoses, and pumps for acid and liquid chlorine. Never mix these agents. Do not simply rinse a used suction lance to subsequently use it for a different chemical liquid.
Regularly check:
That the lance is securely seated in the tank
That the hose is properly connected
That there are no leaks present
That the suction point is not clogged
That the material shows no signs of discoloration, deformation, or wear
Note
Before ordering, check the length, hose connection, tank opening, and chemical resistance. A 25-liter tank does not always have a universal cap size. Consequently, an additional cap, coupling nut, or adapter may be required.
Keep your pool water pleasantly warm for longer while simultaneously limiting water evaporation and contamination with the GRE Oval Summer Cover for pools of 730 x 375 cm. This isothermal cover has been specially developed for large oval pools and forms an insulating layer directly on the water surface.
The summer cover is ideal as an addition to the GRE Ovalada Oval Steel Pool - 730 cm x 375 cm x 132 cm. The cover is placed directly onto the pool water and floats on it. As a result, no attachment with cables or tensioners is required.
The cover helps to keep the accumulated heat in the pool for longer, reduces evaporation, and ensures that leaves, insects, and other coarse debris do not end up in the pool water as easily.
Specifically for oval pools of 730 x 375 cm
The GRE CPROV730 summer cover is developed for oval pools with a nominal size of 730 x 375 cm.
Unlike a winter cover, a summer cover is not stretched over the outside of the pool structure. It is placed directly on the water surface within the pool walls.
As a result, the cover may be slightly smaller than the nominal outer dimensions of the pool.
Keep the heat in the pool for longer
A large pool contains a lot of water. Once the pool has warmed up, you naturally want to retain that heat for as long as possible.
A large part of heat loss occurs via the open water surface. Especially during cooler nights, the temperature of an uncovered pool can drop noticeably.
The GRE isothermal summer cover forms an insulating layer between the pool water and the outside air. This limits heat loss and helps the accumulated heat to be retained for longer.
Ideal when using a pool heat pump
For a pool of 730 x 375 cm, a summer cover is particularly interesting if you are using a pool heat pump.
The heat pump heats the pool water, while the cover helps prevent a large part of that heat from being lost again through the water surface.
This means the heat pump has to replenish less lost heat. This can help to significantly reduce the energy consumption for heating the pool.
For the most efficient pool heating possible, it is therefore wise to cover the pool as soon as it is no longer being used for swimming.
Up to approx. 50% less water evaporation
During warm, dry, and windy periods, a large open pool can lose a significant amount of water daily through evaporation.
A summer cover covers almost the entire water surface and therefore reduces direct contact between the pool water and the outside air.
According to GRE, using a cover during the high season of approximately four months can result in approx. 50% less water evaporation.
This means you have to add fresh water to the pool less frequently.
Keeps leaves and other coarse debris out
The GRE summer cover does not just help with heat retention.
When the pool is not covered, leaves, insects, twigs, and other debris can end up directly in the water. Some of this is removed by the skimmer, while other debris sinks to the bottom.
With the summer cover, a large portion of this debris remains on top of the cover.
This helps to keep the pool water cleaner and can reduce the load on the skimmer and filter system.
Isothermal effect
The GRE CPROV730 is an isothermal cover. The material is designed so that it floats directly on the pool water.
The air structure within the cover provides the insulating effect. This shields the water surface from the outside air, reducing both heat loss and evaporation.
The cover must be placed correctly on the water to take full advantage of this effect.
Made of polyethylene
GRE manufactures this series of summer covers from polyethylene.
This material is light, flexible, and therefore practical for regular use during the swimming season. You can easily roll the cover over the water surface and remove it again when you want to swim.
The blue color also matches the look of the pool water nicely.
Floats directly on the water
No cables, elastic bands, or other attachment materials are needed for this summer cover.
You simply lay the cover directly on the pool water. It then stays floating on the water surface.
When you want to swim, you remove the cover completely from the pool. After use, it can be placed over the water again.
Easier to use with a reel system
Due to the large pool size of 730 x 375 cm, this is a fairly large cover.
The cover can be placed and removed manually, but for regular use, a suitable reel system for pool covers can make using it considerably easier.
This allows you to roll up the cover more evenly and store it compactly next to the pool.
Summer cover and winter cover are not the same
It is important to distinguish between a summer and winter cover.
This GRE CPROV730 summer cover floats on the pool water and is intended to retain heat, reduce evaporation, and keep out coarse debris during the swimming season.
A winter cover, on the other hand, is placed over the pool structure and securely fastened around the pool. This type is intended to cover the pool during a longer winter period.
The CPROV730 summer cover is therefore not intended as a replacement for a GRE winter cover.
What is included?
You will receive:
GRE isothermal summer cover
Oval version
Suitable for pool size 730 x 375 cm
Reference CPROV730
The cover is placed directly onto the pool water. Therefore, no attachment cables or tensioners are necessary.
Protect your large oval swimming pool optimally during the winter with the GRE Winter Cover Oval 820 x 460 cm. This winter cover has been specially developed for oval steel swimming pools of 730 x 375 cm, including GRE Ovalada models with this pool size.
With a total cover size of 820 x 460 cm, the cover falls well over the edges of the pool. This allows it to be securely fastened around the pool structure and better protects the water against leaves, insects, twigs, and other debris.
The winter cover is made of 120 g/m² polyethylene and comes complete with a plastic-coated steel cable and adjustable tensioner for attachment.
Specifically for oval swimming pools of 730 x 375 cm
This GRE winter cover is intended for oval steel above-ground pools with a pool size of:
730 x 375 cm
The cover itself has a larger dimension of:
820 x 460 cm
This extra length and width ensure that the cover falls sufficiently over the pool wall to be able to secure it properly around the pool.
This makes the cover, among other things, a suitable winter cover for the GRE Ovalada Oval Steel Swimming Pool - 730 cm x 375 cm x 132 cm.
Keep leaves and other debris out of the pool
A swimming pool that remains completely open during the autumn and winter can become quite dirty in a short time. Leaves, insects, twigs, and other organic material end up in the water and eventually sink to the bottom.
With the GRE winter cover, you largely close off the top of the pool.
This prevents a significant amount of debris from entering the pool and keeps the water better protected during the winter. This can save a lot of cleaning work when restarting the pool in the spring.
Sturdy 120 g/m² polyethylene
The cover is manufactured from polyethylene and has a material weight of 120 g/m².
This material combines sturdiness with a relatively low weight. This is especially important for a large cover of 820 x 460 cm, as the cover must remain manageable when being placed and removed.
The black color provides a neutral and calm appearance when the pool is covered during the winter.
Ideal for overwintering your swimming pool
The main purpose of this GRE cover is to protect the pool during the winter period.
After winterizing the pool, the cover is placed over the pool and secured around the structure. This keeps the pool better protected against pollution and weather conditions during the months in which it is not used.
The winter cover is one part of winterizing the pool. Also consider the correct preparation of the filter system, pipes, skimmer, and water treatment.
Up to approximately 95% less water evaporation
A cover can also be used outside the winter period when the pool is not used for longer periods of time.
GRE indicates that using a winter cover during the rest of the year can reduce the evaporation of pool water by up to approximately 95%.
How much water you actually save depends on factors including the outside temperature, wind, humidity, and the way the pool is covered.
Helps limit heat loss
A covered pool loses heat less quickly at night than a completely open pool.
The winter cover forms an extra barrier between the pool water and the outside air. This can help to limit temperature fluctuations and heat loss during the night.
Please note that this product is a winter cover and not a special thermal summer cover or solar cover.
Central water drainage
The GRE winter cover is equipped with a water drainage in the middle of the cover.
This feature helps drain rainwater and reduces the amount of water that can collect on top of the cover for long periods.
It remains important to check the cover regularly during the winter. Especially after heavy rain, storms, or snowfall, it is wise to check whether the cover is still positioned correctly and is securely fastened.
Includes plastic-coated steel cable
A plastic-coated steel cable is included for attachment.
The cable is used around the pool to secure the winter cover firmly. The plastic protection of the cable limits direct contact between bare steel and the pool structure.
Includes adjustable tensioner
In addition to the steel cable, an adjustable tensioner is also included.
This allows the cable around the pool to be tightened so that the cover stays neatly in place.
Good attachment is especially important for a cover of this size. A large surface area can catch a lot of wind if the cover is not mounted correctly.
Less maintenance at the start of the swimming season
One of the biggest advantages you will notice when spring arrives.
When a pool stands outside uncovered for months, a thick layer of leaves and other debris can collect on the bottom. That means vacuuming, scooping, filtering, and often intensive water treatment before the pool can be used again.
A winter cover helps to significantly reduce this pollution.
This makes it easier to prepare the pool for the swimming season again in the spring.
What is included?
With the GRE winter cover you receive:
GRE oval winter cover 820 x 460 cm
Plastic-coated steel cable
Adjustable tensioner for attachment
This gives you all the essential components to secure the cover around the pool immediately.
Enjoy a generous swimming pool in your own garden with the Gre Ovalada Oval Steel Pool - 730 cm x 375 cm x 132 cm. This large oval pool from the GRE Anthracite series combines a sturdy steel construction with a modern anthracite gray finish, a spacious swimming area, and a very comprehensive standard equipment package.
With a water capacity of no less than 28,210 liters and a swimming surface of approximately 24.12 m², this model is ideal for families who want plenty of space for swimming, playing, and relaxing.
A significant advantage of this version is the special Omega system with buried support beams. This eliminates the need for large protruding side supports. As a result, the pool takes up considerably less space around the perimeter while maintaining a sleek appearance.
The set is supplied complete with, among other things, a 6 m³/h sand filter system, approximately 40 kg of filter sand, 40/100 liner, skimmer, safety ladder, protective ground cloth, and connection hoses.
Extra large oval pool
With a commercial size of 730 x 375 x 132 cm, this Gre Ovalada belongs to the larger steel above-ground pools.
The actual internal dimensions are approximately:
720 x 375 x 130 cm
The external dimensions of the construction are approximately:
744 x 400 x 132 cm
This provides a long swimming zone of over 7 meters. This makes this version not only suitable for playing and relaxing, but also attractive for those who actually want to swim laps or longer distances in the pool.
For the complete installation, GRE advises accounting for a required space of approximately 770 x 495 cm.
No less than 28,210 liters of water
The Gre Ovalada has a water capacity of approximately 28.21 m³, or about 28,210 liters.
The swimming surface is approximately 24.12 m² and the waterline is at a height of approximately 117 cm.
This gives you a full-fledged family pool with significantly more swimming space than the smaller 610 x 375 cm Ovalada version.
Modern anthracite gray steel outer wall
The outer wall has a stylish anthracite gray finish. This gives the pool a modern look that fits perfectly in contemporary gardens.
The steel pool wall has a thickness of approximately 45/100. The pool construction and profiles are manufactured from steel, and the design is intended to safely contain the large volume of water when the pool is installed correctly.
The connections between the horizontal profiles are also finished with protective covers for a neat appearance.
Omega system with buried support beams
One of the greatest advantages of this model is the special support system.
Many large oval steel pools require bulky metal side supports. These protrude far outwards on both long sides, significantly increasing the required installation space.
The Gre Ovalada KITPROV7388GY uses a system with buried support beams. As a result, the traditional large side supports are not needed.
The result is a sleeker pool and a significantly more compact installation.
For comparison: GRE also has a 730 x 375 cm version with side supports. That requires approximately 770 x 595 cm of installation space, whereas this version with buried beams needs about 770 x 495 cm.
Blue 40/100 pool liner
The interior is finished with a blue PVC liner with a thickness of 40/100.
The liner is treated with an anti-UV coating, making it more resistant to prolonged exposure to sunlight.
The blue interior also provides the familiar fresh blue appearance of the pool water.
For a long lifespan of the liner, it is important that the ground is completely flat, clean, and free of sharp objects.
Includes 6 m³/h sand filter system
A complete sand filter system with a capacity of 6 m³ per hour is included for filtration.
The pool water is drawn in through the skimmer and then passed through the filter medium. Dirt particles are trapped in the sand, after which the filtered water flows back into the pool.
The filter tank has a diameter of approximately 400 mm and the system has a power output of approximately 230 watts.
Approximately 40 kg of filter sand included
Approximately 40 kg of silica sand is included with the sand filter. The prescribed filter sand has a grain size of approximately 0.4 to 0.8 mm.
This means you do not need to immediately purchase separate filter sand to start using the included system.
Skimmer included
A skimmer set is also part of the standard equipment.
The skimmer draws in surface water and helps remove leaves, insects, and other floating debris from the pool before they can sink to the bottom.
Through the skimmer, the water is led to the sand filter and subsequently returned to the pool once filtered.
Safety ladder with removable steps
For a pool that is 132 cm high, a good pool ladder is essential. That is why this Ovalada is supplied with a safety ladder with a platform and 6 steps.
The ladder has three steps on each side. The steps on the outside can be removed when the pool is not in use.
This can restrict access for small children. Naturally, proper supervision around a pool always remains necessary.
Protective ground cloth included
A polyethylene protective cloth of approximately 200 g/m² is placed under the pool.
The included ground cloth measures approximately 7.5 x 4 meters and forms an additional protective layer between the ground and the pool construction.
The ground cloth is not a substitute for a well-prepared surface. The ground must be completely flat, firm, stable, and free of sharp objects.
Complete pool set
The Gre Ovalada is supplied as a very complete set. You therefore do not need to look for all the essential components separately to install the pool.
In addition to the steel pool construction, you immediately receive the liner, sand filter system, filter sand, skimmer, safety ladder, protective ground cloth, and connection hoses.
Installation
Due to its size and the system with buried support beams, assembly requires more preparation than a simple frame pool.
GRE estimates an assembly time for this version of approximately 8 hours with 2 to 3 people.
Preparation of the ground, excavation work for the support beams, filling the pool, and further technical installation may be additional to this.
A concrete floor slab is indicated by GRE as optional. However, a completely flat, stable, and sufficiently load-bearing surface is necessary.
The water in the pool alone weighs over 28 tons. A correct preparation of the surface is therefore essential.
What is included?
With the Gre Ovalada 730 x 375 x 132 cm, you receive the anthracite gray steel pool construction, blue 40/100 liner, Omega support system with buried beams, 6 m³/h sand filter system, approximately 40 kg of silica sand, skimmer set, connection hoses, polyethylene ground cloth, and safety ladder with platform and 6 steps.
This gives you an immediately very complete foundation for a large, permanent above-ground pool.
Keep your Intex pool water clean and clear with the Intex C900 filter pump – 3,407 liters/hour. This powerful cartridge filter pump is an excellent choice for medium-sized Intex above-ground pools and ensures that the pool water is continuously circulated and filtered.
With a pump capacity of no less than 3,407 liters per hour, the C900 offers significantly more capacity than smaller cartridge filter pumps. This makes this filter pump suitable for, among others, larger Easy Set, Frame, and Prism Frame pools.
Powerful filtration with 3,407 liters per hour
The Intex C900 has a pump capacity of 3,407 liters per hour. The pool water is led to the filter pump via the intake hose and then flows through the filter cartridge.
Hair, insects, dust, and other debris are captured by the filter material. The filtered water is then pumped back into the pool.
Proper water circulation is not only important for clear water, but also ensures that pool chemicals are better distributed throughout the pool.
Cartridge filtration for easy maintenance
The C900 uses a replaceable filter cartridge. The pleated filter material has a large surface area and is designed to capture dirt from the circulating pool water.
Maintenance is simple. Regularly remove the cartridge from the filter housing and carefully rinse the dirt from between the pleats. When the cartridge eventually becomes heavily soiled, damaged, or worn out, simply replace it with a new one.
It is wise to always keep an extra filter cartridge in stock. This allows the pump to keep running while the other cartridge is being cleaned and dried.
Suitable for various Intex pools
The Intex C900 is suitable for various pools from the Easy Set, Frame, and Prism Frame series, among others.
The pump is used for, among others:
Intex Easy Set: Ø 457 cmIntex Frame: Ø 427 cm and Ø 457 cmIntex Prism Frame rectangular: 488 x 244 cm
When replacing, always check whether the capacity and connections match your current pool installation.
12-volt filter pump
The filter pump itself operates on 12 volts. The low-voltage pump is powered via the dedicated transformer provided.
In addition, the pump is double-insulated. Always follow the Intex safety and installation instructions when positioning and electrically connecting the filter pump.
Air release valve
Air can remain trapped in the filter chamber during filling or after maintenance. For this reason, the C900 is equipped with an air release valve.
This allows trapped air to escape from the filter chamber before the pump is put into normal operation. A properly filled and bled system is important for good water circulation.
Easy to install
The Intex C900 has been developed with ease of use in mind. The filter pump is connected to the intake and return connections of the pool using hoses.
After connecting the hoses, allow the filter housing to fill with water, bleed the system, and the filtration can be started.
For proper operation, it is important to place the filter pump according to the installation instructions and never let it run dry.
Reliable filtration for your Intex pool
With the Intex C900 filter pump – 3,407 liters/hour, you are choosing a powerful yet user-friendly cartridge filter pump. The combination of a 3,407 liters per hour capacity, an easy-to-maintain filter cartridge, 12V pump, double-insulated construction, and air release valve makes this filter pump ideal for various medium-sized Intex above-ground pools.
Keep your pool water clean and clear with the Intex C600 filter pump. This compact cartridge filter pump has a pump capacity of 2,271 liters per hour and is a practical solution for smaller to medium-sized Intex pools.
The pump combines water circulation with filtration. The pool water is drawn in, passed through an Intex Type A filter cartridge, and then pumped back into the pool. Dirt particles remain trapped in the cartridge. The pump has an effective system flow rate of approximately 1,893 liters per hour.
2,271 liters per hour pump capacity
The C600 has a maximum water flow rate of 2,271 liters per hour. When accounting for resistance from the filter cartridge and hoses, the actual system flow rate is approximately 1,893 liters per hour.
This makes the C600 a great mid-range cartridge filter pump for above-ground pools where a smaller filter pump provides insufficient capacity, but a large sand filter system is not necessary.
Works with Intex Type A filter cartridges
The C600 uses the widely used Intex Type A filter cartridge. The pleated cartridge traps dirt particles as the water circulates through the pump.
A major advantage of a cartridge filter is its simple maintenance. Remove the cartridge from the housing and rinse it thoroughly with water regularly. When the cartridge is heavily soiled or worn, it can be easily replaced.
For intensive use, it is useful to always have one or more spare filters on hand.
Safe 12V version
This version of the Intex C600 operates on 12 volts and is used in combination with a transformer. The transformer converts the mains voltage to the low voltage the pump uses.
The pump is also double-insulated.
32 mm hose connections
The Intex C600 features 32 mm connections. This allows you to easily connect the pump to many Intex above-ground pools that also use 32 mm pool hoses.
Pay close attention to this when purchasing the C600 as a replacement filter pump. If your pool has standard 38 mm connections, this pump will not fit directly without suitable adapters.
Air release valve for easy commissioning
On top of the filter chamber is an air release valve. This allows you to release air that has become trapped in the filter housing.
Let the hoses and filter pump fill with water first and bleed the system before running the pump. Proper venting is important for good water circulation.
Suitable for various Intex pools
The C600 can be used with various Intex Easy Set, Metal Frame, and Rectangular Prism Frame pools with the correct 32 mm connections.
Intex/retailers mention, among others, Easy Set models up to Ø 457 cm, Metal Frame Ø 366 cm, and rectangular Prism Frame models up to approximately 400 cm.
However, when replacing an existing pump, do not only look at the outer dimensions of the pool. Also check the water volume, desired turnover rate, and connection diameter.
The capacity, connection, Type A cartridge, and power consumption of approximately 45 W are confirmed by multiple product specifications.
What is included?
Depending on the exact version, the C600 is supplied as a complete set with the filter pump, 12V transformer, two 32 mm pool hoses of approximately 150 cm, connection materials, and an Intex Type A filter cartridge.
Simple filtration for clear pool water
The Intex C600 Filter Pump – 2,271 liters/hour is an excellent choice if you are looking for a compact and user-friendly filtration solution for an Intex above-ground pool. Thanks to the 12V power supply, 32 mm connections, Type A filter cartridge, and pump capacity of 2,271 liters per hour, you have everything you need to circulate and filter the pool water daily.
Enjoy an authentic wellness moment in your own garden with the Hilda Wood-Fired Hot Tub – 4 Persons. This stylish hot tub combines the natural look of thermally treated wood with the comfort of a modern hot tub and the powerful heat of a 35 kW wood-burning stove.
The Hilda is designed for a maximum of 4 people and features a distinct, contemporary design. This makes it particularly suitable for those looking for a hot tub that is not only comfortable but also truly becomes part of the aesthetics of the garden or patio.
Authentic heating with a 35 kW wood-burning stove
The heart of the Hilda is the powerful 35 kW wood-burning stove. With this, you heat the water in the traditional way using firewood. You are therefore not dependent on heavy-duty electric heating for your primary heat source.
A wood-fired hot tub also provides a special atmosphere. Lighting the fire, the crackling wood, and eventually the warm water are all part of the experience.
How quickly the water reaches temperature depends on factors such as the volume of water, the starting temperature, ambient temperature, quality of the firewood, and the use of an insulating cover. For similar Oskar hot tubs with a 35 kW wood stove, a heating time of approximately 1.5 to 2.5 hours is cited under favorable conditions.
Space for 4 people
The Hilda accommodates up to 4 people, making it a great choice for couples, families, and smaller groups.
Thanks to its compact design, the hot tub takes up less space than many larger round models designed for six or eight people. This makes the Hilda an attractive option for both a spacious garden and a smaller patio where you still want to create a full-fledged wellness area.
Thermally treated pine cladding
An important part of the Hilda's appearance is the thermally treated pine cladding.
Thermally treated wood perfectly complements the Scandinavian character of a wood-fired hot tub. The warm wood tones provide a natural and high-quality look that can be easily combined with, for example, a wooden deck, natural stone, or modern garden architecture.
Integrated LED lighting
Even when it gets dark, you can fully enjoy the Hilda. The integrated LED lighting provides extra ambiance in and around the hot tub in the evening.
Especially during a cold autumn or winter evening, the combination of warm water, wood fire, and atmospheric lighting really comes into its own.
Fans for an enhanced wellness experience
In addition to the wood-fired heating and lighting, the Hilda features fans for a more extensive wellness experience. This sets this model apart from a simple, traditional wooden tub.
In this way, the Hilda combines the character of a Scandinavian hot tub with extra modern wellness functions.
Wood-fired and expandable
Those who use the hot tub regularly may want to consider additional heating and insulation solutions. For wood-fired hot tubs, for example, a good thermal cover can significantly help to limit heat loss.
Hot tub systems can also be expanded with features such as filtration. For various models, Oskar offers sand filter systems, UV support, and insulation as additional options.
Ideal for different seasons
A hot tub is not just intended for warm summer evenings. A wood-fired hot tub becomes especially pleasant precisely when the outside temperature drops.
In the autumn, you can enjoy warm water outside while the temperature cools down, while a winter hot tub session provides the characteristic contrast between the cold outside air and lovely warm water.
A good insulating cover is highly recommended for this. It helps retain heat longer and simultaneously prevents leaves and other debris from easily falling into the water.
Enjoy warm water, the crackling sound of a wood fire, and pure relaxation in your own garden with the Wood-Fired Hot Tub External Oskar – 6 persons. This round hot tub combines the authentic look of a Scandinavian tub with the comfort of a modern, low-maintenance basin.
The major advantage of this version is the external wood stove. The stove is located outside the hot tub, meaning no valuable seating space is lost inside the basin. This leaves plenty of room to comfortably enjoy the warm water with up to 6 people.
With an outer diameter of approximately 201 cm and an inner diameter of about 180 cm, the Oskar is spacious enough for a family or a cozy wellness evening with friends. Authentic wood-fired heating
A wood-fired hot tub offers a completely different experience compared to a traditional electric whirlpool. You build the fire yourself and use its heat to bring the pool water to temperature.
The warm water circulates between the hot tub and the external wood stove. This allows the water to be heated gradually without requiring a heavy electric heater for the main heating.
The exact heating time depends on factors such as the outside temperature, the starting temperature of the water, the volume of water, the quality and moisture content of the firewood, and the use of insulation and a thermal cover. For similar Oskar models, a heating time of approximately 1.5 to 2.5 hours is cited under favorable conditions.
External wood stove for maximum space
In this version, the wood stove is located next to the hot tub. This offers several advantages.
The most important benefit is the available space in the tub. Because no stove is built into the basin, the interior space remains fully available for the users.
In addition, the stove is easily accessible for adding firewood and for maintenance.
Depending on the chosen version, the external stove can be made of AISI 304 stainless steel. For situations where salt water is used, it is important to specifically choose a suitable version, such as AISI 316, if this option is offered for the model.
Room for up to 6 people
With an outer diameter of about 201 cm and an inner diameter of approximately 180 cm, this round hot tub offers plenty of space for multiple people.
The round shape ensures that everyone can sit comfortably facing each other. This makes the Oskar suitable for both families and couples who enjoy having extra space or want to enjoy the hot tub together with friends.
The actual comfortable capacity also depends on the height and build of the users.
Low-maintenance acrylic inner basin
The Oskar combines the look of a traditional hot tub with a modern acrylic inner basin.
The smooth surface feels comfortable and is significantly easier to keep clean than the interior of a fully wooden tub. Dirt cannot adhere to a smooth surface as easily, and the basin can be cleaned simply after use.
Furthermore, the seats are integrated into the basin, so you do not need loose wooden benches in the water.
Various configurations possible
An important advantage of the Oskar is that the hot tub can be further upgraded. Depending on the selected configuration, various exterior finishes, acrylic basin colors, and additional wellness features are possible.
For instance, you can expand the traditional wood-fired hot tub with features such as hydromassage, air massage, LED lighting, a filter system, or thermal insulation.
This allows you to decide for yourself whether you opt for a relatively simple Scandinavian hot tub or want to create a more extensive wellness installation.
Suitable for use in different seasons
A wood-fired hot tub really comes into its own during lower outside temperatures. On a crisp autumn or winter evening, the contrast between the cold outside air and the warm water is especially pleasant.
For regular use, good insulation is important. An insulating cover limits heat loss through the water surface and helps keep the water warm for longer.
Insulation around the basin can also be worth considering if the hot tub is used intensively or throughout a large part of the year.
Sturdy and level surface required
A filled hot tub contains a large volume of water, plus the weight of up to six users. Therefore, always place the Oskar on a completely flat, stable, and sufficiently load-bearing surface.
A suitable concrete foundation or a properly constructed and load-bearing terrace can be used for this. When determining the required space, also keep the external wood stove, smoke exhaust, connections, and sufficient safe workspace around the installation in mind.
Make every sauna session different with the W'eau Sauna Fragrance Pack – 6 x 250 ml. With six different aromas, you will always have a fragrance to suit the mood of the moment. From fresh and invigorating to soft, spicy, and relaxing: with this complete pack, you can bring an extensive collection of W'eau sauna fragrances into your home all at once.
The fragrance pack is ideal for anyone who likes to alternate between different aromas and does not want to use the same scent every time. The pack also makes a great gift for fans of saunas, wellness, and relaxation.
Six different fragrances in one pack
With six bottles of 250 ml each, you have a total of no less than 1.5 liters of different fragrances. This allows you to choose the aroma that best suits your mood for each sauna session.
The various fragrances each provide their own character. For example, choose a fresh scent during an invigorating sauna session or a softer and warmer aroma when relaxation is the priority.
By alternating regularly, every sauna session remains surprising, and you can create different wellness atmospheres at home.
For a complete wellness experience
Heat is, of course, the most important part of a sauna, but fragrance can add a lot to the total experience. A pleasant aroma spreads through the warm cabin and ensures that your sauna moment becomes even more atmospheric.
With the W'eau fragrance pack, you don't have to choose one favorite scent in advance. You can try out different aromas and discover which fragrance suits you best.
This makes the pack also interesting when multiple people use the same sauna and each has a different fragrance preference.
Ideal as a gift
The W'eau Sauna Fragrance Pack is not only fun to use yourself. Due to the combination of different aromas, it is also an original gift for someone with their own sauna.
For example, combine the pack with other sauna accessories to put together a complete wellness gift.
Easy to use
Always use the W'eau fragrances according to the instructions on the packaging and adhere to the recommended dosage. When used as a sauna infusion fragrance, a suitable concentrate is first mixed with the infusion water.
Never use a concentrated sauna fragrance undiluted directly on hot sauna stones or the sauna heater.
Discover your favorite W'eau sauna fragrance
With the W'eau Sauna Fragrance Pack – 6 x 250 ml, you bring plenty of variety to your own sauna. Instead of using the same aroma every time, you can alternate between different scents and adjust the atmosphere to the moment.
With six different 250 ml bottles and a total volume of 1.5 liters, it is an extensive pack for many atmospheric sauna moments. Ideal for discovering different W'eau fragrances yourself or to give as a gift to a true wellness enthusiast.
Create a wonderfully soothing atmosphere in your sauna with the W'eau Sauna Fragrance Lavender – 250 ml. The recognizable floral scent of lavender is perfect for a relaxing sauna session and gives your own sauna the pleasant scent experience you know from a wellness center.
Lavender has a soft, floral, and aromatic scent character. While eucalyptus and rosemary smell particularly fresh and powerful, lavender is an excellent choice if you are looking for a softer and more relaxed atmosphere while using the sauna.
Soft and floral lavender scent
With W'eau Lavender, you can easily add an extra sensory experience to your sauna moment. The warm environment of the sauna ensures that the aroma spreads pleasantly throughout the cabin.
The floral scent fits perfectly with a quiet wellness moment. This makes this variant wonderful during an evening sauna session, for example, or whenever you simply want to enjoy warmth and a pleasant fragrance.
Ideal for sauna infusions
The W'eau Sauna Fragrance Lavender is suitable for use during sauna infusions. To do this, mix the recommended amount of sauna fragrance with the infusion water.
When you distribute the diluted mixture over the hot sauna stones, steam is created, allowing the lavender aroma to spread throughout the sauna cabin. This combines heat, steam, and fragrance into one complete sauna experience.
Always start with the recommended dosage and adjust the intensity within the usage instructions to your personal preference.
Never use concentrated sauna fragrance undiluted directly on the hot sauna stones or sauna heater. Always follow the usage and safety instructions on the packaging.
250 ml for multiple sauna sessions
The W'eau Lavender comes in a compact bottle with a capacity of 250 ml. Because the sauna fragrance is used diluted, you only need a limited amount per infusion.
This allows you to use one bottle for multiple sauna sessions. Moreover, you can easily alternate Lavender with other W'eau sauna fragrances to give every sauna session a different character.
Wonderfully relaxing with the scent of lavender
The W'eau Sauna Fragrance Lavender – 250 ml is a wonderful choice for anyone who loves a soft and floral scent experience while using the sauna. The recognizable lavender aroma combines excellently with the heat and steam of a sauna and creates a pleasant wellness atmosphere.
Perfect for a quiet sauna moment at home and a great addition to your collection of W'eau sauna fragrances.
Bring the special atmosphere of a traditional steam bath to your own wellness space with the W'eau Sauna Scent Hammam – 250 ml. This fragrance has a characteristic wellness aroma that perfectly complements a relaxing sauna or hammam session.
The Hammam scent provides a fresh, aromatic, and pleasant fragrance experience. Ideal when you want to escape the daily hustle and bustle and create the atmosphere of a luxury spa or wellness center at home.
The atmosphere of a traditional hammam
A hammam is known for warmth, steam, tranquility, and wonderful aromas. With W'eau Hammam, you can easily add this typical fragrance experience to your own wellness moment.
The combination of warmth and fragrance creates a pleasant atmosphere where relaxation is central. The Hammam variant is therefore a great alternative to classic sauna aromas such as eucalyptus, rosemary, and forest scents.
Wonderful during a wellness moment
The W'eau Hammam sauna scent has been developed to add extra fragrance and atmosphere to your wellness moment. By using the aroma as directed, the scent spreads pleasantly throughout the warm room.
The fragrance is suitable for those who love a recognizable wellness atmosphere and enjoy alternating between different aromas. For instance, you can choose fresh eucalyptus one time and the warmer, special atmosphere of Hammam for your next session.
Always follow the instructions on the packaging for the correct dosage and application.
250 ml content
The bottle contains 250 ml and, thanks to its compact size, is easy to store with your other sauna and wellness products.
Because only a limited amount is needed to create a pleasant fragrance experience, you can use the bottle for multiple wellness moments. Always adhere to the recommended dosage.
Bring the hammam feeling home
With the W'eau Sauna Scent Hammam – 250 ml, you give your sauna or wellness moment a special fragrance experience. The fresh and aromatic character creates a pleasant atmosphere and forms a wonderful change from traditional sauna aromas.
An excellent choice for anyone who wants to enjoy the warm, aromatic, and relaxed atmosphere of a hammam at home.
Create a warm and atmospheric wellness experience with the W'eau Oriental Sauna Scent – 250 ml. This sauna scent gives your sauna a pleasant oriental and aromatic character and is ideal for those who want something different during a sauna session than traditional fresh scents like eucalyptus or rosemary.
The Oriental scent really comes into its own when combined with the heat and steam during a sauna infusion. The aroma spreads through the cabin, contributing to a pleasant, luxurious atmosphere. This way, you can easily turn an ordinary sauna session into a complete wellness moment.
Warm and oriental scent experience
While fresh sauna aromas mainly have an invigorating character, W'eau Oriental is all about warmth, atmosphere, and a richer scent experience. Its aromatic character is an excellent match for a quiet sauna session focused on relaxation.
This makes Oriental a great choice for the evening, during cold winter days, or when you want to create the atmosphere of a luxury wellness center at home.
Ideal for sauna infusions
The W'eau Oriental Sauna Scent is intended for use during sauna infusions. Mix the recommended amount of sauna scent with the infusion water and then use the diluted mixture during your sauna session.
When the infusion water is poured over the hot sauna stones, steam is created that spreads the aroma throughout the cabin. This makes the scent part of the full sauna experience.
Always start with the recommended dosage so you can experience which scent intensity is most pleasant for you.
Always use the sauna scent according to the instructions on the packaging. Do not pour the concentrated product undiluted directly onto hot sauna stones or the sauna heater.
250 ml for multiple sauna sessions
The bottle contains 250 ml of sauna scent. Because the product is used diluted with infusion water, only a small amount is needed per sauna session.
The compact bottle is easy to store and ideal for using alongside various other W'eau sauna scents. This allows you to decide which atmosphere you want to create for each sauna moment.
A touch of Oriental wellness in your own sauna
With the W'eau Oriental Sauna Scent – 250 ml, you give every sauna session a warm and special scent experience. The aromatic, oriental character forms a delicious combination with the heat of the sauna and helps create a pleasant wellness atmosphere.
An excellent choice for anyone who loves a warm, atmospheric, and luxurious sauna experience and likes to alternate between different sauna aromas.
Give your sauna session a fresh, herbal, and aromatic fragrance experience with W'eau Rosemary Sauna Fragrance – 250 ml. The characteristic scent of rosemary creates a pleasant wellness atmosphere and is ideal for anyone who enjoys fresh and herbal aromas while in the sauna.
Rosemary has a distinct, green, and herbal scent profile. Combined with the heat and steam of the sauna, it creates a wonderful aromatic experience that perfectly suits a traditional infusion (aufguss) moment.
Fresh and herbal rosemary scent
With W'eau Rosemary, you can easily add extra atmosphere to your sauna. The scent has a distinctly herbal character, making it a great alternative to classic sauna fragrances like eucalyptus.
During the infusion, the aroma spreads throughout the sauna cabin along with the hot steam. This makes not only the heat but also the scent a part of your complete sauna experience.
Ideal for a refreshing sauna session after a busy day, after exercising, or simply during a relaxing wellness moment at home.
Ideal for sauna infusions
The W'eau Rosemary Sauna Fragrance is designed to create a pleasant scent during sauna infusions. Simply mix the recommended amount of sauna fragrance with the infusion water.
Then, use the diluted mixture to pour over the sauna stones. The heat causes the water to evaporate, spreading the rosemary scent throughout the cabin.
This allows you to decide for yourself how intense you want the fragrance to be during your sauna session, within the recommended dosage.
Always use the sauna fragrance according to the instructions on the packaging. Do not pour the concentrated product undiluted directly onto hot sauna stones or the sauna heater.
250 ml for multiple sauna moments
The bottle has a capacity of 250 ml. Because sauna fragrance is used diluted with water, you only need a small amount per infusion.
This allows you to use one bottle for multiple sauna sessions. The compact packaging is also easy to store with your other sauna accessories.
You can also combine Rosemary with other W'eau sauna fragrances, allowing you to choose between, for example, a fresh, herbal, woody, or other fragrance experience depending on the moment.
Enjoy a herbal wellness moment
With W'eau Rosemary Sauna Fragrance – 250 ml, you can easily add a deliciously fresh and herbal aroma to your sauna session. The characteristic scent of rosemary combines excellently with the heat and steam during an infusion.
An excellent choice for anyone who wants to enjoy a fresh, aromatic, and atmospheric sauna experience at home.
Bring the soothing atmosphere of a fresh forest into your own sauna with the W'eau Sauna Fragrance Misty Forest – 250 ml. This sauna fragrance ensures a pleasant, natural scent experience and turns every sauna session into a relaxing wellness moment.
Misty Forest is inspired by the scent and atmosphere of a fresh, misty forest. The woody character goes perfectly with the heat of a sauna and is a great choice for anyone who loves natural, fresh aromas.
Bring the atmosphere of the forest into your sauna
Fragrance has a significant impact on the atmosphere during a sauna session. With W'eau Misty Forest, you can easily add an extra dimension to your infusion moment.
When the diluted sauna fragrance is used during an infusion, the aroma spreads through the sauna cabin along with the hot steam. This creates a pleasant wellness environment in which you can relax wonderfully.
The natural character of Misty Forest also makes this variety suitable for both short and long sauna sessions.
Ideal for sauna infusions
The W'eau Misty Forest sauna fragrance is intended for use during sauna infusions. Mix the recommended amount of fragrance with the infusion water and then use the mixture during the sauna session.
This allows you to decide for yourself how intense you want the scent to be, within the recommended dosage.
Always use the product according to the instructions on the packaging. Do not use concentrated sauna fragrance undiluted directly on hot sauna stones or the sauna heater.
250 ml content
The bottle contains 250 ml of sauna fragrance. Because the fragrance is used diluted, only a limited amount is needed per infusion.
The compact bottle is also easy to store among your other sauna accessories. If desired, combine Misty Forest with other W'eau sauna fragrances to be able to change scent and atmosphere regularly.
A natural wellness experience
With the W'eau Sauna Fragrance Misty Forest – 250 ml, you can easily turn an ordinary sauna session into an atmospheric wellness moment. The fresh, woody scent combines perfectly with the heat and steam of a sauna, giving you the feeling of briefly escaping the daily grind.
A delicious choice for anyone who enjoys fresh, natural, and woody scents while in the sauna.
Bring the fresh and familiar scent of eucalyptus to your own sauna with W'eau Sauna Scent Eucalyptus – 250 ml. The powerful, fresh aroma is a perfect match for a warm sauna session and creates a pleasant wellness experience where heat and aroma come together.
Eucalyptus is a true classic in saunas and wellness centers. The fresh, herbal aroma provides an invigorating feeling during the infusion and forms a beautiful contrast to the intense heat in the sauna cabin. Ideal if you want to create the atmosphere of a professional sauna at home.
A fresh eucalyptus experience in your sauna
During a sauna session, scent plays an important role in the overall experience. As soon as the diluted W'eau Eucalyptus sauna scent is used with the infusion water, the aroma spreads throughout the cabin along with the warm steam.
The typical eucalyptus scent is fresh, powerful, and herbal. This makes this variety particularly suitable for those who prefer a distinct and refreshing scent rather than a sweet aroma.
Use the scent during a relaxing sauna moment after exercise, at the end of a busy day, or simply whenever you want to turn your sauna into a complete wellness experience.
Ideal for sauna infusions
The W'eau Eucalyptus sauna scent is intended to be used in combination with infusion water. You mix the recommended amount of scent concentrate with water and then use this for the sauna infusion.
When the diluted infusion water is applied to the hot sauna stones, steam is created and the eucalyptus aroma spreads through the cabin.
By adjusting the intensity based on the amount of water, you can determine yourself how strong you want the scent to be during the sauna session.
Always use the product according to the dosage and safety instructions on the packaging. Never use concentrated sauna scent undiluted directly on the hot sauna heater or sauna stones.
Eucalyptus: a true wellness classic
It is not without reason that eucalyptus is one of the most popular sauna aromas. While lavender, for example, has a particularly soft and soothing scent, eucalyptus provides a much fresher and more distinct sensory experience.
The scent is therefore an excellent match for:
Traditional sauna infusions
Relaxing wellness moments
Use after exercise
Warm sauna evenings in the winter
Anyone who loves fresh and herbal aromas
By alternating eucalyptus with other W'eau sauna scents, you can also give every sauna session a different atmosphere.
Compact 250 ml bottle
The 250 ml packaging is compact and easy to store with your other sauna accessories. Because sauna aromas are used diluted, you only need a small amount per infusion.
This makes the bottle suitable for multiple sauna sessions, allowing you to experiment with the scent intensity within the indicated dosage.
Make every sauna session a wellness moment
With W'eau Sauna Scent – Eucalyptus – 250 ml, you can easily add a fresh and herbal fragrance experience to your sauna. The characteristic eucalyptus aroma combines excellently with the heat and steam of a traditional sauna infusion.
Whether you use your sauna regularly or only during special wellness moments: with W'eau Eucalyptus, you create that recognizable fresh sauna atmosphere at home. An excellent choice for fans of a powerful and invigorating aroma.
The W’eau HDPE-450 Top Mount sand filter 8 m³/h is a powerful and durable sand filter for efficiently filtering swimming pool water. With a 450 mm filter tank and a maximum flow rate of 8 m³ per hour, this sand filter offers sufficient capacity for medium-sized private swimming pools. The larger filter surface area ensures that pool water is effectively guided through the filter medium, removing dirt particles from the water.
The filter tank is manufactured from strong HDPE (High Density Polyethylene). This material is excellently suited for pool installations: it is sturdy, moisture-resistant, and cannot rust. In combination with the top-mounted 6-way valve, you get a compact and user-friendly filter solution that can be easily integrated into an existing or new pool installation.
Powerful filtration of 8 m³ per hour
With a maximum flow rate of 8 m³/h, the W’eau HDPE-450 can theoretically process approximately 8,000 liters of pool water per hour.
During the filtration process, the pool pump draws water from the swimming pool. The water is then pumped to the filter tank and guided through the filter medium. Dirt particles are trapped within the filter material, after which the filtered water flows back to the pool via the return line.
As a result, small impurities are continuously removed from the pool water. In combination with a proper water balance and correct disinfection, this contributes to clear and clean pool water.
450 mm filter tank for a larger filter surface area
The HDPE-450 features a filter tank with a diameter of 450 mm. Consequently, this version offers a larger filter surface area than, for example, the HDPE-350 and HDPE-400.
A larger filter tank means that more filter medium can be used. This allows more dirt to be trapped before the filter medium needs to be cleaned.
The HDPE-450 is therefore an attractive mid-size option for pool owners who want more filtration capacity without immediately choosing a very large sand filter.
Compact Top Mount design
The W’eau HDPE-450 is designed as a Top Mount sand filter. This means that the 6-way valve is placed directly on top of the filter tank.
An important advantage of this design is that the complete sand filter requires relatively little floor space. In a Side Mount version, the valve is located next to the filter tank, making the installation wider.
This makes the HDPE-450 easy to place in, for example, a technical room, shed, equipment box, or next to the pool.
When placing it, ensure there is sufficient free space above the sand filter for operating and maintaining the 6-way valve.
Multifunctional 6-way valve
With the integrated 6-way valve, you can easily control the various functions of the sand filter. This means you do not need to disconnect pipes for normal maintenance.
The different settings are:
Filter – the normal operating position where pool water flows through the filter medium.
Backwash – reverses the water flow through the filter bed so that accumulated dirt is flushed out via the drain.
Rinse – used after backwashing to properly re-settle the filter medium and discharge any remaining dirt.
Waste – discharges pool water directly to the drain without passing it through the filter medium.
Circulate – circulates the water through the system without filtration.
Closed – closes off the water flow through the valve.
Note: always switch off the pool pump completely before changing the setting of the 6-way valve.
Simple cleaning by backwashing
An important advantage of a sand filter is its simple maintenance. As the pool is used, more and more dirt collects in the filter medium. This increases resistance and can eventually reduce the flow rate.
Instead of opening the filter tank and cleaning the filter material manually, you simply use the Backwash function.
This temporarily reverses the water flow. The accumulated dirt is loosened from the filter bed and discharged via the waste water connection.
Afterward, you run the sand filter on Rinse for a short time and then return the 6-way valve to Filter.
Suitable for filter sand and filter glass
The W’eau HDPE-450 can be filled with various suitable filter media. The most commonly used options are filter sand and filter glass.
Filter sand is the traditional solution and is known for its simple operation and attractive price.
Filter glass is a popular alternative to sand. Depending on the filter glass used, it can offer fine filtration and generally has a long service life.
Always use the prescribed quantity and grain size for the HDPE-450. Too little, too much, or the wrong grain size can affect the filtration and flow rate.
Strong HDPE filter tank
The filter tank is manufactured from HDPE, or high-density polyethylene. This plastic combines a relatively low weight with a sturdy construction.
An important advantage is that HDPE cannot rust. This makes the material highly suitable for pool installations, where components are exposed to moisture and pool water for long periods.
The sturdy construction ensures the sand filter is suitable for years of seasonal use, provided the installation is correctly placed, maintained, and properly protected during the winter period.
Ideal for medium-sized pools
Thanks to its capacity of 8 m³/h, the HDPE-450 is primarily attractive for medium-sized private swimming pools.
Think, for example, of larger frame pools, steel-wall pools, wooden pools, and smaller to medium-sized permanent pools.
When choosing a sand filter, you should not only look at the maximum pool volume. Pipe length, pipe diameter, height differences, bends, heat pumps, and other accessories also cause resistance and can reduce the actual water flow rate.
Therefore, it is important to match the sand filter and pool pump as a single unit.
Combinable with a swimming pool heat pump
Do you want to use a pool heat pump in addition to filtration? Then the HDPE-450 can become part of a complete pool installation.
The normal sequence is, for example:
Swimming pool → pool pump → sand filter → bypass/heat pump → return to pool.
The sand filter is positioned before the heat pump so that the water is filtered first before flowing through the heat pump’s heat exchanger.
With a bypass, you can then set how much water is routed through the heat pump.
Powerful and reliable filtration for your pool
The W’eau HDPE-450 Top Mount sand filter 8 m³/h is an excellent choice when you are looking for a sturdy sand filter with sufficient capacity for a medium-sized pool. The 450 mm HDPE filter tank offers a spacious filter surface area, while the maximum flow rate of 8,000 liters per hour ensures powerful water circulation.
The combination of the durable HDPE filter tank, the compact Top Mount construction, and the multifunctional 6-way valve also makes the HDPE-450 easy to use and maintain. Thanks to the ability to use filter sand or filter glass, you can configure the installation according to your own preference.
A powerful, compact, and low-maintenance sand filter for those who want to enjoy clean and clear pool water throughout the entire swimming season.
The W’eau HDPE-400 Top Mount sand filter 6.5 m³/h is a powerful and low-maintenance sand filter for keeping small to medium-sized swimming pools clear and clean. With a filter diameter of 400 mm and a maximum flow rate of 6.5 m³ per hour, this model offers more capacity than the HDPE-350 and is ideal when you need just a bit more filtering power.
The filter tank is manufactured from strong HDPE (High Density Polyethylene). This material is excellently suited for pool installations as it does not rust and is highly resistant to moisture and normal weather conditions. In combination with the compact Top Mount 6-way valve, the HDPE-400 forms a practical basis for reliable swimming pool filtration.
Powerful filtration at 6.5 m³ per hour
During the filtration process, pool water is fed to the filter tank by the pool pump. In the tank, the water flows through the filter medium present, such as filter sand or filter glass. Small dirt particles are trapped within the filter material, after which the filtered water is returned to the pool.
With a maximum flow rate of 6.5 m³/h, or approximately 6,500 liters per hour, the HDPE-400 is a great intermediate size for pools where a smaller 350 mm sand filter does not provide sufficient capacity.
For optimal operation, it is important to choose a pool pump whose actual flow rate matches the capacity of the sand filter.
400 mm filter tank for a larger filter surface area
The HDPE-400 has a filter tank with a diameter of 400 mm. The larger filter surface area ensures that more filter medium is available to capture dirt from the pool water.
This offers various advantages. More dirt can be retained before a backwash becomes necessary, and the water can be effectively distributed through the filter bed.
The HDPE-400 is therefore an interesting choice when you want a compact installation but at the same time are looking for sufficient filtering capacity for daily use.
Compact Top Mount design
With this sand filter, the 6-way valve is located on top of the filter tank. This is what we call a Top Mount version.
The great advantage is that the sand filter takes up relatively little floor space. With a Side Mount version, the valve is next to the tank, which means more space is needed beside the sand filter.
This makes the W’eau HDPE-400 particularly suitable for placement in, for example, a technical room, technical box, garden shed, or compact pool installation.
Multifunctional 6-way valve
The integrated 6-way valve makes operating and maintaining the sand filter simple. With one lever, you select the desired function of the filter system.
The most important settings are Filter, Backwash, Rinse, Waste, Circulate and Closed. During normal use, the valve is set to Filter. To clean the filter medium, you use Backwash, after which you briefly rinse with Rinse. With Waste, you can send water directly to the drain, and Circulate lets the water circulate without passing it through the filter bed.
Important: always switch the pool pump off completely before changing the setting of the 6-way valve.
Easy cleaning with Backwash
Over time, more and more dirt collects in the filter medium. This increases the resistance in the filter tank, which can reduce flow.
With the Backwash function, you do not need to open the filter tank every time. The water flow is temporarily reversed, causing accumulated dirt to be loosened from the filter bed and discharged via the drain.
Afterwards, you use the Rinse function briefly to reposition the filter medium properly. Then, set the valve back to Filter and normal filtration can be resumed.
Suitable for filter sand and filter glass
The W’eau HDPE-400 can be filled with traditional filter sand or with suitable filter glass.
Filter sand is the traditional and economical choice for a sand filter. Filter glass is a popular alternative and, depending on the product chosen, can offer finer filtration and a longer service life.
Always use the correct grain size and amount of filter medium prescribed for the filter tank. An incorrect amount or grain size can negatively affect the performance of the sand filter.
Strong HDPE filter tank
The filter tank is manufactured from HDPE, or high-density polyethylene. This strong plastic is particularly suitable for use around swimming pools.
Unlike metal filter tanks, HDPE cannot rust. This is an important advantage in an environment where the material is constantly exposed to moisture and pool water.
The robust construction makes the HDPE-400 suitable for long-term use throughout the swimming season.
Suitable for above-ground and in-ground pools
Thanks to the combination of a 400 mm filter tank and a capacity of 6.5 m³/h, the W’eau HDPE-400 can be used for various types of private swimming pools.
It is, for example, suitable for larger frame pools, steel wall pools, wooden pools, and smaller permanent pools, provided the capacity of the complete installation is correctly matched to the pool volume.
Reliable filtration with extra capacity
The W’eau HDPE-400 Top Mount sand filter 6.5 m³/h is an excellent choice for those looking for a compact sand filter but who need more capacity than a standard 350 mm model can provide. The 400 mm HDPE filter tank, the maximum flow rate of 6.5 m³/h, and the practical 6-way valve make daily filtering and maintenance of the pool simple.
Thanks to the ability to use both filter sand and filter glass and the space-saving Top Mount design, the HDPE-400 is easy to integrate into various pool installations. A solid and user-friendly sand filter for clear pool water throughout the entire swimming season.
The W’eau HDPE-350 Top Mount sand filter is a compact and reliable solution for keeping small to medium-sized swimming pools clear and clean. With a maximum flow rate of 4.5 m³ per hour and a filter tank with a diameter of 350 mm, this sand filter is perfectly suited for private above-ground and in-ground pools with a volume of up to approximately 16 m³ (16,000 litres).
The filter tank is manufactured from sturdy polyethylene (PE/HDPE). This plastic material is particularly suitable for swimming pool installations thanks to its excellent resistance to moisture, weather conditions, and the pressure that builds up in the tank during the filtration process. This makes the W’eau HDPE-350 a solid foundation for a durable pool installation.
Effective filtration of swimming pool water
Good water circulation and filtration are essential for clear pool water. During filtration, the pool pump pumps water from the pool to the W’eau HDPE-350. The water is then guided through the filter medium in the filter tank.
Dirt particles are trapped by the filter material, after which the filtered water is returned to the pool. The HDPE-350 has a filtration fineness of approximately 25 to 30 microns, which filters small dirt particles, among other things, out of the pool water.
The sand filter therefore continuously helps to remove contamination that would otherwise remain floating in the pool water. In combination with the correct water treatment, this helps to keep the pool water clear and pleasant throughout the swimming season.
Capacity of 4.5 m³ per hour
The W’eau HDPE-350 has a maximum flow rate of 4.5 m³/h, or approximately 4,500 litres of water per hour. The sand filter is suitable for pools up to a maximum of approximately 16,000 litres.
It is important that the connected pool pump matches the capacity of the sand filter. A pump that is too powerful can force water through the filter medium too quickly, which may make filtration less effective and increase the load on the filter tank.
Space-saving Top Mount design
The HDPE-350 is designed as a Top Mount sand filter. This means that the 6-way valve is mounted on top of the filter tank.
The great advantage of this is a compact installation. With a Side Mount sand filter, the valve is located next to the filter tank, requiring more space around the tank. With the HDPE-350, the entire installation remains relatively narrow, making it ideal for placement in a technical room, garden shed, or compact pool setup.
With a diameter of approximately 350 mm and a height of about 750 mm, the filter takes up relatively little space.
Practical 6-way valve
The W’eau HDPE-350 features a multi-functional 6-way valve. This allows you to easily control how the pool water is directed through the installation.
The six positions are:
Filter: the standard operating mode. Pool water is passed through the filter medium and then returned clean to the pool.
Backwash: this reverses the water flow through the filter medium. Accumulated dirt is loosened from the filter bed and removed via the drain.
Rinse: used after backwashing to properly re-position the filter medium and flush out any remaining dirt through the drain.
Waste: pool water is led directly to the drain without passing through the filter medium. Useful when you want to lower the water level, for example.
Circulate: water circulates through the installation without passing through the filter medium.
Closed: shuts off the water flow through the 6-way valve.
Always switch off the pump before changing the position of the 6-way valve.
Easy cleaning through backwashing
A major advantage of a sand filter compared to many cartridge filters is its simple maintenance. The filter medium does not need to be removed from the filter and cleaned manually every time.
When the pressure in the filter tank increases or the water flow noticeably decreases, the filter can be cleaned using the Backwash function. The water then flows in the opposite direction through the filter bed and discharges the accumulated dirt.
After backwashing, use the Rinse setting briefly before setting the installation back to Filter.
Choice of various filter media
The filter tank has room for approximately 25 kg of filter material. When using traditional filter sand, about 25 kg of fine filter sand is required. For filter glass, a smaller amount is needed due to different material properties; for the comparable W’eau 350 filter, approximately 21–21.3 kg of fine filter glass is specified.
Filter glass is an interesting alternative to traditional filter sand. It has a long lifespan and can offer very good filtration depending on the product used. Always pay attention to the prescribed grain size and quantity of the chosen filter medium when filling.
Sturdy polyethylene filter tank
The filter tank of the HDPE-350 is manufactured from polyethylene. The great advantage of plastic is that it cannot rust and is perfectly suited for a humid swimming pool environment. Furthermore, the material is resistant to normal weather influences and the pressure load that occurs during filtration.
This makes the HDPE-350 a good choice for those looking for a solid filter tank without opting directly for a heavier, polyester-reinforced model.
50 mm connections
The W’eau HDPE-350 features a standard 50 mm connection. This allows the sand filter to be easily integrated into many permanent pool installations with 50 mm PVC piping.
For pools using flexible 32 or 38 mm pool hoses, suitable adapters or hose couplings may be required depending on the installation.
Suitable for above-ground and in-ground pools
Thanks to its compact size and capacity, the HDPE-350 is versatile. The sand filter can be used for both above-ground pools and smaller in-ground pools.
Especially for pools up to approximately 16,000 litres, the HDPE-350 offers a great combination of capacity, compact dimensions, and ease of use.
Compact sand filter for reliably clear pool water
The W’eau HDPE-350 Top Mount sand filter 4.5 m³/h is an especially strong choice if you are looking for a compact and user-friendly sand filter for a smaller pool. The sturdy polyethylene filter tank, fine 25–30 micron filtration, and the multifunctional 6-way valve ensure that you have all the important filter and maintenance functions in one installation.
Thanks to the space-saving Top Mount design, standard 50 mm connections, and the ability to use both filter sand and filter glass, the HDPE-350 is easy to integrate into a wide range of pool setups. A practical sand filter for anyone who wants to rely on good circulation and clear pool water throughout the swimming season.
Enjoy wonderfully warm water all season long with the W’eau Como Spa with heat pump – 4-person. This complete combination consists of the compact W’eau Como fixed spa and the W’eau Hybrid Spa heat pump of 5.2 kW. This allows you to combine the comfort of a luxurious fixed spa with a much more efficient way to heat the water and keep it at temperature.
The W’eau Como comfortably seats 4 people and features a smart layout with 3 seats and 1 lounger. The 20 massage jets are powered by a powerful 2 HP massage pump and provide a wonderful hydromassage. With Balboa control, UVC water purification, atmospheric LED lighting, and a water capacity of approximately 650 liters, the Como is surprisingly complete despite its compact dimensions.
The great advantage of this version is the included W’eau Hybrid Spa heat pump – 5.2 kW. Instead of heating the spa water exclusively with the traditional electric heater, the heat pump can extract a large portion of the required energy from the outside air. Especially when you use the spa regularly and want to keep it at temperature continuously, this can result in significant savings on electricity consumption.
Complete package: spa and 5.2 kW heat pump
With this model, you do not need to look for a suitable heat pump separately. The Como is prepared for the connection of an external spa heat pump and is supplied in this combination with the W’eau Hybrid Spa heat pump of 5.2 kW.
The heat pump works in conjunction with the spa's existing installation. You maintain the comfort of the integrated heater, while the external heat pump is used to heat the water more efficiently.
This makes this model particularly interesting for those who want to use the spa regularly or during a large part of the year.
W’eau Hybrid Spa heat pump – 5.2 kW
The included W’eau Hybrid Spa heat pump has a maximum heating capacity of 5.2 kW and has been specially developed for use with spas.
A heat pump works differently than a conventional electric heater. Instead of generating all heat directly from electricity, the heat pump draws energy from the outside air and transfers it to the spa water.
As a result, the heat pump can provide several kilowatts of heat for every kilowatt of electricity consumed under favorable conditions.
For a spa that is regularly kept at 37°C to 40°C, this can make a significant difference in energy consumption.
Hybrid heating: comfort and efficiency
The combination of a spa heater and an external heat pump is called hybrid heating.
The Como comes standard with a 2 kW Balboa heater. In this version, the external 5.2 kW spa heat pump is added.
This offers the best of both systems. The heat pump can be used for efficiently heating up and keeping the water warm, while the existing spa installation remains in place.
The advantage of the heat pump is especially evident when the spa is kept at temperature for longer periods.
4-person spa with lounger
The W’eau Como is designed for up to four people and has a practical layout:
1 comfortable lounger3 spacious seats
On the lounger, you can relax completely lying back, while the three seats offer a more upright position.
Because the different positions have their own jet distribution, you experience a different massage depending on where you sit. This allows you to easily switch seats during a spa session.
20 powerful massage jets
The Como features 20 hydromassage jets in various sizes. These are distributed across the lounger and the seats.
The spa features:
6 x 2-inch massage jets7 x 1-inch massage jets5 x 3.5-inch massage jets2 x 5-inch massage jets
The smaller jets provide a more targeted water stream, while the larger jets massage a wider area of the body.
This creates a varied massage for your back, shoulders, legs, and more.
Powerful 2 HP massage pump
The massage jets are powered by a powerful 2 HP two-speed massage pump.
When you want to relax, the pump can operate at a lower speed. When you activate the massage function, the pump provides sufficient water pressure to allow the 20 jets to massage powerfully.
As a result, the relatively compact Como still offers the massage experience you would expect from a full-sized fixed spa.
Balboa control
For control, the Como uses a Balboa BP200/TP500S control system.
Via the control panel, you can easily adjust the spa's main functions, such as the desired water temperature, massage pump, and lighting.
Balboa is a well-known manufacturer of spa electronics and is used in fixed spas worldwide.
UVC water purification
In addition to the standard filter system, the W’eau Como features UVC water purification.
During circulation, the water is passed by a UVC lamp. The UV radiation helps combat microorganisms in the circulating water.
The system is therefore a supplement to standard water treatment.
UVC does not mean that you no longer need any maintenance or water treatment products. The pH level and disinfectant level of the spa water must still be checked regularly.
Spa Filter Type 14
The W’eau Como uses the W’eau Spa Filter Type 14.
This cartridge filter captures small particles of dirt such as hair, dust, and skin flakes from the circulating water.
For good water quality, it is important to rinse the filter regularly. Depending on usage, the filter must also be cleaned thoroughly periodically and eventually replaced.
Atmospheric LED lighting
A spa is, of course, not only used during the day. That is why the Como features atmospheric RGB LED lighting with 6 colors.
The illuminated water provides a luxurious appearance, especially during dark evenings.
In addition, the Como has two LED cup holders. This gives you a convenient place for your drink while relaxing.
Compact size of 210 x 158 cm
The W’eau Como is an interesting choice if you do not have space for a large square spa.
With dimensions of only 210 x 158 cm, the model remains relatively compact. The height is approximately 73 cm.
This makes the Como an excellent fit for smaller gardens, terraces, or a compact wellness corner.
Despite its modest exterior dimensions, there is room inside for four people.
Only about 650 liters of water
The W’eau Como has a capacity of approximately 650 liters.
The relatively limited water volume is advantageous for heating. After all, a 650-liter spa requires less energy to reach temperature than a much larger spa with, for example, 1,200 or 1,500 liters of water.
In combination with the 5.2 kW hybrid heat pump, this creates a powerful combination for efficiently heating the spa.
Save energy with the insulating cover
In addition to the heat pump, insulation plays an important role in energy consumption.
A large part of a spa's heat loss occurs via the water surface. That is why the Como is supplied with an insulating spa cover.
Always place this over the spa when it is not in use. This keeps the heat in the water longer, and the heat pump has to use less energy to maintain the desired temperature.
A good cover makes a big difference, especially during cold nights.
230V spa
The W’eau Como itself runs on 230V, meaning no heavy 380V three-phase power installation is required for the spa.
Because an external heat pump is also connected with this version, the electrical installation must naturally be suitable for the total connected equipment.
Always use a correctly protected electrical connection for this and follow the installation instructions for both the spa and the heat pump.
Sturdy surface necessary
The Como weighs approximately 184 kg when empty. With about 650 liters of water, this increases to approximately 834 kg, not counting the weight of four users.
When four people are in the spa, the total weight can easily exceed 1,000 kg.
Therefore, only place the spa on a completely level, stable, and sufficiently load-bearing surface.
A suitable place with sufficient free space for air intake and exhaust must also be provided for the external heat pump.
The complete Como for more energy-efficient spa enjoyment
The W’eau Como Spa with heat pump – 4-person is particularly interesting if you look not only at the purchase of a spa, but also at the energy consumption during use.
You get the comfort of the Como with 4 seats, 20 massage jets, Balboa control, UVC water purification, and LED lighting, combined with a powerful W’eau Hybrid Spa heat pump of 5.2 kW.
The heat pump helps to heat the water much more efficiently than if you were solely dependent on the traditional electric spa heater. In combination with the included insulating cover, you can minimize heat loss as much as possible.
With the W’eau Como, you not only bring a compact wellness spa to your garden, but you immediately choose a complete setup focused on comfort, powerful massage, and more energy-efficient heating.
The W’eau Geneva Spa – 5-person is a luxurious permanent spa that combines comfort, powerful hydromassage, and energy-efficient operation. With room for up to 5 people, the Geneva is ideal for families, couples, or anyone who enjoys a complete wellness experience in their own garden with friends.
As with other premium W’eau spas, great attention has been paid to insulation, ease of use, and massage comfort. The spa combines high-quality construction with powerful massage jets and reliable spa technology, allowing you to relax in comfort all year round.
Luxury wellness for 5 people
The W’eau Geneva comfortably seats five people. The various seating and reclining positions are designed to make optimal use of the integrated massage jets. As a result, the back, shoulders, and legs are massaged by powerful water jets during use.
Thanks to the spacious shell, you have plenty of room to move without the spa becoming unnecessarily large. This makes the Geneva a great middle ground between a compact spa and a large 6-person model.
Powerful hydromassage
An important part of the Geneva is the extensive hydromassage system. The massage jets are strategically distributed across the various seats in the spa, allowing multiple parts of the body to be massaged simultaneously.
The powerful massage pump(s) ensure sufficient water pressure for the jets. This makes the Geneva suitable not only for quiet relaxation but also for a more intense massage after exercise or a long day at work.
Energy-efficient insulation
Good insulation is essential if you want to use a permanent spa regularly. The W’eau Geneva is therefore designed to limit heat loss as much as possible.
The insulating construction helps keep the heated water at temperature for longer. As a result, the heater does not have to reheat large volumes of water as often, which contributes to lower energy consumption.
In combination with a well-insulating spa cover, the heat is also retained as much as possible during cold days.
Reliable spa technology
The Geneva uses high-quality components for the control, heating, filtration, and massage functions of the spa. This makes the various functions easy to operate and allows you to set the spa to your preference.
Circulation and filtration ensure that the water is regularly guided through the filter system. The filter captures small dirt particles and helps keep the water clear and clean.
Comfortable seats and loungers
A spa is not just about the number of jets, but especially about how you sit in it. The W’eau Geneva therefore features ergonomically shaped seats that provide support during longer spa sessions.
The comfortable headrests provide extra neck and head support. This allows you to lean back and relax while the massage jets do their work.
Suitable for year-round use
Thanks to its high-quality insulation, the W’eau Geneva is excellently suited for use across different seasons. Even when the outside temperature drops, the water can be kept comfortably at temperature.
With properly configured filtration, correct water treatment, and the insulating cover, you can keep the spa ready for use, so you don't have to fill and heat it up every time.
Complete delivery
The W’eau Geneva is supplied with important accessories to get you started right away. An insulating spa cover helps prevent heat loss and stops leaves and other debris from easily getting into the water.
In addition, the spa filter ensures that small dirt particles are removed from the circulating water.
The W’eau Monaco Spa – 6-person is a luxury permanent spa for those who want to enjoy comfort, powerful hydromassage, and the lowest possible energy consumption at home. With its generous dimensions of 213 x 213 x 97 cm, the Monaco comfortably accommodates up to six people. Featuring no fewer than 72 massage jets, two powerful massage pumps, and a high-quality Balboa control system, this spa is designed for a complete wellness experience in your own garden.
What makes the W’eau Monaco special is the clever construction where the motors and technical components are housed in an external technical step. This allows the space around the shell to be fully insulated, keeping vibrations and motor noise out of the spa as much as possible. The result is a quiet, comfortable, and energy-efficient spa.
Fully insulated with Full Foam
For a permanent spa, insulation plays an important role in energy consumption. The W’eau Monaco is therefore equipped with Full Foam insulation. The space around the shell is completely filled with insulating foam, which greatly limits heat loss.
Because the technical installation does not need to be placed under the shell, almost the entire space can be used for insulation material. As a result, the warm water stays at temperature for longer and the heater does not need to kick in as often.
This makes the Monaco particularly suitable for users who want to use their spa regularly or for a large part of the year.
External technical step for a quiet spa
One of the most striking features of the W’eau Monaco is the external technical step. Instead of placing the massage pumps and other technology directly under the spa, they are located outside the shell in a specially designed step.
This has several advantages. Motor vibrations are less directly transmitted to the shell, so you experience less technical noise while relaxing. At the same time, it creates extra space around the shell for insulation.
Maintenance also becomes easier. By opening the technical step, important technical components are easily accessible without having to remove panels around the entire spa first.
No fewer than 72 massage jets
The Monaco is equipped with no fewer than 72 massage jets, distributed across the different seats. This allows you to enjoy an extensive hydromassage where various parts of the body can be massaged.
The jets are powered by two powerful LX massage pumps. By using two separate massage pumps, the spa has sufficient power to provide the large number of jets with a powerful water flow.
Whether you want to relax quietly or need a firm massage after a long day: the Monaco offers extensive possibilities for this.
Balboa control system
The spa is operated using a Balboa control system. Balboa is a well-known manufacturer of control systems and electronics for permanent spas.
Via the control panel, you can regulate the water temperature and various functions of the spa, among other things. The system also manages the heating, pumps, and other technical components.
Energy-efficient Gecko circulation pump
In addition to the two massage pumps, the W’eau Monaco has a separate Gecko circulation pump. This pump is specifically intended for circulating water through the filter system.
Because a heavy massage pump does not need to be switched on for this continuously, daily filtration can be more energy-efficient and quieter. This keeps the water in constant motion, allowing the filter to effectively remove dirt particles from the water.
Comfortable for up to 6 people
With an outer size of 213 x 213 cm, the W’eau Monaco is a spacious spa. It accommodates up to six people, making the model excellent for families, couples who like extra space, or social spa evenings with friends.
The spa also features comfortable, adjustable headrests. This allows you to adjust the support to your own sitting position.
Delivered complete
The W’eau Monaco is delivered complete, so you have important accessories right away. The spa comes with an insulating spa cover, spa filter, and entry step, among other things.
The cover not only helps to keep leaves and other debris out of the water, but also plays an important role in limiting heat loss when the spa is not in use.
Three-phase power connection
Due to the two powerful massage pumps, heating, and other technical equipment, the W’eau Monaco requires a 380V three-phase power connection.
It is therefore important to check before installation whether the correct electrical connection is available or can be installed by a certified electrician.
The Poolex HDPE-450 Opti Side Mount sand filter 7.8 m³/h is a durable and powerful sand filter for the efficient filtration of medium-sized swimming pools. With a maximum flow rate of 7.8 m³/h and a filter tank with a diameter of 450 mm, this filter offers an excellent combination of capacity, reliability, and ease of use.
The filter tank is manufactured from strong and recyclable HDPE (High Density Polyethylene). This material is excellently suited for long-term use in pool installations. The side-mounted 6-way valve (Side Mount) makes operation and maintenance simple while keeping the top of the filter tank clear.
According to Poolex, the HDPE-450 has a maximum capacity of 7.8 m³/h, a filter surface area of 0.16 m², and is designed for pools up to approximately 45 m³, assuming a filtration cycle of about 6 hours.
Side Mount 6-way valve
In this version, the 6-way valve is located on the side of the filter tank. This offers a practical setup for technical rooms and makes the top of the tank more accessible.
The main functions of the pool filtration can be set via the 6-way valve:
Filter – normal filtration of the pool water
Backwash – backwashing and cleaning the filter medium
Rinse – rinsing after a backwash
Waste – discharging water directly to the drain
Recirculate – circulating water without filtration
Closed – shutting off the water flow
In addition, the filter features a pressure gauge, which allows for easy monitoring of the pressure in the filter system.
Strong HDPE filter tank
The filter tank is made of recyclable high-density polyethylene (HDPE). The OPTI series has been developed with an emphasis on reliability, durability, and easy maintenance.
The tank has a diameter of 450 mm and a height of approximately 730 mm. Due to its compact dimensions, the filter can also be used in technical rooms where available space is limited.
For the HDPE-450, Poolex specifies a pool volume of up to approximately 45 m³ at a theoretical filtration time of about six hours.
For the best performance, it is important to match the capacity of the pool pump with the sand filter. Also, take into account pipe length, height differences, and other components that cause resistance.
Suitable for both filter sand and filter glass
The Poolex HDPE-450 can be filled with traditional filter sand or with suitable filter glass.
For this model, Poolex specifies the following quantities:
Filter sand: approximately 45 kgFilter glass: approximately 35 kg
Filter medium is not included as standard.
50 mm connections
The HDPE-450 is equipped with 1½″ / 50 mm connections. This makes the filter particularly suitable for pool installations with 50 mm PVC pipes, and it can be combined with various compatible pool pumps.
Why choose the Poolex HDPE-450 Opti Side Mount?
The Poolex HDPE-450 Opti Side Mount sand filter 7.8 m³/h is an excellent choice for those looking for a solid filter tank for a permanent or high-quality pool installation. The combination of a Ø450 mm HDPE tank, 7.8 m³/h capacity, 50 mm connections, 6-way valve, and pressure gauge makes this model both practical and durable.
With space for 45 kg of filter sand or approximately 35 kg of filter glass and a pool capacity of up to approximately 45,000 liters, this Poolex sand filter provides a reliable basis for clear and clean pool water.
Discover the comfort of a real spa combined with the installation ease of a portable spa with the NetSpa Vita 4-Person Semi-Rigid Spa. The Vita distinguishes itself from traditional inflatable spas with its sturdy semi-rigid construction featuring 8 cm thick foam panels. This makes the spa feel significantly more stable and luxurious, while still allowing it to be set up quickly and dismantled again if desired.
The round Vita comfortably accommodates up to 4 people and is designed for indoor and outdoor use. Thanks to its high-quality finish, woven PVC outer lining, and modern design, the spa fits perfectly on a terrace, in the garden, or in a suitable wellness room.
Semi-rigid construction with 8 cm thick foam walls
The major difference between the NetSpa Vita and a traditional inflatable spa lies in the construction. Instead of air chambers, the Vita uses dense 8 cm thick foam panels that are easily placed into the liner.
This construction offers several advantages. The walls feel firm when you lean your back against them, are less sensitive to temperature fluctuations, and offer better thermal insulation than conventional inflatable walls.
Furthermore, because there is no air-filled side wall, you do not need to constantly check the air pressure. The foam panels ensure the same sturdy shape season after season.
Comfortable floor with integrated foam mat
Much attention has also been paid to seating comfort. An insulating foam mat is integrated into the bottom of the liner, providing a comfortable layer between the user and the surface.
The combination of the soft floor and firm foam walls ensures that you can sit comfortably and relax with your back against the wall. At the same time, the insulating floor helps to limit heat loss to the ground.
Complete wellness with relaxing bubbles
The Vita is equipped with an integrated bubble system that disperses air bubbles through the water. The bubbles create a pleasant massage effect and make the spa ideal for completely unwinding after a long day.
With up to four people, you can enjoy the spa together with family or friends, but it also offers plenty of space when you want to relax alone or as a couple.
Intelligent NetSpa motor unit
The included NetSpa motor unit serves as the technical heart of the Vita. The main functions of the spa are controlled from one compact unit:
water filtration;
heating of the spa water;
air bubbles;
temperature control.
The operation is kept clear and simple, so you can activate the desired function in just a few steps.
Heat the water to a comfortable spa temperature
The heating system gradually brings the water to the desired temperature. This makes the Vita suitable not only for warm summer days, but also allows you to enjoy wonderfully warm spa water during cooler periods.
The insulating foam construction plays an important role here. The 8 cm thick foam walls limit heat loss and help retain the built-up heat in the water for longer.
For the best efficiency, it is important to always cover the spa properly while it is heating up and when it is not in use.
Integrated filtration for clear water
In addition to heating, the motor unit also handles the circulation and filtration of the water. During the filter process, the spa water is passed through the filter, where dirt particles are captured.
Combined with proper water treatment, this helps keep the water clean and clear. Regular cleaning and timely replacement of the filter cartridge remain important.
High-quality woven PVC finish
The exterior of the Vita features a luxurious woven PVC finish. This premium upholstery gives the spa a modern look and makes it significantly more stylish than many conventional inflatable spas.
The materials have been chosen for regular and long-term use. Moreover, the semi-rigid foam walls are much less vulnerable to sharp nails and claws than a traditional air chamber, making the Vita particularly interesting for households with pets.
Set up in about 15 minutes
Despite its sturdy construction, no permanent pool structure is required to install the Vita. The foam panels are simply placed into the designated liner.
According to NetSpa, the base structure can be set up in approximately 15 minutes. After that, you just need to connect the technical unit and fill the spa with water.
This allows you to benefit from many features of a fixed spa without major installation work.
Can be used indoors and outdoors
Thanks to its round shape and neat finish, the Vita is easy to integrate into different environments. Place it, for example, on a sturdy terrace, in a garden, under a canopy, or in a suitable indoor room.
The semi-rigid construction is more resistant to temperature changes than a standard inflatable structure. As a result, the Vita is designed to be used season after season.
Expandable with NetSpa furniture
Those who want to further complete their wellness area can combine the Vita with optional NetSpa furniture. Think, for example, of a surround for the technical part, a step, a towel rack, or a bench with cushions.
This allows you to build a complete wellness corner around the Vita where not only the spa itself, but also the surrounding area is neatly finished.
Why choose a semi-rigid NetSpa Vita?
A traditional inflatable spa derives its firmness from air pressure. With the Vita, however, the shape is determined by 8 cm thick foam panels.
This results in a number of important differences:
NetSpa Vita
Traditional inflatable spa
Wall construction
8 cm foam panels
Air chambers
Sturdiness
Very sturdy
Dependent on air pressure
Insulation
High insulation value
More limited
Checking air pressure
Not necessary
Necessary
Back support
Firm foam wall
Softer air wall
Puncture resistance
Much better
Higher risk
Assembly
Very simple
Very simple
Appearance
Premium spa look
Classic portable spa
This makes the Vita an interesting middle ground between an affordable inflatable spa and a much more expensive permanent acrylic spa.
With the W'eau Sand Filter Set with Mini Inverter Heat Pump, you choose a complete technical system that allows you to efficiently filter and comfortably heat your pool water. This carefully curated set includes all essential components to immediately create a reliable pool installation. Ideal for above-ground pools and smaller permanent pools where quality, ease of use, and energy efficiency are key.
The foundation of this technical set is a powerful W'eau sand filter system. Thanks to the combination of a robust filter tank and a reliable pool pump, dirt is effectively filtered out of the pool water. In combination with the included filter glass, even finer dirt is captured than with traditional filter sand. As a result, the water stays clear longer, requires less frequent backwashing, and saves you on water and maintenance.
For a pleasant swimming temperature, the set is equipped with a W'eau Mini Inverter pool heat pump. This compact heat pump automatically adjusts its power to the heat demand, making it quieter and more energy-efficient than a traditional on/off heat pump. This allows you to enjoy a comfortably heated pool for longer at lower energy costs.
To easily connect the heat pump, a Universal Bypass Kit is included. With the three valves, you can precisely regulate how much water flows through the heat pump. This ensures the heat pump always operates under ideal conditions and can be easily shut off for maintenance or winterizing.
In addition, you will receive a set of connection hoses, a protective cover for the heat pump, vibration dampers for quieter operation, and all necessary connection materials to finish the installation completely.
This complete technical set prevents you from having to combine separate components yourself. All components are matched to each other and together form a reliable and durable solution for years of swimming pleasure.
Package contents
W'eau FSF-350 Sand Filter Set – 4 m³/h
W'eau Mini Inverter pool heat pump – 6 kW
W'eau Mini Inverter protective cover
W’eau vibration dampers for mini heat pumps
Bypass kit for heat pump universal
1 × Filter glass fine – 20 kg
Protect your spa optimally against weather influences with the W'eau Iseo Spa Protective Cover 210 x 110 x 85 cm. This high-quality protective cover has been specially developed to protect both the spa cover and the entire spa cabinet against rain, snow, UV radiation, leaves, dust, and other dirt. Thanks to the extra-high design, not only does the cover stay clean, but the entire exterior of the spa is also protected. This significantly extends the lifespan of both the spa and the cover.
The protective cover is made of strong, water-resistant, and breathable polyester. This high-quality material prevents rainwater from soaking into the spa cover, which helps keep the cover from becoming heavy. At the same time, the breathable material ensures that moisture can escape, limiting condensation and mold formation.
With dimensions of 210 x 110 x 85 cm, this protective cover is perfectly suited for spas with an outer dimension of 210 x 110 cm. The cover has an overlap of approximately 10 cm all around and is equipped with a sturdy drawstring, making it easy to fasten tightly around the spa. This keeps the cover neatly in place, even in strong winds.
In addition to protection against dirt, the cover also prevents the spa cabinet from discoloring due to sunlight and reduces wear and tear caused by rain, frost, and temperature fluctuations. This keeps your spa looking like new for longer and means you have to spend less time on maintenance.
For optimal results, it is recommended to create sufficient ventilation under the cover. For example, place a bucket or ball under the cover so that rainwater runs off easily and no water pockets form. Additionally, remove the cover regularly so that the spa cover can air out properly.
The W'eau Iseo Spa Protective Cover is the ideal choice for spa owners who want to optimally protect their investment and enjoy a neat, clean, and well-maintained spa for years to come.
With the W'eau Sand Filter Set with Mini Inverter Heat Pump, you choose a complete technical system that allows you to efficiently filter and comfortably heat your pool water. This carefully curated set includes all essential components to immediately create a reliable pool installation. Ideal for above-ground pools and smaller permanent pools where quality, ease of use, and energy efficiency are paramount.
The foundation of this technical set is a powerful W'eau sand filter set. Thanks to the combination of a robust filter vessel and a reliable pool pump, dirt is effectively filtered out of the pool water. In combination with the included filter glass, even finer dirt is captured than with traditional filter sand. As a result, the water stays clear for longer, requires less frequent backwashing, and saves you on water and maintenance.
For a pleasant swimming temperature, the set is equipped with a W'eau Mini Inverter pool heat pump. This compact heat pump automatically adjusts its output to the heating demand, making it quieter and more energy-efficient than a traditional on/off heat pump. This allows you to enjoy a comfortably heated pool for longer at lower energy costs.
To easily connect the heat pump, a Universal Bypass Kit is included. With the three valves, you can precisely regulate how much water flows through the heat pump. This ensures the heat pump always operates under ideal conditions and can be easily shut off for maintenance or winterizing.
In addition, you will receive a set of connection hoses, a protective cover for the heat pump, vibration dampers for quieter operation, and all necessary connection materials to complete the installation.
This complete technical set saves you from having to combine separate parts yourself. All components are matched to each other and together form a reliable and durable solution for years of swimming pleasure.
Package contents
W'eau FSF-350 Sand Filter Set – 4 m³/h
W'eau Mini Inverter pool heat pump – 6 kW
W'eau Mini Inverter protective cover
W’eau vibration dampers for mini heat pumps
Universal heat pump bypass kit
1 × Fine filter glass – 20 kg
With the W'eau FSF-500 Sand Filter Set 12 m³/h + Full Inverter 13.5 kW – Up to 48 m³, you are choosing a complete and professionally assembled technical set to optimally filter and energy-efficiently heat your swimming pool. This complete installation is specially designed for swimming pools up to 48,000 liters and includes all essential components for a reliable, durable, and easy-to-install pool setup.
The basis of this technical set is the W'eau FSF-500 sand filter set with a design flow rate of 12 m³/h. Thanks to the powerful self-priming pool pump, this filter set is suitable for both above-ground and in-ground pools and performs excellently at low, medium, and high pipe resistance. This makes the system ideal for use in combination with a heat pump, automatic pool cleaner, or extensive piping. The extra-reinforced PE filter vessel with polyester reinforcement can withstand a maximum operating pressure of 2.5 bar and guarantees years of reliable performance. The 6-way valve provides all necessary functions for easy maintenance and optimal water quality.
For a comfortable swimming temperature, this technical set is equipped with the W'eau Full Inverter 13.5 kW pool heat pump. Thanks to Full Inverter technology, the heat pump automatically adjusts its compressor and fan power to the current heating demand. As a result, the pool reaches the desired temperature faster, the temperature remains stable, and energy consumption is significantly reduced compared to traditional on/off heat pumps. The titanium heat exchanger also makes the heat pump suitable for both chlorine and saltwater pools.
This complete technical set comes with a Luxury Bypass Kit, 12 meters of PVC Flex Hose (50 mm), and sufficient filter glass for the sand filter. The bypass kit allows you to easily adjust the ideal water flow through the heat pump so that it always operates at maximum efficiency. The included filter glass filters more finely than traditional filter sand, ensuring that dirt particles are captured better and the pool water stays clear and clean for longer.
Because all components are perfectly matched, you don't have to search for separate products yourself. You receive one complete package that allows you to get started immediately. This saves time, prevents incompatible parts, and ensures a reliable pool installation that functions without issues for years.
This complete technical set is ideal for pool owners looking for a powerful, durable, and energy-efficient solution for filtering and heating pools up to 48 m³.
Package contents
W'eau FSF-500 Sand Filter Set – 12 m³/h
W'eau Full Inverter pool heat pump – 13.5 kW
Separate cable with plug (from 0.75 kW)
W'eau Full Inverter heat pump protective cover
W’eau vibration dampers for heat pumps
Bypass kit for heat pump basic
W’eau Heater Cleaner heat pump cleaner
PVC Flex Hose 50 mm – 12 meters
4 × Filter glass fine – 20 kg
With the W'eau FSF-450 Sand Filter Set 8 m³/h + Full Inverter 10.5 kW – Up to 36 m³, you get a complete technical package for efficiently filtering and heating swimming pools of up to 36,000 liters. This carefully curated set includes a powerful W'eau sand filter system, an energy-efficient Full Inverter heat pump, and all the necessary installation materials for a professional and reliable pool setup.
The W'eau FSF-450 sand filter set features a design flow rate of 8 m³/h and is suitable for both above-ground and inground swimming pools. Thanks to the powerful self-priming pool pump, this filter set is excellently suited for installations with low, medium, and high pipe resistance. This allows you to easily connect a heat pump, pool vacuum, or other pool accessories without sacrificing performance. The robust filter vessel is manufactured from polyester-reinforced polyethylene, making it resistant to intensive use and a maximum operating pressure of 2.5 bar. The integrated 6-way valve offers all the necessary functions for simple maintenance and optimal water quality.
For a comfortable swimming temperature, this technical set is equipped with the W'eau Full Inverter 10.5 kW pool heat pump. Thanks to advanced Full Inverter technology, the heat pump automatically adjusts the compressor and fan power to the current heat demand. This allows the pool to heat up faster, keeps the temperature stable, and significantly reduces energy consumption compared to traditional on/off heat pumps. The titanium heat exchanger also makes the heat pump suitable for both chlorine and saltwater pools.
To complete the installation, this technical set is delivered including a Deluxe Bypass Kit, 12 meters of PVC flex hose (50 mm), and sufficient filter glass for the sand filter. With the bypass kit, you can easily adjust the ideal water flow through the heat pump, ensuring it always operates at maximum efficiency. The included filter glass filters more finely than traditional filter sand, meaning dirt particles are removed more efficiently and the pool water stays clear for longer.
All components are perfectly matched, so you don't have to search for individual products yourself. You receive one complete package that is easy to install and ready for immediate use. This saves you time, prevents incompatible parts, and ensures you benefit from a reliable installation with a long lifespan.
This complete technical set is ideal for pool owners looking for a powerful, durable, and energy-efficient solution for filtering and heating pools up to 36 m³.
Package contents
W'eau FSF-450 Sand filter set – 8 m³/h
W'eau Full Inverter pool heat pump – 10.5 kW
Loose cable with plug (from 0.75 kW)
W'eau Full Inverter heat pump protective cover
W’eau vibration dampers for heat pumps
Basic bypass kit for heat pump
W’eau Heater Cleaner heat pump cleaner
PVC flex hose 50 mm – 12 meters
2 × Filter glass fine – 20 kg
With the W'eau FSF-400 Sand Filter Set 6 m³/h + Full Inverter 7.6 kW – Up to 24 m³, you have a complete and professionally assembled technical set for swimming pools up to 24,000 liters. This complete package combines a powerful sand filter system, an energy-efficient Full Inverter heat pump, and all necessary installation materials. This ensures you crystal-clear pool water and a pleasant water temperature throughout the entire swimming season.
The W'eau FSF-400 sand filter set forms the heart of this installation. With a design flow rate of 6 m³/h, this filter set is ideal for both above-ground and in-ground pools up to 24 m³. The self-priming pump ensures reliable water circulation and is suitable for installations with both low and high pipe resistance. Thanks to the polyester-reinforced filter vessel, the system is resistant to intensive use and a maximum operating pressure of 2.5 bar. The integrated 6-way valve makes filtering, backwashing, rinsing, circulating, emptying, and closing simple and fast.
For a comfortably heated pool, this technical set comes with the W'eau Full Inverter 7.6 kW swimming pool heat pump. Thanks to Full Inverter technology, the heat pump automatically adjusts the compressor and fan power to the heat demand. As a result, the pool is heated efficiently with significantly lower energy consumption than traditional on/off heat pumps. Furthermore, the quiet operation ensures you can enjoy your pool undisturbed.
This complete technical set is supplied including a Luxury Bypass Kit, 12 meters of PVC Flexible Hose (50 mm), and sufficient filter glass for the sand filter. With the bypass, you can easily regulate the ideal water flow through the heat pump, ensuring it always performs optimally. The filter glass provides finer filtration than traditional filter sand, effectively removing even small dirt particles and keeping the pool water clear for longer.
Because all components are perfectly matched, you no longer need to combine individual products yourself. You receive one complete package that is easy to install and ready for immediate use. This not only saves time but also ensures a reliable and efficient pool installation.
This technical set is the ideal choice for pool owners looking for a complete, durable, and energy-efficient solution for filtering and heating pools up to 24 m³.
Package contents
W'eau FSF-400 Sand Filter Set – 6 m³/h
W'eau Full Inverter swimming pool heat pump – 7.6 kW
Separate cable with plug (from 0.75 kW)
W'eau Full Inverter heat pump protective cover
W’eau vibration dampers for heat pumps
Bypass kit for basic heat pump
W’eau Heater Cleaner heat pump cleaner
PVC Flexible Hose 50 mm – 12 meters
2 × Filter glass fine – 20 kg
With the W'eau MFV-17 Variable Sand Filter Set 8 m³/h + Full Inverter 13.5 kW – Up to 36 m³, you choose a complete and professionally curated technical package that allows you to efficiently filter and energy-efficiently heat your swimming pool. This complete installation is specifically designed for swimming pools up to 36,000 liters and includes all essential components for reliable, durable, and easy-to-install pool technology.
The foundation of this technical set is the W'eau MFV-17 variable sand filter set with a design flow rate of 8 m³/h. Thanks to the variable pool pump, the system always operates at the most efficient speed. This allows you to save significantly on energy costs while the pool water remains continuously clear and clean. The powerful self-priming pump is suitable for both above-ground and built-in pools and performs excellently, even in installations with higher resistance. The sand filter features a durable 6-way valve that allows you to easily filter, backwash, rinse, circulate, drain, and close.
For a pleasant water temperature, this technical set is equipped with the W'eau Full Inverter 13.5 kW swimming pool heat pump. Thanks to Full Inverter technology, the heat pump automatically adjusts its compressor and fan speed to the heat demand of the pool. As a result, the pool heats up faster, the temperature remains stable, and energy consumption is significantly reduced compared to traditional on/off heat pumps.
To complete the installation, this technical set comes with a Deluxe Bypass Kit, 12 meters of 50 mm PVC flexible hose, and sufficient filter glass for the sand filter. With the bypass, you can easily regulate the ideal water flow through the heat pump, ensuring it always performs optimally. Furthermore, the filter glass provides finer filtration than traditional filter sand, capturing dirt particles more effectively and keeping the pool water crystal clear for longer.
All components are carefully matched, so you do not have to search for individual parts yourself. You receive one complete package that allows you to get started immediately. This makes the installation simpler, more reliable, and often more cost-effective than purchasing all components separately.
This complete technical set is ideal for both above-ground and inground pools up to 36 m³ and offers years of reliable performance, low energy consumption, and optimal swimming comfort.
Package contents
W'eau MFV-20 Variable Sand Filter Set – 8 m³/h
W'eau Full Inverter swimming pool heat pump – 13.5 kW
Loose cable with plug (from 0.75 kW)
W'eau Full Inverter heat pump protective cover
W’eau vibration dampers for heat pumps
Bypass kit for heat pump basic
W’eau Heater Cleaner heat pump cleaner
PVC Flexible hose 50 mm – 12 meters
2 × Filter glass fine – 20 kg
With the W'eau MFV-20 Variable Sand Filter Set 12 m³/h + Full Inverter 17.5 kW – Up to 48 m³, you are choosing a complete and professionally assembled technical package that optimally filters and efficiently heats your pool. This complete installation has been specially designed for swimming pools of up to 48,000 liters and contains only high-quality components that are perfectly matched to one another.
The foundation of this technical set is the W'eau MFV-20 variable sand filter set with a maximum pump capacity of 12 m³/h. Thanks to the energy-efficient variable pool pump, the system always runs at the ideal speed. This means you consume significantly less power than with a traditional pool pump, while the pool water remains continuously clear and clean. The robust sand filter features a durable polyester-reinforced filter vessel and a 6-way valve with all necessary filter functions for easy maintenance and optimal performance. The set is also supplied Plug & Play with connection material for 50, 38, and 32 mm connections.
For a pleasant water temperature, this technical set is equipped with the W'eau Full Inverter 17.5 kW pool heat pump. Thanks to Full Inverter technology, the heat pump automatically adjusts its output based on the pool's heating demand. As a result, the pool is heated more quickly, the temperature remains stable, and energy consumption is significantly lower than with traditional on/off heat pumps.
To complete the installation, this technical set comes with a Bypass Kit, PVC Flex Hose 50 mm, and sufficient filter glass for the sand filter. With the bypass kit, you can easily regulate the ideal water flow through the heat pump, ensuring it always operates at maximum efficiency. The included filter glass provides finer filtration than traditional filter sand, capturing dirt particles more effectively and keeping the pool water crystal clear for longer.
Because all parts are perfectly matched in advance, you do not need to search for individual components yourself. You receive one complete package that allows you to get started immediately. This makes the installation simpler, more reliable, and often more cost-effective than purchasing all the parts separately.
This complete technical set is suitable for both above-ground and inground pools up to 48 m³ and offers years of reliable performance, low energy consumption, and maximum swimming comfort.
Package contents
W'eau MFV-20 Variable Sand Filter Set – 12 m³/h
W'eau Full Inverter pool heat pump – 17.5 kW
Loose cable with plug (from 0.75 kW)
W'eau Full Inverter heat pump protective cover 89 x 42 x 57 cm
W’eau vibration dampers for heat pumps
Bypass kit for basic heat pump
W’eau Heater Cleaner heat pump cleaner
PVC Flex Hose 50 mm – 12 meters
4 × Filter glass fine – 20 kg
With the W'eau MFV-24 Variable Sand Filter Set 16 m³/h + Full Inverter 21 kW – Up to 64 m³, you are choosing a complete and professionally assembled technical package for swimming pools up to 64,000 liters. This high-quality set combines an energy-efficient variable sand filter system with a powerful Full Inverter heat pump, including all necessary materials for a quick and professional installation. This allows you to enjoy crystal clear and wonderfully heated pool water throughout the entire swimming season.
The foundation of this technical set is the W'eau MFV-24 variable sand filter set with a maximum pump capacity of 16 m³/h. Thanks to the variable speed, the pump never runs harder than necessary. This leads to significant energy cost savings, reduces noise levels, and increases the pump's service life. Furthermore, the sand filter features a robust polyester-reinforced filter vessel and a 6-way valve with all necessary filter functions.
For an optimally heated pool, this technical set is equipped with the W'eau Full Inverter 21 kW swimming pool heat pump. Thanks to Full Inverter technology, the heat pump automatically adjusts its output based on the heating demand. As a result, the pool reaches the desired temperature faster, while energy consumption is significantly lower than with traditional heat pumps. The integrated Wi-Fi module allows for smartphone control, and the titanium heat exchanger is suitable for both chlorine and saltwater pools.
To complete the installation, this technical set is supplied with a Deluxe Bypass Kit, 12 meters of PVC flex hose (50 mm), and sufficient filter glass for the sand filter. Thanks to the bypass kit, you can easily regulate the ideal water flow through the heat pump, ensuring it always operates at maximum efficiency. The included filter glass provides finer filtration than traditional filter sand, keeping the pool water clear for longer and requiring less maintenance.
Because all parts are carefully matched, you don't have to search for individual components yourself. You receive a complete technical set that allows you to get started right away. This makes the installation simpler, more reliable, and often more cost-effective than purchasing all parts separately.
This complete technical set is ideal for both large above-ground pools and inground pools up to 64 m³ and offers years of reliable performance, low energy consumption, and maximum swimming comfort.
Package contents
W'eau MFV-24 Variable Sand Filter Set – 16 m³/h
W'eau Full Inverter swimming pool heat pump – 21 kW
Separate cable with plug (from 0.75 kW)
W'eau Full Inverter heat pump protective cover 89 x 42 x 57 cm
W’eau vibration dampers for heat pumps
Bypass kit for basic heat pump
W’eau Heater Cleaner heat pump cleaner
PVC Flex hose 50 mm – 12 meters
6 × Filter glass fine – 20 kg
2 × Filter glass coarse – 20 kg
The W’eau replacement microfiber brush is a separate sleeve designed for easily replacing a worn or dirty brush head. By replacing only the sleeve, you maintain the effectiveness of your cleaning equipment without the need for an entirely new frame. The sleeve is made from soft, absorbent microfibers specifically selected for gently removing grease, dust, and light buildup on the waterline and pool walls.Simple assembly and maintenanceThe sleeve features a sturdy Velcro closure on the inside, allowing it to be secured tightly around the plastic frame of the W’eau microfiber brush in seconds. The open structure of the fibers ensures that dirt is held well during use, but is also easily released when rinsed. After use, the sleeve can be cleaned by hand, keeping it hygienic and ready for the next maintenance session.
Protect and insulate your MSpa Denver or Rova spa!The MSpa Denver or Rova insulating protective cover is the ideal solution to keep your spa in top condition. Thanks to its insulating properties, the water retains heat longer, meaning your spa uses less energy to maintain its temperature. This results in energy savings of up to 40%! In addition, the cover prevents dirt such as leaves and twigs from getting into your spa, keeping the water clean for longer.With a size of 188, this protective cover is perfectly designed for the MSpa Denver or Rova. The cover is easy to install and is securely fastened with a drawstring, ensuring it stays in place even in wind and rain.With the MSpa Denver or Rova insulating protective cover, you ensure a more efficient and cleaner spa experience. Protect your spa optimally and save on energy costs!
The Intex Graphite Prism Panel Pool Ø 478 x 124 cm combines the natural look of wood with the benefits of a modern above-ground pool. Thanks to its stylish graphite panels and robust construction, this pool is a real eye-catcher in any garden. With a generous diameter of 478 cm and a depth of 124 cm, it offers plenty of space to enjoy swimming, cooling off, and relaxing with the whole family.
This complete pool set comes with a powerful sand filter pump and various accessories, so you can immediately enjoy clean and clear pool water.
Stylish Graphite finish
The exterior of the pool features durable Graphite panels with a luxurious wood look. This gives the pool an exclusive appearance that fits perfectly into both modern and classic gardens. Unlike real wood, the panels are low-maintenance and resistant to various weather conditions.
Strong Prism Frame construction
The Intex Graphite Prism Pool is built on a sturdy Prism Frame made of powder-coated steel. This corrosion-resistant construction ensures optimal stability and a long service life. The inner liner is made of strong Super-Tough® PVC, consisting of three layers with a polyester core for extra strength and wear resistance.
Includes sand filter pump
For optimal water quality, this pool is supplied with a powerful Intex sand filter pump. A sand filter pump offers excellent filtration, requires less maintenance than a cartridge filter, and ensures that the pool water remains clear for a long time.
Depending on the configuration, the pump can be filled with filter sand or filter glass.
Complete pool set
With this complete pool set, you have almost everything you need to start swimming right away.
The set includes:
Intex sand filter pump
Safety ladder
Ground cloth
Pool cover
Connection hoses and fittings
Manual
Ideal for the whole family
Thanks to its spacious dimensions, this pool offers enough room for swimming, playing, and relaxing. The water depth makes the pool suitable for both older children and adults.
For extra comfort, the pool can be easily expanded with a heat pump, saltwater system, automatic pool robot, or LED lighting.
The W'eau SC-050 swimming pool pump 10 m³ is the ideal choice for pool owners looking for a powerful, reliable, and affordable swimming pool pump. This pump is the big brother of the popular W'eau SS-series and offers more power, a higher head, and better performance in installations with longer pipes or slight height differences.
Thanks to its powerful motor and excellent price-quality ratio, the W'eau SC-050 is perfectly suited for small to medium-sized above-ground and in-ground pools. In addition, the pump operates remarkably quietly and consumes less energy than many comparable pool pumps in the same price range.
Suitable for pools up to 38 m³
The W'eau SC-050 is recommended for pools with a maximum capacity of 38 m³. The pump delivers excellent performance in installations with low to medium resistance, making it ideal for pools with a sand filter system, heat pump, or longer pipes.
The pump is suitable for:
Pools up to 38,000 liters
Piping of approximately 10 to 30 meters
Placement above or below the water level
Slight height differences
Average hydraulic resistance
Normal to powerful vacuuming
For installations with very long pipes or a lot of extra equipment, we recommend an even more powerful swimming pool pump.
More power than the SS-series
While the SS-series is mainly suitable for short piping runs, the SC-series delivers significantly better performance at medium resistance. This keeps the water circulation optimal, even when the piping is longer or the pump is placed above the water level.
With a capacity of 14.5 m³ per hour at low resistance and 9.5 m³ per hour at medium resistance, the W'eau SC-050 ensures efficient filtering of the pool water.
Supplied complete and easy to install
The W'eau SC-050 is supplied complete so you can start the installation immediately.
The pump is supplied including:
50 mm unions
1.5 inch threaded connections
Plug
Transparent filter lid
This makes the pump easy to connect to almost any standard pool installation.
Safe and reliable
The W'eau SC-050 is equipped with various safety features for safe operation.
For example, the pump has:
Thermal protection against overheating
Insulation class B (maximum 130°C)
IP55 protection class (dust and splash-proof)
Fan-cooled motor
In addition, the pump is fully suitable for saltwater pools, allowing it to be combined with a salt water system without any problems.
Simple maintenance
Through the transparent filter lid, you can easily check when the filter basket needs to be emptied. This prevents clogs and keeps the water circulation optimal.
Thanks to its self-priming function, the pump is also easy to restart after maintenance.
The W'eau SS-033 pool pump 8 m³ is a compact, reliable, and competitively priced pool pump specifically developed for small above-ground and built-in pools. Thanks to its excellent price-quality ratio, this pump is ideal for pool owners looking for a simple yet efficient solution for circulating and filtering pool water.
The pump delivers a maximum capacity of 9 m³ per hour (manufacturer specification) and performs best in systems with low resistance. This includes short pipe runs, few bends, and placement at or below the water level. This makes the W'eau SS-033 perfectly suited for compact pools where reliable water circulation is important.
Ideal for pools up to 8 m³
The W'eau SS-033 is recommended for pools with a capacity of up to 8,000 liters. Thanks to the powerful water circulation, the pool water remains clean and clear when the pump is combined with a suitable sand filter or cartridge filter.
The pump is designed for installations with:
Short pipes (up to approx. 5 meters)
Minimal height difference
Low hydraulic resistance
Light vacuuming work
For installations with longer pipes, many bends, or a heat pump, we recommend a more powerful pool pump.
Complete delivery
The W'eau SS-033 is supplied complete and is ready for immediate installation. The pump is equipped with:
50 mm couplings
1.5" threaded connections
RCD safety plug
Transparent pre-filter lid
This makes installation simple and allows you to get started right away.
Safe and reliable
Safety is paramount with the W'eau SS-033. The pump features thermal protection that automatically cuts the power when the motor gets too hot. In addition, the pump has an IP55 protection rating, making it well-resistant to dust and splashing water.
The motor is cooled by a powerful fan, and the class B insulation ensures a maximum internal temperature of 130°C.
Transparent pre-filter
The transparent filter lid allows you to easily check whether the filter basket needs emptying. This prevents blockages and keeps the pump performing optimally.
Why choose the W'eau SS-033?
The W'eau SS-033 pool pump 8 m³ is the ideal choice for smaller pools where reliability, simplicity, and a competitive price are important. Thanks to the complete delivery, simple installation, and safe operation, this pump is perfect for pool owners looking for a low-maintenance solution for optimal water circulation. In an installation with short pipes and low resistance, the W'eau SS-033 delivers excellent performance, allowing you to enjoy clean and clear pool water all summer long.
